| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- The series "mm: fixes for fallouts from mem_init() cleanup" from Mike
Rapoport fixes a couple of issues with the just-merged "arch, mm:
reduce code duplication in mem_init()" series
- The series "MAINTAINERS: add my isub-entries to MM part." from Mike
Rapoport does some maintenance on MAINTAINERS
- The series "remove tlb_remove_page_ptdesc()" from Qi Zheng does some
cleanup work to the page mapping code
- The series "mseal system mappings" from Jeff Xu permits sealing of
"system mappings", such as vdso, vvar, vvar_vclock, vectors (arm
compat-mode), sigpage (arm compat-mode)
- Plus the usual shower of singleton patches
* tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mseal sysmap: add arch-support txt
mseal sysmap: enable s390
selftest: test system mappings are sealed
mseal sysmap: update mseal.rst
mseal sysmap: uprobe mapping
mseal sysmap: enable arm64
mseal sysmap: enable x86-64
mseal sysmap: generic vdso vvar mapping
selftests: x86: test_mremap_vdso: skip if vdso is msealed
mseal sysmap: kernel config and header change
mm: pgtable: remove tlb_remove_page_ptdesc()
x86: pgtable: convert to use tlb_remove_ptdesc()
riscv: pgtable: unconditionally use tlb_remove_ptdesc()
mm: pgtable: convert some architectures to use tlb_remove_ptdesc()
mm: pgtable: change pt parameter of tlb_remove_ptdesc() to struct ptdesc*
mm: pgtable: make generic tlb_remove_table() use struct ptdesc
microblaze/mm: put mm_cmdline_setup() in .init.text section
mm/memory_hotplug: fix call folio_test_large with tail page in do_migrate_range
MAINTAINERS: mm: add entry for secretmem
MAINTAINERS: mm: add entry for numa memblocks and numa emulation
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next
riscv patches for 6.15-rc1, part 2
* A bunch of fixes:
- 2 fixes in the purgatory code which prevented kexec to work
- Workaround an issue with gcc-15
* tag 'riscv-mw2-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux:
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
RISC-V: add vector extension validation checks
|
|
Current minimum required version of binutils is 2.25,
which supports MONITOR and MWAIT instruction mnemonics.
Replace the byte-wise specification of MONITOR and
MWAIT with these proper mnemonics.
No functional change intended.
Note: LLVM assembler is not able to assemble correct forms of MONITOR
and MWAIT instructions with explicit operands and reports:
error: invalid operand for instruction
monitor %rax,%ecx,%edx
^~~~
# https://lore.kernel.org/oe-kbuild-all/202504030802.2lEVBSpN-lkp@intel.com/
Use instruction mnemonics with implicit operands to
work around this issue.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250403125111.429805-1-ubizjak@gmail.com
|
|
All functions in mwait_idle_with_hints() cast eax and ecx arguments
to u32. Propagate argument type to the enclosing function.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250403073105.245987-1-ubizjak@gmail.com
|
|
Have it return the two things it does return:
- a new ASID and
- the need to flush the TLB or not,
in a struct which fits in a single 32-bit register and whack the IO
parameters.
Beyond being easier to read, this also helps the compiler generate
better, more compact code:
# arch/x86/mm/tlb.o:
text data bss dec hex filename
9341 753 516 10610 2972 tlb.o.before
9213 753 516 10482 28f2 tlb.o.after
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250403085623.20824-1-bp@kernel.org
|
|
There is not much point in CONFIG_AS_TPAUSE at all when the emitted
assembly is always the same - it only obfuscates the __tpause() code
in essence.
Remove the TPAUSE insn mnemonic from __tpause() and leave only
the equivalent byte-wise definition. This can then be changed
back to insn mnemonic once binutils 2.31.1 is the minimum version
to build the kernel. (Right now it's 2.25.)
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402180827.3762-4-ubizjak@gmail.com
|
|
Delimiters in asm() templates such as ';', '\t' or '\n' are not
required syntactically, they were used historically in the Linux
kernel to prettify the compiler's .s output for people who were
looking at compiler generated .s output.
Most x86 developers these days are primarily looking at:
1) objdump --disassemble-all .o
2) perf top's live kernel function annotation and disassembler
feature that uses /dev/mem.
