| Age | Commit message (Collapse) | Author |
|---|
|
There are some assembly macros with very generic naming
being defined asm.h. They are clashing with other macros
from C code.
Guard them with __ASSEMBLY__ to prevent futher clashes.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/linux-mips/8d78894-dd89-9f4d-52bb-1b873c50be9c@linux-m68k.org/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
early_tlb_init() and rb532_gpio_init() were local to file but not declared
static, leading to error:
arch/mips/rb532/prom.c:49:13: error: no previous prototype for ‘prom_setup_cmdline’ [-Werror=missing-prototypes]
49 | void __init prom_setup_cmdline(void)
| ^~~~~~~~~~~~~~~~~~
arch/mips/rb532/gpio.c:200:12: error: no previous prototype for ‘rb532_gpio_init’ [-Werror=missing-prototypes]
200 | int __init rb532_gpio_init(void)
| ^~~~~~~~~~~~~~~
Signed-off-by: Yongzhen Zhang <zhangyongzhen@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
early_tlb_init() was local to file but not declared static,
leading to error:
arch/mips/bcm47xx/prom.c:126:6: error: no previous prototype for ‘early_tlb_init’ [-Werror=missing-prototypes]
126 | void early_tlb_init(void)
| ^~~~~~~~~~~~~~
Signed-off-by: Yongzhen Zhang <zhangyongzhen@kylinos.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
bcm47xx_prom_highmem_init() is a global function declared in
arch/mips/bcm47xx/bcm47xx_private.h, but this header is not
included before the definition, causing a error:
arch/mips/bcm47xx/prom.c:134:13: error: no previous prototype for ‘bcm47xx_prom_highmem_init’ [-Werror=missing-prototypes]
134 | void __init bcm47xx_prom_highmem_init(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Yongzhen Zhang <zhangyongzhen@kylinos.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel
crash when invoked during real mode interrupt handling (e.g. early HMI/MCE
interrupt handler) if percpu allocation comes from vmalloc area.
Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI()
wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when
percpu allocation is from the embedded first chunk. However with
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu
allocation can come from the vmalloc area.
With kernel command line "percpu_alloc=page" we can force percpu allocation
to come from vmalloc area and can see kernel crash in machine_check_early:
[ 1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110
[ 1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0
[ 1.215719] --- interrupt: 200
[ 1.215720] [c000000fffd73180] [0000000000000000] 0x0 (unreliable)
[ 1.215722] [c000000fffd731b0] [0000000000000000] 0x0
[ 1.215724] [c000000fffd73210] [c000000000008364] machine_check_early_common+0x134/0x1f8
Fix this by avoiding use of nmi_enter()/nmi_exit() in real mode if percpu
first chunk is not embedded.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Shirisha Ganta <shirisha@linux.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240410043006.81577-1-mahesh@linux.ibm.com
|
|
JUMP_LABEL_FEATURE_CHECK_DEBUG used static_key_intialized to determine
whether {cpu,mmu}_has_feature() is used before static keys were
initialized. However, {cpu,mmu}_has_feature() should not be used before
setup_feature_keys() is called but static_key_initialized is set well
before this by the call to jump_label_init() in early_init_devtree().
This creates a window in which JUMP_LABEL_FEATURE_CHECK_DEBUG will not
detect misuse and report errors. Add a flag specifically to indicate
when {cpu,mmu}_has_feature() is safe to use.
