summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2022-05-05ARM: dts: mba6ulx: Remove unnecessary #address-cells/#size-cellsFabio Estevam
The following W=1 dtc warning is seen: arch/arm/boot/dts/mba6ulx.dtsi:33.26-64.4: Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Remove the unnecessary #address-cells/#size-cells to fix it. Fixes: 7b8861d8e627 ("ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-05ARM: dts: update ifc node name to be memory-controllerLi Yang
Update the node name to be align with latest binding. Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-05ARM: dts: ls1021a: remove "simple-bus" compatible from ifc nodeLi Yang
The binding of ifc device has been updated. Update dts to match accordingly. Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-04ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)Alexandre Torgue
Add a "secure" version based on SCMI of STM32 boards. Only boards provided by STMicroelectronics are concerned: -STM32MP157A-DK1 -STM32MP157C-DK2 -STM32MP157C-ED1 -STM32MP157C-EV1 Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-05-04ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15Alexandre Torgue
Enable optee and SCMI clocks/reset protocols support. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-05-04ARM: dts: socfpga: drop useless 'dma-channels/requests' propertiesKrzysztof Kozlowski
The pl330 DMA controller provides number of DMA channels and requests through its registers, so duplicating this information (with a chance of mistakes) in DTS is pointless. Additionally the DTS used always wrong property names which causes DT schema check failures - the bindings documented 'dma-channels' and 'dma-requests' properties without leading hash sign. Reported-by: Rob Herring <robh@kernel.org> Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220430121902.59895-3-krzysztof.kozlowski@linaro.org
2022-05-04ARM: dts: zynq-7000: drop useless 'dma-channels/requests' propertiesKrzysztof Kozlowski
The pl330 DMA controller provides number of DMA channels and requests through its registers, so duplicating this information (with a chance of mistakes) in DTS is pointless. Additionally the DTS used always wrong property names which causes DT schema check failures - the bindings documented 'dma-channels' and 'dma-requests' properties without leading hash sign. Reported-by: Rob Herring <robh@kernel.org> Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20220430121902.59895-2-krzysztof.kozlowski@linaro.org
2022-05-04ARM: dts: exynos: drop useless 'dma-channels/requests' propertiesKrzysztof Kozlowski
The pl330 DMA controller provides number of DMA channels and requests through its registers, so duplicating this information (with a chance of mistakes) in DTS is pointless. Additionally the DTS used always wrong property names which causes DT schema check failures - the bindings documented 'dma-channels' and 'dma-requests' properties without leading hash sign. Reported-by: Rob Herring <robh@kernel.org> Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220430121902.59895-8-krzysztof.kozlowski@linaro.org
2022-05-04ARM: dts: s5pv210: drop useless 'dma-channels/requests' propertiesKrzysztof Kozlowski
The pl330 DMA controller provides number of DMA channels and requests through its registers, so duplicating this information (with a chance of mistakes) in DTS is pointless. Additionally the DTS used always wrong property names which causes DT schema check failures - the bindings documented 'dma-channels' and 'dma-requests' properties without leading hash sign. Reported-by: Rob Herring <robh@kernel.org> Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220430121902.59895-7-krzysztof.kozlowski@linaro.org
2022-05-03ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2SHIMAMOTO Takayoshi
Buffalo WZR-1166DHP/WZR-1166DHP2 wireless router with - BCM4708A0 - 128MiB NAND flash - 2T2R 11ac/a/b/g/n Wi-Fi - 4x 10/100/1000M ethernet switch - 1x USB 3.0 port WZR-1166DHP and WZR-1166DHP2 have different memory capacity. WZR-1166DHP - 512 MiB DDR2 SDRAM WZR-1166DHP2 - 256 MiB DDR2 SDRAM These hardware components are very similar to the WZR-1750DHP except for the number of antennas. Signed-off-by: SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-05-03ARM: dts: qcom: msm8974-FP2: Add supplies for remoteprocsLuca Weiss
