| Age | Commit message (Collapse) | Author |
|
Merge series from Le Qi <le.qi@oss.qualcomm.com>:
This patch series adds support for the QCS615 sound card:
- Updates device tree bindings for SM8250 to include QCS615.
- Adds QCS615 support in the SC8280XP ASoC driver.
|
|
Add a device tree binding for the QIXIS FPGA based GPIO controller.
Depending on the board, the QIXIS FPGA exposes registers which act as a
GPIO controller, each with 8 GPIO lines of fixed direction.
Since each QIXIS FPGA layout has its particularities, add a separate
compatible string for each board/GPIO register combination supported.
Since these GPIO controllers are trivial, make use of the newly added
trivial-gpio.yaml file instead of creating an entirely new one.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Convert amd,xgbe-seattle-v1a binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251013213049.686797-2-robh@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-10-14
The first 2 paches are by Celeste Liu and target the gS_usb driver.
The first patch remove the limitation to 3 CAN interface per USB
device. The second patch adds the missing population of
net_device->dev_port.
The next 4 patches are by me and fix the m_can driver. They add a
missing pm_runtime_disable(), fix the CAN state transition back to
Error Active and fix the state after ifup and suspend/resume.
Another patch by me targets the m_can driver, too and replaces Dong
Aisheng's old email address.
The next 2 patches are by Vincent Mailhol and update the CAN
networking Documentation.
Tetsuo Handa contributes the last patch that add missing cleanup calls
in the NETDEV_UNREGISTER notification handler.
* tag 'linux-can-fixes-for-6.18-20251014' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: j1939: add missing calls in NETDEV_UNREGISTER notification handler
can: add Transmitter Delay Compensation (TDC) documentation
can: remove false statement about 1:1 mapping between DLC and length
can: m_can: replace Dong Aisheng's old email address
can: m_can: fix CAN state in system PM
can: m_can: m_can_chip_config(): bring up interface in correct state
can: m_can: m_can_handle_state_errors(): fix CAN state transition to Error Active
can: m_can: m_can_plat_remove(): add missing pm_runtime_disable()
can: gs_usb: gs_make_candev(): populate net_device->dev_port
can: gs_usb: increase max interface to U8_MAX
====================
Link: https://patch.msgid.link/20251014122140.990472-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce AN7583 NPU support to Airoha EN7581 NPU device-tree bindings.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251013-airoha-npu-7583-v3-1-00f748b5a0c7@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CMD-DB
Currently, CMD-DB names for RPMH regulators follow this format:
`^(smps|ldo|bob|vs)[a-n][1-9][0-9]?$`
Here, the `[a-n]` value is read from the `pmic-id` DT property,
which is unique to each PMIC present on the board.
Note that in this older CMD-DB name format the SPMI bus on which
a particular PMIC regulator exists was not apparent from its
CMD-DB name.
New targets like Glymur, where we have multiple SPMI buses,
overcome this limitation by following a new CMD-DB name format:
`^(L|S|B)[1-9][0-9]?[A-N]_E[0-3]$`
Here `[A-N]_E[0-3]` part will now be read from the `pmic-id` DT
prop and it includes the SPMI bus id `[0-3]` as well.
However, the PMIC ID part `[A-N]` of the CMD-DB name is now
unique only to the SPMI bus that the PMIC regulator is present
on. which means `L1B_E0` and `L1B_E1` are both possible CMD-DB
names for two different regulator LDOs present on two different
SPMI buses (bus id 0 and 1) on the same board.
Note that since the new `pmic-id` DT property is a combo of
PMIC ID and SPMI bus ID, so its still unique to each PMIC
present on the board.
Update the `pmic-id` property pattern information to reflect this
change in the driver handling to support this new CMD-DB naming
format while maintaining backward compatiblilty with old CMD-DB
naming format which is still supported for older/existing
targets.
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20250918-glymur-rpmh-regulator-driver-v3-2-184c09678be3@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add rpmh-regulator driver compatibles strings for below PMICs:
- PMH0101
- PMH0104
- PMH0110
- PMCX0102
Also add the supply name properties for the regulators
present on these PMICs.
Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20250918-glymur-rpmh-regulator-driver-v3-1-184c09678be3@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible string fsl,imx-audio-tlv320 to fix below CHECK_DTBS warning:
arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dtb: /sound: failed to match any schema with compatible: ['fsl,imx-audio-tlv320']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251010160321.2130093-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for mp9945 device from Monolithic Power Systems, Inc.
