| Age | Commit message (Collapse) | Author |
|
Documentation for GFS2 is scattered in three docs that are in
Documentation/filesystems/ directory. As these docs are standing out as
a group, move them into separate gfs2/ subdirectory.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Add initial documentation for all recently added Xe driver
specific SR-IOV sysfs files located under device/sriov_admin.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-18-michal.wajdeczko@intel.com
|
|
Add compatible for Agilex5 SoCFPGA 013b board.
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Fix the following DT schema check warning:
./Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml:103:1: [warning] too many blank lines (2 > 1) (empty-lines)
One newline is enough. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251029194210.129326-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. It became slightly bigger than usual due
to timing issues (holidays, etc), but all changes are rather
device-specific fixes, so not really worrisome.
- ASoC Cirrus codec fixes for AMD
- Various fixes for ASoC Intel AVS, Qualcomm, SoundWire, FSL,
Mediatek, Renesas
- A few HD-audio quirks, and USB-audio regression fixes for Presonus"
* tag 'sound-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda/realtek: Enable mic on Vaio RPL
ASoC: dt-bindings: pm4125-sdw: correct number of soundwire ports
ASoC: renesas: rz-ssi: Use proper dma_buffer_pos after resume
ASoC: soc_sdw_utils: remove cs42l43 component_name
ASoC: fsl_sai: Fix sync error in consumer mode
ASoC: Fix build for sdw_utils
ALSA: hda/realtek: Fix mute led for HP Victus 15-fa1xxx (MB 8C2D)
ASoC: rt721: fix prepare clock stop failed
ALSA: usb-audio: don't log messages meant for 1810c when initializing 1824c
ASoC: mediatek: Fix double pm_runtime_disable in remove functions
ASoC: fsl_micfil: correct the endian format for DSD
ASoC: fsl_sai: fix bit order for DSD format
ASoC: Intel: avs: Use snd_codec format when initializing probe
ASoC: Intel: avs: Disable periods-elapsed work when closing PCM
ASoC: Intel: avs: Unprepare a stream when XRUN occurs
ASoC: sdw_utils: add name_prefix for rt1321 part id
ASoC: qdsp6: q6asm: do not sleep while atomic
ASoC: Intel: soc-acpi-intel-ptl-match: Remove cs42l43 match from sdw link3
ASOC: max98090/91: fix for filter configuration: AHPF removed DMIC2_HPF added
ASoC: amd: acp: Add ACP7.0 match entries for cs35l56 and cs42l43
...
|
|
Kaanapali SoC
Document the RPMh Network-On-Chip Interconnect of the Kaanapali platform.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251031-knp-interconnect-v4-1-568bba2cb3e5@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc4).
No conflicts, adjacent changes:
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
ded9813d17d3 ("net: stmmac: Consider Tx VLAN offload tag length for maxSDU")
26ab9830beab ("net: stmmac: replace has_xxxx with core_type")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
|
|
Add device tree bindings for the Tianma TL121BVMS07-00 12.1-inch
MIPI-DSI TFT LCD panel. The panel is based on the Ilitek IL79900A
controller.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251031100447.253164-2-yelangyan@huaqin.corp-partner.google.com
|
|
The AMD Seattle CCP is behind an IOMMU and has 4 entries, so add
the 'iommus' property.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add xe_gt_throttle under the "GT Frequency Management" and improve the
narrative making sure the documentation for both *_freq and throttle/*
attributes follow the same style.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-6-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
This reverts commit d3e7609c6e5ec92587ed1043a985749d22cc78d1.
The commit cause a warning:
Documentation/networking/skbuff.rst:34: WARNING: duplicate label crc, other instance in Documentation/translations/zh_CN/networking/skbuff.rst
And there's no simple way to keep the meaningful doc context and avoid the
warning, so, let's remove the doc.
Signed-off-by: Alex Shi <alexs@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless, Bluetooth and netfilter.
