| Age | Commit message (Collapse) | Author |
|---|
|
If CONFIG_I2C=n:
WARNING: unmet direct dependencies detected for SND_SOC_AK4642
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && I2C [=n]
Selected by [y]:
- SH_7724_SOLUTION_ENGINE [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]
WARNING: unmet direct dependencies detected for SND_SOC_DA7210
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_SOC_I2C_AND_SPI [=n]
Selected by [y]:
- SH_ECOVEC [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]
Fix this by replacing select by imply, instead of adding a dependency on
I2C.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501240836.OvXqmANX-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
Commit 654102df2ac2 ("kbuild: add generic support for built-in
boot DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
To keep consistency across architectures, this commit also renames
CONFIG_USE_BUILTIN_DTB to CONFIG_BUILTIN_DTB, and
CONFIG_BUILTIN_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
On a system with n CPUs and m interrupts, there will be n*m decimal
values yielded via seq_printf(.."%10u "..) which has significant costs
parsing format string and is less efficient than seq_put_decimal_ull_width().
Stress reading /proc/interrupts indicates ~30% performance improvement with
this patch.
Signed-off-by: David Wang <00107082@163.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
The recent changes to debug state management broke self-hosted debug for
guests when running in protected mode, since both the debug owner and
the debug state itself aren't shared with the hyp's view of the vcpu.
Fix it by flushing/syncing the relevant bits with the hyp vcpu.
Fixes: beb470d96cec ("KVM: arm64: Use debug_owner to track if debug regs need save/restore")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/kvmarm/5f62740f-a065-42d9-9f56-8fb648b9c63f@sirena.org.uk/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250131222922.1548780-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bcain/linux
Pull hexagon updates from Brian Cain:
- Move kernel prototypes out of uapi header to internal header
- Fix to address an unbalanced spinlock
- Miscellaneous patches to fix static checks
- Update bcain@quicinc.com->brian.cain@oss.qualcomm.com
* tag 'for-linus-hexagon-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/bcain/linux:
MAINTAINERS: Update my email address
hexagon: Fix unbalanced spinlock in die()
hexagon: Fix warning comparing pointer to 0
hexagon: Move kernel prototypes out of uapi/asm/setup.h header
hexagon: time: Remove redundant null check for resource
hexagon: fix using plain integer as NULL pointer warning in cmpxchg
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The PH1520 pinctrl and dwmac drivers are enabeled in defconfig
- A redundant AQRL barrier has been removed from the futex cmpxchg
implementation
- Support for the T-Head vector extensions, which includes exposing
these extensions to userspace on systems that implement them
- Some more page table information is now printed on die() and systems
that cause PA overflows
* tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: add a warning when physical memory address overflows
riscv/mm/fault: add show_pte() before die()
riscv: Add ghostwrite vulnerability
selftests: riscv: Support xtheadvector in vector tests
selftests: riscv: Fix vector tests
riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
riscv: hwprobe: Add thead vendor extension probing
riscv: vector: Support xtheadvector save/restore
riscv: Add xtheadvector instruction definitions
riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
RISC-V: define the elements of the VCSR vector CSR
riscv: vector: Use vlenb from DT for thead
riscv: Add thead and xtheadvector as a vendor extension
riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
dt-bindings: cpus: add a thead vlen register length property
dt-bindings: riscv: Add xtheadvector ISA extension description
RISC-V: Mark riscv_v_init() as __init
riscv: defconfig: drop RT_GROUP_SCHED=y
riscv/futex: Optimize atomic cmpxchg
riscv: defconfig: enable pinctrl and dwmac support for TH1520
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
* tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (64 commits)
kbuild: fix Clang LTO with CONFIG_OBJTOOL=n
kbuild: Strip runtime const RELA sections correctly
kconfig: fix memory leak in sym_warn_unmet_dep()
kconfig: fix file name in warnings when loading KCONFIG_DEFCONFIG_LIST
genksyms: fix syntax error for attribute before init-declarator
genksyms: fix syntax error for builtin (u)int*x*_t types
genksyms: fix syntax error for attribute after 'union'
genksyms: fix syntax error for attribute after 'struct'
genksyms: fix syntax error for attribute after abstact_declarator
genksyms: fix syntax error for attribute before nested_declarator
genksyms: fix syntax error for attribute before abstract_declarator
genksyms: decouple ATTRIBUTE_PHRASE from type-qualifier
genksyms: record attributes consistently for init-declarator
genksyms: restrict direct-declarator to take one parameter-type-list
genksyms: restrict direct-abstract-declarator to take one parameter-type-list
genksyms: remove Makefile hack
genksyms: fix last 3 shift/reduce conflicts
genksyms: fix 6 shift/reduce conflicts and 5 reduce/reduce conflicts
genksyms: reduce type_qualifier directly to decl_specifier
genksyms: rename cvar_qualifier to type_qualifier
...