(MPS) vendor. This is a single phase digital step down converter.
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Link: https://lore.kernel.org/r/20251009205458.396368-2-chou.cosmo@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add dt-bindings for MPS mp9945 controller.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Link: https://lore.kernel.org/r/20251009205458.396368-1-chou.cosmo@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert APM X-Gene slimpro-hwmon binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251013213127.692373-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add interrupt property to document the SMBALERT pin functionality for
fault condition signal.
Suggested-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251013-upstream-max17616-v1-1-0e15002479c3@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The board has a similar sensor configuration as the ROG STRIX X870E-E
GAMING WIFI, with an additional temperature sensor header.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251003081002.1013313-3-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Added support for Pro WS TRX50-SAGE WIFI motherboard.
Signed-off-by: Paul Heneghan <paul@networks-extra.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251003081002.1013313-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
ADPM12200 is a quarter brick DC/DC Power Module. It is a high power
non-isolated converter capable of delivering regulated 12V with
continuous power level of 2000W. Uses PMBus.
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://lore.kernel.org/r/20251001-hwmon-next-v1-2-f8ca6a648203@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Since fan properties can include reg, the fan controller should be
able to specify address-cells and size-cells properties and use
an addressed fan child node.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251001144441.310950-6-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The binding for the max31785 is the same as the max31790, so just add
some compatible strings for the max31785 chip.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251001144441.310950-5-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add Murata ncp18wm474 [1] NTC to the ntc-thermistor binding.
[1] https://www.murata.com/en-eu/api/pdfdownloadapi?cate=&partno=NCP18WM474E03RB
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251001-ntc-thermistor-ncp18wm474-v1-2-2c64b9b509ff@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for MAX17616/MAX17616A current-limiter with
overvoltage/surge, undervoltage, reverse polarity, loss of ground
protection with PMBus interface. The PMBus interface allows monitoring
of input/output voltages, output current and temperature.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Link: https://lore.kernel.org/r/20250930-upstream-max17616-v1-2-1525a85f126c@analog.com
[groeck: Fixed htmldocs 'WARNING: Title underline too short'
as reported by Kriish Sharma <kriish.sharma2006@gmail.com>]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
auxdisplay devices"
Jean-François Lessard <jefflessard3@gmail.com> says:
This series modernizes the auxdisplay line display (linedisp) library to
enable seamless integration with auxdisplay parent devices while
maintaining backward compatibility.
The key improvement is adding attach/detach APIs that allow linedisp sysfs
attributes to be bound directly to their parent auxdisplay devices avoiding
child device proliferation and enabling a uniform 7-segment userspace
interface across different driver architectures.
This series introduces attachment infrastructure for linedisp devices.
The first consumer of this API will be the TM16XX driver series.
See the related patch series:
auxdisplay: Add TM16xx 7-segment LED matrix display controllers driver
Changes include:
1. Encapsulate container_of() usage with to_linedisp() helper function for
cleaner context retrieval
2. Improve message display behavior with static padding when message length
is smaller than display width
3. Add 'num_chars' read-only attribute for userspace capability discovery
4. Add attach/detach API for sysfs attributes binding to parent devices
5. Document all linedisp sysfs attributes in ABI documentation
All existing linedisp_register() users remain unaffected. The new APIs
enable drivers like TM16XX to integrate 7-segment functionality within
their LED class device hierarchy while providing a uniform 7-segment API.
Thanks to Andy Shevchenko for early feedback and guidance.
Link: https://lore.kernel.org/r/20250918121321.116248-1-jefflessard3@gmail.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add a read-only 'num_chars' sysfs attribute to report display digit count.
The num_chars attribute provides essential capability information to
userspace applications that need to know display dimensions before writing
messages, complementing the existing message and scroll controls.
No functional changes to existing behavior.
Signed-off-by: Jean-François Lessard <jefflessard3@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add ABI documentation for sysfs attributes provided by the line-display
auxdisplay library module. These attributes enable text message display and
configuration on character-based auxdisplay devices.
Documents previously undocumented attributes:
- message, scroll_step_ms (introduced in v5.16)
- map_seg7, map_seg14 (introduced in v6.9)
The line-display library is used by multiple auxdisplay drivers and
can expose these attributes either on linedisp.N child devices or
directly on parent auxdisplay devices.
