| Age | Commit message (Collapse) | Author |
|---|
|
Fix a capitalization typo.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Kbuild cleans up files listed in 'targets'.
'piggy_data' is already added to 'targets' a few lines above.
Adding it to 'clean-files' is redundant.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
These are leds on the IBM proprietary PCIE cards called cable cards.
Cable cards have 2 ports on them and each port has an indicator led.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-7-joel@jms.id.au
|
|
This commit adds indicator leds for vrms, processors, opencapi
connectors, tpm, planar, power distribution card and dasd
backplane and are driven by PIC16F882.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-6-joel@jms.id.au
|
|
These are dimm indicator leds driven by PIC16F882.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-5-joel@jms.id.au
|
|
These are pcie slot indicator leds driven by PCA9552.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-4-joel@jms.id.au
|
|
These are the indicator leds for nvme slots and fans and are
driven by PCA9552.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-3-joel@jms.id.au
|
|
These are the system level indicator leds that are driven by
PCA9551 connected to the Operator Panel.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-2-joel@jms.id.au
|
|
Setting assigned clock with a dependency on itself for k2g_clks
creates a circular dependency. Instead, Lets model the audio clock
as a assigned-clock configuration for mcasp and set it up as the
first clock assigned-clock to be satisfied. Following the standard
convention, we use null entries to indicate entries that doesn't need
to be programmed.
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
We currently use clocks as the node name for the node representing
TI-SCI clock nodes. This is better renamed to being clock-controller
as that is a better representative of the system controller function
as a clock controller for the SoC.
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
Lets rename the node name of TI-SCI node to be system-controller as it
is a better standardized name for the function that TI-SCI plays in
the SoC.
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
Rename message-manager instance node name to be better aligned with
current style of device tree nodes for mailboxes.
Reviewed-by: Tero Kristo <kristo@kernel.org>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
1. Reorder interrupts
2. Fix typo: s/spi_lr_overhead/spi_lr_overread/
3. Rename node: s/spi-nor@0/flash@0/
This fixes:
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi@18029200: interrupt-names: 'oneOf' conditional failed, one must be fixed:
['spi_lr_fullness_reached', 'spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted'] is too long
Additional items are not allowed ('spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted' were unexpected)
'mspi_done' was expected
'spi_l1_intr' was expected
'mspi_halted' was expected
'spi_lr_fullness_reached' was expected
'spi_lr_session_aborted' was expected
'spi_lr_impatient' was expected
'spi_lr_session_done' was expected
'spi_lr_overread' was expected
From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi-nor@0: $nodename:0: 'spi-nor@0' does not match '^flash(@.*)?$'
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
GEHC CS ONE (codename is PPD), has multiple microcontrollers connected
via UART controlling. UART2 is connected to an on-board microcontroller
at 19200 baud, which constantly pushes critical data (so aging character
detect interrupt will never trigger). This data must be processed at
50-200 Hz, so UART should return data in less than 5-20ms. With 1024
byte DMA buffer (and a constant data stream) the read operation instead
needs 1024 byte / 19200 baud = 53.333ms, which is way too long (note:
Worst case would be remote processor sending data with short pauses <=
7 characters, which would further increase this number). The current
downstream kernel instead configures 24 bytes resulting in 1.25ms, but
that is obviously not sensible for normal UART use cases and cannot be
used as new default.
The same device also has another microcontroller with a 4M baud connected
to UART5 exchanging lots of data. For this the same mechanism can be used
to increase the buffer size (downstream uses 4K instead of the default 1K)
with potentially slightly reduced buffer count. At this baud rate latency
is not an issue (4096 byte / 4M baud = 0.977 ms). Before increasing the
default buffer count from 4 to 16 in 76c38d30fee7, this was required to
avoid data loss. With the changed default it's a performance optimization.
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
[replace commit message]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210430175038.103226-3-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In v5.13 the DRM driver gained support for using a phandle to the SCU,
instead of matching on the scu compatible.
Link: https://lore.kernel.org/r/20210603064536.165297-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
These LEDs are directly connected to the BMC's GPIO bank
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The 4U fans do not need a different "tach-pulses" property than the 2U
machine. In addition, the "maxim,fan-dual-tach" property does not exist
upstream yet, so it should also be removed.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Correct two PCA chips which were placed on the wrong I2C bus and
address.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The review process of rockchip-usb-phy.yaml was not finished
when the patch in the link below was already applied.