|
|
Due to the fact that runtime const ELF sections are named without a
leading period or double underscore, the RSTRIP logic that removes the
static RELA sections from vmlinux fails to identify them. This results
in a situation like below, where some sections that were supposed to get
removed are left behind.
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[58] runtime_shift_d_hash_shift PROGBITS ffffffff83500f50 2900f50 000014 00 A 0 0 1
[59] .relaruntime_shift_d_hash_shift RELA 0000000000000000 55b6f00 000078 18 I 70 58 8
[60] runtime_ptr_dentry_hashtable PROGBITS ffffffff83500f68 2900f68 000014 00 A 0 0 1
[61] .relaruntime_ptr_dentry_hashtable RELA 0000000000000000 55b6f78 000078 18 I 70 60 8
[62] runtime_ptr_USER_PTR_MAX PROGBITS ffffffff83500f80 2900f80 000238 00 A 0 0 1
[63] .relaruntime_ptr_USER_PTR_MAX RELA 0000000000000000 55b6ff0 000d50 18 I 70 62 8
So tweak the match expression to strip all sections starting with .rel.
While at it, consolidate the logic used by RISC-V, s390 and x86 into a
single shared Makefile library command.
Link: https://lore.kernel.org/all/CAHk-=wjk3ynjomNvFN8jf9A1k=qSc=JFF591W00uXj-qqNUxPQ@mail.gmail.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
- The biggest changes are the TLB flushing scalability optimizations,
to update the mm_cpumask lazily and related changes.
This feature has both a track record and a continued risk of
performance regressions, so it was already delayed by a cycle - but
it's all 100% perfect now™ (Rik van Riel)
- Also miscellaneous fixes and cleanups. (Gautam Somani, Kirill
Shutemov, Sebastian Andrzej Siewior)
* tag 'x86-mm-2025-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove unnecessary include of <linux/extable.h>
x86/mtrr: Rename mtrr_overwrite_state() to guest_force_mtrr_state()
x86/mm/selftests: Fix typo in lam.c
x86/mm/tlb: Only trim the mm_cpumask once a second
x86/mm/tlb: Also remove local CPU from mm_cpumask if stale
x86/mm/tlb: Add tracepoint for TLB flush IPI to stale CPU
x86/mm/tlb: Update mm_cpumask lazily
|
|
Shadow page tables use page->index to keep the g2 address of the guest
page table being shadowed.
Instead of keeping the information in page->index, split the address
and smear it over the 16-bit softbits areas of 4 PGSTEs.
This removes the last s390 user of page->index.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-16-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-16-imbrenda@linux.ibm.com>
|
|
Move the softbits in the PGSTEs to the other usable area.
This leaves the 16-bit block of usable bits free, which will be used in the
next patch for something else.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-15-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-15-imbrenda@linux.ibm.com>
|
|
The page->index field for VSIE dat tables is only used for segment
tables.
Stop setting the field for all region tables.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-14-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-14-imbrenda@linux.ibm.com>
|
|
Move gmap_shadow_pgt_lookup() from mm/gmap.c into kvm/gaccess.c .
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-13-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-13-imbrenda@linux.ibm.com>
|
|
Until now, every dat table allocated to map a guest was put in a
linked list. The page->lru field of struct page was used to keep track
of which pages were being used, and when the gmap is torn down, the
list was walked and all pages freed.