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240408052358.5030-1-nicholas@linux.ibm.com
|
|
Introduce arch_try_cmpxchg64_local() for 64-bit and 32-bit targets
to improve code using cmpxchg64_local(). On 64-bit targets, the
generated assembly improves from:
3e28: 31 c0 xor %eax,%eax
3e2a: 4d 0f b1 7d 00 cmpxchg %r15,0x0(%r13)
3e2f: 48 85 c0 test %rax,%rax
3e32: 0f 85 9f 00 00 00 jne 3ed7 <...>
to:
3e28: 31 c0 xor %eax,%eax
3e2a: 4d 0f b1 7d 00 cmpxchg %r15,0x0(%r13)
3e2f: 0f 85 9f 00 00 00 jne 3ed4 <...>
where a TEST instruction after CMPXCHG is saved. The improvements
for 32-bit targets are even more noticeable, because double-word
compare after CMPXCHG8B gets eliminated.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20240414161257.49145-1-ubizjak@gmail.com
|
|
Pick up perf/urgent fixes that are upstream already, but not
yet in the perf/core development branch.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When running as Xen PV guest in some cases W^X violation WARN()s have
been observed. Those WARN()s are produced by verify_rwx(), which looks
into the PTE to verify that writable kernel pages have the NX bit set
in order to avoid code modifications of the kernel by rogue code.
As the NX bits of all levels of translation entries are or-ed and the
RW bits of all levels are and-ed, looking just into the PTE isn't enough
for the decision that a writable page is executable, too.
When running as a Xen PV guest, the direct map PMDs and kernel high
map PMDs share the same set of PTEs. Xen kernel initialization will set
the NX bit in the direct map PMD entries, and not the shared PTEs.
Fixes: 652c5bf380ad ("x86/mm: Refuse W^X violations")
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240412151258.9171-5-jgross@suse.com
|
|
Modify _lookup_address_cpa() to no longer use lookup_address(), but
only lookup_address_in_pgd().
This is done in preparation of using lookup_address_in_pgd_attr().
No functional change intended.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240412151258.9171-4-jgross@suse.com
|
|
Fix show_fault_oops() to not only look at the leaf PTE for detecting
NX violations, but to use the effective NX value returned by
lookup_address_in_pgd_attr() instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240412151258.9171-3-jgross@suse.com
|
|
Add lookup_address_in_pgd_attr() doing the same as the already
existing lookup_address_in_pgd(), but returning the effective settings
of the NX and RW bits of all walked page table levels, too.
This will be needed in order to match hardware behavior when looking
for effective access rights, especially for detecting writable code
pages.
In order to avoid code duplication, let lookup_address_in_pgd() call
lookup_address_in_pgd_attr() with dummy parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240412151258.9171-2-jgross@suse.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Follow up fixes for the BHI mitigations code
- Fix !SPECULATION_MITIGATIONS bug not turning off mitigations as
expected
- Work around an APIC emulation bug when the kernel is built with Clang
and run as a SEV guest
- Follow up x86 topology fixes
* tag 'x86-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Move TOPOEXT enablement into the topology parser
x86/cpu/amd: Make the NODEID_MSR union actually work
x86/cpu/amd: Make the CPUID 0x80000008 parser correct
x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI
x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto
x86/bugs: Clarify that syscall hardening isn't a BHI mitigation
x86/bugs: Fix BHI handling of RRSBA
x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr'
x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES
x86/bugs: Fix BHI documentation
x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n
x86/topology: Don't update cpu_possible_map in topo_set_cpuids()
x86/bugs: Fix return type of spectre_bhi_state()
x86/apic: Force native_apic_mem_read() to use the MOV instruction
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix the x86 PMU multi-counter code returning invalid data in certain
circumstances"
* tag 'perf-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix out of range data
|
|
Recently the VCHIQ driver which provides a kernel interface to the
BCM2835 VideoCore made a decent progress in staging. But the build
coverage is currently limited to bcm2835_defconfig (ARM 32 bit).
So build the most valueable driver which uses VCHIQ and enable
cinch audio support for Raspberry Pi on arm64.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240414132052.11811-1-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Confusingly, X86_FEATURE_RETPOLINE doesn't mean retpolines are enabled,
as it also includes the original "AMD retpoline" which isn't a retpoline
at all.
Also replace cpu_feature_enabled() with boot_cpu_has() because this is
before alternatives are patched and cpu_feature_enabled()'s fallback
path is slower than plain old boot_cpu_has().