Remove the unneeded #phy-cells property.
https://lore.kernel.org/r/20210512122346.9463-4-jbx6244@gmail.com
Fixes: 6e4e4e2a2558 ("ARM: dts: rockchip: move and restyle grf nodes rk3066/rk3188")
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210603121010.4315-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210601164800.7670-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Aspeed AST2600 u-boot requires 600KiB+ flash space. Sharing the same
openbmc-flash-layout-64.dtsi requires to resize the flash partition.
The updated flash layout as follows:
- u-boot: 896 KiB
- u-boot-env: 128 KiB
- kernel: 9MiB
- rofs: 32 MiB
- rwfs: 22 MiB
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210316085932.2601-1-troy_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
As the 32MB flash layout will soon be exhausted, switch to 64MB layout.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-4-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Enable PSU support on Ampere's Mt. Jade BMC.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Enable OCP card support on Ampere's Mt. Jade BMC.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-2-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Most of the aspeed boards have copied the 'earlyprink' string in
the bootargs. However, there's no earlyprink driver configured in the
defconfigs, so this does nothing.
A combination of setting stdout in the chosen node and adding earlycon
to bootargs causes early serial output to appear early. This changes all
boards to use this option.
The console=ttyS4,115200 option is still required, as this is used by
the run time uart driver.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Alexander Filippov <a.filippov@yadro.com>
Link: https://lore.kernel.org/r/20210526051220.136432-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
AST2600 supports 2 SGPIO master interfaces and 2 SGPIO slave interfaces.
Currently, only SGPIO master 1 and SGPIO slve 1 in the pinctrl dtsi.
SGPIO master 2 and slave 2 should be added in pinctrl dtsi as well.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210525055308.31069-3-steven_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Fix pinctrl muxing, PD28, PD29 and PD31 can be muxed to peripheral A. It
allows to use SCK0, SCK1 and SPI0_NPCS2 signals.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: 679f8d92bb01 ("ARM: at91/dt: sama5d4: add pioD pin mux mask and enable pioD")
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20191025084210.14726-1-ludovic.desroches@microchip.com
|
|
Prevent warning seen with "make dtbs_check W=1" command:
Warning (avoid_unnecessary_addr_size): /soc/timers@40001c00: unnecessary
address-cells/size-cells without "ranges" or child "reg" property
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
This prevent warning observed with "make dtbs_check W=1"
Warning (simple_bus_reg): /soc/rcc@40023810: simple-bus unit address format
error, expected "40023800"
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Fix following warning observed with "make dtbs_check W=1" command.
It concerns f429 eval and disco boards, f769 disco board.
Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name,
but no reg or ranges property
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The microSD card detect pin is physically connected to the MPU pin PI3.
The Device Tree configuration of the card detect pin was wrong—it was
set to pin PB7 instead. If such configuration was used, the kernel would
hang on “Waiting for root device” when booting from a microSD card.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Configure qspi's mdma from buffer transfer (max 128 bytes) to
block transfer (max 64K bytes).
mtd_speedtest shows that write throughtput increases :
- from 734 to 782 KiB/s (~6.5%) with s25fl512s SPI-NOR.
- from 4848 to 5319 KiB/s (~9.72%) with Micron SPI-NAND.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Fix make dtbs_check warning:
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml:0:0: /soc/i2c@40015000/polytouch@38: failed to match any schema with compatible: ['edt,edt-ft5x06']
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Fix make dtbs_check warning:
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: gpio-keys-polled: '#address-cells' is a dependency of '#size-cells'
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: gpio-keys: '#address-cells' is a dependency of '#size-cells'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Enable the NAND + USB devices for the MikroTik RB3011 platform now
they're in the main IPQ806x DT.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Link: https://lore.kernel.org/r/1e5c89ba0d2491ca374f10e0446e21d0e42afd34.1621531633.git.noodles@earth.li
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This adds the L2CC IPC resource and RPM devices to the IPQ8064 device
tree.