... because:
- this kind of assembler output is standardized regardless of
compiler used,
- it's generally less messy looking,
- it gives ground-truth instead of being some intermediate layer
in the toolchain that might or might not be the real deal,
- and on a live kernel it also sees through the kernel's various
layers of runtime patching code obfuscation facilities, also
known as: alternative-instructions, tracepoints and jump labels.
There are some cases where the .s output is the most useful
tool, such as alternatives() code generation, but other than
that these delimiters used in simple asm() statements mostly
add noise to the source code side, which isn't desirable for
assembly code that is fragile enough already.
Remove the delimiters for <asm/mwait.h>, which also happens to
make the GCC inliner's asm() instruction length heuristics
more accurate...
[ mingo: Wrote a new changelog to give historic context and
to give people a chance to object. :-) ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402180827.3762-3-ubizjak@gmail.com
|
|
Don't re-walk the page tables if an SEA occurred during the faulting
page table walk to avoid taking a fatal exception in the hyp.
Additionally, check that FAR_EL2 is valid for SEAs not taken on PTW
as the architecture doesn't guarantee it contains the fault VA.
Finally, fix up the rest of the abort path by checking for SEAs early
and bugging the VM if we get further along with an UNKNOWN fault IPA.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250402201725.2963645-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Switch over to the typical sysreg table for HPFAR_EL2 as we're about to
start using more fields in the register.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250402201725.2963645-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM's logic for deciding when HPFAR_EL2 is UNKNOWN doesn't align with
the architecture. Most notably, KVM assumes HPFAR_EL2 contains the
faulting IPA even in the case of an SEA.
Align the logic with the architecture rather than attempting to
paraphrase it. Additionally, take the opportunity to improve the
language around ARM erratum #834220 such that it actually describes the
bug.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250402201725.2963645-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling:
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors:
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and
remove gotos for error handling.
- Some followup patches to support dirty shutdown accounting:
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands.
Mostly in preparation for CXL EDAC code to utilize the Features
commands. It's also in preparation for CXL fwctl support to utilize
the CXL Features. The commands include "Get Supported Features", "Get
Feature", and "Set Feature".
- A series to support extended linear cache support described by the
ACPI HMAT table.
The addition helps enumerate the cache and also provides additional
RAS reporting support for configuration with extended linear cache.
(and related fixes for the series).
- An update to cxl_test to support a 3-way capable CFMWS
- A documentation fix to remove unused "mixed mode"
* tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (39 commits)
cxl/region: Fix the first aliased address miscalculation
cxl/region: Quiet some dev_warn()s in extended linear cache setup
cxl/Documentation: Remove 'mixed' from sysfs mode doc
cxl: Fix warning from emitting resource_size_t as long long int on 32bit systems
cxl/test: Define a CFMWS capable of a 3 way HB interleave
cxl/mem: Do not return error if CONFIG_CXL_MCE unset
tools/testing/cxl: Set Shutdown State support
cxl/pmem: Export dirty shutdown count via sysfs
cxl/pmem: Rename cxl_dirty_shutdown_state()
cxl/pci: Introduce cxl_gpf_get_dvsec()
cxl/pci: Support Global Persistent Flush (GPF)
cxl: Document missing sysfs files
cxl: Plug typos in ABI doc
cxl/pmem: debug invalid serial number data
cxl/cdat: Remove redundant gp_port initialization
cxl/memdev: Remove unused partition values
cxl/region: Drop goto pattern of construct_region()
cxl/region: Drop goto pattern in cxl_dax_region_alloc()
cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc()
cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning
serial: stm32: do not deassert RS485 RTS GPIO prematurely
serial: 8250: add driver for NI UARTs
dt-bindings: serial: snps-dw-apb-uart: document RZ/N1 binding without DMA
serial: icom: fix code format problems
serial: sh-sci: Save and restore more registers
tty: serial: pl011: remove incorrect of_match_ptr annotation
dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
tty: serial: lpuart: only disable CTS instead of overwriting the whole UARTMODIR register
tty: caif: removed unused function debugfs_tx()
serial: 8250_dma: terminate correct DMA in tx_dma_flush()
tty: serial: fsl_lpuart: rename register variables more specifically
tty: serial: fsl_lpuart: use port struct directly to simply code
tty: serial: fsl_lpuart: Use u32 and u8 for register variables
tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
tty: serial: 8250: Add Brainboxes XC devices
dt-bindings: serial: fsl-lpuart: support i.MX94
tty: serial: 8250: Add some more device IDs
dt-bindings: serial: samsung: add exynos7870-uart compatible
serial: 8250_dw: Comment possible corner cases in serial_out() implementation
...
