| Age | Commit message (Collapse) | Author |
|---|
|
Replace Book3s Radix's homebrewed (read: copy+pasted) fault-in logic with
__kvm_faultin_pfn(), which functionally does pretty much the exact same
thing.
Note, when the code was written, KVM indeed didn't do fast GUP without
"!atomic && !async", but that has long since changed (KVM tries fast GUP
for all writable mappings).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-62-seanjc@google.com>
|
|
Replace Book3s HV's homebrewed fault-in logic with __kvm_faultin_pfn(),
which functionally does pretty much the exact same thing.
Note, when the code was written, KVM indeed didn't do fast GUP without
"!atomic && !async", but that has long since changed (KVM tries fast GUP
for all writable mappings).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-61-seanjc@google.com>
|
|
Convert RISC-V to __kvm_faultin_pfn()+kvm_release_faultin_page(), which
are new APIs to consolidate arch code and provide consistent behavior
across all KVM architectures.
Opportunisticaly fix a s/priort/prior typo in the related comment.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-60-seanjc@google.com>
|
|
Mark pages accessed before dropping mmu_lock when faulting in guest memory
so that RISC-V can convert to kvm_release_faultin_page() without tripping
its lockdep assertion on mmu_lock being held. Marking pages accessed
outside of mmu_lock is ok (not great, but safe), but marking pages _dirty_
outside of mmu_lock can make filesystems unhappy (see the link below).
Do both under mmu_lock to minimize the chances of doing the wrong thing in
the future.
Link: https://lore.kernel.org/all/cover.1683044162.git.lstoakes@gmail.com
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-59-seanjc@google.com>
|
|
Don't mark pages dirty if KVM bails from the page fault handler without
installing a stage-2 mapping, i.e. if the page is guaranteed to not be
written by the guest.
In addition to being a (very) minor fix, this paves the way for converting
RISC-V to use kvm_release_faultin_page().
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-58-seanjc@google.com>
|
|
Convert arm64 to use __kvm_faultin_pfn()+kvm_release_faultin_page().
Three down, six to go.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-57-seanjc@google.com>
|
|
Mark pages/folios accessed+dirty prior to dropping mmu_lock, as marking a
page/folio dirty after it has been written back can make some filesystems
unhappy (backing KVM guests will such filesystem files is uncommon, and
the race is minuscule, hence the lack of complaints).
While scary sounding, practically speaking the worst case scenario is that
KVM would trigger this WARN in filemap_unaccount_folio():
/*
* At this point folio must be either written or cleaned by
* truncate. Dirty folio here signals a bug and loss of
* unwritten data - on ordinary filesystems.
*
* But it's harmless on in-memory filesystems like tmpfs; and can
* occur when a driver which did get_user_pages() sets page dirty
* before putting it, while the inode is being finally evicted.
*
* Below fixes dirty accounting after removing the folio entirely
* but leaves the dirty flag set: it has no effect for truncated
* folio and anyway will be cleared before returning folio to
* buddy allocator.
*/
if (WARN_ON_ONCE(folio_test_dirty(folio) &&
mapping_can_writeback(mapping)))
folio_account_cleaned(folio, inode_to_wb(mapping->host));
KVM won't actually write memory because the stage-2 mappings are protected
by the mmu_notifier, i.e. there is no risk of loss of data, even if the
VM were backed by memory that needs writeback.
See the link below for additional details.
This will also allow converting arm64 to kvm_release_faultin_page(), which
requires that mmu_lock be held (for the aforementioned reason).
Link: https://lore.kernel.org/all/cover.1683044162.git.lstoakes@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-56-seanjc@google.com>
|
|
Convert PPC e500 to use __kvm_faultin_pfn()+kvm_release_faultin_page(),
and continue the inexorable march towards the demise of
kvm_pfn_to_refcounted_page().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-55-seanjc@google.com>
|
|
Mark pages accessed before dropping mmu_lock when faulting in guest memory
so that shadow_map() can convert to kvm_release_faultin_page() without
tripping its lockdep assertion on mmu_lock being held. Marking pages
accessed outside of mmu_lock is ok (not great, but safe), but marking
pages _dirty_ outside of mmu_lock can make filesystems unhappy.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-54-seanjc@google.com>
|
|
Mark the underlying page as dirty in kvmppc_e500_ref_setup()'s sole
caller, kvmppc_e500_shadow_map(), which will allow converting e500 to
__kvm_faultin_pfn() + kvm_release_faultin_page() without having to do
a weird dance between ref_setup() and shadow_map().