Signed-off-by: Jean-François Lessard <jefflessard3@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add a new sysctl to control how often a queue reselection
can happen even if a flow has a persistent queue of skbs
in a Qdisc or NIC queue.
A value of zero means the feature is disabled.
Default is 1000 (1 second).
This sysctl is used in the following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251013152234.842065-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add optional clock for OSC_IN and fix the below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dtb: switch@0 (nxp,sja1105q): Unevaluated properties are not allowed ('clocks' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251010183418.2179063-1-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from "Sheetal ." <sheetal@nvidia.com>:
Add device tree support for tegra264 audio subsystem including:
- Binding update for
- 64-channel ADMA controller
- 32 RX/TX ADMAIF channels
- tegra264-agic binding for arm,gic
- Add device tree nodes for
- APE subsystem (ACONNECT, AGIC, ADMA, AHUB and children (ADMAIF, I2S,
DMIC, DSPK, MVC, SFC, ASRC, AMX, ADX, OPE and Mixer) nodes
- HDA controller
- sound
Note:
The change is dependent on https://patchwork.ozlabs.org/project/linux-tegra/patch/20250818135241.3407180-1-thierry.reding@gmail.com/
...
Changes in V2:
- Update the allOf condition in Patch 2/4.
sheetal (4):
dt-bindings: dma: Update ADMA bindings for tegra264
dt-bindings: sound: Update ADMAIF bindings for tegra264
dt-bindings: interrupt-controller: arm,gic: Add tegra264-agic
arm64: tegra: Add tegra264 audio support
.../bindings/dma/nvidia,tegra210-adma.yaml | 15 +-
.../interrupt-controller/arm,gic.yaml | 1 +
.../sound/nvidia,tegra210-admaif.yaml | 106 +-
.../arm64/boot/dts/nvidia/tegra264-p3971.dtsi | 106 +
arch/arm64/boot/dts/nvidia/tegra264.dtsi | 3190 +++++++++++++++++
5 files changed, 3377 insertions(+), 41 deletions(-)
--
2.34.1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
- Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
- Avoid a BUG_ON when opening a file on a maliciously corrupted file
system
- Avoid mm warnings when freeing a very large orphan file metadata
- Avoid a theoretical races between metadata writeback and checkpoints
(it's very hard to hit in practice, since the race requires that the
writeback take a very long time)
* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
ext4: free orphan info with kvfree
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
ext4, doc: fix and improve directory hash tree description
ext4: wait for ongoing I/O to complete before freeing blocks
jbd2: ensure that all ongoing I/O complete before freeing blocks
|
|
Convert the aspeed,ast2400-ibt-bmc binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20251014152948.3782738-1-robh@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
Convert the nuvoton,npcm750-kcs-bmc binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20251014152935.3782463-1-robh@kernel.org>
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
While reading the documentation, I saw a exit code I could not grep for, to
figure out it has a slightly different name.
Fix that name in documentation so it points to the right exit code.
Signed-off-by: Leonardo Bras <leo.bras@arm.com>
Link: https://lore.kernel.org/r/20251014152802.13563-1-leo.bras@arm.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Convert APM X-Gene slimpro-mbox binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The NanoPi R76S (as "R76S") is an open-sourced mini IoT gateway
device with two 2.5G, designed and developed by FriendlyElec.
Add devicetree binding documentation for the FriendlyElec NanoPi R76S
board.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The big picture section of 2.Process.rst currently hardcodes major
version number to 5 since fb0e0ffe7fc8e0 ("Documentation: bring process
docs up to date"). As it can get outdated when it is actually
incremented (the recent is 6 and will be 7 in the near future),
arbitrarily bump it to 9, giving a headroom for a decade.
Note that the version number examples are kept to illustrate the
numbering scheme.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
[jc: tweaked the initial 9.x mention slightly]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250922074219.26241-1-bagasdotme@gmail.com>
|
|
Sync the ja_JP translation with the following upstream commits:
commit 8401aa1f5997 ("Documentation/SubmittingPatches: describe the Fixes: tag")
commit 19c3fe285cba ("docs: Explicitly state that the 'Fixes:' tag shouldn't split lines")
commit 5b5bbb8cc51b ("docs: process: Add an example for creating a fixes tag")
commit 6356f18f09dc ("Align git commit ID abbreviation guidelines and checks")
The mix of plain text and reST markup for ``git bisect`` is intentional to
align with the eventual reST conversion.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250924192426.2743495-1-weibu@redadmin.org>
|
|
The term "userspace" should be a single word. Fix the typo
"userpace" accordingly.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250926190019.41788-1-weibu@redadmin.org>
|
|
Since the Handover Protocol was deprecated, the recommended approach is
to provide an initrd using a UEFI boot service with the
LINUX_EFI_INITRD_MEDIA_GUID device path. Documentation for the new
approach has been no more than an admonition with a link to an existing
implementation.