This patch gets rid of the usage of page->lru. Page tables are now
freed by recursively walking the dat table tree.
Since s390_unlist_old_asce() becomes useless now, remove it.
Acked-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-12-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-12-imbrenda@linux.ibm.com>
|
|
The host_to_guest radix tree will now map userspace addresses to guest
addresses, instead of userspace addresses to segment tables.
When segment tables and page tables are needed, they are found using an
additional gmap_table_walk().
This gets rid of all usage of page->index for non-shadow gmaps.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-11-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-11-imbrenda@linux.ibm.com>
|
|
Move some gmap shadowing functions from mm/gmap.c to kvm/kvm-s390.c and
the newly created kvm/gmap-vsie.c
This is a step toward removing gmap from mm.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-10-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-10-imbrenda@linux.ibm.com>
|
|
Add gpa_to_hva(), which uses memslots, and use it to replace all uses
of gmap_translate().
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-9-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-9-imbrenda@linux.ibm.com>
|
|
All gmap page faults are already handled in kvm by the function
kvm_s390_handle_dat_fault(); only few users of gmap_fault remained, all
within kvm.
Convert those calls to use kvm_s390_handle_dat_fault() instead.
Remove gmap_fault() entirely since it has no more users.
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-8-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-8-imbrenda@linux.ibm.com>
|
|
Refactor the existing page fault handling code to use __kvm_faultin_pfn().
This possible now that memslots are always present.
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-7-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-7-imbrenda@linux.ibm.com>
|
|
Move gmap related functions from kernel/uv into kvm.
Create a new file to collect gmap-related functions.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
[fixed unpack_one(), thanks mhartmay@linux.ibm.com]
Link: https://lore.kernel.org/r/20250123144627.312456-6-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-6-imbrenda@linux.ibm.com>
|
|
Create a fake memslot for ucontrol VMs. The fake memslot identity-maps
userspace.
Now memslots will always be present, and ucontrol is not a special case
anymore.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-4-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-4-imbrenda@linux.ibm.com>
|
|
Wrap the call to KVM_BUG; this reduces code duplication and improves
readability.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250123144627.312456-3-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-3-imbrenda@linux.ibm.com>
|
|
Now that we no longer use page->index and the page refcount explicitly,
let's avoid messing with "struct page" completely.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Message-ID: <20250107154344.1003072-5-david@redhat.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Let's stop messing with the page refcount, and use a flag that is set /
cleared atomically to remember whether a vsie page is currently in use.
Note that we could use a page flag, or a lower bit of the scb_gpa. Let's
keep it simple for now, we have sufficient space.
While at it, stop passing "struct kvm *" to put_vsie_page(), it's
unused.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Message-ID: <20250107154344.1003072-4-david@redhat.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Let's stop using page->index, and instead use a field inside "struct
vsie_page" to hold that value. We have plenty of space left in there.
This is one part of stopping using "struct page" when working with vsie
pages. We place the "page_to_virt(page)" strategically, so the next
cleanups requires less churn.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Message-ID: <20250107154344.1003072-3-david@redhat.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
We try to reuse the same vsie page when re-executing the vsie with a
given SCB address. The result is that we use the same shadow SCB --
residing in the vsie page -- and can avoid flushing the TLB when
re-running the vsie on a CPU.
So, when we allocate a fresh vsie page, or when we reuse a vsie page for
a different SCB address -- reusing the shadow SCB in different context --
we set ihcpu=0xffff to trigger the flush.
However, after we looked up the SCB address in the radix tree, but before
we grabbed the vsie page by raising the refcount to 2, someone could reuse
the vsie page for a different SCB address, adjusting page->index and the
radix tree. In that case, we would be reusing the vsie page with a
wrong page->index.
Another corner case is that we might set the SCB address for a vsie
page, but fail the insertion into the radix tree. Whoever would reuse
that page would remove the corresponding radix tree entry -- which might
now be a valid entry pointing at another page, resulting in the wrong
vsie page getting removed from the radix tree.