Current release - regressions:
- tcp: fix too slow tcp_rcvbuf_grow() action
- bluetooth: fix corruption in h4_recv_buf() after cleanup
Previous releases - regressions:
- mptcp: restore window probe
- bluetooth:
- fix connection cleanup with BIG with 2 or more BIS
- fix crash in set_mesh_sync and set_mesh_complete
- batman-adv: release references to inactive interfaces
- nic:
- ice: fix usage of logical PF id
- sfc: fix potential memory leak in efx_mae_process_mport()
Previous releases - always broken:
- devmem: refresh devmem TX dst in case of route invalidation
- netfilter: add seqadj extension for natted connections
- wifi:
- iwlwifi: fix potential use after free in iwl_mld_remove_link()
- brcmfmac: fix crash while sending action frames in standalone AP Mode
- eth:
- mlx5e: cancel tls RX async resync request in error flows
- ixgbe: fix memory leak and use-after-free in ixgbe_recovery_probe()
- hibmcge: fix rx buf avl irq is not re-enabled in irq_handle issue
- cxgb4: fix potential use-after-free in ipsec callback
- nfp: fix memory leak in nfp_net_alloc()"
* tag 'net-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
net: sctp: fix KMSAN uninit-value in sctp_inq_pop
net: devmem: refresh devmem TX dst in case of route invalidation
net: stmmac: est: Fix GCL bounds checks
net: stmmac: Consider Tx VLAN offload tag length for maxSDU
net: stmmac: vlan: Disable 802.1AD tag insertion offload
net/mlx5e: kTLS, Cancel RX async resync request in error flows
net: tls: Cancel RX async resync request on rcd_delta overflow
net: tls: Change async resync helpers argument
net: phy: dp83869: fix STRAP_OPMODE bitmask
selftests: net: use BASH for bareudp testing
net: mctp: Fix tx queue stall
net/mlx5: Don't zero user_count when destroying FDB tables
net: usb: asix_devices: Check return value of usbnet_get_endpoints
mptcp: zero window probe mib
mptcp: restore window probe
mptcp: fix MSG_PEEK stream corruption
mptcp: drop bogus optimization in __mptcp_check_push()
netconsole: Fix race condition in between reader and writer of userdata
Documentation: netconsole: Remove obsolete contact people
nfp: xsk: fix memory leak in nfp_net_alloc()
...
|
|
sa8775p
Add 'reg' and 'clocks' properties to enable QoS configuration. These
properties enable access to QoS registers and necessary clocks for
configuration.
QoS configuration is essential for ensuring that latency sensitive
components such as CPUs and multimedia engines receive prioritized
access to memory and interconnect resources. This helps to manage
bandwidth and latency across subsystems, improving system responsiveness
and performance in concurrent workloads.
Both 'reg' and 'clocks' properties are optional. If either is missing,
QoS configuration will be skipped. This behavior is controlled by the
'qos_requires_clocks' flag in the driver, which ensures that QoS
configuration is bypassed when required clocks are not defined.
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251001073344.6599-2-odelu.kukatla@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add compatibles for the Tegra210 Jetson Nano Developer Kits
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add a sysfs attribute `/sys/power/hibernate_compression_threads` to
allow runtime configuration of the number of threads used for
compressing and decompressing hibernation images.
The new sysfs interface enables dynamic adjustment at runtime:
# cat /sys/power/hibernate_compression_threads
3
# echo 4 > /sys/power/hibernate_compression_threads
This change provides greater flexibility for debugging and performance
tuning of hibernation without requiring a reboot.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
Link: https://patch.msgid.link/c68c62f97fabf32507b8794ad8c16cd22ee656ac.1761046167.git.luoxueqin@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The number of compression/decompression threads has a direct impact on
hibernate image generation and resume latency. Using more threads can
reduce overall resume time, but on systems with fewer CPU cores it may
also introduce contention and reduce efficiency.
Performance was evaluated on an 8-core ARM system, averaged over 10 runs:
Threads Hibernate(s) Resume(s)
--------------------------------
3 12.14 18.86
4 12.28 17.48
5 11.09 16.77
6 11.08 16.44
With 5–6 threads, resume latency improves by approximately 12% compared
to the default 3-thread configuration, with negligible impact on
hibernate time.
Introduce a new kernel parameter `hibernate_compression_threads=` that
allows users and integrators to tune the number of
compression/decompression threads at boot. This provides a way to
balance performance and CPU utilization across a wide range of hardware
without recompiling the kernel.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
Link: https://patch.msgid.link/f24b3ca6416e230a515a154ed4c121d72a7e05a6.1761046167.git.luoxueqin@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix typos in qaic.rst file.
Signed-off-by: Sourab Bera <quic_sourbera@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251024165749.821414-1-youssef.abdulrahman@oss.qualcomm.com
|
|
Add devicetree bindings for the AM67 based Kontron SMARC-sAM67
module.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251017135116.548236-2-mwalle@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Currently if a -ENOMEM from smc_wr_alloc_link_mem() is handled by
giving up and going the way of a TCP fallback. This was reasonable
before the sizes of the allocations there were compile time constants
and reasonably small. But now those are actually configurable.