|
|
instruction wrappers on 'u32'
MONITOR and MONITORX expect 32-bit unsigned integer arguments in the %ecx
and %edx registers. MWAIT and MWAITX expect 32-bit usigned int
argument in %eax and %ecx registers.
Some of the helpers around these instructions in <asm/mwait.h> are using
too wide types (long), standardize on u32 instead that makes it clear that
this is a hardware ABI.
[ mingo: Cleaned up the changelog. ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402180827.3762-1-ubizjak@gmail.com
|
|
mwait_idle_with_hints() and prefer_mwait_c1_over_halt()
The following commit, 12 years ago:
7e98b7192046 ("x86, idle: Use static_cpu_has() for CLFLUSH workaround, add barriers")
added barriers around the CLFLUSH in mwait_idle_with_hints(), justified with:
... and add memory barriers around it since the documentation is explicit
that CLFLUSH is only ordered with respect to MFENCE.
This also triggered, 11 years ago, the same adjustment in:
f8e617f45829 ("sched/idle/x86: Optimize unnecessary mwait_idle() resched IPIs")
during development, although it failed to get the static_cpu_has_bug() treatment.
X86_BUG_CLFLUSH_MONITOR (a.k.a the AAI65 errata) is specific to Intel CPUs,
and the SDM currently states:
Executions of the CLFLUSH instruction are ordered with respect to each
other and with respect to writes, locked read-modify-write instructions,
and fence instructions[1].
With footnote 1 reading:
Earlier versions of this manual specified that executions of the CLFLUSH
instruction were ordered only by the MFENCE instruction. All processors
implementing the CLFLUSH instruction also order it relative to the other
operations enumerated above.
i.e. The SDM was incorrect at the time, and barriers should not have been
inserted. Double checking the original AAI65 errata (not available from
intel.com any more) shows no mention of barriers either.
Note: If this were a general codepath, the MFENCEs would be needed, because
AMD CPUs of the same vintage do sport otherwise-unordered CLFLUSHs.
Remove the unnecessary barriers. Furthermore, use a plain alternative(),
rather than static_cpu_has_bug() and/or no optimisation. The workaround
is a single instruction.
Use an explicit %rax pointer rather than a general memory operand, because
MONITOR takes the pointer implicitly in the same way.
[ mingo: Cleaned up the commit a bit. ]
Fixes: 7e98b7192046 ("x86, idle: Use static_cpu_has() for CLFLUSH workaround, add barriers")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250402172458.1378112-1-andrew.cooper3@citrix.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Remove the IBM CAPI (cxl) driver
Thanks to Andrew Donnellan.
* tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
docs: Fix references to IBM CAPI (cxl) removal version
cxl: Remove driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Johannes Berg:
- proper nofault accesses and read-only rodata
- hostfs fix for host inode number reuse
- fixes for host errno handling
- various cleanups/small fixes
* tag 'uml-for-linux-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Rewrite the sigio workaround based on epoll and tgkill
um: Prohibit the VM_CLONE flag in run_helper_thread()
um: Switch to the pthread-based helper in sigio workaround
um: ubd: Switch to the pthread-based helper
um: Add pthread-based helper support
um: x86: clean up elf specific definitions
um: Store full CSGSFS and SS register from mcontext
um: virt-pci: Refactor virtio_pcidev into its own module
um: work around sched_yield not yielding in time-travel mode
um/locking: Remove semicolon from "lock" prefix
um: Update min_low_pfn to match changes in uml_reserved
um: use str_yes_no() to remove hardcoded "yes" and "no"
um: hostfs: avoid issues on inode number reuse by host
um: Allocate vdso page pointer statically
um: remove copy_from_kernel_nofault_allowed
um: mark rodata read-only and implement _nofault accesses
um: Pass the correct Rust target and options with gcc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Always select HAVE_VIRT_CPU_ACCOUNTING_GEN
- Enable UBSAN (Undefined Behavior Sanitizer)
- Increase MAX_IO_PICS up to 8
- Increase ARCH_DMA_MINALIGN up to 16
- Fix and improve BPF JIT
- Fix and improve vDSO implementation
- Update the default config file
- Some bug fixes and other small changes
* tag 'loongarch-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: vDSO: Make use of the t8 register for vgetrandom-chacha
LoongArch: vDSO: Remove --hash-style=sysv
LoongArch: BPF: Don't override subprog's return value
LoongArch: BPF: Use move_addr() for BPF_PSEUDO_FUNC
LoongArch: BPF: Fix off-by-one error in build_prologue()
LoongArch: Rework the arch_kgdb_breakpoint() implementation
LoongArch: Fix device node refcount leak in fdt_cpu_clk_init()
LoongArch: Increase ARCH_DMA_MINALIGN up to 16
LoongArch: Increase MAX_IO_PICS up to 8
LoongArch: Fix help text of CMDLINE_EXTEND in Kconfig
LoongArch: Enable UBSAN (Undefined Behavior Sanitizer)
LoongArch: Always select HAVE_VIRT_CPU_ACCOUNTING_GEN
rust: Fix enabling Rust and building with GCC for LoongArch
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"Avoid direct HLT instruction execution in TDX guests.
TDX guests aren't expected to use the HLT instruction directly. It
causes a virtualization exception (#VE). While the #VE _can_ be
handled, the current handling is slow and buggy and the easiest thing
is just to avoid HLT in the first place. Plus, the kernel already has
paravirt infrastructure that makes it relatively painless.
Make TDX guests require paravirt and add some TDX-specific paravirt
handlers which avoid HLT in the normal halt routines. Also add a
warning in case another HLT sneaks in.
There was a report that this leads to a "major performance
improvement" on specjbb2015, probably because of the extra #VE
overhead or missed wakeups from the buggy HLT handling"
* tag 'x86_tdx_for_6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Emit warning if IRQs are enabled during HLT #VE handling
x86/tdx: Fix arch_safe_halt() execution for TDX VMs
x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
|
|
This merges in the removal of the IBM CAPI "cxl" driver.
|
|
Provide support for CONFIG_MSEAL_SYSTEM_MAPPINGS on s390, covering the
vdso.
[hca@linux.ibm.com: update supported architectures]
Link: https://lkml.kernel.org/r/20250317131917.1332402-1-hca@linux.ibm.com
Link: https://lkml.kernel.org/r/20250311123326.2686682-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Provide support for CONFIG_MSEAL_SYSTEM_MAPPINGS on arm64, covering the
vdso, vvar, and compat-mode vectors and sigpage mappings.
Production release testing passes on Android and Chrome OS.
Link: https://lkml.kernel.org/r/20250305021711.3867874-5-jeffxu@google.com
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Benjamin Berg <benjamin@sipsolutions.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Elliot Hughes <enh@google.com>
Cc: Florian Faineli <f.fainelli@gmail.com>
Cc: Greg Ungerer <gerg@kernel.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport <mike.rapoport@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Provide support for CONFIG_MSEAL_SYSTEM_MAPPINGS on x86-64, covering the
vdso, vvar, vvar_vclock.
Production release testing passes on Android and Chrome OS.
Link: https://lkml.kernel.org/r/20250305021711.3867874-4-jeffxu@google.com
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Benjamin Berg <benjamin@sipsolutions.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Elliot Hughes <enh@google.com>
Cc: Florian Faineli <f.fainelli@gmail.com>
Cc: Greg Ungerer <gerg@kernel.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport <mike.rapoport@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The x86 has already been converted to use struct ptdesc, so convert it to
use tlb_remove_ptdesc() instead of tlb_remove_table().