Fixes: ec9404e40e8f ("x86/bhi: Add BHI mitigation knob")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/ad3807424a3953f0323c011a643405619f2a4927.1712944776.git.jpoimboe@kernel.org
|
|
The denylist is blocking the 32 bit version of the call but is allowing
the 64 bit version of it. There is no reason for blocking only one of
them and the hypervisor should support these calls.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240411135700.2140550-1-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Adding new entries to our system register tables is a painful exercise,
as we require them to be ordered by Op0,Op1,CRn,CRm,Op2.
If an entry is misordered, we output an error that indicates the
pointer to the entry and the number *of the last valid one*.
That's not very helpful, and would be much better if we printed the
number of the *offending* entry as well as its name (which is present
in the vast majority of the cases).
This makes debugging new additions to the tables much easier.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240410152503.3593890-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Correct dsa and pcie unit addresses to fix dtc W=1 warnings:
hip06.dtsi:439.23-571.5: Warning (simple_bus_reg): /soc/dsa@c7000000: simple-bus unit address format error, expected "c5000000"
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
Non-MMIO devices, which are BTW not really part of the SoC, should not
be within simple-bus, as reported by dtc W=1 warning:
hip06.dtsi:377.18-381.5: Warning (simple_bus_reg): /soc/refclk: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
Correct local-bus children unit addresses to fix dtc W=1 warnings:
hip05-d02.dts:57.16-76.4: Warning (simple_bus_reg): /soc/local-bus@80380000/nor-flash@0,0: simple-bus unit address format error, expected "0"
hip05-d02.dts:78.11-81.4: Warning (simple_bus_reg): /soc/local-bus@80380000/cpld@1,0: simple-bus unit address format error, expected "100000000"
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
Non-MMIO devices, which are BTW not really part of the SoC, should not
be within simple-bus, as reported by dtc W=1 warning:
hip05.dtsi:301.30-305.5: Warning (simple_bus_reg): /soc/refclk200mhz: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix the TLBI RANGE operand calculation causing live migration under
KVM/arm64 to miss dirty pages due to stale TLB entries"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: tlb: Fix TLBI RANGE operand
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The device tree changes this time are all for NXP i.MX platforms,
addressing issues with clocks and regulators on i.MX7 and i.MX8.
The old OMAP2 based Nokia N8x0 tablet get a couple of code fixes for
regressions that came in.
The ARM SCMI and FF-A firmware interfaces get a couple of minor bug
fixes.
A regression fix for RISC-V cache management addresses a problem with
probe order on Sifive cores"
* tag 'soc-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
MAINTAINERS: Change Krzysztof Kozlowski's email address
arm64: dts: imx8qm-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix adc lpcg indices
arm64: dts: imx8-ss-dma: fix pwm lpcg indices
arm64: dts: imx8-ss-dma: fix spi lpcg indices
arm64: dts: imx8-ss-conn: fix usb lpcg indices
arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
ARM: dts: imx7s-warp: Pass OV2680 link-frequencies
ARM: dts: imx7-mba7: Use 'no-mmc' property
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator
arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator
cache: sifive_ccache: Partially convert to a platform driver
firmware: arm_scmi: Make raw debugfs entries non-seekable
firmware: arm_scmi: Fix wrong fastchannel initialization
firmware: arm_ffa: Fix the partition ID check in ffa_notification_info_get()
ARM: OMAP2+: fix USB regression on Nokia N8x0
mmc: omap: restore original power up/down steps
mmc: omap: fix deferred probe
...