Opportunistically drop the redundant kvm_set_pfn_accessed(), as
shadow_map() puts the page via kvm_release_pfn_clean().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-53-seanjc@google.com>
|
|
Use __kvm_faultin_page() get the APIC access page so that KVM can
precisely release the refcounted page, i.e. to remove yet another user
of kvm_pfn_to_refcounted_page(). While the path isn't handling a guest
page fault, the semantics are effectively the same; KVM just happens to
be mapping the pfn into a VMCS field instead of a secondary MMU.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-52-seanjc@google.com>
|
|
Hold mmu_lock across kvm_release_pfn_clean() when refreshing the APIC
access page address to ensure that KVM doesn't mark a page/folio as
accessed after it has been unmapped. Practically speaking marking a folio
accesses is benign in this scenario, as KVM does hold a reference (it's
really just marking folios dirty that is problematic), but there's no
reason not to be paranoid (moving the APIC access page isn't a hot path),
and no reason to be different from other mmu_notifier-protected flows in
KVM.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-51-seanjc@google.com>
|
|
Move KVM x86's helper that "finishes" the faultin process to common KVM
so that the logic can be shared across all architectures. Note, not all
architectures implement a fast page fault path, but the gist of the
comment applies to all architectures.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-50-seanjc@google.com>
|
|
When finishing guest page faults, don't mark pages as accessed if KVM
is resuming the guest _without_ installing a mapping, i.e. if the page
isn't being used. While it's possible that marking the page accessed
could avoid minor thrashing due to reclaiming a page that the guest is
about to access, it's far more likely that the gfn=>pfn mapping was
was invalidated, e.g. due a memslot change, or because the corresponding
VMA is being modified.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-49-seanjc@google.com>
|
|
Now that all x86 page fault paths precisely track refcounted pages, use
Use kvm_page_fault.refcounted_page to put references to struct page memory
when finishing page faults. This is a baby step towards eliminating
kvm_pfn_to_refcounted_page().
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-48-seanjc@google.com>
|
|
Provide the "struct page" associated with a guest_memfd pfn as an output
from __kvm_gmem_get_pfn() so that KVM guest page fault handlers can
directly put the page instead of having to rely on
kvm_pfn_to_refcounted_page().
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-47-seanjc@google.com>
|
|
Convert KVM x86 to use the recently introduced __kvm_faultin_pfn().
Opportunstically capture the refcounted_page grabbed by KVM for use in
future changes.
No functional change intended.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-45-seanjc@google.com>
|
|
Move the marking of folios dirty from make_spte() out to its callers,
which have access to the _struct page_, not just the underlying pfn.
Once all architectures follow suit, this will allow removing KVM's ugly
hack where KVM elevates the refcount of VM_MIXEDMAP pfns that happen to
be struct page memory.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-42-seanjc@google.com>
|
|
Add a helper to finish/complete the handling of a guest page, e.g. to
mark the pages accessed and put any held references. In the near
future, this will allow improving the logic without having to copy+paste
changes into all page fault paths. And in the less near future, will
allow sharing the "finish" API across all architectures.
No functional change intended.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-41-seanjc@google.com>
|
|
Deduplicate the prefetching code for indirect and direct MMUs. The core
logic is the same, the only difference is that indirect MMUs need to
prefetch SPTEs one-at-a-time, as contiguous guest virtual addresses aren't
guaranteed to yield contiguous guest physical addresses.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-40-seanjc@google.com>
|
|
Use kvm_release_page_clean() to put prefeteched pages instead of calling
put_page() directly. This will allow de-duplicating the prefetch code
between indirect and direct MMUs.
Note, there's a small functional change as kvm_release_page_clean() marks
the page/folio as accessed. While it's not strictly guaranteed that the
guest will access the page, KVM won't intercept guest accesses, i.e. won't
mark the page accessed if it _is_ accessed by the guest (unless A/D bits
are disabled, but running without A/D bits is effectively limited to
pre-HSW Intel CPUs).
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-39-seanjc@google.com>
|
|
Prefix x86's faultin_pfn helpers with "mmu" so that the mmu-less names can
be used by common KVM for similar APIs.