Let's handle such races better, by validating that the SCB address of a
vsie page didn't change after we grabbed it (not reuse for a different
SCB; the alternative would be performing another tree lookup), and by
setting the SCB address to invalid until the insertion in the tree
succeeded (SCB addresses are aligned to 512, so ULONG_MAX is invalid).
These scenarios are rare, the effects a bit unclear, and these issues were
only found by code inspection. Let's CC stable to be safe.
Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization")
Cc: stable@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Message-ID: <20250107154344.1003072-2-david@redhat.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
This reverts commit bc7584e009c39375294794f7ca751a6b2622c425.
The split IPC system calls for o32 have been introduced with modern
version only. Changing this breaks ABI.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
die executes holding the spinlock of &die.lock and unlock
it after printing the oops message.
However in the code if the notify_die() returns NOTIFY_STOP
, die() exit with returning 1 but never unlocked the spinlock.
Fix this by adding spin_unlock_irq(&die.lock) before returning.
Fixes: cf9750bae262 ("Hexagon: Provide basic debugging and system trap support.")
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Link: https://lore.kernel.org/r/20230522025608.2515558-1-linyujun809@huawei.com
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Brian Cain <brian.cain@oss.qualcomm.com>
|
|
./arch/hexagon/kernel/traps.c:138:6-7: WARNING comparing pointer to 0
Avoid pointer type value compared with 0 to make code clear.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3978
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230208011105.80219-1-yang.lee@linux.alibaba.com
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Brian Cain <brian.cain@oss.qualcomm.com>
|
|
The kernel function prototypes are of no use for userspace and
shouldn't get exposed in an uapi header, so let's move them into
an internal header instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240502173818.58152-1-thuth@redhat.com
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Brian Cain <brian.cain@oss.qualcomm.com>
|
|
Null check for 'resource' before assignment is unnecessary because the
variable 'resource' is initialized to NULL at the beginning of the function.
Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
Link: https://lore.kernel.org/r/20241111142458.67854-1-hardevsinh.palaniya@siliconsignals.io
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Brian Cain <brian.cain@oss.qualcomm.com>
|
|
Sparse reports
net/ipv4/inet_diag.c:1511:17: sparse: sparse: Using plain integer as NULL pointer
Due to this code calling cmpxchg on a non-integer type
struct inet_diag_handler *
return !cmpxchg((const struct inet_diag_handler**)&inet_diag_table[type],
NULL, h) ? 0 : -EEXIST;
While hexagon's cmpxchg assigns an integer value to a variable of this
type.
__typeof__(*(ptr)) __oldval = 0;
Update this assignment to cast 0 to the correct type.
The original issue is easily reproduced at head with the below block,
and is absent after this change.
make LLVM=1 ARCH=hexagon defconfig
make C=1 LLVM=1 ARCH=hexagon net/ipv4/inet_diag.o
Fixes: 99a70aa051d2 ("Hexagon: Add processor and system headers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411091538.PGSTqUBi-lkp@intel.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Christian Gmeiner <cgmeiner@igalia.com>
Link: https://lore.kernel.org/r/20241203221736.282020-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Brian Cain <brian.cain@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- hostfs: Convert to writepages
- many cleanups: removal of dead macros, missing __init
* tag 'uml-for-linus-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Remove unused asm/archparam.h header
um: Include missing headers in asm/pgtable.h
hostfs: Convert to writepages
um: rtc: use RTC time when calculating the alarm
um: Remove unused user_context function
um: Remove unused THREAD_NAME_LEN macro
um: Remove unused PGD_BOUND macro
um: Mark setup_env_path as __init
um: Mark install_fatal_handler as __init
um: Mark set_stklim as __init
um: Mark get_top_address as __init
um: Mark parse_cache_line as __init
um: Mark parse_host_cpu_flags as __init
um: Count iomem_size only once in physmem calculation
um: Remove obsolete fixmap support
um: Remove unused MODULES_LEN macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Not much this cycle, there are multiple small fixes.
