| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.15-rc1
This contains a patch to remove an unusable key that was erroneously
exposed as well as a fix to support GPUs with a large amount of video
memory on IGX Orin.
Finally, some additional devices, such as a temperature sensor, are
enabled on Jetson TX1, the output voltage of some pins is adjusted and
the VDD_LCD_1V8_DIS power supply now uses the correct enable GPIO.
* tag 'tegra-for-6.15-arm64-dt-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: p2180: Add TMP451 temperature sensor node
arm64: tegra: p2597: Enable TCA9539 as IRQ controllers
arm64: tegra: Define pinmuxing for gpio pads on Tegra210
arm64: tegra: p2597: Fix gpio for vdd-1v8-dis regulator
arm64: tegra: Resize aperture for the IGX PCIe C5 slot
arm64: tegra: Remove the Orin NX/Nano suspend key
Link: https://lore.kernel.org/r/20250307174938.3456275-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
"spi-controller" is not a documented property nor used anywhere, so drop
it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-4-011c423ba99a@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use preferred node names for bus, mmc, and ethernet.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-3-011c423ba99a@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The fixed clocks are not part of "simple-bus", so move them out of the
bus to the top-level. In the process, use the preferred node names of
"clock-<freq>". There's also little reason to have multiple fixed
clocks at the same frequencies, so remove them keeping the labels
to minimize the change.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-2-011c423ba99a@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
AMD Overdrive B1 version is just more peripherals enabled over B0
version. Rework the B1 .dts to use the B0 .dts.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-1-011c423ba99a@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.15 (take two)
- Add GPU support for the RZ/V2H(P) SoC and the RZ/V2H EVK board.
* tag 'renesas-dts-for-v6.15-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable Mali-G31
arm64: dts: renesas: r9a09g057: Add Mali-G31 GPU node
Link: https://lore.kernel.org/r/cover.1741362039.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable HOTPLUG_SMT for SMT control.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250311075143.61078-5-yangyicong@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
For ACPI we'll build the topology from PPTT and we cannot directly
get the SMT number of each core. Instead using a temporary xarray
to record the heterogeneous information (from ACPI_PPTT_ACPI_IDENTICAL)
and SMT information of the first core in its heterogeneous CPU cluster
when building the topology. Then we can know the largest SMT number
in the system. If a homogeneous system's using ACPI 6.2 or later,
all the CPUs should be under the root node of PPTT. There'll be
only one entry in the xarray and all the CPUs in the system will
be assumed identical.
The framework's SMT control provides two interface to the users [1]
through /sys/devices/system/cpu/smt/control
(Documentation/ABI/testing/sysfs-devices-system-cpu):
1) enable SMT by writing "on" and disable by "off"
2) enable SMT by writing max_thread_number or disable by writing 1
Both method support to completely disable/enable the SMT cores so both
work correctly for symmetric SMT platform and asymmetric platform with
non-SMT and one type SMT cores like:
core A: 1 thread
core B: X (X!=1) threads
Note that for a theoretically possible multiple SMT-X (X>1) core
platform the SMT control is also supported as expected but only
by writing the "on/off" method.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250311075143.61078-4-yangyicong@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently if architectures want to support HOTPLUG_SMT they need to
provide a topology_is_primary_thread() telling the framework which
thread in the SMT cannot offline. However arm64 doesn't have a
restriction on which thread in the SMT cannot offline, a simplest
choice is that just make 1st thread as the "primary" thread. So
just make this as the default implementation in the framework and
let architectures like x86 that have special primary thread to
override this function (which they've already done).
There's no need to provide a stub function if !CONFIG_SMP or
!CONFIG_HOTPLUG_SMT. In such case the testing CPU is already
the 1st CPU in the SMT so it's always the primary thread.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250311075143.61078-2-yangyicong@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Chips in the DA850 family need to have ARCH_DAVINCI_DA8XX to be selected
in order to enable some peripheral drivers.
This was accidentally removed in a previous commit.
Fixes: dec85a95167a ("ARM: davinci: clean up platform support")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v6.14
- Fix possible misalignment breaking SMP bring-up.