Those were removed from msm8974.dtsi as part of a recent cleanup commit, so add them back for FP2. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220421214243.352469-3-luca@z3ntu.xyz
2022-05-03ARM: dts: qcom: msm8974-FP2: Configure chargerLuca Weiss
Set the relevant properties on the smbb charger to allow the device to charge properly. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220421214243.352469-2-luca@z3ntu.xyz
2022-05-03ARM: dts: qcom: msm8974-FP2: Add support for touchscreenLuca Weiss
Configure the touchscreen found on the new display module of the FP2. To add some detail, FP2 has two different screen/touchscreen variants ("display module"), the old module has Synaptics touchscreen, the new one this Ilitek touchscreen. We're only supporting the new display module for now. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220421214243.352469-1-luca@z3ntu.xyz
2022-05-03ARM: dts: qcom: sdx55: Remove ipa interconnect nodeStephen Boyd
This device node is unused now that we've removed the driver that consumed it in the kernel. Drop the unused node to save some space. Cc: Alex Elder <elder@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Cc: Mike Tipton <quic_mdtipton@quicinc.com> Cc: Georgi Djakov <djakov@kernel.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220415005828.1980055-2-swboyd@chromium.org
2022-05-03ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROMKrzysztof Kozlowski
The Samsung s524ad0xd1 EEPROM should use atmel,24c128 fallback, according to the AT24 EEPROM bindings. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220426183443.243113-1-krzysztof.kozlowski@linaro.org
2022-05-03ARM: versatile: Add missing of_node_put in dcscb_initPeng Wu
The device_node pointer is returned by of_find_compatible_node with refcount incremented. We should use of_node_put() to avoid the refcount leak. Signed-off-by: Peng Wu <wupeng58@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220428230356.69418-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03Merge tag 'omap-for-v5.19/soc-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc Soc clean-up for omaps Soc clean-up for omaps to add missing of_node_put() calls and drop unused omap_device_register(). * tag 'omap-for-v5.19/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: drop hwmod-clock helper comment ARM: OMAP2+: drop omap_device_register() helper ARM: OMAP2+: add missing of_node_put before break and return Link: https://lore.kernel.org/r/pull-1651061256-836848@atomide.com-3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03Merge tag 'aspeed-v5.18-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/fixes ASPEED device tree fixes for v5.18 - Quad SPI device tree corrections - Reinstate GFX node that was removed - romed8hm3 machine fixes * tag 'aspeed-v5.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: Add video engine to g6 ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi Link: https://lore.kernel.org/r/CACPK8XdhLfafOfqvR0r7p6V6AhtNXD4uZGaz7Y+Y4P-rc9p0tQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03ARM: dts: stm32: add UserPA13 button on stm32mp135f-dkFabien Dessenne
The PA13 user button is connected to the PA13 pin of the stm32mp135f-dk board. It requires an internal pull-up configuration. Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-05-03ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dkFabien Dessenne
The blue led (Linux heartbeat) is connected to the PA14 pin of the stm32mp135f-dk board. Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-05-03ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131Fabien Dessenne
Add interrupt-parent property in pinctrl node to use GPIO as IRQ. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-05-03Merge tag 'amlogic-arm-dt-for-v5.19' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt Amlogic ARM DT changes for v5.19: - align SPI NOR node name with dtschema * tag 'amlogic-arm-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: dts: meson: align SPI NOR node name with dtschema Link: https://lore.kernel.org/r/fbd7cbe7-1fe9-7009-37d6-c01b15c93032@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03Merge tag 'ux500-dts-v5.19' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Ux500 DTS updates for the v5.19 kernel cycle: - New devicetree for Codina TMO (SGH-T599). - Add the Amastaos proximity sensor to the Codina. - Add line impedance per machine to the Fuel Gauge nodes. - Add GPS to Janice, Skomer and