Core:
- use boolean values with device_init_wakeup()
Drivers:
- pcf2127: add BSM support
- pcf85063: fix possible out of bounds write"
* tag 'rtc-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: pcf2127: add BSM support
rtc: Remove hpet_rtc_dropped_irq()
dt-bindings: rtc: mxc: Document fsl,imx31-rtc
rtc: stm32: Use syscon_regmap_lookup_by_phandle_args
rtc: zynqmp: Fix optional clock name property
rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr()
rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read
rtc: tps6594: Fix integer overflow on 32bit systems
rtc: use boolean values with device_init_wakeup()
rtc: RTC_DRV_SPEAR should not default to y when compile-testing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Add a new ACPI-related quirk for Vexia EDU ATLA 10 tablet 5V (Hans de
Goede) and fix the MADT parsing code so that CPUs with different entry
types (LAPIC and x2APIC) are initialized in the order in which they
appear in the MADT as required by the ACPI specification (Zhang Rui)"
* tag 'acpi-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/acpi: Fix LAPIC/x2APIC parsing order
ACPI: x86: Add skip i2c clients quirk for Vexia EDU ATLA 10 tablet 5V
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Architecutre-specific ftrace recursion trylock tests were removed in
favour of the generic function_graph_enter(), but s390 got missed.
Remove this test for s390 as well.
- Add ftrace_get_symaddr() for s390, which returns the symbol address
from ftrace 'ip' parameter
* tag 's390-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/tracing: Define ftrace_get_symaddr() for s390
s390/fgraph: Fix to remove ftrace_test_recursion_trylock()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- The rework that uncoupled physical and virtual address spaces
inadvertently prevented KASAN shadow mappings from using large pages.
Restore large page mappings for KASAN shadows
- Add decompressor routine physmem_alloc() that may fail, unlike
physmem_alloc_or_die(). This allows callers to implement fallback
paths
- Allow falling back from large pages to smaller pages (1MB or 4KB) if
the allocation of 2GB pages in the decompressor can not be fulfilled
- Add to the decompressor boot print support of "%%" format string,
width and padding hadnling, length modifiers and decimal conversion
specifiers
- Add to the decompressor message severity levels similar to kernel
ones. Support command-line options that control console output
verbosity
- Replaces boot_printk() calls with appropriate loglevel- specific
helpers such as boot_emerg(), boot_warn(), and boot_debug().
- Collect all boot messages into a ring buffer independent of the
current log level. This is particularly useful for early crash
analysis
- If 'earlyprintk' command line parameter is not specified, store
decompressor boot messages in a ring buffer to be printed later by
the kernel, once the console driver is registered
- Add 'bootdebug' command line parameter to enable printing of
decompressor debug messages when needed. That parameters allows
message suppressing and filtering
- Dump boot messages on a decompressor crash, but only if 'bootdebug'
command line parameter is enabled
- When CONFIG_PRINTK_TIME is enabled, add timestamps to boot messages
in the same format as regular printk()
- Dump physical memory tracking information on boot: online ranges,
reserved areas and vmem allocations
- Dump virtual memory layout and randomization details
- Improve decompression error reporting and dump the message ring
buffer in case the boot failed and system halted
- Add an exception handler which handles exceptions when FPU control
register is attempted to be set to an invalid value. Remove '.fixup'
section as result of this change
- Use 'A', 'O', and 'R' inline assembly format flags, which allows
recent Clang compilers to generate better FPU code
- Rework uaccess code so it reads better and generates more efficient
code
- Cleanup futex inline assembly code
- Disable KMSAN instrumention for futex inline assemblies, which
contain dereferenced user pointers. Otherwise, shadows for the user
pointers would be accessed
- PFs which are not initially configured but in standby create only a
single-function PCI domain. If they are configured later on, sibling
PFs and their child VFs will not be added to their PCI domain
breaking SR-IOV expectations.