* tag 'renesas-fixes-for-v6.14-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: smp: Enforce shmobile_smp_* alignment
Link: https://lore.kernel.org/r/cover.1741785482.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Address bytes shifted with a single 64 bit page table entry (any page table
level) has been always hard coded as 3 (aka 2^3 = 8). Although intuitive it
is not very readable or easy to reason about. Besides it is going to change
with D128, where each 128 bit page table entry will shift address bytes by
4 (aka 2^4 = 16) instead.
Let's just formalise this address bytes shift value into a new macro called
PTDESC_ORDER establishing a logical abstraction, thus improving readability
as well. While here re-organize EARLY_LEVEL macro along with its dependents
for better clarity. This does not cause any functional change. Also replace
all (PAGE_SHIFT - PTDESC_ORDER) instances with PTDESC_TABLE_SHIFT.
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: kasan-dev@googlegroups.com
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250311045710.550625-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 Devicetree fixes for v6.14
Revert the change to marking SDM845 SMMU dma-coherent, as this is
reported not to be true.
* tag 'qcom-arm64-fixes-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
Revert "arm64: dts: qcom: sdm845: Affirm IDR0.CCTW on apps_smmu"
Link: https://lore.kernel.org/r/20250310191409.1208520-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The WCD938x codec provides two controls for each of the MIC_BIASn outputs:
- "MIC BIASn" enables an internal regulator to generate the output
with a configurable voltage (qcom,micbiasN-microvolt).
- "VA MIC BIASn" enables "pull-up mode" that bypasses the internal
regulator and directly outputs fixed 1.8V from the VDD_PX pin.
This is intended for low-power VA (voice activation) use cases.
The audio-routing setup for the X1E80100 CRD currently specifies both
as power supplies for the DMICs, but only one of them can be active
at the same time. In practice, only the internal regulator is used
with the current setup because the driver prefers it over pull-up mode.
Make this more clear by dropping the redundant routes to the pull-up
"VA MIC BIASn" supply. There is no functional difference except that we
skip briefly switching to pull-up mode when shutting down the microphone.
Fixes: 4442a67eedc1 ("arm64: dts: qcom: x1e80100-crd: add sound card")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20241203-x1e80100-va-mic-bias-v1-2-0dfd4d9b492c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The WCD938x codec provides two controls for each of the MIC_BIASn outputs:
- "MIC BIASn" enables an internal regulator to generate the output
with a configurable voltage (qcom,micbiasN-microvolt).
- "VA MIC BIASn" enables "pull-up mode" that bypasses the internal
regulator and directly outputs fixed 1.8V from the VDD_PX pin.
This is intended for low-power VA (voice activation) use cases.
The audio-routing setup for the ThinkPad X13s currently specifies both
as power supplies for the DMICs, but only one of them can be active
at the same time. In practice, only the internal regulator is used
with the current setup because the driver prefers it over pull-up mode.
Make this more clear by dropping the redundant routes to the pull-up
"VA MIC BIASn" supply. There is no functional difference except that we
skip briefly switching to pull-up mode when shutting down the microphone.
Fixes: 2e498f35c385 ("arm64: dts: qcom: sc8280xp-x13s: fix va dmic dai links and routing")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20241203-x1e80100-va-mic-bias-v1-1-0dfd4d9b492c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since the Lenovo Thinkpad T14s Gen6 is available with an OLED, add
dedicated a dedicated dts for it.
This is needed because the backlight is handled differently for OLED
panels when compared to LCD ones.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250314140325.4143779-4-abel.vesa@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Due to the fact that Lenovo Thinkpad T14s Gen6 is available with both
OLED and LCD, the backlight control differs HW-wise. For the LCD variant,
the panel's backlight is controlled via one of the PWMs provided by the
PMK8550 PMIC. For the OLED variant, the backlight is internal to the
panel and therefore it is not described in devicetree.
For this reason, create a generic dtsi for the T14s by renaming the
existing dts. While at it, add a node name to panel and drop the enable
gpio and pinctrl properties from the panel node. Then add the LCD variant
dts file with the old name and describe all backlight related nodes.
So the existing dts will now be used for LCD variant while for OLED new
dts will be added.
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250314140325.4143779-3-abel.vesa@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a node for the GT9897 touchscreen found on this smartphone connected
via SPI.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250312-fp5-touchscreen-v2-1-4bed270e0065@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Correct the clocks property for the uart14 node to fix UART functionality
on QUP2_SE6. The current failure is due to an incorrect clocks assignment.
