summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2022-05-03ARM: dts: am43xx: Add i2c voltage scaling firmware to wkup_m3_ipcDave Gerlach
Add appropriate firmware-name property for all am43xx platforms. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> [dfustini: change property from 'ti,scale-data-fw' to 'firmware-name'] Signed-off-by: Drew Fustini <dfustini@baylibre.com> Message-Id: <20220502021508.1342869-4-dfustini@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: am33xx: Add i2c voltage scaling firmware to wkup_m3_ipcDave Gerlach
Add appropriate firmware-name property for all am33xx platforms. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [dfustini: change property from 'ti,scale-data-fw' to 'firmware-name'] Signed-off-by: Drew Fustini <dfustini@baylibre.com> Message-Id: <20220502021508.1342869-3-dfustini@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: am437x-gp-evm: Enable wkup_m3 control of IO isolationDave Gerlach
With this flag wkup_m3 is able to control IO isolation during suspend on the board. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Drew Fustini <dfustini@baylibre.com> Message-Id: <20220502021508.1342869-2-dfustini@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-02ARM: dts: stm32: add support for Protonic PRTT1x boardsOleksij Rempel
This boards are based on STM32MP151AAD3 and use 10BaseT1L for communication. - PRTT1C - 10BaseT1L switch - PRTT1S - 10BaseT1L CO2 sensor board - PRTT1A - 10BaseT1L multi functional controller Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-05-02ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux groupOleksij Rempel
Add spi1-1 pingroup as preparation for Protonic PRTT1C board. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-04-29Merge tag 'soc-fixes-5.18-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: - A fix for a regression caused by the previous set of bugfixes changing tegra and at91 pinctrl properties. More work is needed to figure out what this should actually be, but a revert makes it work for the moment. - Defconfig regression fixes for tegra after renamed symbols - Build-time warning and static checker fixes for imx, op-tee, sunxi, meson, at91, and omap - More at91 DT fixes for audio, regulator and spi nodes - A regression fix for Renesas Hyperflash memory probe - A stability fix for amlogic boards, modifying the allowed cpufreq states - Multiple fixes for system suspend on omap2+ - DT fixes for various i.MX bugs - A probe error fix for imx6ull-colibri MMC - A MAINTAINERS file entry for samsung bug reports * tag 'soc-fixes-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) Revert "arm: dts: at91: Fix boolean properties with values" bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create() Revert "arm64: dts: tegra: Fix boolean properties with values" arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock ARM: dts: imx6ull-colibri: fix vqmmc regulator MAINTAINERS: add Bug entry for Samsung and memory controller drivers memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35 ARM: dts: am3517-evm: Fix misc pinmuxing ARM: dts: am33xx-l4: Add missing touchscreen clock properties ARM: dts: Fix mmc order for omap3-gta04 ARM: dts: at91: fix pinctrl phandles ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name ARM: dts: at91: Describe regulators on at91sam9g20ek ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek ARM: dts: at91: Fix boolean properties with values ARM: dts: at91: use generic node name for dataflash ARM: dts: at91: align SPI NOR node name with dtschema ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines ...
