| Age | Commit message (Collapse) | Author |
|---|
|
Apple's A7-A11 SoC is now supported, so the original help text is no longer
accurate.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add DTS files for the A11 SoC and the following devices based on it:
- iPhone 8
- iPhone 8 Plus
- iPhone X
On A11, Apple has introduced independent performance and efficiency core
clusters, so indicate it in the device tree as well.
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP and m1n1 support, disabled SMC pinctrl]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add DTS files for the A10X SoC and the following devices based on it:
- Apple TV 4K
- iPad Pro (2nd Generation) (10.5 Inch)
- iPad Pro (2nd Generation) (12.9 Inch)
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP, m1n1 and Apple TV 4K support, uart interrupt and pinctrl fixes]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add DTS files for the A10 SoC and the following devices based on it:
- iPhone 7
- iPhone 7 Plus
- iPod touch 7
- iPad 6
- iPad 7
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP, m1n1 and AOP pinctrl support]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add the device tree for the A9X SoC and the devices based on it:
- iPad Pro (9.7 Inch)
- iPad Pro (12.9 Inch) (1st generation)
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP and m1n1 support, uart interrupt and pinctrl fixes]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add DTS files for the A9 SoC and the following devices based on it:
- iPhone 6s
- iPhone 6s Plus
- iPhone SE (2016)
- iPad 5
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP, m1n1 and AOP pinctrl support]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add DTS files for the A8X SoC and the only device based on it, the iPad
Air 2.
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Markuss: System memory bits]
Co-developed-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
[Nick: SMP, m1n1 and gpio-keys support, pinctrl fixes]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add DTS files for the A8 SoC and the following devices based on it:
- iPhone 6
- iPhone 6 Plus
- iPad mini 4
- iPod touch 6
- Apple TV HD
The remaining HomePod is not supported as part of this patch.
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Ivalyo: system memory bits, iPhone 6 gpio-keys, pinctrl]
Co-developed-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
[Nick: SMP and m1n1 support, gpio-keys additions]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Add DTS files for the A7 SoC and the following devices based on it:
- iPhone 5s
- iPad Air (1)
- iPad mini 2
- iPad mini 3
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP and m1n1 support, gpio-keys additions]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the s390/crypto code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/ipl code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/nospec-sysfs code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/perf_event code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/smp code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/time code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/topology code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
s390 sets "elfcorehdr_addr = ELFCORE_ADDR_MAX;" early during
setup_arch() to deactivate the "elfcorehdr= kernel" parameter,
resulting in is_kdump_kernel() returning "false".
During vmcore_init()->elfcorehdr_alloc(), if on a dump kernel and
allocation succeeded, elfcorehdr_addr will be set to a valid address
and is_kdump_kernel() will consequently return "true".
is_kdump_kernel() should return a consistent result during all boot
stages, and properly return "true" if in a kdump environment - just
like it is done on powerpc where "false" is indicated in fadump
environments, as added in commit b098f1c32365 ("powerpc/fadump: make
is_kdump_kernel() return false when fadump is active").
Similarly provide a custom is_kdump_kernel() implementation that will only
return "true" in kdump environments, and will do so consistently during
boot.
Update the documentation of dump_available().
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Link: https://lore.kernel.org/r/20241023090651.1115507-1-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
kernel_page_present() was intentionally not implemented when adding
ARCH_HAS_SET_DIRECT_MAP support, since it was only used for suspend/resume
which is not supported anymore on s390.
A new bpf use case led to a compile error specific to s390. Even though
this specific use case went away implement kernel_page_present(), so that
the API is complete and potential future users won't run into this problem.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/all/045de961-ac69-40cc-b141-ab70ec9377ec@iogearbox.net
Fixes: 0490d6d7ba0a ("s390/mm: enable ARCH_HAS_SET_DIRECT_MAP")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Run codespell on arch/s390 and drivers/s390 and fix all typos.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This fix is part of a series on for-next, but it fixes broken builds so
I'm picking it up as a fix.