No functional change intended.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-38-seanjc@google.com>
|
|
Drop the gfn_to_page() lookup when installing KVM's internal memslot for
the APIC access page, as KVM doesn't need to immediately fault-in the page
now that the page isn't pinned. In the extremely unlikely event the
kernel can't allocate a 4KiB page, KVM can just as easily return -EFAULT
on the future page fault.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-37-seanjc@google.com>
|
|
Now that all kvm_vcpu_{,un}map() users pass "true" for @dirty, have them
pass "true" as a @writable param to kvm_vcpu_map(), and thus create a
read-only mapping when possible.
Note, creating read-only mappings can be theoretically slower, as they
don't play nice with fast GUP due to the need to break CoW before mapping
the underlying PFN. But practically speaking, creating a mapping isn't
a super hot path, and getting a writable mapping for reading is weird and
confusing.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-34-seanjc@google.com>
|
|
Mark the APIC access page as dirty when unmapping it from KVM. The fact
that the page _shouldn't_ be written doesn't guarantee the page _won't_ be
written. And while the contents are likely irrelevant, the values _are_
visible to the guest, i.e. dropping writes would be visible to the guest
(though obviously highly unlikely to be problematic in practice).
Marking the map dirty will allow specifying the write vs. read-only when
*mapping* the memory, which in turn will allow creating read-only maps.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-33-seanjc@google.com>
|
|
Add a helper to dedup unmapping the vmcs12 pages. This will reduce the
amount of churn when a future patch refactors the kvm_vcpu_unmap() API.
No functional change intended.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-26-seanjc@google.com>
|
|
Remove vcpu_vmx.msr_bitmap_map and instead use an on-stack structure in
the one function that uses the map, nested_vmx_prepare_msr_bitmap().
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-25-seanjc@google.com>
|
|
Remove the explicit evmptr12 validity check when deciding whether or not
to unmap the eVMCS pointer, and instead rely on kvm_vcpu_unmap() to play
nice with a NULL map->hva, i.e. to do nothing if the map is invalid.
Note, vmx->nested.hv_evmcs_map is zero-allocated along with the rest of
vcpu_vmx, i.e. the map starts out invalid/NULL.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-24-seanjc@google.com>
|
|
Drop @hva from __gfn_to_pfn_memslot() now that all callers pass NULL.
No functional change intended.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-19-seanjc@google.com>
|
|
Remove kvm_page_fault.hva as it is never read, only written. This will
allow removing the @hva param from __gfn_to_pfn_memslot().
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-18-seanjc@google.com>
|
|
Add a pfn error code to communicate that hva_to_pfn() failed because I/O
was needed and disallowed, and convert @async to a constant @no_wait
boolean. This will allow eliminating the @no_wait param by having callers
pass in FOLL_NOWAIT along with other FOLL_* flags.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Stevens <stevensd@chromium.org>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-17-seanjc@google.com>
|
|
Drop @atomic from the myriad "to_pfn" APIs now that all callers pass
"false", and remove a comment blurb about KVM running only the "GUP fast"
part in atomic context.
No functional change intended.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-13-seanjc@google.com>
|
|
Rename gfn_to_page_many_atomic() to kvm_prefetch_pages() to try and
communicate its true purpose, as the "atomic" aspect is essentially a
side effect of the fact that x86 uses the API while holding mmu_lock.
E.g. even if mmu_lock weren't held, KVM wouldn't want to fault-in pages,
as the goal is to opportunistically grab surrounding pages that have
already been accessed and/or dirtied by the host, and to do so quickly.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-12-seanjc@google.com>
|
|
Use gfn_to_page_many_atomic() instead of gfn_to_pfn_memslot_atomic() when
prefetching indirect PTEs (direct_pte_prefetch_many() already uses the
"to page" APIS). Functionally, the two are subtly equivalent, as the "to
pfn" API short-circuits hva_to_pfn() if hva_to_pfn_fast() fails, i.e. is
just a wrapper for get_user_page_fast_only()/get_user_pages_fast_only().
