| Age | Commit message (Collapse) | Author |
|---|
|
Convert the Marvell AP80x System Controller binding to DT schema format.
There's not any specific compatible for the whole block which is a
separate problem, so just the child nodes are documented. Only the
pinctrl and clock child nodes need to be converted as the GPIO node
already has a schema.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20251014153040.3783896-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell CP110 System Controller binding to DT schema
format.
There's not any specific compatible for the whole block which is a
separate problem, so just the child nodes are documented. Only the
pinctrl and clock child nodes need to be converted as the GPIO node
already has a schema.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20251022165509.3917655-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the cznic,moxtet binding to DT schema format. It's a
straight-forward conversion.
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20251014153009.3783183-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
In Documentation/admin-guide/blockdev/zoned_loop.rst, add the
description of the zone_append and ordered_zone_append configuration
arguments of zloop "add" command (device creation).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
Sphinx reports htmldocs warnings:
Documentation/filesystems/nfs/nfsd-maintainer-entry-profile.rst:185: ERROR: Unknown target name: "nfsd". [docutils]
Documentation/filesystems/nfs/nfsd-maintainer-entry-profile.rst:188: ERROR: Unknown target name: "nfsdn". [docutils]
Documentation/filesystems/nfs/nfsd-maintainer-entry-profile.rst:192: ERROR: Unknown target name: "nfsd4m". [docutils]
These are due to Sphinx confusing function name prefixes for external
link syntax. Fix the warnings by inlining the prefixes.
Fixes: 3a1ce35030e1e0 ("NFSD: Add a subsystem policy document")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251117174218.29365f30@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add the Devicetree binding for the PCIe Root Complex found on the SpacemiT
K1 SoC. This Root Complex is derived from the Synopsys Designware PCIe IP.
It supports up to three PCIe ports operating at PCIe link speed up to 5
GT/sec. One of the ports uses a combo PHY, which is typically used to
support a USB3 port.
Signed-off-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Jason Montleon <jmontleo@redhat.com>
Tested-by: Johannes Erdfelt <johannes@erdfelt.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251113214540.2623070-4-elder@riscstar.com
|
|
resets
Power domains and resets should be required for PCI, so the proper SoC
supplies are turned on.
Fixes: 692eadd51698 ("dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-9-28c1f11599fe@linaro.org
|
|
resets
Commit b8d3404058a6 ("dt-bindings: PCI: qcom,pcie-sm8550: Move SM8550 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: b8d3404058a6 ("dt-bindings: PCI: qcom,pcie-sm8550: Move SM8550 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-8-28c1f11599fe@linaro.org
|
|
resets
Commit 88c9b3af4e31 ("dt-bindings: PCI: qcom,pcie-sm8450: Move SM8450 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 88c9b3af4e31 ("dt-bindings: PCI: qcom,pcie-sm8450: Move SM8450 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-7-28c1f11599fe@linaro.org
|
|
resets
Commit 2278b8b54773 ("dt-bindings: PCI: qcom,pcie-sm8350: Move SM8350 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 2278b8b54773 ("dt-bindings: PCI: qcom,pcie-sm8350: Move SM8350 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-6-28c1f11599fe@linaro.org
|
|
resets
Commit 4891b66185c1 ("dt-bindings: PCI: qcom,pcie-sm8250: Move SM8250 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 4891b66185c1 ("dt-bindings: PCI: qcom,pcie-sm8250: Move SM8250 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-5-28c1f11599fe@linaro.org
|
|
resets
Commit 51bc04d5b49d ("dt-bindings: PCI: qcom,pcie-sm8150: Move SM8150 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 51bc04d5b49d ("dt-bindings: PCI: qcom,pcie-sm8150: Move SM8150 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-4-28c1f11599fe@linaro.org
|
|
resets
Commit c007a5505504 ("dt-bindings: PCI: qcom,pcie-sc8280xp: Move
SC8280XP to dedicated schema") move the device schema to separate file,
but it missed a "if:not:...then:" clause in the original binding which
was requiring power-domains and resets for this particular chip.
