summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2022-04-06ARM: dts: suniv: licheepi-nano: add microSD cardJesse Taube
Enable MMC0 and supply the board setting to enable the microSD card slot on the LicheePi Nano board. Apart from the always missing write protect switch on microSD slots, the card-detect pin is not connected to anything, so we use the broken-cd property. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> [Andre: add alias and vmmc supply] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220317162349.739636-10-andre.przywara@arm.com
2022-04-06ARM: dts: suniv: F1C100: add MMC controllersJesse Taube
The F1C100 series contains two MMC controllers, where the first one is typically connected to an (micro)SD card slot (as this is the one the BROM is able to boot from). Describe the two controllers in the SoC .dtsi. We also add the pinctrl description for MMC0, since this is the only pin set supporting that function anyway, and SD cards are very common across boards. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220317162349.739636-9-andre.przywara@arm.com
2022-04-06ARM: dts: suniv: F1C100: fix timer nodeAndre Przywara
The Allwinner F1C100s has three timer instances, each with their own interrupt line. Add the missing two interrupts to the DT node, to match the DT binding. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220317162349.739636-8-andre.przywara@arm.com
2022-04-06ARM: dts: suniv: F1C100: fix CPU nodeAndre Przywara
The /cpu node in the f1c100s.dtsi is not spec compliant, it's missing the reg property, and the corresponding address and size cells properties. Add them to make the bindings check pass. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220317162349.739636-7-andre.przywara@arm.com
2022-04-06ARM: dts: suniv: F1C100: add clock and reset macrosJesse Taube
Include clock and reset macros and replace magic numbers. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220317162349.739636-6-andre.przywara@arm.com
2022-04-06ARM: dts: suniv: F1C100: fix watchdog compatibleAndre Przywara
The F1C100 series of SoCs actually have their watchdog IP being compatible with the newer Allwinner generation, not the older one. The currently described sun4i-a10-wdt actually does not work, neither the watchdog functionality (just never fires), nor the reset part (reboot hangs). Replace the compatible string with the one used by the newer generation. Verified to work with both the watchdog and reboot functionality on a LicheePi Nano. Also add the missing interrupt line and clock source, to make it binding compliant. Fixes: 4ba16d17efdd ("ARM: dts: suniv: add initial DTSI file for F1C100s") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220317162349.739636-4-andre.przywara@arm.com
2022-04-06ARM: config: multi v7: Enable NVIDIA Tegra video decoder driverDmitry Osipenko
Enable NVIDIA Tegra V4L2 video decoder driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-04-06ARM: tegra_defconfig: Update CONFIG_TEGRA_VDE optionDmitry Osipenko
The CONFIG_TEGRA_VDE has been deprecated and replaced with the new V4L options after de-staging of the tegra-vde driver. Update the config entry. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-04-06ARM: tegra: Fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-04-06ARM: dts: imx6ul: peb-av-02: move to 3 cell pwmAndrej Picej
Instead of changing default pwm-cells property, use the default "#pwm-cells = <3>" and add the third option. Signed-off-by: Andrej Picej <andrej.picej@norik.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6ull: Add support for PHYTEC phyGATE-Tauri-S with i.MX 6ULLAlexander Bauer
Add support for the PHYTEC phyGATE-Tauri-S with i.MX 6ULL with eMMC or NAND. Supported features: * eMMC/NAND * i2c RTC * i2c TEMP * PMIC * PWM * debug UART * CAN * SD card * 2x 1Gbit Ethernet * RS232/RS485 * USB 2.0 Host * TPM * SPI-NOR Signed-off-by: Alexander Bauer <a.bauer@phytec.de> Signed-off-by: Jens Lang <j.lang@phytec.de> Signed-off-by: Andrej Picej <andrej.picej@norik.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6ull: add TQ-Systems MBa6ULLxL device treesAlexander Stein
Add device trees for the MBa6ULx mainboard with TQMa6ULLxL SoMs. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6ull: add TQ-Systems MBa6ULLx device treesAlexander Stein
Add device trees for the MBa6ULx mainboard with TQMa6ULLx SoMs. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6ul: add TQ-Systems MBa6ULxL device treesAlexander Stein
Add device trees for the MBa6ULx mainboard with TQMa6ULxL SoMs. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6ul: add TQ-Systems MBa6ULx device treesAlexander Stein
Add device trees for the MBa6ULx mainboard with TQMa6ULx SoMs. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: config: u8500: Re-enable AB8500 battery chargingLinus Walleij
This is effectively a revert of the temporary disablement patch. Battery charging now works! We also enable static battery data for the Samsung SDI batteries as used by the U8500 Samsung phones. Cc: Lee Jones <lee.jones@linaro.org> Fixes: a1149ae97554 ("ARM: ux500: Disable Power Supply and Battery Management by default") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-06ARM: config: u8500: Add some common hardwareLinus Walleij
This activates display drivers that give console on the different U8500 mobile phones, the GNSS subsystem and the SIRF GNSS driver so we can manage the GPS chips, the regulator LEDs as used in some phones and one more IIO light sensor driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-06ARM: dts: imx6qdl-victgo: add CAN termination supportDavid Jander