So instead of giving up, keep retrying with half of the requested size
unless we dip below the old static sizes -- then give up! In terms of
numbers that means we give up when it is certain that we at best would
end up allocating less than 16 send WR buffers or less than 48 recv WR
buffers. This is to avoid regressions due to having fewer buffers
compared the static values of the past.
Please note that SMC-R is supposed to be an optimisation over TCP, and
falling back to TCP is superior to establishing an SMC connection that
is going to perform worse. If the memory allocation fails (and we
propagate -ENOMEM), we fall back to TCP.
Preserve (modulo truncation) the ratio of send/recv WR buffer counts.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20251027224856.2970019-3-pasic@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Think SMC_WR_BUF_CNT_SEND := SMC_WR_BUF_CNT used in send context and
SMC_WR_BUF_CNT_RECV := 3 * SMC_WR_BUF_CNT used in recv context. Those
get replaced with lgr->max_send_wr and lgr->max_recv_wr respective.
Please note that although with the default sysctl values
qp_attr.cap.max_send_wr == qp_attr.cap.max_recv_wr is maintained but
can not be assumed to be generally true any more. I see no downside to
that, but my confidence level is rather modest.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20251027224856.2970019-2-pasic@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add Kaanapali compatible consistent with CAMSS CCI interfaces.
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251028-add-support-for-camss-on-kaanapali-v4-1-7eb484c89585@oss.qualcomm.com
|
|
Add the msm8953 CCI device string compatible.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251028-msm8953-cci-v2-1-b5f9f7135326@lucaweiss.eu
|
|
Add compatible string for the PWRAP block on MT8189 SoC, which is
compatible with the one used on MT8195.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The "reg" in top-level has maxItems:2, thus repeating this in "if:then:"
blocks is redundant. Similarly number of items cannot be less than 1.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251027113107.75835-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Ajay Neeli <ajay.neeli@amd.com> says:
This patch series adds support for the UFS driver on the AMD Versal
Gen 2 SoC. It includes:
- Device tree bindings and driver implementation.
- Secure read support for the secure retrieval of UFS calibration
values.
The UFS host driver is based upon the Synopsis DesignWare (DWC) UFS
architecture, utilizing the existing UFSHCD_DWC and UFSHCD_PLATFORM
drivers.
Link: https://patch.msgid.link/20251021113003.13650-1-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Gen 2 SoC
Add devicetree document for UFS Host Controller on AMD Versal Gen 2 SoC.
This includes clocks and clock-names as mandated by UFS common bindings.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Co-developed-by: Ajay Neeli <ajay.neeli@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-2-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The ENETC with pseudo MAC is used to connect to the CPU port of the NETC
switch. This ENETC has a different PCI device ID, so add a standard PCI
device compatible string to it.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251029013900.407583-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the compatible string "nxp,imx94-netc-blk-ctrl" for i.MX94 platforms.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251029013900.407583-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the ability to append the incoming IP interface information to
ICMPv6 error messages in accordance with RFC 5837 and RFC 4884. This is
required for more meaningful traceroute results in unnumbered networks.
The feature is disabled by default and controlled via a new sysctl
("net.ipv6.icmp.errors_extension_mask") which accepts a bitmask of ICMP
extensions to append to ICMP error messages. Currently, only a single
value is supported, but the interface and the implementation should be
able to support more extensions, if needed.
Clone the skb and copy the relevant data portions before modifying the
skb as the caller of icmp6_send() still owns the skb after the function
returns. This should be fine since by default ICMP error messages are
rate limited to 1000 per second and no more than 1 per second per
specific host.
Trim or pad the packet to 128 bytes before appending the ICMP extension
structure in order to be compatible with legacy applications that assume
that the ICMP extension structure always starts at this offset (the
minimum length specified by RFC 4884).
Since commit 20e1954fe238 ("ipv6: RFC 4884 partial support for SIT/GRE
tunnels") it is possible for icmp6_send() to be called with an skb that
already contains ICMP extensions. This can happen when we receive an
ICMPv4 message with extensions from a tunnel and translate it to an
ICMPv6 message towards an IPv6 host in the overlay network. I could not
find an RFC that supports this behavior, but it makes sense to not
overwrite the original extensions that were appended to the packet.
Therefore, avoid appending extensions if the length field in the
provided ICMPv6 header is already filled.