Fixes: c007a5505504 ("dt-bindings: PCI: qcom,pcie-sc8280xp: Move SC8280XP to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-3-28c1f11599fe@linaro.org
|
|
resets
Commit 756485bfbb85 ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 756485bfbb85 ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-2-28c1f11599fe@linaro.org
|
|
resets
Commit 544e8f96efc0 ("dt-bindings: PCI: qcom,pcie-sa8775p: Move SA8775p
to dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 544e8f96efc0 ("dt-bindings: PCI: qcom,pcie-sa8775p: Move SA8775p to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-1-28c1f11599fe@linaro.org
|
|
With commit 1204777867e8 ("s390/debug: keep debug data on resize")
the behavior of a debug area resize operation was changed. Update the
associated documentation to reflect this change.
Fixes: 1204777867e8 ("s390/debug: keep debug data on resize")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add DT compatible strings for Toradex SMARC iMX95 SoM and
Toradex SMARC Development carrier board.
Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Sophgo CV18XX/SG200X SoC top misc system controller provides register
access to configure related modules. It includes a usb2 phy and a dma
multiplexer.
Co-developed-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Longbin Li <looong.bin@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251101014329.18439-2-looong.bin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
0day CI reported several broken references under
Documentation/translations/zh_CN/scsi/scsi-parameters.rst.
These files do not exist under the translations directory.
The correct references are the original English documents under
Documentation/scsi/.
This patch updates all broken paths accordingly.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511130315.WOiKJQTu-lkp@intel.com/
Signed-off-by: ke zijie <kezijie@leap-io-kernel.com>
Signed-off-by: Alex Shi <alexs@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19:
UAPI Changes:
- Add sysfs entries, coredump support and uevents to QAIC.
- Add fdinfo memory statistics to ivpu.
Cross-subsystem Changes:
- Handle stub fence initialization during module init.
- Stop using system_wq in scheduler and drivers.
Core Changes:
- Documentation updates to ttm, vblank.
- Add EDID quirk for sharp panel.
- Use drm_crtc_vblank_(crtc,waitqueue) more in core and drivers.
Driver Changes:
- Small updates and fixes to panfrost, amdxdna, vmwgfx, ast, ivpu.
- Handle preemption in amdxdna.
- Add PM support to qaic.
- Huge refactor of sun4i's layer code to decouple plane code from output
and improve support for DE33.
- Add larger page and compression support to nouveau.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/1ad3ea69-d029-4a21-8b3d-6b264b1b2a30@linux.intel.com
|
|
Patch series "mm/swapfile.c: select swap devices of default priority round
robin", v5.
Currently, on system with multiple swap devices, swap allocation will
select one swap device according to priority. The swap device with the
highest priority will be chosen to allocate firstly.
People can specify a priority from 0 to 32767 when swapon a swap device,
or the system will set it from -2 then downwards by default. Meanwhile,
on NUMA system, the swap device with node_id will be considered first on
that NUMA node of the node_id.
In the current code, an array of plist, swap_avail_heads[nid], is used to
organize swap devices on each NUMA node. For each NUMA node, there is a
plist organizing all swap devices. The 'prio' value in the plist is the
negated value of the device's priority due to plist being sorted from low
to high. The swap device owning one node_id will be promoted to the front
position on that NUMA node, then other swap devices are put in order of
their default priority.
E.g I got a system with 8 NUMA nodes, and I setup 4 zram partition as
swap devices.
Current behaviour:
their priorities will be(note that -1 is skipped):
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 0B -2
/dev/zram1 partition 16G 0B -3
/dev/zram2 partition 16G 0B -4
/dev/zram3 partition 16G 0B -5
And their positions in the 8 swap_avail_lists[nid] will be:
swap_avail_lists[0]: /* node 0's available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:1 prio:3 prio:4 prio:5
swap_avali_lists[1]: /* node 1's available swap device list */
zram1 -> zram0 -> zram2 -> zram3
prio:1 prio:2 prio:4 prio:5
swap_avail_lists[2]: /* node 2's available swap device list */
zram2 -> zram0 -> zram1 -> zram3
prio:1 prio:2 prio:3 prio:5
swap_avail_lists[3]: /* node 3's available swap device list */
zram3 -> zram0 -> zram1 -> zram2
prio:1 prio:2 prio:3 prio:4
swap_avail_lists[4-7]: /* node 4,5,6,7's available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:2 prio:3 prio:4 prio:5
The adjustment for swap device with node_id intended to decrease the
pressure of lock contention for one swap device by taking different swap
device on different node. The adjustment was introduced in commit
a2468cc9bfdf ("swap: choose swap device according to numa node").