The gpio1 0 pin is controlling CAN termination, not USB H1 VBUS. So, remove wrong regulator and assign this gpio to new DT CAN termination property. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6dl-victgo: The TGO uses a lg,lb070wv8 compatible 7" displayRobin van der Gracht
This series of devices is using lg,lb070wv8 instead of kyo,tcg121xglp. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6dl-victgo: Add interrupt-counter nodesRobin van der Gracht
Interrupt counter is mainlined, now we can add missing counter nodes. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6qdl-vicut1: update gpio-line-names for some GPIOsDavid Jander
countedX lines have different board names (YACO_x). And REV_ and BOARD_ pins have multiple functions. So, use names exposed to the OS. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6qdl-vicut1/vicutgo: Add backlight_led nodeDavid Jander
backlight_led is the dimmable backlight for the rubber border on the case. It is also used to highlight the power- and some other buttons. MX6QDL_PAD_SD4_DAT1__PWM3_OUT is also assigned as output for pwm3. Since we need pwm3 for the backlight, we're forced to disable user space hardware revision detection. The bootloader will have to supply this information (i.e. through device tree). Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6qdl-vicut1/vicutgo: Rename backlight to backlight_lcdDavid Jander
We have two backlight sources on this boards. Use more specific name for the LCD backlight to see the difference. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6qdl-vicut1/vicutgo: Set default backlight brightness to maximumDavid Jander
Recover default behavior of the device and set maximal brightness Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: config: Refresh U8500 defconfigLinus Walleij
This just updates the U8500 defconfig to reflect what has happened in the Kconfig: DRM_PANEL_SONY_ACX424AKP is now handled by DRM_PANEL_NOVATEK_NT35560, all ST sensors have SPI version drivers that we don't use, and some debug options moved around. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-06ARM: dts: ux500: Add GPS to Skomer device treeLinus Walleij
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-06ARM: dts: ux500: Add GPS to Janice device treeLinus Walleij
This adds the CSR GSD4t GPS to the Janice device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-04ARM: dts: ux500: Add line impedance to fuel gaugeLinus Walleij
The line impedance is used to improve battery capacity estimation. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-04ARM: dts: ux500: Register Amstaos proximity sensorLinus Walleij
The proximity sensor on the Codina is actually an Amstaos TMD2672, not Mouser, so alter the DTS to reflect this. Tested successfully with the IIO driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-04ARM: dts: ux500: Add Codina TMO device treeLinus Walleij
This adds a device tree for "Codina TMO" also known as Samsung Galaxy Exhibit or Samsung SGH-T599. It is quite different from the vanilla Codina despite sharing the same board file in the vendor tree. Fix up some comments in the Codina DTS while we're at it. Cc: phone-devel@vger.kernel.org Cc: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220222233313.1774416-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-04ARM: dts: ste-dbx: Update spi clock-names propertyKuldeep Singh
Now that spi pl022 binding only accept "sspclk" as clock name, ST ericsson platform with "SSPCLK" clock name start raising dtbs_check warnings. Make necessary changes to update this property in order to make it compliant with binding. clock-names:0: 'sspclk' was expected Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> Link: https://lore.kernel.org/r/20220312113853.63446-5-singh.kuldeep87k@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-04ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and BCM53016 SoCArınç ÜNAL
Fix compatible strings for devicetrees using the BCM53012 and BCM53016 SoC. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-04-04ARM: dts: BCM5301X: Retrieve gmac1 MAC address from NVRAM on Asus RT-AC88UArınç ÜNAL
The et1macaddr NVRAM variable contains a MAC address for gmac1 on Asus RT-AC88U. Add NVMEM cell for it and reference it in the gmac1 node. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-04-04ARM: dts: BCM5301X: Add rgmii to port@5 of Broadcom switch on Asus RT-AC88UArınç ÜNAL
Define phy-mode of the Broadcom switch's port@5 as rgmii. This doesn't seem to matter but let's explicitly define it since phy-mode as rgmii is defined on the other side which is port@6 of the Realtek switch. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-04-04ARM: dts: BCM5301X: Remove cell properties from srab ports on Asus RT-AC88UArınç ÜNAL
Remove #address-cells and #size-cells properties from the ports node of &srab. They are already defined on bcm5301x.dtsi, there's no need to define them again. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-04-04ARM: dts: BCM5301X: Fix DTC warning for NAND nodeArınç ÜNAL
Remove the unnecessary #address-cells and #size-cells properties on the nand@0 node to fix the warning below. Warning (avoid_unnecessary_addr_size): /nand-controller@18028000/nand@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-04-04ARM: dts: BCM5301X: Update pin controller node nameRafał Miłecki