* commit 'bf40167d54d5':
riscv: vdso: Prevent the compiler from inserting calls to memset()
|
|
The macro GET_RM defined twice in this file, one can be removed.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Fixes: 956d705dd279 ("riscv: Unaligned load/store handling for M_MODE")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241008094141.549248-3-zhangchunyan@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The macro is not used in the current version of kernel, it looks like
can be removed to avoid a build warning:
../arch/riscv/kernel/asm-offsets.c: At top level:
../arch/riscv/kernel/asm-offsets.c:7: warning: macro "GENERATING_ASM_OFFSETS" is not used [-Wunused-macros]
7 | #define GENERATING_ASM_OFFSETS
Fixes: 9639a44394b9 ("RISC-V: Provide a cleaner raw_smp_processor_id()")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Link: https://lore.kernel.org/r/20241008094141.549248-2-zhangchunyan@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
'cpu' is an unsigned integer, so its conversion specifier should
be %u, not %d.
Suggested-by: Wentao Guan <guanwentao@uniontech.com>
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/all/alpine.DEB.2.21.2409122309090.40372@angie.orcam.me.uk/
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: f1e58583b9c7 ("RISC-V: Support cpu hotplug")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/4C127DEECDA287C8+20241017032010.96772-1-wangyuli@uniontech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When populating cache leaves we previously fetched the CPU device node
at the very beginning. But when ACPI is enabled we go through a
specific branch which returns early and does not call 'of_node_put' for
the node that was acquired.
Since we are not using a CPU device node for the ACPI code anyways, we
can simply move the initialization of it just passed the ACPI block, and
we are guaranteed to have an 'of_node_put' call for the acquired node.
This prevents a bad reference count of the CPU device node.
Moreover, the previous function did not check for errors when acquiring
the device node, so a return -ENOENT has been added for that case.
Signed-off-by: Miquel Sabaté Solà <mikisabate@gmail.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: 604f32ea6909 ("riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240913080053.36636-1-mikisabate@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The IMAGE_DLLCHARACTERISTICS_NX_COMPAT informs the firmware that the
EFI binary does not rely on pages that are both executable and
writable.
The flag is used by some distro versions of GRUB to decide if the EFI
binary may be executed.
As the Linux kernel neither has RWX sections nor needs RWX pages for
relocation we should set the flag.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Fixes: cb7d2dd5612a ("RISC-V: Add PE/COFF header for EFI stub")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240929140233.211800-1-heinrich.schuchardt@canonical.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
During the discussion before supporting rust on riscv, it was decided
not to support gcc yet, due to differences in extension handling
compared to llvm (only the version of libclang matching the c compiler
is supported). Recently Jason Montleon reported [1] that building with
gcc caused build issues, due to unsupported arguments being passed to
libclang. After some discussion between myself and Miguel, it is better
to disable gcc + rust builds to match the original intent, and
subsequently support it when an appropriate set of extensions can be
deduced from the version of libclang.
Closes: https://lore.kernel.org/all/20240917000848.720765-2-jmontleo@redhat.com/ [1]
Link: https://lore.kernel.org/all/20240926-battering-revolt-6c6a7827413e@spud/ [2]
Fixes: 70a57b247251a ("RISC-V: enable building 64-bit kernels with rust support")
Cc: stable@vger.kernel.org
Reported-by: Jason Montleon <jmontleo@redhat.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20241001-playlist-deceiving-16ece2f440f5@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Early code designates the code executed when the MMU is not yet enabled,
and this comes with some limitations (see
Documentation/arch/riscv/boot.rst, section "Pre-MMU execution").
FORTIFY_SOURCE must be disabled then since it can trigger kernel panics
as reported in [1].
Reported-by: Jason Montleon <jmontleo@redhat.com>
Closes: https://lore.kernel.org/linux-riscv/CAJD_bPJes4QhmXY5f63GHV9B9HFkSCoaZjk-qCT2NGS7Q9HODg@mail.gmail.com/ [1]
Fixes: a35707c3d850 ("riscv: add memory-type errata for T-Head")
Fixes: 26e7aacb83df ("riscv: Allow to downgrade paging mode from the command line")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20241009072749.45006-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When SVPBMT is enabled, __acpi_map_table() will directly access the
data in DDR through the IO attribute, rather than through hardware
cache consistency, resulting in incorrect data in the obtained ACPI
table.