However, the adjustment is a little coarse-grained. On the node, the swap
device sharing the node's id will always be selected firstly by node's
CPUs until exhausted, then next one. And on other nodes where no swap
device shares its node id, swap device with priority '-2' will be selected
firstly until exhausted, then next with priority '-3'.
This is the swapon output during the process high pressure vm-scability
test is being taken. It's clearly showing zram0 is heavily exploited
until exhausted.
===================================
[root@hp-dl385g10-03 ~]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 15.7G -2
/dev/zram1 partition 16G 3.4G -3
/dev/zram2 partition 16G 3.4G -4
/dev/zram3 partition 16G 2.6G -5
The node based strategy on selecting swap device is much better then the
old way one by one selecting swap device. However it is still
unreasonable because swap devices are assumed to have similar accessing
speed if no priority is specified when swapon. It's unfair and doesn't
make sense just because one swap device is swapped on firstly, its
priority will be higher than the one swapped on later.
So in this patchset, change is made to select the swap device round robin
if default priority. In code, the plist array swap_avail_heads[nid] is
replaced with a plist swap_avail_head which reverts commit a2468cc9bfdf.
Meanwhile, on top of the revert, further change is taken to make any
device w/o specified priority get the same default priority '-1'. Surely,
swap device with specified priority are always put foremost, this is not
impacted. If you care about their different accessing speed, then use
'swapon -p xx' to deploy priority for your swap devices.
New behaviour:
swap_avail_list: /* one global available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:1 prio:1 prio:1 prio:1
This is the swapon output during the process high pressure vm-scability
being taken, all is selected round robin:
=======================================
[root@hp-dl385g10-03 linux]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 12.6G -1
/dev/zram1 partition 16G 12.6G -1
/dev/zram2 partition 16G 12.6G -1
/dev/zram3 partition 16G 12.6G -1
With the change, we can see about 18% efficiency promotion as below:
vm-scability test:
==================
Test with:
usemem --init-time -O -y -x -n 31 2G (4G memcg, zram as swap)
Before: After:
System time: 637.92 s 526.74 s (lower is better)
Sum Throughput: 3546.56 MB/s 4207.56 MB/s (higher is better)
Single process Throughput: 114.40 MB/s 135.72 MB/s (higher is better)
free latency: 10138455.99 us 6810119.01 us (low is better)
This patch (of 2):
This reverts commit a2468cc9bfdf ("swap: choose swap device according to
numa node").
After this patch, the behaviour will change back to pre-commit
a2468cc9bfdf. Means the priority will be set from -1 then downwards by
default, and when swapping, it will exhault swap device one by one
according to priority from high to low. This is preparation work for
later change.
[root@hp-dl385g10-03 ~]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 16G -1
/dev/zram1 partition 16G 966.2M -2
/dev/zram2 partition 16G 0B -3
/dev/zram3 partition 16G 0B -4
Link: https://lkml.kernel.org/r/20251028034308.929550-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20251028034308.929550-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Kairui Song <kasong@tencent.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update DAMON ABI document for the newly added obsolete_target DAMON sysfs
file.
Link: https://lkml.kernel.org/r/20251023012535.69625-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Document the newly added obsolete_target DAMON sysfs file.
Link: https://lkml.kernel.org/r/20251023012535.69625-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Allow to override defaults for shemem and tmpfs at config time. This is
consistent with how transparent hugepages can be configured.
Same results can be achieved with the existing
'transparent_hugepage_shmem' and 'transparent_hugepage_tmpfs' settings in
the kernel command line, but it is more convenient to define basic
settings at config time instead of changing kernel command line later.
Defaults for shmem and tmpfs were not changed. They are remained the same
as before: 'never' for both cases. Options 'deny' and 'force' are omitted
intentionally since these are special values and supposed to be used for
emergencies or testing and are not expected to be permanent ones.