Codina. - Add NFC to the Codina for GT-I8160P. - Some janitorial like clock names. * tag 'ux500-dts-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: ux500: Add GPS to the Codina ARM: dts: ux500: Add NFC to the Codina ARM: dts: ux500: Add GPS to Skomer device tree ARM: dts: ux500: Add GPS to Janice device tree ARM: dts: ux500: Add line impedance to fuel gauge ARM: dts: ux500: Register Amstaos proximity sensor ARM: dts: ux500: Add Codina TMO device tree dt-bindings: arm: ux500: Document Codina-TMO ARM: dts: ste-dbx: Update spi clock-names property Link: https://lore.kernel.org/r/CACRpkdYngWscqak5phKm58O2GF0RmVETgwW4NCKTBiASdaEcyg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03Merge tag 'omap-for-v5.19/dt-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps Devicetree changes for omaps: - A series of changes to fix devicetree binding check warnings for omaps the the use of clock-output-names and clksel bindings - Update Ethernet node names for omaps - Pinctrl updates for logicpd-som-lv - A series of updates for am335x-guardian - Regulator range update for am335x-baltos Note that this branch is based on a upstream IOMMU fix as it's needed for booting on some SoCs. * tag 'omap-for-v5.19/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (29 commits) ARM: dts: am335x-baltos: update MPU regulator range ARM: dts: am335x: Guardian: Update comments ARM: dts: am335x: Guardian: Add gpio line manes ARM: dts: am335x: Guardian: Update interface pinmux ARM: dts: am335x: Guardian: Disable DMA property of USB1 ARM: dts: am335x: Guardian: Enable UART port two ARM: dts: am335x: Guardian: Update backlight parameter ARM: dts: am335x: Guardian: Add lcd port ARM: dts: am335x: Guardian: Update regulator node name ARM: dts: am335x: Guardian: Update beeper label ARM: dts: am335x: Guardian: Update life led ARM: dts: am335x: Guardian: Remove mmc status led ARM: dts: am335x: Guardian: Disable poweroff support from RTC ARM: dts: am335x: Guardian: Add keypad ARM: dts: am335x: Guardian: Rename power button label ARM: dts: am335x: Guardian: Update NAND partition table ARM: dts: logicpd-som-lv: Move pinmuxing to peripheral nodes ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boards ARM: dts: Drop custom clkctrl compatible and update omap5 l4per ARM: dts: Add clock-output-names for omap5 ... Link: https://lore.kernel.org/r/pull-1650961799-428630@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03Merge tag 'renesas-arm-dt-for-v5.19-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.19 - ADC, SDHI, CAN-FD, I2C, QSPI, timer, watchdog, sound, USB, SPI, GPU, cpufreq, and thermal support for the RZ/V2L SoC, and the RZ/V2L SMARC EVK development board, - USB, I2C, Audio, NOR Flash, timer, SPI support for RZ/G2LC SMARC EVK development board, - Can-FD support for the R-Car M30W+ and V3U SoCs, and the Falcon development board, - I2C and GPIO support for the R-Car S4-8 SoC, - I2C EEPROM support for the Falcon development board, - SPI Multi I/O Bus Controller (RPC-IF) support for the R-Car H3, M3-W(+), M3-N, E3, and D3 SoCs, - RPC HyperFlash support for the Draak, Ebisu, Salvator-X(S), and ULCB development boards, - Initial support (UART, DMAC, pin control, SDHI, eMMC, Ethernet) for the RZ/G2UL SoC, and the RZ/G2UL SMARC EVK development board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (55 commits) ARM: dts: r9a06g032: Drop "arm,cortex-a7-timer" from timer node arm64: dts: renesas: r8a779f0: Add GPIO nodes arm64: dts: renesas: rzg2ul-smarc-som: Enable Ethernet on SMARC platform arm64: dts: renesas: rzg2ul-smarc-som: Enable eMMC on SMARC platform arm64: dts: renesas: rzg2ul-smarc: Enable microSD on SMARC platform arm64: dts: renesas: r9a07g043: Add GbEthernet nodes arm64: dts: renesas: r9a07g043: Add SDHI nodes arm64: dts: renesas: rzg2ul-smarc: Add scif0 and audio clk pins arm64: dts: renesas: r9a07g043: Fillup the pinctrl stub node arm64: dts: renesas: Add initial device tree for RZ/G2UL Type-1 SMARC EVK arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC arm64: dts: renesas: rzg2l-smarc: Move gpios property of vccq_sdhi1 from common dtsi arm64: dts: renesas: rzg2lc-smarc: Enable RSPI1 on carrier board arm64: dts: renesas: ulcb: Add RPC HyperFlash device node arm64: dts: renesas: salvator-common: Add RPC HyperFlash device node arm64: dts: renesas: ebisu: Add RPC HyperFlash device node arm64: dts: renesas: draak: Add RPC HyperFlash device node arm64: dts: renesas: rcar-gen3: Add RPC device nodes arm64: dts: renesas: rcar-gen4: Add interrupt properties to watchdog nodes arm64: dts: renesas: rzg2: Add interrupt properties to watchdog nodes ... Link: https://lore.kernel.org/r/cover.1650638505.