Switching to the "to page" API will allow dropping the @atomic parameter
from the entire hva_to_pfn() callchain.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-11-seanjc@google.com>
|
|
Now that KVM doesn't clobber Accessed bits of shadow-present SPTEs,
e.g. when prefetching, mark folios as accessed only when zapping leaf
SPTEs, which is a rough heuristic for "only in response to an mmu_notifier
invalidation". Page aging and LRUs are tolerant of false negatives, i.e.
KVM doesn't need to be precise for correctness, and re-marking folios as
accessed when zapping entire roots or when zapping collapsible SPTEs is
expensive and adds very little value.
E.g. when a VM is dying, all of its memory is being freed; marking folios
accessed at that time provides no known value. Similarly, because KVM
marks folios as accessed when creating SPTEs, marking all folios as
accessed when userspace happens to delete a memslot doesn't add value.
The folio was marked access when the old SPTE was created, and will be
marked accessed yet again if a vCPU accesses the pfn again after reloading
a new root. Zapping collapsible SPTEs is a similar story; marking folios
accessed just because userspace disable dirty logging is a side effect of
KVM behavior, not a deliberate goal.
As an intermediate step, a.k.a. bisection point, towards *never* marking
folios accessed when dropping SPTEs, mark folios accessed when the primary
MMU might be invalidating mappings, as such zappings are not KVM initiated,
i.e. might actually be related to page aging and LRU activity.
Note, x86 is the only KVM architecture that "double dips"; every other
arch marks pfns as accessed only when mapping into the guest, not when
mapping into the guest _and_ when removing from the guest.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-10-seanjc@google.com>
|
|
Mark pages/folios dirty when creating SPTEs to map PFNs into the guest,
not when zapping or modifying SPTEs, as marking folios dirty when zapping
or modifying SPTEs can be extremely inefficient. E.g. when KVM is zapping
collapsible SPTEs to reconstitute a hugepage after disbling dirty logging,
KVM will mark every 4KiB pfn as dirty, even though _at least_ 512 pfns are
guaranteed to be in a single folio (the SPTE couldn't potentially be huge
if that weren't the case). The problem only becomes worse for 1GiB
HugeTLB pages, as KVM can mark a single folio dirty 512*512 times.
Marking a folio dirty when mapping is functionally safe as KVM drops all
relevant SPTEs in response to an mmu_notifier invalidation, i.e. ensures
that the guest can't dirty a folio after access has been removed.
And because KVM already marks folios dirty when zapping/modifying SPTEs
for KVM reasons, i.e. not in response to an mmu_notifier invalidation,
there is no danger of "prematurely" marking a folio dirty. E.g. if a
filesystems cleans a folio without first removing write access, then there
already exists races where KVM could mark a folio dirty before remote TLBs
are flushed, i.e. before guest writes are guaranteed to stop. Furthermore,
x86 is literally the only architecture that marks folios dirty on the
backend; every other KVM architecture marks folios dirty at map time.
x86's unique behavior likely stems from the fact that x86's MMU predates
mmu_notifiers. Long, long ago, before mmu_notifiers were added, marking
pages dirty when zapping SPTEs was logical, and perhaps even necessary, as
KVM held references to pages, i.e. kept a page's refcount elevated while
the page was mapped into the guest. At the time, KVM's rmap_remove()
simply did:
if (is_writeble_pte(*spte))
kvm_release_pfn_dirty(pfn);
else
kvm_release_pfn_clean(pfn);
i.e. dropped the refcount and marked the page dirty at the same time.
After mmu_notifiers were introduced, commit acb66dd051d0 ("KVM: MMU:
don't hold pagecount reference for mapped sptes pages") removed the
refcount logic, but kept the dirty logic, i.e. converted the above to:
if (is_writeble_pte(*spte))
kvm_release_pfn_dirty(pfn);
And for KVM x86, that's essentially how things have stayed over the last
~15 years, without anyone revisiting *why* KVM marks pages/folios dirty at
zap/modification time, e.g. the behavior was blindly carried forward to
the TDP MMU.
Practically speaking, the only downside to marking a folio dirty during
mapping is that KVM could trigger writeback of memory that was never
actually written. Except that can't actually happen if KVM marks folios
dirty if and only if a writable SPTE is created (as done here), because
KVM always marks writable SPTEs as dirty during make_spte(). See commit
9b51a63024bd ("KVM: MMU: Explicitly set D-bit for writable spte."), circa
2015.