Primary motivation for adding config option is to enable policy
enforcement at build time. In large-scale production environments (Meta's
for example), the kernel configuration is often maintained centrally close
to the kernel code itself and owned by the kernel engineers, while boot
parameters are managed independently (e.g. by provisioning systems). In
such setups, the kernel build defines the supported and expected behavior
in a single place, but there is no reliable or uniform control over the
kernel command line options.
A build-time default allows kernel integrators to enforce a predictable
hugepage policy for shmem/tmpfs on a base layer, ensuring reproducible
behavior and avoiding configuration drift caused by possible boot-time
differences.
In short, primary benefit is mostly operational: it provides a way to
codify preferred policy in the kernel configuration, which is versioned,
reviewed, and tested as part of the kernel build process, rather than
depending on potentially variable boot parameters.
[d@ilvokhin.com: v2]
Link: https://lkml.kernel.org/r/aQECPpjd-fU_TC79@shell.ilvokhin.com
Link: https://lkml.kernel.org/r/aPpv8sAa2sYgNu3L@shell.ilvokhin.com
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Kiryl Shutsemau <kas@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit a983a26d5298 ("mm/damon/stat: expose negative idle time")
introduced the negative idle time feature for DAMON_STAT. But it is not
documented. Document it on the usage document.
Link: https://lkml.kernel.org/r/20251026182216.118200-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit cc7ceb1d14b0 ("mm/damon/stat: expose the current tuned aggregation
interval"), has introduced 'aggr_interval_us' parameter for DAMON_STAT.
But the new parameter is not yet documented. Document it on the usage
document for the module.
Link: https://lkml.kernel.org/r/20251026182216.118200-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 2e0fe9245d6b ("mm/damon/lru_sort: support addr_unit for
DAMON_LRU_SORT") introduced the 'addr_unit' parameter for DAMON_LRU_SORT.
But the usage document is not updated for that. Update the document.
Link: https://lkml.kernel.org/r/20251026182216.118200-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 7db551fcfb2a ("mm/damon/reclaim: support addr_unit for
DAMON_RECLAIM") introduced the 'addr_unit' parameter for DAMON_RECLAIM.
But the usage document is not updated for that. Update the document.
Link: https://lkml.kernel.org/r/20251026182216.118200-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Committing a monitoring target with empty target regions is for keeping
the current monitoring results. This behavior was introduced by commit
973233600676 ("mm/damon/sysfs: update monitoring target regions for online
input commit"). The behavior is not documented, though. Update the usage
document for clarifying this behavior.
Link: https://lkml.kernel.org/r/20251026182216.118200-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is a contextual typo. Fix it.
Link: https://lkml.kernel.org/r/20251026182216.118200-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit b243d666d107 ("Docs/admin-guide/mm/damon/usage: add intervals_goal
directory on the hierarchy") mistakenly added a wrong reference for
intervals goal usage documentation on the design document. Fix it.
Link: https://lkml.kernel.org/r/20251026182216.118200-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now we have introduced the ability to specify that actions should be taken
after a VMA is established via the vm_area_desc->action field as specified
in mmap_prepare, update both the VFS documentation and the porting guide
to describe this.
Link: https://lkml.kernel.org/r/472ce3da7662ed1065cc299d14bffb70b1a845e7.1760959442.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Chatre, Reinette <reinette.chatre@intel.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A DAMON sysfs interface file for DAMOS quota goal's optional path argument
has been added. Document it on the ABI doc.
Link: https://lkml.kernel.org/r/20251017212706.183502-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A new DAMON sysfs interface file, namely 'path' has been added under DAMOS
quota goal directory, for specifying the cgroup for
DAMOS_QUOTA_NODE_MEMCG_{USED,FREE}_BP metrics. Document it on the usage
document.
Link: https://lkml.kernel.org/r/20251017212706.183502-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update design doc for the newly added two DAMOS quota auto-tuning target
goal metrics, DAMOS_QUOTA_NODE_MEMCG_{USED,FREE}_BP.
Link: https://lkml.kernel.org/r/20251017212706.183502-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The kernel can throttle network sockets if the memory cgroup associated
with the corresponding socket is under memory pressure. The throttling
actions include clamping the transmit window, failing to expand receive or
send buffers, aggressively prune out-of-order receive queue, FIN deferred
to a retransmitted packet and more. Let's add memcg metric to track such
throttling actions.