Fix that by allowing initially configured but in standby PFs create
multi-function PCI domains
- Add '-std=gnu11' to decompressor and purgatory CFLAGS to avoid
compile errors caused by kernel's own definitions of 'bool', 'false',
and 'true' conflicting with the C23 reserved keywords
- Fix sclp subsystem failure when a sclp console is not present
- Fix misuse of non-NULL terminated strings in vmlogrdr driver
- Various other small improvements, cleanups and fixes
* tag 's390-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits)
s390/vmlogrdr: Use array instead of string initializer
s390/vmlogrdr: Use internal_name for error messages
s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init()
s390/tools: Use array instead of string initializer
s390/vmem: Fix null-pointer-arithmetic warning in vmem_map_init()
s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS
s390/bitops: Use correct constraint for arch_test_bit() inline assembly
s390/pci: Fix SR-IOV for PFs initially in standby
s390/futex: Avoid KMSAN instrumention for user pointers
s390/uaccess: Rename get_put_user_noinstr_attributes to uaccess_kmsan_or_inline
s390/futex: Cleanup futex_atomic_cmpxchg_inatomic()
s390/futex: Generate futex atomic op functions
s390/uaccess: Remove INLINE_COPY_FROM_USER and INLINE_COPY_TO_USER
s390/uaccess: Use asm goto for put_user()/get_user()
s390/uaccess: Remove usage of the oac specifier
s390/uaccess: Replace EX_TABLE_UA_LOAD_MEM exception handling
s390/uaccess: Cleanup noinstr __put_user()/__get_user() inline assembly constraints
s390/uaccess: Remove __put_user_fn()/__get_user_fn() wrappers
s390/uaccess: Move put_user() / __put_user() close to put_user() asm code
s390/uaccess: Use asm goto for __mvc_kernel_nofault()
...
|
|
GCC 15 changed the default C standard version to C23, which should not
have impacted the kernel because it requests the gnu11 standard via
'-std=' in the main Makefile. However, the x86 compressed boot Makefile
uses its own set of KBUILD_CFLAGS without a '-std=' value (i.e., using
the default), resulting in errors from the kernel's definitions of bool,
true, and false in stddef.h, which are reserved keywords under C23.
./include/linux/stddef.h:11:9: error: expected identifier before ‘false’
11 | false = 0,
./include/linux/types.h:35:33: error: two or more data types in declaration specifiers
35 | typedef _Bool bool;
Set '-std=gnu11' in the x86 compressed boot Makefile to resolve the
error and consistently use the same C standard version for the entire
kernel.
Closes: https://lore.kernel.org/4OAhbllK7x4QJGpZjkYjtBYNLd_2whHx9oFiuZcGwtVR4hIzvduultkgfAIRZI3vQpZylu7Gl929HaYFRGeMEalWCpeMzCIIhLxxRhq4U-Y=@protonmail.com/
Closes: https://lore.kernel.org/Z4467umXR2PZ0M1H@tucnak/
Reported-by: Kostadin Shishmanov <kostadinshishmanov@protonmail.com>
Reported-by: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250121-x86-use-std-consistently-gcc-15-v1-1-8ab0acf645cb%40kernel.org
|
|
The part of physical memory that exceeds the size of the linear mapping
will be discarded. When the system starts up normally, a warning message
will be printed to prevent confusion caused by the mismatch between the
system memory and the actual physical memory.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240814062625.19794-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"Three minor fixes"
* tag 'for-linus-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: update pvcalls_front_accept prototype
Grab mm lock before grabbing pt lock
xen: pcpu: remove unnecessary __ref annotation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix to handle PE state in pseries_eeh_get_state()
- Handle unset of tce window if it was never set
Thanks to Narayana Murty N, Ritesh Harjani (IBM), Shivaprasad G Bhat,
and Vaishnavi Bhat.
* tag 'powerpc-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: Don't unset window if it was never set
powerpc/pseries/eeh: Fix get PE state translation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl table constification from Joel Granados:
"All ctl_table declared outside of functions and that remain unmodified
after initialization are const qualified.
This prevents unintended modifications to proc_handler function
pointers by placing them in the .rodata section.
This is a continuation of the tree-wide effort started a few releases
ago with the constification of the ctl_table struct arguments in the
sysctl API done in 78eb4ea25cd5 ("sysctl: treewide: constify the
ctl_table argument of proc_handlers")"
* tag 'constfy-sysctl-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
treewide: const qualify ctl_tables where applicable
|
|
Add ftrace_get_symaddr() for s390, which returns the symbol address
from ftrace's 'ip' parameter.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/173807818869.1854334.15474589105952793986.stgit@devnote2
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Fix to remove ftrace_test_recursion_trylock() from ftrace_graph_func()
because commit d576aec24df9 ("fgraph: Get ftrace recursion lock in
function_graph_enter") has been moved it to function_graph_enter_regs()
already.