Export netdev_copy_name() using EXPORT_IPV6_MOD_GPL() to make it
available to IPv6 when it is built as a module.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251027082232.232571-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the ability to append the incoming IP interface information to
ICMPv4 error messages in accordance with RFC 5837 and RFC 4884. This is
required for more meaningful traceroute results in unnumbered networks.
The feature is disabled by default and controlled via a new sysctl
("net.ipv4.icmp_errors_extension_mask") which accepts a bitmask of ICMP
extensions to append to ICMP error messages. Currently, only a single
value is supported, but the interface and the implementation should be
able to support more extensions, if needed.
Clone the skb and copy the relevant data portions before modifying the
skb as the caller of __icmp_send() still owns the skb after the function
returns. This should be fine since by default ICMP error messages are
rate limited to 1000 per second and no more than 1 per second per
specific host.
Trim or pad the packet to 128 bytes before appending the ICMP extension
structure in order to be compatible with legacy applications that assume
that the ICMP extension structure always starts at this offset (the
minimum length specified by RFC 4884).
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251027082232.232571-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao has been listed in MAINTAINERS as netconsole maintainer
since 7c938e438c56db ("MAINTAINERS: make Breno the netconsole
maintainer"), but the documentation says otherwise that bug reports
should be sent to original netconsole authors.
Remove obsolate contact info.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251028132027.48102-1-bagasdotme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PR_SET_L1D_FLUSH does not exist.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251015-l1d-flush-doc-v1-2-f8cefea3f2f2@google.com>
|
|
For PR_SPEC_STORE_BYPASS and PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE
means "disable the speculation bug" i.e. "enable the mitigation".
For PR_SPEC_L1D_FLUSH, PR_SPEC_DISABLE means "disable the mitigation".
This is not obvious, so document it.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251015-l1d-flush-doc-v1-1-f8cefea3f2f2@google.com>
|
|
Sasha has also maintaining stable branch in conjunction with Greg
since cb5d21946d2a2f ("MAINTAINERS: Add Sasha as a stable branch
maintainer"). Mention him in 2.Process.rst.
Cc: stable@vger.kernel.org
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251022034336.22839-1-bagasdotme@gmail.com>
|
|
http://www.uwsg.iu.edu/ doesn't seem to exist anymore.
I managed to find backups on archive.org, which helped me find
the right links on https://lore.kernel.org/.
http://freecode.com/projects/afio was also down, so I figured
it could be replaced with https://linux.die.net/man/1/afio.
Replace broken links to mailing list and aifo tool.
Signed-off-by: Nadav Tasher <tashernadav@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251025171625.33197-1-tashernadav@gmail.com>
|
|
Document the Synaptics TDDI (Touch/Display Integration) panel hardware.
Along with the MIPI-DSI panel, these devices also have an in-built LED
backlight device and a touchscreen, all packed together in a single chip.
Also, add compatibles for supported panels - TD4101 and TD4300. Both
have the '-panel' suffix so as to remove any ambiguity between the panel
and touchscreen chips.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251009-panel-synaptics-tddi-v5-1-59390997644e@disroot.org
|
|
ili9881c binding
Update the panel example in this DT schema to match requirements in binding
display/panel/ilitek,ili9881c.yaml . This fixes the following schema check
warnings:
"
/tmp/dtx/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.example.dtb: panel@0 (raspberrypi,dsi-7inch): compatible: ['raspberrypi,dsi-7inch'] is too short
from schema $id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml
/tmp/dtx/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.example.dtb: panel@0 (raspberrypi,dsi-7inch): 'power-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml
"
Fixes: c376a6943741 ("dt-bindings: display: bridge: renesas,dsi-csi2-tx: Allow panel@ subnode")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251029200519.214548-1-marek.vasut+renesas@mailbox.org
|
|
The Samsung ATNA40CT06 panel is a 16" AMOLED eDP panel. It is similar to
the ATNA33XC20 except that it is larger and has a different resolution.
It is found on Qualcomm Glymur CRD platform.