Note, KVM's access tracking logic for prefetched SPTEs is a bit odd. If a
guest PTE is dirty and writable, KVM will create a writable SPTE, but then
mark the SPTE for access tracking. Which isn't wrong, just a bit odd, as
it results in _more_ precise dirty tracking for MMUs _without_ A/D bits.
To keep things simple, mark the folio dirty before access tracking comes
into play, as an access-tracked SPTE can be restored in the fast page
fault path, i.e. without holding mmu_lock. While writing SPTEs and
accessing memslots outside of mmu_lock is safe, marking a folio dirty is
not. E.g. if the fast path gets interrupted _just_ after setting a SPTE,
the primary MMU could theoretically invalidate and free a folio before KVM
marks it dirty. Unlike the shadow MMU, which waits for CPUs to respond to
an IPI, the TDP MMU only guarantees the page tables themselves won't be
freed (via RCU).
Opportunistically update a few stale comments.
Cc: David Matlack <dmatlack@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-9-seanjc@google.com>
|
|
Set the Accessed bit when making a "new" SPTE during SPTE synchronization,
as _clearing_ the Accessed bit is counter-productive, and even if the
Accessed bit wasn't set in the old SPTE, odds are very good the guest will
access the page in the near future, as the most common case where KVM
synchronizes a shadow-present SPTE is when the guest is making the gPTE
read-only for Copy-on-Write (CoW).
Preserving the Accessed bit will allow dropping the logic that propagates
the Accessed bit to the underlying struct page when overwriting an existing
SPTE, without undue risk of regressing page aging.
Note, KVM's current behavior is very deliberate, as SPTE synchronization
was the only "speculative" access type as of commit 947da5383069 ("KVM:
MMU: Set the accessed bit on non-speculative shadow ptes").
But, much has changed since 2008, and more changes are on the horizon.
Spurious clearing of the Accessed (and Dirty) was mitigated by commit
e6722d9211b2 ("KVM: x86/mmu: Reduce the update to the spte in
FNAME(sync_spte)"), which changed FNAME(sync_spte) to only overwrite SPTEs
if the protections are actually changing. I.e. KVM is already preserving
Accessed information for SPTEs that aren't dropping protections.
And with the aforementioned future change to NOT mark the page/folio as
accessed, KVM's SPTEs will become the "source of truth" so to speak, in
which case clearing the Accessed bit outside of page aging becomes very
undesirable.
Suggested-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-8-seanjc@google.com>
|
|
Invert the polarity of "can_unsync" and rename the parameter to
"synchronizing" to allow a future change to set the Accessed bit if KVM
is synchronizing an existing SPTE. Querying "can_unsync" in that case is
nonsensical, as the fact that KVM can't unsync SPTEs doesn't provide any
justification for setting the Accessed bit.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-7-seanjc@google.com>
|
|
Treat attempts to prefetch/prefault MMU SPTEs as spurious if there's an
existing shadow-present SPTE, as overwriting a SPTE that may have been
create by a "real" fault is at best confusing, and at worst potentially
harmful. E.g. mmu_try_to_unsync_pages() doesn't unsync when prefetching,
which creates a scenario where KVM could try to replace a Writable SPTE
with a !Writable SPTE, as sp->unsync is checked prior to acquiring
mmu_unsync_pages_lock.
Note, this applies to three of the four flavors of "prefetch" in KVM:
- KVM_PRE_FAULT_MEMORY
- Async #PF (host or PV)
- Prefetching
The fourth flavor, SPTE synchronization, i.e. FNAME(sync_spte), _only_
overwrites shadow-present SPTEs when calling make_spte(). But SPTE
synchronization specifically uses mmu_spte_update(), and so naturally
avoids the @prefetch check in mmu_set_spte().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-6-seanjc@google.com>
|
|
Apply make_spte()'s optimization to skip trying to unsync shadow pages if
and only if the old SPTE was a leaf SPTE, as non-leaf SPTEs in direct MMUs
are always writable, i.e. could trigger a false positive and incorrectly
lead to KVM creating a SPTE without write-protecting or marking shadow
pages unsync.
This bug only affects the TDP MMU, as the shadow MMU only overwrites a
shadow-present SPTE when synchronizing SPTEs (and only 4KiB SPTEs can be
unsync). Specifically, mmu_set_spte() drops any non-leaf SPTEs *before*
calling make_spte(), whereas the TDP MMU can do a direct replacement of a
page table with the leaf SPTE.
