| Age | Commit message (Collapse) | Author |
|
The GPU clock was reduced on iMX8MM SOC device tree to prevent boards
that don't support GPU overdrive from being out of specification. However,
this caused a regression in GPU speed for the Verdin iMX8MM, which does
support GPU overdrive. This patch fixes this by enabling overdrive mode
in the SOM dtsi.
Fixes: 1f794d3eed53 ("arm64: dts: imx8mm: Reduce GPU to nominal speed")
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the DT node for the GPU core found on the i.MX8QM.
etnaviv-gpu 53100000.gpu: model: GC7000, revision: 6009
[drm] Initialized etnaviv 1.4.0 20151214 for etnaviv on minor 0
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove extended_cede_processor() and its helpers as
extended_cede_processor() has no callers since
commit 48f6e7f6d948("powerpc/pseries: remove cede offline state for CPUs")
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240514132457.292865-1-gautam@linux.ibm.com
|
|
CONFIG_ARM64 selects CONFIG_EDAC_SUPPORT already.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add fec2 support.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
add ocotp ad fec_mac[0,1] for imx8qm.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add lsio mu5 and mu6.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add flexcan[1,2,3] support for imx8qm-mek board.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add cm41_i2c and devices under it for imx8qm-mek board.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add i2c0 and all devices under it for imx8qm-mek board.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add cm41 subsystem dtsi for iMX8X chips.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add sai[0,1,6,7], wm8960 and asrc0 support.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add i.MX8QM audio related nodes and update eDMA[0,1]'s information.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Different boards have different DDR memory sizes and layouts for reserved
memory. This change reduces future dependencies to add 'imx8qm-ss-audio'.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add audio nodes for imx8dxl-evk boards.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The power domains of i.MX8DXL's acm is difference i.MX8QXP. IRQ number of
sai[0..3] and spdif0 are also difference.
Update power domains information for i.MX8DXL.
Update sai[0..3] and spdif0's IRQ number for i.MX8DXL.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Delete unused node in adma subsystem.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader adds MTD partitions in this subnode if present, or in the
spi-nor node itself otherwise.
Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml.
Fix all this by adding an empty partitions node which the bootloader will
fill with configured MTD partitions. Remove the deprecated properties
as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader adds MTD partitions in this subnode if present, or in the
spi-nor node itself otherwise.
Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml.
Fix all this by adding an empty partitions node which the bootloader will
fill with configured MTD partitions. Remove the deprecated properties
as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader adds MTD partitions in this subnode if present, or in the
spi-nor node itself otherwise.
Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml.
Fix all this by adding an empty partitions node which the bootloader will
fill with configured MTD partitions. Remove the deprecated properties
as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader adds MTD partitions in this subnode if present, or in the
spi-nor node itself otherwise.
Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml.
Fix all this by adding an empty partitions node which the bootloader will
fill with configured MTD partitions. Remove the deprecated properties
as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader adds MTD partitions in this subnode if present, or in the
spi-nor node itself otherwise.
Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml.
Fix all this by adding an empty partitions node which the bootloader will
fill with configured MTD partitions. Remove the deprecated properties
as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader adds MTD partitions in this subnode if present, or in the
spi-nor node itself otherwise. Direct children cause warnings like:
425e0000.spi: ofpart partition /soc@0/bus@42000000/spi@425e0000/flash@0/
partition@600000 (/soc@0/bus@42000000/spi@425e0000/flash@0) #size-cells
is wrongly set to <0>, assuming <1> for parsing partitions.
This is due flexspi node having #size-cells = <0>. Setting #size-cells in
MTD nodes itself is deprecated by mtd.yaml.
Fix all this by adding an empty partitions node which the bootloader will
fill with configured MTD partitions.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This adds support for both USB host and USB Type-C ports. This includes
the on-board USB hub. Remove the gpio-hog for USB_RESET# as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This adds support for both USB host and USB Type-C ports. This includes
the on-board USB hub.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The DSI to HDMI bridge supports hot-plut-detect, but the
driver didn't previously support a shared IRQ GPIO. With
the driver updated, the interrupt can be added to the bridge.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Miscellaneous topology parsing fixes:
- Fix topology parsing regression on older CPUs in the new AMD/Hygon
parser
- Fix boot crash on odd Intel Quark and similar CPUs that do not fill
out cpuinfo_x86::x86_clflush_size and zero out
cpuinfo_x86::x86_cache_alignment as a result.