Link: https://lkml.kernel.org/r/36ad56b7e06fa4b17fb23c4fc650e8e0d72bb3cd.1740454179.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To support fast gup, the commit 69be3fb111e7 ("riscv: enable
MMU_GATHER_RCU_TABLE_FREE for SMP && MMU") did the following:
1) use tlb_remove_page_ptdesc() for those platforms which use IPI to
perform TLB shootdown
2) use tlb_remove_ptdesc() for those platforms which use SBI to perform
TLB shootdown
The tlb_remove_page_ptdesc() is the wrapper of the tlb_remove_page(). By
design, the tlb_remove_page() should be used to remove a normal page from
a page table entry, and should not be used for page table pages.
The tlb_remove_ptdesc() is the wrapper of the tlb_remove_table(), which is
designed specifically for freeing page table pages. If the
CONFIG_MMU_GATHER_TABLE_FREE is enabled, the tlb_remove_table() will use
semi RCU to free page table pages, that is:
- batch table freeing: asynchronous free by RCU
- single table freeing: IPI + synchronous free
If the CONFIG_MMU_GATHER_TABLE_FREE is disabled, the tlb_remove_table()
will fall back to pagetable_dtor() + tlb_remove_page().
For case 1), since we need to perform TLB shootdown before freeing the
page table page, the local_irq_save() in fast gup can block the freeing
and protect the fast gup page walker. Therefore we can ensure safety by
just using tlb_remove_page_ptdesc(). In addition, we can also the
tlb_remove_ptdesc()/tlb_remove_table() to achieve it, and it doesn't
matter whether CONFIG_MMU_GATHER_RCU_TABLE_FREE is selected. And in
theory, the performance of freeing pages asynchronously via RCU will not
be lower than synchronous free.
For case 2), since local_irq_save() only disable S-privilege IPI irq but
not M-privilege's, which is used by the SBI implementation to perform TLB
shootdown, so we must select CONFIG_MMU_GATHER_RCU_TABLE_FREE and use
tlb_remove_ptdesc() to ensure safety. The riscv selects this config for
SMP && MMU, the CONFIG_RISCV_SBI is dependent on MMU. Therefore, only the
UP system may have the situation where CONFIG_MMU_GATHER_RCU_TABLE_FREE is
disabled but CONFIG_RISCV_SBI is enabled. But there is no freeing vs fast
gup race in the UP system.
So, in summary, we can use tlb_remove_ptdesc() to support fast gup in all
cases, and this interface is specifically designed for page table pages.
So let's use it unconditionally.
Link: https://lkml.kernel.org/r/9025595e895515515c95e48db54b29afa489c41d.1740454179.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now, the nine architectures of csky, hexagon, loongarch, m68k, mips,
nios2, openrisc, sh and um do not select CONFIG_MMU_GATHER_RCU_TABLE_FREE,
and just call pagetable_dtor() + tlb_remove_page_ptdesc() (the wrapper of
tlb_remove_page()). This is the same as the implementation of
tlb_remove_{ptdesc|table}() under !CONFIG_MMU_GATHER_TABLE_FREE, so
convert these architectures to use tlb_remove_ptdesc().
The ultimate goal is to make the architecture only use tlb_remove_ptdesc()
or tlb_remove_table() for page table pages.
[zhengqi.arch@bytedance.com: v2]
Link: https://lkml.kernel.org/r/20250303072603.45423-1-zhengqi.arch@bytedance.com
[akpm@linux-foundation.org: remove trailing semi in arch/loongarch/include/asm/pgalloc.h]
Link: https://lkml.kernel.org/r/19db3e8673b67bad2f1df1ab37f1c89d99eacfea.1740454179.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As reported by lkp, there is a section mismatch of mm_cmdline_setup() and
memblock. The reason is we don't specify the section of
mm_cmdline_setup() and gcc put it into .text.unlikely.
As mm_cmdline_setup() is only used in mmu_init(), which is in .init.text
section, put mm_cmdline_setup() into it too.
Link: https://lkml.kernel.org/r/20250328010136.13139-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503241259.kJV3U7Xj-lkp@intel.com/
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The prefetchw() dates back decades and the fundamental notion of doing
something like this on a lock is shady.
Moreover, for a few years now in the fast path faults are handled with RCU
+ per-vma locking, hopefully not even looking at the lock to begin with.
As such just remove it.