Opportunistically update the comment to explain why skipping the unsync
stuff is safe, as opposed to simply saying "it's someone else's problem".
Cc: stable@vger.kernel.org
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-5-seanjc@google.com>
|
|
Remove KVM_ERR_PTR_BAD_PAGE and instead return NULL, as "bad page" is just
a leftover bit of weirdness from days of old when KVM stuffed a "bad" page
into the guest instead of actually handling missing pages. See commit
cea7bb21280e ("KVM: MMU: Make gfn_to_page() always safe").
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-2-seanjc@google.com>
|
|
The x86 user pointer validation changes made me look at compiler output
a lot, and the wrong indentation for the ".popsection" in the generated
assembler triggered me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical
accesses in kernel space. And so using just the high bit to decide
whether an access is in user space or kernel space ends up with the good
old "leak speculative data" if you have the right gadget using the
result:
CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“
Now, the kernel surrounds the access with a STAC/CLAC pair, and those
instructions end up serializing execution on older Zen architectures,
which closes the speculation window.
But that was true only up until Zen 5, which renames the AC bit [1].
That improves performance of STAC/CLAC a lot, but also means that the
speculation window is now open.
Note that this affects not just the new address masking, but also the
regular valid_user_address() check used by access_ok(), and the asm
version of the sign bit check in the get_user() helpers.
It does not affect put_user() or clear_user() variants, since there's no
speculative result to be used in a gadget for those operations.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Link: https://lore.kernel.org/all/80d94591-1297-4afb-b510-c665efd37f10@citrix.com/
Link: https://lore.kernel.org/all/20241023094448.GAZxjFkEOOF_DM83TQ@fat_crate.local/ [1]
Link: https://www.amd.com/en/resources/product-security/bulletin/amd-sb-1010.html
Link: https://arxiv.org/pdf/2108.10771
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com> # LAM case
Fixes: 2865baf54077 ("x86: support user address masking instead of non-speculative conditional")
Fixes: 6014bc27561f ("x86-64: make access_ok() independent of LAM")
Fixes: b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
RerVision A33-Vstar board is a board based on their A33-Core1 SoM (A33
SoC + 512MiB DRAM + 4GiB eMMC + AXP223 PMIC), with multiple peripherals:
- MicroSD card slot
- 4.0mm/1.7mm DC jack connected to ACIN of AXP223 (and a XH2.54 2-pin
connector for alternative 5V DC IN)
- OTG-capable microUSB port
- Reserved pads for soldering Li-ion battery and/or 3V RTC battery
- 3 LRADC-attached keys and 2 fixed function power/reset keys
- AP6212 Wi-Fi/BT combo module
- On-board GL850G hub attached to the USB host port of A33, and a
RTL8152 USB Ethernet chip at the downstream of the hub
- Onboard microphone (not supported yet) and headphone jack
- 3 UART ports as PH2.0 3-pin connectors (UART2 one is currently used as
debug output and others are ignored yet)
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20240913104845.4112986-2-uwu@icenowy.me
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Adding disable-wp property for micro SD nodes of Allwinner arm64 devices.
Boards were verified from online pictures/tables
that they have micro SD slots.
Signed-off-by: Kryštof Černý <cleverline1mc@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20240919-b4-nanopineoplus2-fix-mmc0-wp-v2-1-c708a9abc9eb@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Currently, an unconditional cache flush is performed during every
microcode update. Although the original changelog did not mention
a specific erratum, this measure was primarily intended to address
a specific microcode bug, the load of which has already been blocked by
is_blacklisted(). Therefore, this cache flush is no longer necessary.
Additionally, the side effects of doing this have been overlooked. It
increases CPU rendezvous time during late loading, where the cache flush
takes between 1x to 3.5x longer than the actual microcode update.
Remove native_wbinvd() and update the erratum name to align with the
latest errata documentation, document ID 334163 Version 022US.