2022-04-29vmcore: convert copy_oldmem_page() to take an iov_iterMatthew Wilcox (Oracle)
Patch series "Convert vmcore to use an iov_iter", v5. For some reason several people have been sending bad patches to fix compiler warnings in vmcore recently. Here's how it should be done. Compile-tested only on x86. As noted in the first patch, s390 should take this conversion a bit further, but I'm not inclined to do that work myself. This patch (of 3): Instead of passing in a 'buf' and 'userbuf' argument, pass in an iov_iter. s390 needs more work to pass the iov_iter down further, or refactor, but I'd be more comfortable if someone who can test on s390 did that work. It's more convenient to convert the whole of read_from_oldmem() to take an iov_iter at the same time, so rename it to read_from_oldmem_iter() and add a temporary read_from_oldmem() wrapper that creates an iov_iter. Link: https://lkml.kernel.org/r/20220408090636.560886-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20220408090636.560886-2-bhe@redhat.com Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29Revert "arm: dts: at91: Fix boolean properties with values"Arnd Bergmann
This reverts commit 0dc23d1a8e17, which caused another regression as the pinctrl code actually expects an integer value of 0 or 1 rather than a simple boolean property. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29Merge tag 'tegra-for-5.18-arm-defconfig-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes ARM: tegra: Default configuration fixes for v5.18 This contains two updates to the default configuration needed because of a Kconfig symbol name change. This fixes a failure that was detected in the NVIDIA automated test farm. * tag 'tegra-for-5.18-arm-defconfig-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: config: multi v7: Enable NVIDIA Tegra video decoder driver ARM: tegra_defconfig: Update CONFIG_TEGRA_VDE option Link: https://lore.kernel.org/r/20220429080626.494150-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29Merge tag 'imx-fixes-5.18-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.18, 2nd round: - Fix one sparse warning on imx-weim driver. - Fix vqmmc regulator to get UHS-I mode work on imx6ull-colibri board. - Add missing 32.768 kHz PMIC clock for imx8mn-ddr4-evk board to fix bd718xx-clk probe error. * tag 'imx-fixes-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock ARM: dts: imx6ull-colibri: fix vqmmc regulator bus: imx-weim: make symbol 'weim_of_notifier' static Link: https://lore.kernel.org/r/20220426013427.GB14615@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29ARM: omap1: add back omap_set_dma_priority() stubArnd Bergmann
One of my multiplatform patches went a little too far and removed a declaration that is needed for compile-testing the omapfb driver on non-OMAP1 platforms: arm-linux-gnueabi-ld: drivers/video/fbdev/omap/omapfb_main.o: in function `omapfb_do_probe': omapfb_main.c:(.text+0x41ec): undefined reference to `omap_set_dma_priority' Add back the inline stub, and in turn hide the definition when omapfb is disabled, like we do for the usb specific bits. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Fixes: 52ef8efcb75e ("dma: omap: hide legacy interface") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29ARM: omap: fix missing declaration warningsArnd Bergmann
Moving the plat-omap files triggered a sparse warning for omap1 and omap2 that is now in a different file from before. Found some more sparse warnings here that I address by making sure the declaration is visible to both the caller and the callee, or they are static mach-omap1/fb.c:33:17: warning: symbol 'omap_fb_resources' was not declared. Should it be static? mach-omap1/timer32k.c:215:12: warning: symbol 'omap_init_clocksource_32k' was not declared. Should it be static? mach-omap1/i2c.c:36:12: warning: symbol 'omap_i2c_add_bus' was not declared. Should it be static? mach-omap1/i2c.c:115:12: warning: symbol 'omap_register_i2c_bus_cmdline' was not declared. Should it be static? mach-omap1/i2c.c:140:12: warning: symbol 'omap_register_i2c_bus' was not declared. Should it be static? mach-omap2/dma.c:180:34: warning: symbol 'dma_plat_info' was not declared. Should it be static? mach-omap2/omap4-common.c:116:6: warning: symbol 'omap_interconnect_sync' was not declared. Should it be static? mach-omap2/omap-iommu.c:113:5: warning: symbol 'omap_iommu_set_pwrdm_constraint' was not declared. Should it be static? Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29ARM: omap: fix address space warnings from sparseArnd Bergmann
Moving sram code from plat-omap got the attention of the kernel test robot. I found a few more places with related warnings because the sram references are a mix of kernel pointers and __iomem pointers: mach-omap1/sram-init.c:56:17: warning: cast removes address space '__iomem' of expression mach-omap1/board-ams-delta.c:667:9: warning: incorrect type in argument 1 (different base types) mach-omap2/sram.c:78:17: warning: cast removes address space '__iomem' of expression mach-omap2/omap4-common.c:142:27: warning: incorrect type in assignment (different address spaces) mach-omap2/omap4-common.c:142:27: expected void [noderef] __iomem *static [toplevel] sram_sync mach-omap2/omap4-common.c:142:27: got void * mach-omap2/pm34xx.c:113:45: warning: incorrect type in argument 1 (different address spaces) mach-omap2/pm34xx.c:113:45: expected void [noderef] __iomem *save_regs mach-omap2/pm34xx.c:113:45: got void *extern [addressable] [toplevel] omap3_secure_ram_storage There is no good solution here, as sram is a bit special in this regard. Change the annotations to at least shut up the warnings. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29ARM: spear: remove include/mach/ subdirectoryArnd Bergmann