Provide a short explanation of this functionality, to ease future
implementations without having to reverse engineer existing ones.
[Bagas: Don't use :ref: link to EFI stub documentation and refer to
OVMF/edk2 implementation]
Signed-off-by: Hugo Osvaldo Barrera <hugo@whynothugo.nl>
Link: https://lore.kernel.org/r/20250428131206.8656-2-hugo@whynothugo.nl
Co-developed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251013085718.27085-1-bagasdotme@gmail.com>
|
|
Remove files documentation from stih407-c8sectpfe driver.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: slight change of the Subject, mention doc changes as well]
|
|
Shreeya no longer works at Collabora, set Dmitry as maintainer of
the Synopsys HDMI RX binding.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Document the MIPI DSI controller for Rockchip RK3368.
Signed-off-by: WeiHao Li <cn.liweihao@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250905025632.222422-9-cn.liweihao@gmail.com
|
|
Convert APM X-Gene slimpro-i2c binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Backmerging to bring in 6.18-rc1.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Pull in outstanding SCSI fixes for 6.18.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Back in 2021, support for CAN TDC was added to the kernel in series [1]
and in iproute2 in series [2]. However, the documentation was never
updated.
Add a new sub-section under CAN-FD driver support to document how to
configure the TDC using the "ip tool".
[1] add the netlink interface for CAN-FD Transmitter Delay Compensation (TDC)
Link: https://lore.kernel.org/all/20210918095637.20108-1-mailhol.vincent@wanadoo.fr/
[2] iplink_can: cleaning, fixes and adding TDC support
Link: https://lore.kernel.org/all/20211103164428.692722-1-mailhol.vincent@wanadoo.fr/
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251013-can-fd-doc-v2-2-5d53bdc8f2ad@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The CAN-FD section of can.rst still states that there is a 1:1 mapping
between the Classical CAN DLC and its length. This is only true for
the DLC values up to 8. Beyond that point, the length remains at 8.
For reference, the mapping between the CAN DLC and the length is given
in below table [1]:
DLC value CBFF and CEFF FBFF and FEFF
[decimal] [byte] [byte]
----------------------------------------------
0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 8 12
10 8 16
11 8 20
12 8 24
13 8 32
14 8 48
15 8 64
Remove the erroneous statement. Instead just state that the length of
a Classical CAN frame ranges from 0 to 8.
[1] ISO 11898-1:2024, Table 5 -- DLC: coding of the four LSB
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251013-can-fd-doc-v2-1-5d53bdc8f2ad@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
GICv5 hosts optionally include FEAT_GCIE_LEGACY, which allows them to
execute GICv3-based VMs on GICv5 hardware. Update the GICv3
documentation to reflect this now that GICv3 guests are supports on
compatible GICv5 hosts.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM rejects calls to KVM_{GET,SET}_VCPU_EVENTS for an uninitialized vCPU
as of commit cc96679f3c03 ("KVM: arm64: Prevent access to vCPU events
before init"). Update the corresponding API documentation.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Ensure my CI has a sensible baseline.
|
|
Add a compatible for the LPASS LPI pin controller on QCM2290. It seems
to be compatible with sm6115 LPASS pinctrl.
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Srinivas Kandagatla <srini@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Update the ADMAIF bindings as tegra264 supports 64 channels, which includes
32 RX and 32 TX channels.
Signed-off-by: sheetal <sheetal@nvidia.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250929105930.1767294-3-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
IPQ5332 contains the QPIC-SPI-NAND flash controller which is the same as
the one found in IPQ9574. So let's document the IPQ5332 compatible and
use IPQ9574 as the fallback.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20251008090413.458791-3-quic_mdalam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
IPQ5424 contains the QPIC-SPI-NAND flash controller which is the same as
the one found in IPQ9574. So let's document the IPQ5424 compatible and
use IPQ9574 as the fallback.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20251008090413.458791-2-quic_mdalam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|