I did not see a point benchmarking this. Given that it is not expected
to be looked at by default justifies not doing the prefetch.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250401143520.1113572-1-mjguzik@gmail.com
|
|
The functions return bool, simplify the checks.
[ mingo: Split off from two other patches. ]
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250331081327.256412-6-bhe@redhat.com
|
|
P4D huge pages are not supported yet, let's use the generic definition
in <linux/pgtable.h>.
[ mingo: Cleaned up the changelog. ]
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Link: https://lore.kernel.org/r/20250331081327.256412-7-bhe@redhat.com
|
|
PGD huge pages are not supported yet, let's use the generic definition
in <linux/pgtable.h>.
[ mingo: Cleaned up the changelog. ]
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Link: https://lore.kernel.org/r/20250331081327.256412-6-bhe@redhat.com
|
|
Upon a wakeup from S4, the restore kernel starts and initializes the
FRED MSRs as needed from its perspective. It then loads a hibernation
image, including the image kernel, and attempts to load image pages
directly into their original page frames used before hibernation unless
those frames are currently in use. Once all pages are moved to their
original locations, it jumps to a "trampoline" page in the image kernel.
At this point, the image kernel takes control, but the FRED MSRs still
contain values set by the restore kernel, which may differ from those
set by the image kernel before hibernation. Therefore, the image kernel
must ensure the FRED MSRs have the same values as before hibernation.
Since these values depend only on the location of the kernel text and
data, they can be recomputed from scratch.
Reported-by: Xi Pardee <xi.pardee@intel.com>
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250401075728.3626147-1-xin@zytor.com
|
|
Convert the last remaining printk() in nmi.c to pr_info(). Along with
it, use timespec macros to calculate the NMI handler duration.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-10-sohil.mehta@intel.com
|
|
The expected_testcase_failures variable in the NMI selftest has never
been set since its introduction. Remove this unused variable along with
the related checks to simplify the code.
While at it, replace printk() with the corresponding pr_{cont,info}()
calls. Also, get rid of the superfluous testname wrapper and the
redundant file path comment.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-9-sohil.mehta@intel.com
|
|
<asm/x86_init.h>
[ mingo: Split off from another patch. ]
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-8-sohil.mehta@intel.com
|
|
NMI handlers can be registered by various subsystems, including drivers.
However, the interface for registering and unregistering such handlers
is not clearly documented. In the future, the interface may need to be
extended to identify the source of the NMI.
Add documentation to make the current API more understandable and easier
to use.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-8-sohil.mehta@intel.com
|
|
Some of the comments in the default NMI handling code are out of place
or inadequate. Move them to the appropriate locations and update them as
needed.
Move the comment related to CPU-specific NMIs closer to the actual code.
Also, add more details about how back-to-back NMIs are detected since
that isn't immediately obvious.
Opportunistically, replace an #ifdef section in the vicinity with an
IS_ENABLED() check to make the code easier to read.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Kai Huang <kai.huang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-7-sohil.mehta@intel.com
|
|
The comment in unknown_nmi_error() is incorrect and misleading. There
is no longer a restriction on having a single Unknown NMI handler. Also,
nmi_handle() never used the 'b2b' parameter.
The commits that made the comment outdated are:
0d443b70cc92 ("x86/platform: Remove warning message for duplicate NMI handlers")
bf9f2ee28d47 ("x86/nmi: Remove the 'b2b' parameter from nmi_handle()")
Remove the old comment and update it to reflect the current logic.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-6-sohil.mehta@intel.com
|
|
Commit:
feb6cd6a0f9f ("thermal/intel_powerclamp: stop sched tick in forced idle")
got rid of the last exported user of local_touch_nmi() a while back.
Remove the unnecessary export.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-5-sohil.mehta@intel.com
|
|
The NMI descriptors for each NMI type are stored in an array. However,
they are currently initialized using raw numbers, which makes it
difficult to understand the code.
Introduce a macro to initialize the NMI descriptors using the NMI type
enum values to make the code more readable.
No functional change intended.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-4-sohil.mehta@intel.com
|
|
Commit:
c305a4e98378 ("x86: Move sysctls into arch/x86")
recently moved the sysctl handling of panic_on_unrecovered_nmi and
panic_on_io_nmi to x86-specific code. These variables no longer need to
be declared in the generic header file.