[ bp: Zap the flaky documentation URL. ]
Fixes: 91df9fdf5149 ("x86/microcode/intel: Writeback and invalidate caches before updating microcode")
Reported-by: Yan Hua Wu <yanhua1.wu@intel.com>
Reported-by: William Xie <william.xie@intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Yan Hua Wu <yanhua1.wu@intel.com>
Link: https://lore.kernel.org/r/20241001161042.465584-2-chang.seok.bae@intel.com
|
|
The callsite layout for arm64 fentry is:
mov x9, lr
nop
When a bpf prog is attached, the nop instruction is patched to a call
to bpf trampoline:
mov x9, lr
bl <bpf trampoline>
So two return addresses are passed to bpf trampoline: the return address
for the traced function/prog, stored in x9, and the return address for
the bpf trampoline itself, stored in lr. To obtain a full and accurate
call stack, the bpf trampoline constructs two fake function frames using
x9 and lr.
However, struct_ops progs are invoked directly as function callbacks,
meaning that x9 is not set as it is in the fentry callsite. In this case,
the frame constructed using x9 is garbage. The following stack trace for
struct_ops, captured by perf sampling, illustrates this issue, where
tcp_ack+0x404 is a garbage frame:
ffffffc0801a04b4 bpf_prog_50992e55a0f655a9_bpf_cubic_cong_avoid+0x98 (bpf_prog_50992e55a0f655a9_bpf_cubic_cong_avoid)
ffffffc0801a228c [unknown] ([kernel.kallsyms]) // bpf trampoline
ffffffd08d362590 tcp_ack+0x798 ([kernel.kallsyms]) // caller for bpf trampoline
ffffffd08d3621fc tcp_ack+0x404 ([kernel.kallsyms]) // garbage frame
ffffffd08d36452c tcp_rcv_established+0x4ac ([kernel.kallsyms])
ffffffd08d375c58 tcp_v4_do_rcv+0x1f0 ([kernel.kallsyms])
ffffffd08d378630 tcp_v4_rcv+0xeb8 ([kernel.kallsyms])
To fix it, construct only one frame using lr for struct_ops.
The above stack trace also indicates that there is no kernel symbol for
struct_ops bpf trampoline. This will be addressed in a follow-up patch.
Fixes: efc9909fdce0 ("bpf, arm64: Add bpf trampoline for arm64")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20241025085220.533949-1-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The DCDC5 voltage rail in the X-Powers AXP809 PMIC has a resolution of
50mV, so the currently enforced limits of 1.475 and 1.525 volts cannot
be set, when the existing regulator value is beyond this range.
This will lead to the whole regulator driver to give up and fail
probing, which in turn will hang the system, as essential devices depend
on the PMIC.
In this case a bug in U-Boot set the voltage to 1.75V (meant for DCDC4),
and the AXP driver's attempt to correct this lead to this error:
==================
[ 4.447653] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[ 4.450066] vcc-dram: Bringing 1750000uV into 1575000-1575000uV
[ 4.460272] vcc-dram: failed to apply 1575000-1575000uV constraint: -EINVAL
[ 4.474788] axp20x-regulator axp20x-regulator.0: Failed to register dcdc5
[ 4.482276] axp20x-regulator axp20x-regulator.0: probe with driver axp20x-regulator failed with error -22
==================
Set the limits to values that can be programmed, so any correction will
be successful.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes: 1e1dea72651b ("ARM: dts: sun9i: cubieboard4: Add AXP809 PMIC device node and regulators")
Link: https://patch.msgid.link/20241007222916.19013-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
supported boards
Now that the H616 (and variants) audio codec is supported, enable it for
boards with a mainline DTS. The Tanix TX1, Transpeed 8K618-T and X-96
Mate have all been tested with the onboard 3.5mm audio jack and the
Orange Pi Zero 3 with a 3.5mm jack connected to the audio header.
The RG35XX (2024, -H, -Plus and -SP variants) are also tested working
but have a separate mux and GPIO-controlled (PI5) power amplifier to
support both a headphone jack and onboard speakers.
The headphone jack has a GPIO for jack detection, but this is not
currently supported by the driver, so audio is heard both via the
headphone jack and speakers when the speaker amp is powered (by the
CLDO1 regulator, defined as always-on until proper jack detection is
implemented).
Define the audio codec and routing for all supported H616 and variant
boards, and power and speaker amp enablement where present on boards and
known.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241023075917.186835-8-ryan@testtoast.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Now that the sun4i codec driver supports the H616, add a node in the
device tree for it (correcting the spdif block location at the same
time).
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241023075917.186835-7-ryan@testtoast.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