Raw panel edid:
00 ff ff ff ff ff ff 00 4c 83 a6 41 00 00 00 00
00 20 01 04 b5 22 16 78 03 0b d1 af 51 3d b6 23
0b 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 cb fe 40 64 b0 08 18 70 20 08
88 00 58 d7 10 00 00 1b cb fe 40 64 b0 08 c8 7a
20 08 88 00 58 d7 10 00 00 1b 00 00 00 fd 00 30
78 da da 42 01 00 00 00 00 00 00 00 00 00 00 02
00 00 00 00 19 96 c8 46 1c 5e c8 00 00 00 01 4c
70 20 79 02 00 20 00 0c ba 41 59 a6 41 00 00 00
00 00 16 00 21 00 1d 48 0d 98 08 40 0b 08 07 00
f2 ea 50 d7 d3 b6 3d 42 0b 01 45 54 40 5e d0 60
18 10 23 78 26 00 09 07 06 03 00 00 00 50 00 00
22 00 14 e7 f3 09 85 3f 0b 63 00 1f 00 07 00 07
07 17 00 07 00 07 00 81 00 1f 73 1a 00 00 03 03
30 78 00 a0 74 02 60 02 78 00 00 00 00 8d e3 05
80 00 e6 06 05 01 74 60 02 00 00 00 00 00 5f 90
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251028-drm-panel-samsung-add-atna60cl08-v1-1-73123789fcdb@linaro.org
|
|
Basic description for S6E3FC2X01 DDIC with attached panel AMS641RW.
Samsung AMS641RW is 6.41 inch, 1080x2340 pixels, 19.5:9 ratio panel
This panel has three supplies, while panel-simple-dsi is limited to one.
There is no user of this compatible, nor the compatible make sense.
Remove it from simple DSI panel definitions.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251023-s6e3fc2x01-v5-1-8f8852e67417@ixit.cz
|
|
The Cirrus CS4271 codec can use an external clock as an input Master
Clock. When no crystal is used, the CS4271 component considers its MCLK
pin as an input pin and expects the external clock connected to provide
the Master Clock.
This clock is not documented in the binding.
Add the missing clock.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251029093921.624088-4-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix reST warnings in
Documentation/admin-guide/pm/intel_pstate.rst caused by missing explicit
hyperlink labels for section titles.
Before this change, the following errors were printed during
`make htmldocs`:
Documentation/admin-guide/pm/intel_pstate.rst:401:
ERROR: Indirect hyperlink target (id="id6") refers to target
"passive mode", which is a duplicate, and cannot be used as a
unique reference.
Documentation/admin-guide/pm/intel_pstate.rst:517:
ERROR: Indirect hyperlink target (id="id9") refers to target
"active mode", which is a duplicate, and cannot be used as a
unique reference.
Documentation/admin-guide/pm/intel_pstate.rst:611:
ERROR: Indirect hyperlink target (id="id15") refers to target
"global attributes", which is a duplicate, and cannot be used as
a unique reference.
ERROR: Duplicate target name, cannot be used as a unique reference:
"passive mode", "active mode", "global attributes".
These errors occurred because the sections "Active Mode",
"Active Mode With HWP", "Passive Mode", and "Global Attributes"
did not define explicit hyperlink labels. As a result, Sphinx
auto-generated duplicate anchors when the same titles appeared
multiple times within the document.
Because of this, the generated HTML documentation contained
broken references such as:
`active mode <Active Mode_>`_
`passive mode <Passive Mode_>`_
`global attributes <Global Attributes_>`_
This patch adds explicit hyperlink labels for the affected sections,
ensuring all references are unique and correctly resolved.
After applying this patch, `make htmldocs` completes without
any warnings, and all hyperlinks in intel_pstate.html render properly.
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/20251029134737.42229-1-swarajgaikwad1925@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Document the Always-on Subsystem side channel on the Glymur SoC.
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251022-knp-soc-binding-v2-4-3cd3f390f3e2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document the Always-On Subsystem side channel on the Qualcomm Kaanapali
platform for communication with client found on the SoC such as
remoteprocs.
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251022-knp-soc-binding-v2-2-3cd3f390f3e2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For some reason we ended up limiting the number of soundwire ports to 2
in the bindings, the actual codec supports 4 rx and 5 tx ports.
Fixes: 88d0d17192c5 ("ASoC: dt-bindings: add bindings for pm4125 audio codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251029144636.357203-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch compatible from a const to an enum to accommodate both the vd55g1
and the vd65g4, which is the color variant.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Mention include/dt-bindings/media/video-interfaces.h in descriptions to
help avoid use hardcode in dts.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Convert nxp,tda1997x.txt to yaml format
Additional changes:
- update audio width to 8, 16, 24, 32.
- keep one example only.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Convert ti,tvp5150.txt to yaml format.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
[Sakari Ailus: Align the endpoint properties to the right column.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Document the Dongwoon Anatech DW9800K.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|