Change the clocks property to GCC_QUPV3_WRAP2_S6_CLK to resolve the issue.
Signed-off-by: Jyothi Kumar Seerapu <quic_jseerapu@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 068c3d3c83be ("arm64: dts: qcom: Add base SM8750 dtsi")
Link: https://lore.kernel.org/r/20250312104358.2558-1-quic_jseerapu@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Specify orientation GPIO to the PMIC GLINK node.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250312100544.1510190-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In IPQ5424, the bootloader collects the system RAM contents upon a crash
for post-morterm analysis. If we don't reserve the memory region used by
the bootloader, linux will consume it. Upon the next boot after a crash,
the bootloader will be loaded in the same region, which could lead to the
loss of some data. sometimes, we may miss out critical information.
Therefore, let's reserve the region used by the bootloader.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250312094948.3376126-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the device node for gfx smmu that is required for gpu
specific address translations.
Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com>
Link: https://lore.kernel.org/r/20250310-b4-branch-gfx-smmu-v6-2-15c60b8abd99@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable secondary USB controller on QCS8300 Ride platform. Since it is a
Type-A port, the dr_mode has been set to "host". The VBUS to connected
peripherals is provided by TPS2559QWDRCTQ1 regulator connected to the
port. The regulator has an enable pin controlled by PMM8650. Model it as
fixed regulator and keep it Always-On at boot, since the regulator is
GPIO controlled regulator.
Co-developed-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Signed-off-by: Manish Nagar <quic_mnagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250310104743.976265-1-quic_mnagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
There is a typo in cpu7_opp9. Fix it to get rid of the following
errors.
[ 0.198043] cpu cpu7: Voltage update failed freq=1747200
[ 0.198052] cpu cpu7: failed to update OPP for freq=1747200
Fixes: 8e0e8016cb79 ("arm64: dts: qcom: sm8250: Add CPU opp tables")
Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250308-fix-sm8250-cpufreq-v1-1-8a0226721399@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a gpio-keys label for the lid-switch for consistency and to separate
it from the volume-up key (e.g. in /proc/interrupts).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250307171222.7470-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for the keypad volume-up key on the debug extension board.
This is useful to have when testing PMIC interrupt handling, and the key
can also be used to wake up from deep suspend states (CX shutdown).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250307171222.7470-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The preemptively-merged node contains a property absent from the final
bindings. Remove it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 019e1ee32fec ("arm64: dts: qcom: x1e001de-devkit: Enable external DP support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-11-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The preemptively-merged node contains a property absent from the final
bindings. Remove it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: b16ee3d0cda4 ("arm64: dts: qcom: x1e80100-romulus: Set up PS8830s")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-10-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The preemptively-merged node contains a property absent from the final
bindings. Remove it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: bd2dbbb1f35a ("arm64: dts: qcom: x1e80100-dell-xps13-9345: Introduce retimer support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-9-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The node is currently named power-controller, which requires the device
underneath is a power domain provider. Rename it to align with other
SoCs and resolve this sort of warnings:
power-controller@c310000: '#power-domain-cells' is a required property
Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-8-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The node is currently named power-controller, which requires the device
underneath is a power domain provider. Rename it to align with other
SoCs and resolve this sort of warnings:
power-controller@c300000: '#power-domain-cells' is a required property
Fixes: 0775021783b5 ("arm64: dts: qcom: qcs615: add AOSS_QMP node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-7-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The node is currently named power-controller, which requires the device
underneath is a power domain provider. Rename it to align with other
SoCs and resolve this sort of warnings:
power-controller@c310000: '#power-domain-cells' is a required property
Fixes: 91f767eb6938 ("arm64: dts: qcom: sdx75: Add AOSS node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-6-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit 53c6d854be4e ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding")
reworked the dt-bindings to accurately represent the hardware.
Execute the second half of the cleanup by wiring up the missing
pwr_event IRQ and adjusting the entry order.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-5-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Remove eMMC node for rdp433, since rdp433
default boot mode is norplusnand
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://lore.kernel.org/r/20250306113357.126602-4-quic_mdalam@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable SPI NAND support for ipq9574 SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://lore.kernel.org/r/20250306113357.126602-3-quic_mdalam@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add SPI NAND support for ipq9574 SoC.