Two of the remaining four headers are never used, the other two are only used inside of the platform code. Move them next to the files that include them and remove the Makefile trick that adds the include path. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29ARM: davinci: remove include/mach/ subdirectoryArnd Bergmann
The files in include/mach are only used from mach/davinci, so they are no longer needed in the traditional location. Move them to arch/arm/mach-davinci/ and drop the logic for the special include path. The mach/uncompress.h file is not used at all and can just be removed. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29ARM: omap2: remove include/mach/ subdirectoryArnd Bergmann
mach/serial.h is only included from arch/arm/mach-omap2/serial.h, and the other two files are unused and empty. Remove the directory by relocating the contents of mach/serial.h and dropping all other references. Reviewed-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29ARM: dts: am335x-myirtech: Update NAND default partition table layoutAlexander Shiyan
This patch replaces the legacy partition table layout with a modern style. As an additional change, we are reserving space for three backup MLO entries and increasing space for the main bootloader. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Message-Id: <20220427081914.6773-2-eagle.alexander923@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-29ARM: dts: am335x-myirtech: Add an external clock oscillator for CPU RTCAlexander Shiyan
The CPU RTC has an external crystal, so to keep time, let's define it for devicetree. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Message-Id: <20220427081914.6773-1-eagle.alexander923@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/linux/netdevice.h net/core/dev.c 6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats") 794c24e9921f ("net-core: rx_otherhost_dropped to core_stats") https://lore.kernel.org/all/20220428111903.5f4304e0@canb.auug.org.au/ drivers/net/wan/cosa.c d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()") 89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards") https://lore.kernel.org/all/20220428112130.1f689e5e@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28ARM: dts: qcom: msm8974: Add missing license headersLuca Weiss
All other msm8974 dts files are licensed as GPL-2.0 so add the same header to the files where it's missing. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220421211936.345168-3-luca@z3ntu.xyz
2022-04-28ARM: dts: qcom: msm8974-FP2: Add mmc* aliasesLuca Weiss
Add aliases for internal storage and SD card so they don't randomly switch around. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220421211936.345168-2-luca@z3ntu.xyz
2022-04-28ARM: dts: qcom: msm8974-FP2: We're msm8974proLuca Weiss
Fairphone 2 always uses Snapdragon 801, a.k.a msm8974pro so change the include and filename to that. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220421211936.345168-1-luca@z3ntu.xyz
2022-04-28ARM: dts: r9a06g032: Add missing '#power-domain-cells'Herve Codina
Without '#power-domain-cells' property, power-domains cannot be used. This property is noted required in the device-tree binding. Add '#power-domain-cells' as needed. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20220422120850.769480-6-herve.codina@bootlin.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28ARM: dts: aspeed: add reset properties into MDIO nodesDylan Hung
Add reset control properties into MDIO nodes. The 4 MDIO controllers in AST2600 SOC share one reset control bit SCU50[3]. Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-26Merge tag 'pinctrl-v5.18-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Fix some register offsets on Intel Alderlake - Fix the order the UFS and SDC pins on Qualcomm SM6350 - Fix a build error in Mediatek Moore. - Fix a pin function table in the Sunplus SP7021. - Fix some Kconfig and static keywords on the Samsung Tesla FSD SoC. - Fix up the EOI function for edge triggered IRQs and keep the block clock enabled for level IRQs in the STM32 driver. - Fix some bits and order in the Rockchip RK3308 driver. - Handle the errorpath in the Pistachio driver probe() properly. * tag 'pinctrl-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: pistachio: fix use of irq_of_parse_and_map() pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested pinctrl: rockchip: sort the rk3308_mux_recalced_data entries pinctrl: rockchip: fix RK3308 pinmux bits pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs in EOI pinctrl: Fix an error in pin-function table of SP7021 pinctrl: samsung: fix missing GPIOLIB on ARM64 Exynos config pinctrl: mediatek: moore: Fix build error pinctrl: qcom: sm6350: fix order of UFS & SDC pins pinctrl: alderlake: Fix register offsets for ADL-N variant pinctrl: samsung: staticize fsd_pin_ctrl
2022-04-26ARM: dts: ux500: Add GPS to the CodinaLinus Walleij
The Codina has a Broadcom BCM4751 GPS chip. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-26ARM: dts: i.MX51: digi-connectcore-jsk: Use usb-nop-xceiv usbphy for USB1Alexander Shiyan
Add node describing the USB1 usbphy. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-26ARM: dts: i.MX51: digi-connectcore-som: Setup usbotg vbus-supplyAlexander Shiyan