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Closes: https://lore.kernel.org/all/Z5O0shrdgeExZ2kF@krava/
Fixes: d576aec24df9 ("fgraph: Get ftrace recursion lock in function_graph_enter")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/173807817692.1854334.2985776940754607459.stgit@devnote2
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a potential early boot crash in SEV-SNP guests, where certain
config and build environment combinations can generate absolute
references to symbols in the early boot code"
* tag 'x86-urgent-2025-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Disable jump tables in SEV startup code
|
|
When retpolines and IBT are both disabled, the compiler is free to use
jump tables to optimize switch instructions. However, these are emitted
by Clang as absolute references into .rodata:
jmp *-0x7dfffe90(,%r9,8)
R_X86_64_32S .rodata+0x170
Given that this code will execute before that address in .rodata has even
been mapped, it is guaranteed to crash a SEV-SNP guest in a way that is
difficult to diagnose.
So disable jump tables when building this code. It would be better if we
could attach this annotation to the __head macro but this appears to be
impossible.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250127114334.1045857-6-ardb+git@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull KVM/arm64 updates from Will Deacon:
"New features:
- Support for non-protected guest in protected mode, achieving near
feature parity with the non-protected mode
- Support for the EL2 timers as part of the ongoing NV support
- Allow control of hardware tracing for nVHE/hVHE
Improvements, fixes and cleanups:
- Massive cleanup of the debug infrastructure, making it a bit less
awkward and definitely easier to maintain. This should pave the way
for further optimisations
- Complete rewrite of pKVM's fixed-feature infrastructure, aligning
it with the rest of KVM and making the code easier to follow
- Large simplification of pKVM's memory protection infrastructure
- Better handling of RES0/RES1 fields for memory-backed system
registers
- Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
from a pretty nasty timer bug
- Small collection of cleanups and low-impact fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
arm64/sysreg: Get rid of TRFCR_ELx SysregFields
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
KVM: arm64: Fix FEAT_MTE in pKVM
Documentation: Update the behaviour of "kvm-arm.mode"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Migrate to the generic rule for built-in DTB
- Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
- Derive timer max_delta from PRCFG1's timer_bits
- Correct the cacheinfo sharing information
- Add pgprot_nx() implementation
- Add debugfs entries to switch SFB/TSO state
- Change the maximum number of watchpoints
- Some bug fixes and other small changes
* tag 'loongarch-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Extend the maximum number of watchpoints
LoongArch: Change 8 to 14 for LOONGARCH_MAX_{BRP,WRP}
LoongArch: Add debugfs entries to switch SFB/TSO state
LoongArch: Fix warnings during S3 suspend
LoongArch: Adjust SETUP_SLEEP and SETUP_WAKEUP
LoongArch: Refactor bug_handler() implementation
LoongArch: Add pgprot_nx() implementation
LoongArch: Correct the __switch_to() prototype in comments
LoongArch: Correct the cacheinfo sharing information
LoongArch: Derive timer max_delta from PRCFG1's timer_bits
LoongArch: Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
LoongArch: Migrate to the generic rule for built-in DTB
|
|
With the switch to GENERIC_CPU_DEVICES an early call to the sclp subsystem
was added to smp_prepare_cpus(). This will usually succeed since the sclp
subsystem is implicitly initialized early enough if an sclp based console
is present.
If no such console is present the initialization happens with an
arch_initcall(); in such cases calls to the sclp subsystem will fail.
For CPU detection this means that the fallback sigp loop will be used
permanently to detect CPUs instead of the preferred READ_CPU_INFO sclp
request.
Fix this by adding an explicit early sclp_init() call via
arch_cpu_finalize_init().
Reported-by: Sheshu Ramanandan <sheshu.ramanandan@ibm.com>
Fixes: 4a39f12e753d ("s390/smp: Switch to GENERIC_CPU_DEVICES")
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