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03Merge tag 'omap-for-v5.19/defconfig-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig Defconfig changes for omaps Changes to add tlv320aic3x and is176x drivers as loadable modules to omap2plus_defconfig. * tag 'omap-for-v5.19/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: Enable ISP176x USB driver ARM: omap2plus_defconfig: enable TLV320AIC3X Link: https://lore.kernel.org/r/pull-1651061256-836848@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03Merge tag 'renesas-arm-defconfig-for-v5.19-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig Renesas ARM defconfig updates for v5.19 - Enable support for the Renesas RZ/V2L SoC and the Maxim MAX96712 Quad GMSL2 Deserializer in the arm64 defconfig, - Refresh shmobile_defconfig for v5.18-rc1. * tag 'renesas-arm-defconfig-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: defconfig: Refresh for v5.18-rc1 arm64: defconfig: Enable Maxim MAX96712 Quad GMSL2 Deserializer support arm64: defconfig: Enable ARCH_R9A07G054 Link: https://lore.kernel.org/r/cover.1650638503.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03arm: nomadik: drop selecting obsolete CLKSRC_NOMADIK_MTU_SCHED_CLOCKLukas Bulwahn
Commit 85b6fcadcf66 ("clocksource/drivers/ux500: Drop Ux500 custom SCHED_CLOCK") removes a sched_clock workaround and its corresponding config CLKSRC_NOMADIK_MTU_SCHED_CLOCK. Since then, selecting CLKSRC_NOMADIK_MTU_SCHED_CLOCK in ./arch/arm/mach-nomadik/Kconfig has no effect and ./scripts/checkkconfigsymbols.py warns: CLKSRC_NOMADIK_MTU_SCHED_CLOCK Referencing files: arch/arm/mach-nomadik/Kconfig Simply drop selecting the obsolete CLKSRC_NOMADIK_MTU_SCHED_CLOCK. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220410145623.2620380-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03ARM: config: Refresh IXP4xx config after multiplatformLinus Walleij
After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03ARM: dts: dm81xx: use new 'dma-channels/requests' propertiesKrzysztof Kozlowski
The '#dma-channels' and '#dma-requests' properties were deprecated in favor of these defined by generic dma-common DT bindings. Add new properties while keeping old ones for backwards compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-Id: <20220503065201.51818-7-krzysztof.kozlowski@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: am33xx: use new 'dma-channels/requests' propertiesKrzysztof Kozlowski
The '#dma-channels' and '#dma-requests' properties were deprecated in favor of these defined by generic dma-common DT bindings. Add new properties while keeping old ones for backwards compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-Id: <20220503065201.51818-5-krzysztof.kozlowski@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKSEL1_EMU clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKSEL_PER clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_ICLKEN_PER clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_FCLKEN_PER clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_FCLKEN_CAM clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKSEL_DSS clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_FCLKEN_DSS clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKOUT_CTRL clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKSEL1_PLL clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKSEL_WKUP clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_ICLKEN_WKUP clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_FCLKEN_WKUP clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKSEL_CORE clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_ICLKEN3_CORE clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_ICLKEN1_CORE clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 crypto accelerator clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_FCLKEN1_CORE clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CONTROL_DEVCONF1 clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CONTROL_DEVCONF0 clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.51.0) at 2026-11-05 09:14:25 +0000