The VBUS on usbotg is connected to the PMIC SWBST, let's reflect that in the bindings. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-26ARM: dts: i.MX51: digi-connectcore-som: Update PMIC voltagesAlexander Shiyan
This patch updates the PMIC voltages according to the module's datasheet to match both commercial and industrial variants of the module. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-26ARM: dts: i.MX51: digi-connectcore-som: Remove unused regulatorsAlexander Shiyan
VGEN1, VGEN2 and GPO1 regulators are not used on SOM. Let's remove these entries. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-26ARM: dts: imx51: Add generic DMA bindings for UART nodesAlexander Shiyan
Updates UART nodes to adopt generic DMA bindings. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-26ARM: dts: Add initial LS1021A IoT board dts supportChangming Huang
The LS1021A-IoT gateway reference design is a purpose-built, small footprint hardware platform equipped with a wide array of both high-speed connectivity and low speed serial interfaces. CC: Li Yang <leoyang.li@nxp.com> Signed-off-by: Changming Huang <jerry.huang@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-25gpio: pcf857x: Make teardown callback return voidUwe Kleine-König
All teardown functions return 0. Also there is little sense in returning a negative error code from an i2c remove function as this only results in emitting an error message but the device is removed nevertheless. This patch is a preparation for making i2c remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: add thermal zone and attach tmp103 to it.Oleksij Rempel
Latest version of ti,tmp103 driver supports thermal zone. So make use of it. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Add missing ISB led nodeDavid Jander
Add missing ISB led node. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6dl-victgo.dts: Remove touchscreen x axis inversionDavid Jander
X axis is not inverted in hardware. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1: Factor out common parts of 12inch board variantsDavid Jander
Factor out common parts of vicut1 and vicutp to reduce maintenance overhead. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: Remove imx6qdl-victgo.dtsiDavid Jander
The common base is now identical to imx6qdl-vicut1.dtsi, so we can remove one of both. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Move some node out to DTS filesDavid Jander
This commit will finally make this file identical to imx6qdl-victgo.dtsi. All nodes that are removed here are added as-is to the DTS files that include this file. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6dl-victgo.dts: Factor out common parts to imx6qdl-victgo.dtsiDavid Jander
These parts are common to imx6qdl-vicut1.dtsi. This patch is preparation to unify victgo and vicut1 DTs. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6dl-victgo.dts: update gpio namesDavid Jander
Following changes was made: - Add MDIO signal names - Add missing ISB_IN2 name. Also correct ISB_nIN1. These two signals were used together in older HW revisions. Later ISB_IN2 was removed. Software should still be able to use both. - Add missing CAN1 and UART line names - Add missing ON1/2_CTRL line names - fix CPU_* line names. The real signal names are without the CPU_ prefix, like on imx6qdl-vicut1.dtsi - Fix ETH_INT signal name Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6q-vicut1.dts: remove sata nodeDavid Jander
Only the prototype had the SATA interface. There are no existing products with SATA interface and no plans to add any. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Remove conflicting pinctrl entryDavid Jander
The function of DISP0_DAT9 is dependent on hardware revision of two particular variants. This setting should be done by the bootloader anyway, and is not needed in the kernel, so remove it from the DT. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Update GPIO line namesDavid Jander
Add some missing names and remove names to pins that have never been used and/or are not present on any hardware. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Fix debug LED gpio pinsDavid Jander
While there are LEDs connected on some variants on GPIO4 pins 16 and 17, those are not the debug LEDs that should be visible to user-space. It should be the same as in imx6dl-victgo.dtsi. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Fix LED namesDavid Jander
The names should be consistent with the names in imx6dl-victgo.dts This patch is preparation to unify vicut1 and victgo DTs. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1/victgo: Remove UART2David Jander
Only first prototype had UART2 and there are no plans to add it in the future. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Remove PCIeDavid Jander
Only the very first prototypes had PCIe and there are no plant to add it in the future. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Put nON_SWITCH in own pinctrl grpDavid Jander
Unify nON_SWITCH pinctrl configuration with imx6dl-victgo.dts. This patch is a preparation to reduce duplicated code between vicut1 and victgo. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: remove TiWi moduleDavid Jander
Only the first prototypes had a TiWi module. There is no publicly available hardware where this module is fitted and there are no plan to produce any. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.51.0) at 2026-11-05 12:10:07 +0000