| Age | Commit message (Collapse) | Author |
|---|
|
Break out the part of svc_start_kthreads() that creates a thread into
svc_new_thread(), as a new exported helper function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add a new pool->sp_nrthrmin field to track the minimum number of threads
in a pool. Add min_threads parameters to both svc_set_num_threads() and
svc_set_pool_threads(). If min_threads is non-zero and less than the
max, svc_set_num_threads() will ensure that the number of running
threads is between the min and the max.
If the min is 0 or greater than the max, then it is ignored, and the
maximum number of threads will be started, and never spun down.
For now, the min_threads is always 0, but a later patch will pass the
proper value through from nfsd.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The kernel currently tracks the number of threads running in a pool in
the "sp_nrthreads" field. In the future, where threads are dynamically
spun up and down, it'll be necessary to keep track of the maximum number
of requested threads separately from the actual number running.
Add a pool->sp_nrthrmax parameter to track this. When userland changes
the number of threads in a pool, update that value accordingly.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that svc_set_num_threads() handles distributing the threads among
the available pools, remove the special handling of a NULL pool pointer
from svc_start_kthreads() and svc_stop_kthreads().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_set_num_threads() will set the number of running threads for a given
pool. If the pool argument is set to NULL however, it will distribute
the threads among all of the pools evenly.
These divergent codepaths complicate the move to dynamic threading.
Simplify the API by splitting these two cases into different helpers:
Add a new svc_set_pool_threads() function that sets the number of
threads in a single, given pool. Modify svc_set_num_threads() to
distribute the threads evenly between all of the pools and then call
svc_set_pool_threads() for each.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit 7a94d5f31b54 ("soc: qcom: smem: better track SMEM uninitialized
state") changed the usage of __smem and init now as an error pointer
instead of NULL.
qcom_smem_is_available() wasn't updated to reflect this change and also
.qcom_smem_remove doesn't reset it on module exit.
Update both entry to reflect new handling of __smem.
Fixes: 7a94d5f31b54 ("soc: qcom: smem: better track SMEM uninitialized state")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aSAnR3ECa04CoPqp@stanley.mountain/
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251122185002.26524-1-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As described at [0], much of the atomic write parts of the specification
are lacking.
For now, there is nothing which we can do in software about the lack of
a dedicated NVMe write atomic command.
As for reading the atomic write limits, it is felt that the per-namespace
values are mostly properly specified and it is assumed that they are
properly implemented.
The specification of NAWUPF is quite clear. However the specification of
NABSPF is less clear. The lack of clarity in NABSPF comes from deciding
whether NABSPF applies when NSABP is 0 - it is assumed that NSABPF does
not apply when NSABP is 0.
As for the per-controller AWUPF, how this value applies to shared
namespaces is missing in the specification. Furthermore, the value is in
terms of logical blocks, which is an NS entity.
Since AWUPF is so poorly defined, stop using it already together.
Hopefully this will force vendors to implement NAWUPF support always.
Note that AWUPF not only effects atomic write support, but also the
physical block size reported for the device.
To help users know this restriction, log an info message per NS.
[0] https://lore.kernel.org/linux-nvme/20250707141834.GA30198@lst.de/
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The call to nvme_free_sgls() in nvme_unmap_data() has the sg_list and sge
parameters swapped. This wasn't noticed by the compiler because both share
the same type. On a Xen PV hardware domain, and possibly any other
architectures that takes that path, this leads to corruption of the NVMe
contents.
Fixes: f0887e2a52d4 ("nvme-pci: create common sgl unmapping helper")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
"pg_init_delay_msecs X" can be passed as a feature in the multipath
table and is used to set m->pg_init_delay_msecs in parse_features().
However, alloc_multipath_stage2(), which is called after
parse_features(), resets m->pg_init_delay_msecs to its default value.
Instead, set m->pg_init_delay_msecs in alloc_multipath(), which is
called before parse_features(), to avoid overwriting a value passed in
by the table.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Cc: stable@vger.kernel.org
|
|
This reverts commit f6007dce0cd35d634d9be91ef3515a6385dcee16.
Commit f6007dce0cd3 ("dm: fix a race condition in retrieve_deps") was
added to fix a race between retrieving the list of dm table devices and
multipath_message() modifying the list of table devices. But Commit
a48f6b82c5c4 ("dm mpath: don't call dm_get_device in multipath_message")
removed the call to dm_get_device() from multipath_message(). After that
commit, the only calls to dm_get_device() and dm_put_device() are in
target constructors and destructors, so the race with retrieve_deps() is
no longer possible.
Suggested-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
When commit fd81bc5cca8f ("scsi: device_handler: Return error pointer in
scsi_dh_attached_handler_name()") added code to fail parsing the path if
scsi_dh_attached_handler_name() failed with -ENOMEM, it didn't clean up
the reference to the path device that had just been taken. Fix this, and
steamline the error paths of parse_path() a little.
Fixes: fd81bc5cca8f ("scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
GPIO Address Space handler gets a pointer to the in or out value.
This value is supposed to be at least 64-bit, but it's not limited
to be exactly 64-bit. When ACPI tables are being parsed, for
the bigger Connection():s ACPICA creates a Buffer instead of regular
Integer object. The Buffer exists as long as Namespace holds
the certain Connection(). Hence we can access the necessary bits
without worrying. On the other hand, the left shift, used in
the code, is limited by 31 (on 32-bit platforms) and otherwise
considered to be Undefined Behaviour. Also the code uses only
the first 64-bit word for the value, and anything bigger than 63
will be also subject to UB. Fix all this by modifying the code
to correctly set or clear the respective bit in the bitmap constructed
of 64-bit words.