The log: ACPI: [ACPI:0x18] Invalid zero length.
We do not assume whether the bootloader flushes or not. We should
access in a cacheable way instead of maintaining cache consistency
by software.
Fixes: 3b426d4b5b14 ("RISC-V: ACPI : Fix for usage of pointers in different address space")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20241014130141.86426-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
snps,dw-apb-gpio-port devices
snps,dw-apb-gpio-port is deprecated since commit ef42a8da3cf3
("dt-bindings: gpio: dwapb: Add ngpios property support"). The
respective driver supports this since commit 7569486d79ae ("gpio: dwapb:
Add ngpios DT-property support") which is included in Linux v5.10-rc1.
This change was created using
git grep -l snps,nr-gpios arch/riscv/boot/dts | xargs perl -p -i -e 's/\bsnps,nr-gpios\b/ngpios/
.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Fixes: a508d794f86e ("riscv: sophgo: dts: add gpio controllers for SG2042 SoC")
Link: https://lore.kernel.org/r/20241022091428.477697-8-u.kleine-koenig@baylibre.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Since we have a helper now, let's switch to using it. It will make
the code slightly more consistent.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241024142828.2612828-5-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The write_sigio thread is not really a traditional thread. Set
the parent-death signal for it to ensure that it will be killed
if the UML kernel dies unexpectedly without proper cleanup.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241024142828.2612828-4-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ubd io thread is not really a traditional thread. Set the
parent-death signal for it to ensure that it will be killed if
the UML kernel dies unexpectedly without proper cleanup.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241024142828.2612828-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This helper can be used to set the parent-death signal of the calling
process to SIGKILL to ensure that the process will be killed if the
UML kernel dies unexpectedly without proper cleanup. This helper will
be used in the follow-up patches.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241024142828.2612828-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add i2c2's i2c-scl-internal-delay-ns.
Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com>
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://lore.kernel.org/r/20241025-i2c-delay-v2-4-9be1bcaf35e0@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add i2c2's i2c-scl-internal-delay-ns.
Fixes: 52e84f233459 ("arm64: dts: mt8183: Add kukui-jacuzzi-cozmo board")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com>
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://lore.kernel.org/r/20241025-i2c-delay-v2-3-9be1bcaf35e0@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add i2c2's i2c-scl-internal-delay-ns.
Fixes: dd6e3b06214f ("arm64: dts: mt8183: Add kukui-jacuzzi-burnet board")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com>
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://lore.kernel.org/r/20241025-i2c-delay-v2-2-9be1bcaf35e0@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add i2c2's i2c-scl-internal-delay-ns.
Fixes: 6cd7fdc8c530 ("arm64: dts: mt8183: Add kukui-jacuzzi-fennel board")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com>
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by:
Link: https://lore.kernel.org/r/20241025-i2c-delay-v2-1-9be1bcaf35e0@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add OPP table for RZ/V2H(P) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241008164935.335043-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts and no adjacent changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implements a slightly modified rk3588s-orangepi-5b.dts from the vendor.
Unfortunately the &wireless_bluetooth and &wireless_wlan are not
implemented yet.
Therefore add the sdhci alias to be mmc0 on the rk3588s-orangepi-5b.dts.
How is the Orange Pi 5B unique?
- the Orange Pi 5b uses combphy0_ps for the WiFi.
- the Orange Pi 5B has GPIO0_C5 hooked to BT_WAKE_HOST.