|
|
The ACPI DSDT of the Surface Pro X (SQ2) specifies the interrupts for
the secondary UBS controller as
Name (_CRS, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveHigh, Shared, ,, )
{
0x000000AA,
}
Interrupt (ResourceConsumer, Level, ActiveHigh, SharedAndWake, ,, )
{
0x000000A7, // hs_phy_irq: &intc GIC_SPI 136
}
Interrupt (ResourceConsumer, Level, ActiveHigh, SharedAndWake, ,, )
{
0x00000228, // ss_phy_irq: &pdc 40
}
Interrupt (ResourceConsumer, Edge, ActiveHigh, SharedAndWake, ,, )
{
0x0000020A, // dm_hs_phy_irq: &pdc 10
}
Interrupt (ResourceConsumer, Edge, ActiveHigh, SharedAndWake, ,, )
{
0x0000020B, // dp_hs_phy_irq: &pdc 11
}
})
Generally, the interrupts above 0x200 map to the PDC interrupts (as used
in the devicetree) as ACPI_NUMBER - 0x200. Note that this lines up with
dm_hs_phy_irq and dp_hs_phy_irq (as well as the interrupts for the
primary USB controller).
Based on the snippet above, ss_phy_irq should therefore be PDC 40 (=
0x28) and not PDC 7. The latter is according to ACPI instead used as
ss_phy_irq for port 0 of the multiport USB controller). Fix this by
setting ss_phy_irq to '&pdc 40'.
Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240328022224.336938-1-luzmaximilian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.
But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.
Fixes: a33a532b3b1e ("arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240318-pci-bdf-sid-fix-v1-3-acca6c5d9cf1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.
But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.
Fixes: 114990ce3edf ("arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240318-pci-bdf-sid-fix-v1-2-acca6c5d9cf1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.
But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.
Cc: stable@vger.kernel.org # 6.3: bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly")
Fixes: ff384ab56f16 ("arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240318-pci-bdf-sid-fix-v1-1-acca6c5d9cf1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the missing PCIe CX performance level votes to avoid relying on
other drivers (e.g. USB or UFS) to maintain the nominal performance
level required for Gen3 speeds.
Fixes: 813e83157001 ("arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes")
Cc: stable@vger.kernel.org # 6.2
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240306095651.4551-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The compatible's for the cluster/domain idle states of x1e80100
are wrong, fix it.
Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240317132918.1068817-1-quic_rjendra@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The code in qcom_q6v5_init() requests the "wdog" IRQ as
IRQF_TRIGGER_RISING. If dt defines the interrupt type as LEVEL_HIGH then
the driver will have issues getting the IRQ again after probe deferral
with an error like:
irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000!
Fix that by updating the devicetrees to use IRQ_TYPE_EDGE_RISING for
these interrupts, as is already used in most dt's. Also the driver was
already using the interrupts with that type.
Fixes: 3658e411efcb ("arm64: dts: qcom: sc7280: Add ADSP node")
Fixes: df62402e5ff9 ("arm64: dts: qcom: sc7280: Add CDSP node")
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Fixes: 8eb5287e8a42 ("arm64: dts: qcom: sm6350: Add CDSP nodes")
Fixes: efc33c969f23 ("arm64: dts: qcom: sm6350: Add ADSP nodes")
Fixes: fe6fd26aeddf ("arm64: dts: qcom: sm6375: Add ADSP&CDSP")
Fixes: 23a8903785b9 ("arm64: dts: qcom: sm8250: Add remoteprocs")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240219-remoteproc-irqs-v1-1-c5aeb02334bd@fairphone.com
[bjorn: Added fixes references]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit d96c36004e31 ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig
entry") removed a hidden tab because it apparently showed breakage in
some third-party kernel config parsing tool.
It wasn't clear what tool it was, but let's make sure it gets fixed.
Because if you can't parse tabs as whitespace, you should not be parsing
the kernel Kconfig files.
In fact, let's make such breakage more obvious than some esoteric ftrace
record size option. If you can't parse tabs, you can't have page sizes.
Yes, tab-vs-space confusion is sadly a traditional Unix thing, and
'make' is famous for being broken in this regard. But no, that does not
mean that it's ok.