Relocate the variable definitions and declarations closer to where they
are used. This makes all the NMI panic options consistent and easier to
track.
[ mingo: Fixed up the SHA1 of the commit reference. ]
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20250327234629.3953536-3-sohil.mehta@intel.com
|
|
The unknown_nmi_panic variable is used to control whether the kernel
should panic on unknown NMIs. There is a sysctl entry under:
/proc/sys/kernel/unknown_nmi_panic
which can be used to change the behavior at runtime.
However, it seems that in some places, the option unnecessarily depends
on CONFIG_X86_LOCAL_APIC. Other code in nmi.c uses unknown_nmi_panic
without such a dependency. This results in a few messy #ifdefs
splattered across the code. The dependency was likely introduce due to a
potential build bug reported a long time ago:
https://lore.kernel.org/lkml/40BC67F9.3000609@myrealbox.com/
This build bug no longer exists.
Also, similar NMI panic options, such as panic_on_unrecovered_nmi and
panic_on_io_nmi, do not have an explicit dependency on the local APIC
either.
Though, it's hard to imagine a production system without the local APIC
configuration, making a specific NMI sysctl option dependent on it
doesn't make sense.
Remove the explicit dependency between unknown NMI handling and the
local APIC to make the code cleaner and more consistent.
While at it, reorder the header includes to maintain alphabetical order.
[ mingo: Cleaned up the changelog a bit, truly ordered the headers ... ]
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-2-sohil.mehta@intel.com
|
|
iosf_mbi_unregister_pmic_bus_access_notifier()
The last use of iosf_mbi_unregister_pmic_bus_access_notifier() was
removed in 2017 by:
a5266db4d314 ("drm/i915: Acquire PUNIT->PMIC bus for intel_uncore_forcewake_reset()")
Remove it.
(Note that the '_unlocked' version is still used.)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20241225175010.91783-1-linux@treblig.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
|
|
do_alignment_t32_to_handler() only fixes up alignment faults for
specific instructions; it returns NULL otherwise (e.g. LDREX). When
that's the case, signal to the caller that it needs to proceed with the
regular alignment fault handling (i.e. SIGBUS). Without this patch, the
kernel panics:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000086000006
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
user pgtable: 4k pages, 48-bit VAs, pgdp=00000800164aa000
[0000000000000000] pgd=0800081fdbd22003, p4d=0800081fdbd22003, pud=08000815d51c6003, pmd=0000000000000000
Internal error: Oops: 0000000086000006 [#1] SMP
Modules linked in: cfg80211 rfkill xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack_netlink nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xfrm_user xfrm_algo xt_addrtype nft_compat br_netfilter veth nvme_fa>
libcrc32c crc32c_generic raid0 multipath linear dm_mod dax raid1 md_mod xhci_pci nvme xhci_hcd nvme_core t10_pi usbcore igb crc64_rocksoft crc64 crc_t10dif crct10dif_generic crct10dif_ce crct10dif_common usb_common i2c_algo_bit i2c>
CPU: 2 PID: 3932954 Comm: WPEWebProcess Not tainted 6.1.0-31-arm64 #1 Debian 6.1.128-1
Hardware name: GIGABYTE MP32-AR1-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : 0x0
lr : do_compat_alignment_fixup+0xd8/0x3dc
sp : ffff80000f973dd0
x29: ffff80000f973dd0 x28: ffff081b42526180 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
x23: 0000000000000004 x22: 0000000000000000 x21: 0000000000000001
x20: 00000000e8551f00 x19: ffff80000f973eb0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffaebc949bc488
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000400000 x4 : 0000fffffffffffe x3 : 0000000000000000
x2 : ffff80000f973eb0 x1 : 00000000e8551f00 x0 : 0000000000000001
Call trace:
0x0
do_alignment_fault+0x40/0x50
do_mem_abort+0x4c/0xa0
el0_da+0x48/0xf0
el0t_32_sync_handler+0x110/0x140
el0t_32_sync+0x190/0x194
Code: bad PC value
---[ end trace 0000000000000000 ]---
Signed-off-by: Angelos Oikonomopoulos <angelos@igalia.com>
Fixes: 3fc24ef32d3b ("arm64: compat: Implement misalignment fixups for multiword loads")
Cc: <stable@vger.kernel.org> # 6.1.x
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250401085150.148313-1-angelos@igalia.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
to not increase max_pfn and trigger dma_addressing_limited() bounce buffers
As Bert Karwatzki reported, the following recent commit causes a
performance regression on AMD iGPU and dGPU systems:
7ffb791423c7 ("x86/kaslr: Reduce KASLR entropy on most x86 systems")
It exposed a bug with nokaslr and zone device interaction.