- builtin eMMC storage
- ap6275p Wifi module (like the Orange Pi 5 Plus)
- builtin BlueTooth module
Signed-off-by: Cenk Uluisik <cenk.uluisik@googlemail.com>
Link: https://lore.kernel.org/r/20241024095038.42079-3-cenk.uluisik@googlemail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Unique to the Orange Pi 5 board:
- M.2 NVMe M-Key PCIe 2.0x1 on combphy0_ps
- SPI NOR flash
Co-Developed-by: Jimmy Hon <honyuenkwun@gmail.com>
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Signed-off-by: Cenk Uluisik <cenk.uluisik@googlemail.com>
Link: https://lore.kernel.org/r/20241024095038.42079-1-cenk.uluisik@googlemail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Paragraph "3.4 Power up Timing Sequence" of the AzureWave-CM256SM
datasheet mentions the following about the BT_REG_ON pin, which is
connected to GPIO0_C4_d:
When this pin is low and WL_REG_ON is high,
the BT section is in reset.
Therefor set that pin to GPIO_ACTIVE_HIGH so that it can be pulled low
for a reset.
If set to GPIO_ACTIVE_LOW, the following errors are observed:
Bluetooth: hci0: command 0x0c03 tx timeout
Bluetooth: hci0: BCM: Reset failed (-110)
So fix the GPIO polarity by setting it to ACTIVE_HIGH.
This also matches what other devices with the same BT device have.
Fixes: 2b6a3f857550 ("arm64: dts: rockchip: Fix reset-gpios property on brcm BT nodes")
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20241018145053.11928-2-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The binding for Everest ES8328/ES8388 audio CODEC doesn't support the
'clock-names' property:
rk3588-orangepi-5-plus.dtb: audio-codec@11: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/sound/everest,es8328.yaml#
Since the related audio driver is also not making use of it, drop the
invalid property from all es8388 codec nodes.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20241019-es8328-dt-fixes-v1-1-ca77d5ce21ad@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Both the node name as well as the compatible were not named
according to the binding expectations, fix that.
Fixes: 47bf3a5c9e2a ("ARM: dts: rockchip: add the sound setup for rk3036-kylin board")
Cc: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-15-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Compatible and clock names did not match the existing binding.
So set the correct values and re-order+rename the clocks.
It looks like no rk3036 board did use the spi controller so far,
so this was never detected on a running device yet.
Fixes: f629fcfab2cd ("ARM: dts: rockchip: support the spi for rk3036")
Cc: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-14-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Neither the binding nor the driver implementation specify/use the grf
reference provided in the rk3036. And neither does the newer rk3128
user of the hdmi controller. So drop the rockchip,grf property.
Fixes: b7217cf19c63 ("ARM: dts: rockchip: add hdmi device node for rk3036")
Cc: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-13-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The acodec node is not conformant to the binding.
Set the correct nodename, use the correct compatible, add the needed
#sound-dai-cells and sort the rockchip,grf below clocks properties
as expected.
Fixes: faea098e1808 ("ARM: dts: rockchip: add core rk3036 dtsi")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-12-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The patch adding display support for the pinephone pro introduced two
regulators that contain pinctrl-names props but no pinctrl-assignments.
Looks like someone forgot the pinctrl settings, so remove the orphans
for now, until that changes.
Fixes: 3e987e1f22b9 ("arm64: dts: rockchip: Add internal display support to rk3399-pinephone-pro")
Cc: Martijn Braam <martijn@brixit.nl>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-11-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The 'enable-active-low' property is not a valid, because it is the
default behaviour of the fixed regulator.
Only 'enable-active-high' is valid, and when this property is absent
the fixed regulator will act as active low by default.
Both the rk3588-orange-pi-5 and the Wolfvision pf5 io expander overlay
smuggled those enable-active-low properties in, so remove them to
make dtbscheck happier.
Fixes: 28799a7734a0 ("arm64: dts: rockchip: add wolfvision pf5 io expander board")
Cc: Michael Riesch <michael.riesch@wolfvision.net>
Fixes: b6bc755d806e ("arm64: dts: rockchip: Add Orange Pi 5")
Cc: Muhammed Efe Cetin <efectn@6tel.net>
Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-10-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The jaguar has an hdmi output port, which is connected
to the hdmi0 controller of the rk3588.
Add the necessary plumbing to enable it using the recently merged
hdmi-qp controller.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20241024151403.1748554-4-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