I'd add more random tabs to our Kconfig files, but I don't want to make
things uglier than necessary. But it *might* bbe necessary if it turns
out we see more of this kind of silly tooling.
Fixes: d96c36004e31 ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry")
Link: https://lore.kernel.org/lkml/CAHk-=wj-hLLN_t_m5OL4dXLaxvXKy_axuoJYXif7iczbfgAevQ@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Fix for syscall_get_nr() to make it work even if tracing is disabled"
* tag 'mips-fixes_6.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: scall: Save thread_info.syscall unconditionally on entry
|
|
During linear map pgtable creation, each pgtable is fixmapped /
fixunmapped twice; once during allocation to zero the memory, and a
again during population to write the entries. This means each table has
2 TLB invalidations issued against it. Let's fix this so that each table
is only fixmapped/fixunmapped once, halving the number of TLBIs, and
improving performance.
Achieve this by separating allocation and initialization (zeroing) of
the page. The allocated page is now fixmapped directly by the walker and
initialized, before being populated and finally fixunmapped.
This approach keeps the change small, but has the side effect that late
allocations (using __get_free_page()) must also go through the generic
memory clearing routine. So let's tell __get_free_page() not to zero the
memory to avoid duplication.
Additionally this approach means that fixmap/fixunmap is still used for
late pgtable modifications. That's not technically needed since the
memory is all mapped in the linear map by that point. That's left as a
possible future optimization if found to be needed.
Execution time of map_mem(), which creates the kernel linear map page
tables, was measured on different machines with different RAM configs:
| Apple M2 VM | Ampere Altra| Ampere Altra| Ampere Altra
| VM, 16G | VM, 64G | VM, 256G | Metal, 512G
---------------|-------------|-------------|-------------|-------------
| ms (%) | ms (%) | ms (%) | ms (%)
---------------|-------------|-------------|-------------|-------------
before | 11 (0%) | 161 (0%) | 656 (0%) | 1654 (0%)
after | 10 (-11%) | 104 (-35%) | 438 (-33%) | 1223 (-26%)
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240412131908.433043-4-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
After removing uneccessary TLBIs, the next bottleneck when creating the
page tables for the linear map is DSB and ISB, which were previously
issued per-pte in __set_pte(). Since we are writing multiple ptes in a
given pte table, we can elide these barriers and insert them once we
have finished writing to the table.
Execution time of map_mem(), which creates the kernel linear map page
tables, was measured on different machines with different RAM configs:
| Apple M2 VM | Ampere Altra| Ampere Altra| Ampere Altra
| VM, 16G | VM, 64G | VM, 256G | Metal, 512G
---------------|-------------|-------------|-------------|-------------
| ms (%) | ms (%) | ms (%) | ms (%)
---------------|-------------|-------------|-------------|-------------
before | 78 (0%) | 435 (0%) | 1723 (0%) | 3779 (0%)
after | 11 (-86%) | 161 (-63%) | 656 (-62%) | 1654 (-56%)
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240412131908.433043-3-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A large part of the kernel boot time is creating the kernel linear map
page tables. When rodata=full, all memory is mapped by pte. And when
there is lots of physical ram, there are lots of pte tables to populate.
The primary cost associated with this is mapping and unmapping the pte
table memory in the fixmap; at unmap time, the TLB entry must be
invalidated and this is expensive.
Previously, each pmd and pte table was fixmapped/fixunmapped for each
cont(pte|pmd) block of mappings (16 entries with 4K granule). This means
we ended up issuing 32 TLBIs per (pmd|pte) table during the population
phase.
Let's fix that, and fixmap/fixunmap each page once per population, for a
saving of 31 TLBIs per (pmd|pte) table. This gives a significant boot
speedup.