The root cause of the bug is that, the GPU driver registers a zone
device private memory region. When KASLR is disabled or the above commit
is applied, the direct_map_physmem_end is set to much higher than 10 TiB
typically to the 64TiB address. When zone device private memory is added
to the system via add_pages(), it bumps up the max_pfn to the same
value. This causes dma_addressing_limited() to return true, since the
device cannot address memory all the way up to max_pfn.
This caused a regression for games played on the iGPU, as it resulted in
the DMA32 zone being used for GPU allocations.
Fix this by not bumping up max_pfn on x86 systems, when pgmap is passed
into add_pages(). The presence of pgmap is used to determine if device
private memory is being added via add_pages().
More details:
devm_request_mem_region() and request_free_mem_region() request for
device private memory. iomem_resource is passed as the base resource
with start and end parameters. iomem_resource's end depends on several
factors, including the platform and virtualization. On x86 for example
on bare metal, this value is set to boot_cpu_data.x86_phys_bits.
boot_cpu_data.x86_phys_bits can change depending on support for MKTME.
By default it is set to the same as log2(direct_map_physmem_end) which
is 46 to 52 bits depending on the number of levels in the page table.
The allocation routines used iomem_resource's end and
direct_map_physmem_end to figure out where to allocate the region.
[ arch/powerpc is also impacted by this problem, but this patch does not fix
the issue for PowerPC. ]
Testing:
1. Tested on a virtual machine with test_hmm for zone device inseration
2. A previous version of this patch was tested by Bert, please see:
https://lore.kernel.org/lkml/d87680bab997fdc9fb4e638983132af235d9a03a.camel@web.de/
[ mingo: Clarified the comments and the changelog. ]
Reported-by: Bert Karwatzki <spasswolf@web.de>
Tested-by: Bert Karwatzki <spasswolf@web.de>
Fixes: 7ffb791423c7 ("x86/kaslr: Reduce KASLR entropy on most x86 systems")
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Link: https://lore.kernel.org/r/20250401000752.249348-1-balbirs@nvidia.com
|
|
If 'regs' points to a local stack variable, prepare_frametrace() stores
all registers to the stack. This confuses objtool as it expects them to
be restored from the stack later.
The stores don't affect stack tracing, so use unwind hints to hide them
from objtool.
Fixes the following warnings:
arch/loongarch/kernel/traps.o: warning: objtool: show_stack+0xe0: stack state mismatch: reg1[22]=-1+0 reg2[22]=-2-160
arch/loongarch/kernel/traps.o: warning: objtool: show_stack+0xe0: stack state mismatch: reg1[23]=-1+0 reg2[23]=-2-152
Fixes: cb8a2ef0848c ("LoongArch: Add ORC stack unwinder support")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/270cadd8040dda74db2307f23497bb68e65db98d.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503280703.OARM8SrY-lkp@intel.com/
|
|
.option arch clobbers .option norvc. Prevent gas from emitting
compressed instructions in the runtime const alternative blocks by
setting .option norvc after .option arch. This issue starts appearing on
gcc 15, which adds zca to the march.
Reported by: Klara Modin <klarasmodin@gmail.com>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: a44fb5722199 ("riscv: Add runtime constant support")
Closes: https://lore.kernel.org/all/cc8f3525-20b7-445b-877b-2add28a160a2@gmail.com/
Tested-by: Klara Modin <klarasmodin@gmail.com>
Link: https://lore.kernel.org/r/20250331-fix_runtime_const_norvc-v1-1-89bc62687ab8@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