This fixes: arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: cru-bus@100: 'pin-controller@1c0' does not match any of the regexes: '^clock-controller@[a-f0-9]+$', '^phy@[a-f0-9]+$', '^pinctrl@[a-f0-9]+$', '^syscon@[a-f0-9]+$', '^thermal@[a-f0-9]+$' From schema: Documentation/devicetree/bindings/mfd/brcm,cru.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$' From schema: Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml Ref: e7391b021e3f ("dt-bindings: mfd: brcm,cru: Rename pinctrl node") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-04-04ARM: brcmstb: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-04-04ARM: dts: bcm-cygnus: Update spi clock propertiesKuldeep Singh
PL022 binding require two clocks to be defined but broadcom cygnus platform doesn't comply with bindings and define only one clock. Update spi clocks and clocks-names property by adding appropriate clock reference to make it compliant with bindings. CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-04-04ARM: mm: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-04-04ARM: s3c: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220318103729.157574-31-Julia.Lawall@inria.fr Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-04-04ARM: dts: s5pv210: Use standard arrays of generic PHYs for EHCI/OHCI deviceKrzysztof Kozlowski
Move USB PHYs to a standard arrays for S5PV210 EHCI/OHCI devices. This resolves the conflict between S5PV210 EHCI/OHCI sub-nodes and generic USB device bindings. Suggested-by: Måns Rullgård <mans@mansr.com> Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220314181948.246434-3-krzysztof.kozlowski@canonical.com
2022-04-04ARM: dts: s5pv210: align EHCI/OHCI nodes with dtschemaKrzysztof Kozlowski
The node names should be generic and USB DT schema expects "usb" names. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220314181948.246434-2-krzysztof.kozlowski@canonical.com
2022-04-04ARM: dts: exynos: align EHCI/OHCI nodes with dtschema on Exynos4Krzysztof Kozlowski
The node names should be generic and USB DT schema expects "usb" names. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220314181948.246434-1-krzysztof.kozlowski@canonical.com
2022-04-04ARM: dts: exynos: drop deprecated SFR region from MIPI phyKrzysztof Kozlowski
Commit e4b3d38088df ("phy: exynos-video-mipi: Fix regression by adding support for PMU regmap") deprecated the usage of unit address in MIPI phy node, in favor of a syscon phandle. Deprecating was a correct approach because that unit address was actually coming from Power Management Unit SFR range so its usage here caused overlapped memory mapping. In 2016 commit 26dbadba495f ("phy: exynos-mipi-video: Drop support for direct access to PMU") fully removed support for parsing that MIPI phy unit address (SFR range) but the address stayed in Exynos5250 DTSI for compatibility reasons. Remove that deprecated unit address from Exynos5250 MIPI phy, because it has been almost 6 years since it was deprecated and it causes now DT schema validation warnings: video-phy@10040710: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Any out-of-tree users of Exynos5250 DTSI, should update their code to use newer syscon property. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar<alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220314184113.251013-1-krzysztof.kozlowski@canonical.com
2022-04-04ARM: dts: exynos: add a specific compatible to MCTKrzysztof Kozlowski
One compatible is used for the Multi-Core Timer on most of the Samsung Exynos SoCs, which is correct but not specific enough. These MCT blocks have different number of interrupts, so add a second specific compatible to Exynos3250 and all Exynos5 SoCs. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220304122424.307885-3-krzysztof.kozlowski@canonical.com
2022-04-04ARM: dts: bcm283x: fix ethernet node nameOleksij Rempel
It should be "ethernet@x" instead of "usbether@x" as required by Ethernet controller devicetree schema: Documentation/devicetree/bindings/net/ethernet-controller.yaml This patch can potentially affect boot loaders patching against full node path instead of using device aliases. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-04-04ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on OdroidKrzysztof Kozlowski
Passing maximum frequency of LPDDR3 memory timings as unit address was deprecated in favor of 'max-freq' property. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20220206135918.211990-1-krzysztof.kozlowski@canonical.com
2022-04-04ARM: s3c: Drop config symbol S3C24XX_PWMUwe Kleine-König
The only effect of this symbol is to select PWM_SAMSUNG. Drop it and fix the affected defconfigs to still keep PWM_SAMSUNG=y. Developers using MACH_NEO1973_GTA02 and/or MACH_RX1950 now have to manually select PWM and PWM_SAMSUNG (and get the freedom to select is as a module or not at all). A side effect of this change is that allmodconfig now contains PWM_SAMSUNG=m (which was =y before). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220328082638.112185-1-u.kleine-koenig@pengutronix.de Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-04-04ARM: dts: exynos: fix compatible strings for Ethernet USB devicesOleksij Rempel
Fix compatible string for Ethernet USB device as required by USB device schema: Documentation/devicetree/bindings/usb/usb-device.yaml The textual representation of VID and PID shall be in lower case hexadecimal with leading zeroes suppressed. Since there are no kernel driver matching against this compatibles, I expect no regressions with this patch. At the same time, without this fix, we are not be able to validate this device nodes with newly provided DT schema. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220216074927.3619425-7-o.rempel@pengutronix.de Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
generated by cgit v1.2.3 (git 2.51.0) at 2026-11-08 11:10:53 +0000