Execution time of map_mem(), which creates the kernel linear map page
tables, was measured on different machines with different RAM configs:
| Apple M2 VM | Ampere Altra| Ampere Altra| Ampere Altra
| VM, 16G | VM, 64G | VM, 256G | Metal, 512G
---------------|-------------|-------------|-------------|-------------
| ms (%) | ms (%) | ms (%) | ms (%)
---------------|-------------|-------------|-------------|-------------
before | 168 (0%) | 2198 (0%) | 8644 (0%) | 17447 (0%)
after | 78 (-53%) | 435 (-80%) | 1723 (-80%) | 3779 (-78%)
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240412131908.433043-2-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The irq_desc::kstat_irqs member is a per-CPU variable of type int, which is
only capable of counting. A snapshot mechanism for interrupt statistics
will be added soon, which requires an additional variable to store the
snapshot.
To facilitate expansion, convert kstat_irqs here to a struct containing
only the count.
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240411074134.30922-2-yaoma@linux.alibaba.com
|
|
Add a script which produces a Flat Image Tree (FIT), a single file
containing the built kernel and associated devicetree files.
Compression defaults to gzip which gives a good balance of size and
performance.
The files compress from about 86MB to 24MB using this approach.
The FIT can be used by bootloaders which support it, such as U-Boot
and Linuxboot. It permits automatic selection of the correct
devicetree, matching the compatible string of the running board with
the closest compatible string in the FIT. There is no need for
filenames or other workarounds.
Add a 'make image.fit' build target for arm64, as well.
The FIT can be examined using 'dumpimage -l'.
This uses the 'dtbs-list' file but processes only .dtb files, ignoring
the overlay .dtbo files.
This features requires pylibfdt (use 'pip install libfdt'). It also
requires compression utilities for the algorithm being used. Supported
compression options are the same as the Image.xxx files. Use
FIT_COMPRESSION to select an algorithm other than gzip.
While FIT supports a ramdisk / initrd, no attempt is made to support
this here, since it must be built separately from the Linux build.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240329032836.141899-3-sjg@chromium.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add a new variable containing a list of possible targets. Mark them as
phony. This matches the approach taken for arch/arm
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Link: https://lore.kernel.org/r/20240329032836.141899-2-sjg@chromium.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The USBDP Phy is used by RK3588 to handle the Dual-Role USB3
controllers. The Phy also supports Displayport Alt-Mode, but
the necessary DRM driver has not yet been merged.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240408225109.128953-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable full support (XHCI, EHCI, OHCI) for the lower USB3 port from
Radxa Rock 5 Model B. The upper one is already supported.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240408225109.128953-11-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable full support (XHCI, EHCI, OHCI) for the upper USB3 port from
Radxa Rock 5 Model A. The lower one is already supported.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240408225109.128953-10-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add support for the board's USB3 connectors. It has 1x USB Type-A
and 1x USB Type-C.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240408225109.128953-9-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add both USB3 dual-role controllers to the RK3588 devicetree.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240408225109.128953-8-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add both USB3-DisplayPort PHYs to RK3588 SoC DT.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240408225109.128953-7-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Reorder common DT properties alphabetically for usb2phy, according
to latest DT style rules.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240408225109.128953-6-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
usb2-phy should be named usb2phy according to the DT binding,
so let's fix it up accordingly.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240408225109.128953-5-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Amlogic A5 is an application processor designed for smart audio
and IoT applications.
Add basic support for the A5 based Amlogic AV400 board, which describes
the following components: CPU, GIC, IRQ, Timer and UART.
These are capable of booting up into the serial console.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240401-basic_dt-v3-5-cb29ae1c16da@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Amlogic A4 is an application processor designed for smart audio
and IoT applications.
Add basic support for the A4 based Amlogic BA400 board, which describes
the following components: CPU, GIC, IRQ, Timer and UART.
These are capable of booting up into the serial console.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240401-basic_dt-v3-4-cb29ae1c16da@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The power-controller module works well by adding its parent
node secure-monitor.
Fixes: 085f7a298a14 ("arm64: dts: add support for S4 power domain controller")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240412-fix-secpwr-s4-v2-1-3802fd936d77@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