Tested on a Mikrotik RB3011.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Link: https://lore.kernel.org/r/a99eb2a27214b8f41070d7f1faec591e35666b21.1621531633.git.noodles@earth.li
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Link: https://lore.kernel.org/r/ad2121defc539abdb339b23eef80a8930b5f086e.1621531633.git.noodles@earth.li
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Link: https://lore.kernel.org/r/f7ebf47ca9e7e973e696e6b9b4fff3a2ac5da40d.1621531633.git.noodles@earth.li
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Now the ADM driver is in mainline add the appropriate definitions for it
and the NAND controller to get NAND working on IPQ806x platforms,
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Link: https://lore.kernel.org/r/17f88a26860f5976ad08dd3c12ea079ba474b6fd.1621531633.git.noodles@earth.li
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
As the back camera is not implemented disable the second pair of fimc
child nodes as they are not functional. This prevents creating the
associated /dev/videoX devices.
Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
Link: https://lore.kernel.org/r/20210530105535.4165-1-timon.baetz@protonmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
The Microchip LAN8710Ai PHY requires XTAL1/CLKIN external clock to be
enabled when the nRST is toggled according to datasheet Microchip
LAN8710A/LAN8710Ai DS00002164B page 35 section 3.8.5.1 Hardware Reset:
"
A Hardware reset is asserted by driving the nRST input pin low. When
driven, nRST should be held low for the minimum time detailed in
Section 5.5.3, "Power-On nRST & Configuration Strap Timing," on page
59 to ensure a proper transceiver reset. During a Hardware reset, an
external clock must be supplied to the XTAL1/CLKIN signal.
"
This is accidentally fulfilled in the current setup, where ETHCK_K is used
to supply both PHY XTAL1/CLKIN and is also fed back through eth_clk_fb to
supply ETHRX clock of the DWMAC. Hence, the DWMAC enables ETHRX clock,
that has ETHCK_K as parent, so ETHCK_K clock are also enabled, and then
the PHY reset toggles.
However, this is not always the case, e.g. in case the PHY XTAL1/CLKIN
clock are supplied by some other clock source than ETHCK_K or in case
ETHRX clock are not supplied by ETHCK_K. In the later case, ETHCK_K would
be kept disabled, while ETHRX clock would be enabled, so the PHY would
not be receiving XTAL1/CLKIN clock and the reset would fail.
Improve the DT by adding the PHY clock phandle into the PHY node, which
then also requires moving the PHY reset GPIO specifier in the same place
and that then also requires correct PHY reset GPIO timing, so add that
too.
A brief note regarding the timing, the datasheet says the reset should
stay asserted for at least 100uS and software should wait at least 200nS
after deassertion. Set both delays to 500uS which should be plenty.
Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
dwmac-sun8i supports v3s and
Licheepi-zero Dock provides an ethernet port
furthermore, align nodes in alphabetical order
Signed-off-by: Andreas Rehn <rehn.andreas86@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210525173159.183415-1-rehn.andreas86@gmail.com
|
|
The ACTMON module monitors activity of memory clients and then devfreq
driver makes decisions about a required memory frequency based on info
from ACTMON. Add ACTMON device to the thermal zone of Ouya in order to
use it as a cooling device which throttles memory freq on overheat.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The ACTMON module monitors activity of memory clients and then devfreq
driver makes decisions about a required memory frequency based on info
from ACTMON. Add ACTMON device to the thermal zone of Nexus 7 in order
to use it as a cooling device which throttles memory freq on overheat.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The ACTMON module monitors activity of memory clients and decisions
about a minimum required memory frequency are made based on info from
ACTMON. Add cooling cells to ACTMON device-tree node in order to turn
it into a cooling device that will throttle memory freq on overheat.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The 3v3 regulator GPIO is GP6 and not GP7, which is the DDR regulator.
Both regulators are always-on, nevertheless the DT model needs to be
corrected, fix it.
Reported-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The bq27541 Linux kernel driver will try to reprogram controller based
on the values from monitored-battery node, but it fails to do so because
controller was locked by manufacturer. Still this is a very undesirable
behaviour, hence let's remove the optional battery node.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Remove unused thermal zone just to clean up device-tree and set critical
temperature further apart from the passive cooling trip point since
during or thermal testing of Asus Transformer devices we found that CPU
could reach the critical temperature in a certain kernel configurations
for a brief moment if critical trip point is set close to the passive
trip point and then device will be immediately shut off without getting
a chance to cool down using passive cooling.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add i2c-thermtrip node which enables emergency shutdown by PMC on
SoC die overheat detected by TSENSOR.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add thermal zone with a passive cooling trip for CPU. Attach it to the
LM90 sensor which monitors CPU temperature. Now CPU frequencies will be
throttled once trip point is reached, preventing critical overheat.
Tested-by: Agneli <poczt@protonmail.ch>
Tested-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