At the moment memcg memory pressure is defined through vmpressure and in
future it may be defined using PSI or we may add more flexible way for the
users to define memory pressure, maybe through ebpf. However the
potential throttling actions will remain the same, so this newly
introduced metric will continue to track throttling actions irrespective
of how memcg memory pressure is defined.
Link: https://lkml.kernel.org/r/20251016161035.86161-1-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Daniel Sedlak <daniel.sedlak@cdn77.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
'show_stacks_handles'
Describe and provide examples for 'show_handles' and 'show_stacks_handles'.
Link: https://lkml.kernel.org/r/20251001175611.575861-6-mfo@igalia.com
Signed-off-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The change from commit 796c2c23e14e ("zswap: replace RB tree with xarray")
is not reflected on the document. Update the document.
Link: https://lkml.kernel.org/r/20251003203851.43128-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add AST2700 to the list of supported SoCs in the ASPEED FMC/SPI bindings.
AST2700 FMC/SPI controllers are not compatible with AST2600 due to the
following hardware differences:
- Address decoding unit uses 64KB granularity (AST2600 uses 1MB).
- Segment register semantics are changed.
AST2600: start <= range <= end
AST2700: start <= range < end
- Hardware limitations in AST2600 address decoding registers have been
resolved in AST2700, so extra callback function used for bug fixup
is no longer required.
These differences require distinct compatible strings for AST2700.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251114101042.1520997-2-chin-ting_kuo@aspeedtech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Steer contributors to NFSD's patchworks instance, list our patch
submission preferences, and more. The new document is based on the
existing netdev and xfs subsystem policy documents.
This is an attempt to add transparency to the process of accepting
contributions to NFSD and getting them merged upstream.
Suggested-by: "Darrick J. Wong" <djwong@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NeilBrown <neil@brown.name>
[ cel: Hand-edits to address review comments ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
Limit number of jobs per exec queue (Shuicheng)
Add sriov_admin sysfs tree (Michal)
Driver Changes:
Fix an uninitialized value (Thomas)
Expose a residency counter through debugfs (Mohammed Thasleem)
Workaround enabling and improvement (Tapani, Tangudu)
More Crescent Island-specific support (Sk Anirban, Lucas)
PAT entry dump imprement (Xin)
Inline gt_reset in the worker (Lucas)
Synchronize GT reset with device unbind (Balasubramani)
Do clean shutdown also when using flr (Jouni)
Fix serialization on burst of unbinds (Matt Brost)
Pagefault Refactor (Matt Brost)
Remove some unused code (Gwan-gyeong)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aQuBECxNOhudc0Bz@fedora
|
|
From software perspective, Rev.C HDMI and Rev.B HDMI don't differ since
the panel is connected via HDMI and the touchscreen is connected via
USB. However, the bootloader firmware expects to find a dts with the
correct revc-hdmi compatible.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
DP-to-HDMI bridge
The Parade PS185HDM is a transparent Displayport to HDMI bridge.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://patch.msgid.link/20251116-asus_usbc_dp-v2-1-cc8f51136c9f@hotmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add device-tree bindings for PHYTEC phyBOARD-Segin-i.MX91 board based on
the PHYTEC phyCORE-i.MX91 SoM (System-on-Module).
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add sysfs pressure event attributes exposed by the mpl3115 driver. These
allow controlling the threshold value and the enable state.
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Include ADXL318 and ADXL319 accelerometers to the documentation.
The ADXL318 is based on the ADXL380, while the ADXL319 is based on the
ADXL382. However, the ADXL318/319 do not support some built-in features
like single tap, double tap and triple tap detection, and also activity
and inactivity detection.
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add compatible for Airoha AN7583 SoC. The implementation is exactly the
same of Airoha EN7581 hence we add the compatible in addition to EN7581
ones.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Convert the Lantiq WDT Watchdog bindings to yaml format.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The watchdog used on the RK3506 is still the same snps,dw-wdt compatible
one that is in use since the RK3066 days, so add the RK3506 to the
variant list.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