Provide 32 bytes as a general fallback value.
- Fix topology enumeration on certain rare CPUs where the BIOS locks
certain CPUID leaves and the kernel unlocked them late, which broke
with the new topology parsing code. Factor out this unlocking logic
and move it earlier in the parsing sequence"
* tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology/intel: Unlock CPUID before evaluating anything
x86/cpu: Provide default cache line size if not enumerated
x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Export a symbol to make life easier for instrumentation/debugging"
* tag 'sched-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/x86: Export 'percpu arch_freq_scale'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fix from Ingo Molnar:
"Add missing MODULE_DESCRIPTION() lines"
* tag 'perf-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add missing MODULE_DESCRIPTION() lines
perf/x86/rapl: Add missing MODULE_DESCRIPTION() line
|
|
make W=1 C=1 warns:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/kernel/cpu/mce/mce-inject.o
Add the missing MODULE_DESCRIPTION().
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240530-md-x86-mce-inject-v1-1-2a9dc998f709@quicinc.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Enforce full ordering for ATOMIC operations with BPF_FETCH
- Fix uaccess build errors seen with GCC 13/14
- Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT
- Drop error message from lparcfg guest name lookup
Thanks to Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao,
Puranjay Mohan, and Samuel Holland.
* tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64
powerpc/uaccess: Use YZ asm constraint for ld
powerpc/uaccess: Fix build errors seen with GCC 13/14
powerpc/pseries/lparcfg: drop error message from guest name lookup
powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH
|
|
Device nodes should have generic names. Use 'clock-controller@' as a GCC
node name instead of a non-generic 'gcc@'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-14-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Device nodes should have generic names. Use 'clock-controller@' as a GCC
node name instead of a non-generic 'gcc@'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-13-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On IPQ9574 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-12-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On IPQ5332 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-11-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On IPQ5018 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-10-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The commit 65931e59e039 ("arm64: dts: qcom: sm8650: move USB graph to
the SoC dtsi") and commit fbb22a182267 ("arm64: dts: qcom: sm8650: move
PHY's orientation-switch to SoC dtsi") have moved some of the properties
from the board DT files to the sm8650.dtsi. As the patch for sm8650 HDK
predates those commits, it still had those properties inside.
Drop these duplicate proerties from the sm8650-hdk.dts.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240530-sm8650-hdk-redundant-v1-1-c39c2ae65f3b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Configure the Type-C and VBUS regulator on PM7250B and wire it up to the
USB PHY, so that USB role and orientation switching works.
For now USB Power Delivery properties are skipped / disabled, so that
the (presumably) bootloader-configured charger doesn't get messed with
and we can charge the phone with at least some amount of power.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240530-fp4-tcpm-v3-3-612d4bbd5e09@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Type-C port management functionality lives inside of the PMIC block on
pm7250b.
The Type-C port management logic controls orientation detection,
vbus/vconn sense and to send/receive Type-C Power Domain messages.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240530-fp4-tcpm-v3-2-612d4bbd5e09@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the required DTS node for the USB VBUS output regulator, which is
available on PM7250B. This will provide the VBUS source to connected
peripherals.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240530-fp4-tcpm-v3-1-612d4bbd5e09@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On both the CRD and QCP, on PCIe 6a sits the NVMe. Add the 3.3V
gpio-controlled regulator and the clkreq, perst and wake gpios as
resources for the PCIe 6a.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-pcie6a-v1-3-ee17a9939ba5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The actual PHY regulator is L1d instead of L3j, so fix it accordingly.
Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-pcie6a-v1-2-ee17a9939ba5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The actual PHY regulator is L1d instead of L3j, so fix it accordingly.
Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-pcie6a-v1-1-ee17a9939ba5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J.
Also add the missing supplies to QMP PHYs.
Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-fix-usb-phy-supplies-v1-2-6eb72a546227@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On MDM9615 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-9-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On IPQ8064 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-8-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On IPQ4019 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-7-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On MSM8960 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-6-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On MSM8660 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-5-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On APQ8064 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-4-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|