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://lore.kernel.org/r/20250306113357.126602-2-quic_mdalam@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
A number of emmc fixes (removing CQE from Theobroma boards and slower
freq on Rock-5-ITX) as well as some pinmux fixes and missing supplies.
* tag 'v6.14-rockchip-dtsfixes2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: slow down emmc freq for rock 5 itx
arm64: dts: rockchip: Add missing PCIe supplies to RockPro64 board dtsi
arm64: dts: rockchip: Add avdd HDMI supplies to RockPro64 board dtsi
arm64: dts: rockchip: Remove undocumented sdmmc property from lubancat-1
arm64: dts: rockchip: fix pinmux of UART5 for PX30 Ringneck on Haikou
arm64: dts: rockchip: fix pinmux of UART0 for PX30 Ringneck on Haikou
arm64: dts: rockchip: fix u2phy1_host status for NanoPi R4S
arm64: dts: rockchip: remove supports-cqe from rk3588 tiger
arm64: dts: rockchip: remove supports-cqe from rk3588 jaguar
Link: https://lore.kernel.org/r/1990830.tdWV9SEqCh@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.14, please pull the following:
- Chester fixes the switch port assignments on the ASUS RT-AC3200 and
RT-AC5300 routers
- Phil removes a Device Tree property flagging the BCM2711 ARM timers as
not being configured which would have prevented the use of vDSO on the
Pi 4 running a 32-bit kernel
* tag 'arm-soc/for-6.14/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC3200
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC5300
ARM: dts: bcm2711: Don't mark timer regs unconfigured
Link: https://lore.kernel.org/r/20250308150528.1900822-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Holding the pte lock for the page that is being converted to secure is
needed to avoid races. A previous commit removed the locking, which
caused issues. Fix by locking the pte again.
Fixes: 5cbe24350b7d ("KVM: s390: move pv gmap functions into kvm")
Reported-by: David Hildenbrand <david@redhat.com>
Tested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[david@redhat.com: replace use of get_locked_pte() with folio_walk_start()]
Link: https://lore.kernel.org/r/20250312184912.269414-2-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250312184912.269414-2-imbrenda@linux.ibm.com>
|
|
Remove the remaining parts of the 50633, the core, headers and glue.
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")
See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-10-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")
See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250311014959.743322-4-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")
See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-2-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There are some failure modes which lead to triple-faults in the
relocate_kernel() function, which is fairly much undebuggable
for normal mortals.
Adding a GDT in the relocate_kernel() environment is step 1 towards
being able to catch faults and do something more useful.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250312144257.2348250-2-dwmw2@infradead.org
|
|
Count the pages used by pKVM for the guest stage-2 in memory stats under
secondary pagetable, similarly to what the VHE mode does.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250313114038.1502357-4-vdonnefort@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In order to account for memory dedicated to the stage-2 page-tables, use
a separated memcache when tearing down the VM. Meanwhile rename
reclaim_guest_pages to reflect the fact it only reclaim page-table
pages.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250313114038.1502357-3-vdonnefort@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add flags to kvm_hyp_memcache and propagate the latter to the allocation
and free callbacks. This will later allow to account for memory, based
on the memcache configuration.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250313114038.1502357-2-vdonnefort@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add support for the Xiaomi Redmi Note 8 based on the SM6125 SoC.
Defined features:
- dmesg output to bootloader preconfigured display
- USB
- eMMC
- SD card
- SMD RPM regulators
- Volume Up, Down and Power buttons
Signed-off-by: Gabriel Gonzales <semfault@disroot.org>
Link: https://lore.kernel.org/r/20250311003353.8250-3-semfault@disroot.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Decoder and encoder nodes are already deprecated from bindings. Update
the venus node to align with bindings. The nodes were deprecated with
commit 459997e8990d9 ("media: dt-bindings: qcom-venus: Deprecate
video-decoder and video-encoder where applicable") and is part of
v6.14-rc1 and onwards.
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250303-b4-media-v2-1-893651a4b1c7@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add CTCU and ETR nodes in DT to enable related functionalities.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-11-quic_jiegan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Audio DSP supports compressed playback on this SoC. It is required
to add compressed DAI and separate MultimeMedia DAI link to enable this.
Fcplay or cplay tools from tinycompress can playback, say, mp3 files:
fcplay -c 0 -d 3 test.mp3
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lore.kernel.org/r/20250228162308.388818-1-alexey.klimov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