Fixes: 59084c564c41 ("gpiolib: acpi: use BIT_ULL() for u64 mask in address space handler")
Fixes: 2c4d00cb8fc5 ("gpiolib: acpi: Use BIT() macro to increase readability")
Cc: stable@vger.kernel.org
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260128095918.4157491-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The cache flush was happening on every level across the whole range of
iteration, even if no leafs or tables were cleared. Instead flush only the
sub range that was actually written.
Overflushing isn't a correctness problem but it does impact the
performance of unmap.
After this series the performance compared to the original VT-d
implementation with cache flushing turned on is:
map_pages
pgsz ,avg new,old ns, min new,old ns , min % (+ve is better)
2^12, 253,266 , 213,227 , 6.06
2^21, 246,244 , 221,219 , 0.00
2^30, 231,240 , 209,217 , 3.03
256*2^12, 2604,2668 , 2415,2540 , 4.04
256*2^21, 2495,2824 , 2390,2734 , 12.12
256*2^30, 2542,2845 , 2380,2718 , 12.12
unmap_pages
pgsz ,avg new,old ns, min new,old ns , min % (+ve is better)
2^12, 259,292 , 222,251 , 11.11
2^21, 255,259 , 227,236 , 3.03
2^30, 238,254 , 217,230 , 5.05
256*2^12, 2751,2620 , 2417,2437 , 0.00
256*2^21, 2461,2526 , 2377,2423 , 1.01
256*2^30, 2498,2543 , 2370,2404 , 1.01
Fixes: efa03dab7ce4 ("iommupt: Flush the CPU cache after any writes to the page table")
Reported-by: Francois Dugast <francois.dugast@intel.com>
Closes: https://lore.kernel.org/all/20260121130233.257428-1-francois.dugast@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
When building with -Wincompatible-function-pointer-types-strict, a
warning designed to catch kernel control flow integrity (kCFI) issues at
build time, there is an instance around amd_iommufd_hw_info():
drivers/iommu/amd/iommu.c:3141:13: error: incompatible function pointer types initializing 'void *(*)(struct device *, u32 *, enum iommu_hw_info_type *)' (aka 'void *(*)(struct device *, unsigned int *, enum iommu_hw_info_type *)') with an expression of type 'void *(struct device *, u32 *, u32 *)' (aka 'void *(struct device *, unsigned int *, unsigned int *)') [-Werror,-Wincompatible-function-pointer-types-strict]
3141 | .hw_info = amd_iommufd_hw_info,
| ^~~~~~~~~~~~~~~~~~~
While 'u32 *' and 'enum iommu_hw_info_type *' are ABI compatible, hence
no regular warning from -Wincompatible-function-pointer-types, the
mismatch will trigger a kCFI violation when amd_iommufd_hw_info() is
called indirectly.
Update the type parameter of amd_iommufd_hw_info() to be
'enum iommu_hw_info_type *' to match the prototype in
'struct iommu_ops', clearing up the warning and kCFI violation.
Fixes: 7d8b06ecc45b ("iommu/amd: Add support for hw_info for iommu capability query")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The DesignWare EP core has supported updating the inbound iATU mapping
for an already configured BAR (i.e. allowing pci_epc_set_bar() to be
called again without a prior pci_epc_clear_bar()) since
commit 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update
inbound map address").
Now that this capability is exposed via the dynamic_inbound_mapping EPC
feature bit, set it for DWC-based EP glue drivers using a common
initializer macro to avoid duplicating the same flag in each driver.
Note that pci-layerscape-ep.c is untouched. It currently constructs the
feature struct dynamically in ls_pcie_ep_init(). Once converted to a
static feature definition, it will use DWC_EPC_COMMON_FEATURES as well.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260124145012.2794108-4-den@valinux.co.jp
|
|
Some endpoint platforms have only a small number of usable BARs. At the
same time, EPF drivers (e.g. vNTB) may need multiple independent inbound
regions (control/scratchpad, one or more memory windows, and optionally
MSI or other feature-related regions). Subrange mapping allows these to
share a single BAR without consuming additional BARs that may not be
available, or forcing a fragile layout by aggressively packing into a
single contiguous memory range.
Extend the PCI endpoint core to support mapping subranges within a BAR.
Add an optional 'submap' field in struct pci_epf_bar so an endpoint
function driver can request inbound mappings that fully cover the BAR.
Introduce a new EPC feature bit, subrange_mapping, and reject submap
requests from pci_epc_set_bar() unless the controller advertises both
subrange_mapping and dynamic_inbound_mapping features.
The submap array describes the complete BAR layout (no overlaps and no
gaps are allowed to avoid exposing untranslated address ranges). This
provides the generic infrastructure needed to map multiple logical
regions into a single BAR at different offsets, without assuming a
controller-specific inbound address translation mechanism.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260124145012.2794108-3-den@valinux.co.jp
|
|
Introduce a new EPC feature bit (dynamic_inbound_mapping) that indicates
whether an Endpoint Controller can update the inbound address
translation for a BAR without requiring the EPF driver to clear/reset
the BAR first.
Endpoint Function drivers (e.g. vNTB) can use this information to decide
whether it really is safe to call pci_epc_set_bar() multiple times to
update inbound mappings for the BAR.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260124145012.2794108-2-den@valinux.co.jp
|
|
There is no clear sign why we have tng_pinctrl_probe() in the first
place when it has already been using managed calls. Join the function
into its devm_tng_pinctrl_probe() wrapper.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When fp-pidbench was originally written SVE hardware was not widely
available so it was useful to run it in emulation and the default number
of loops was set very low, running for less than a second on actual
hardware. Now that SVE hardware is reasonably available it is very much
less interesting to use emulation, bump the default number of loops up to
even out a bit of the noise on real systems. On the machine I have to hand
this now takes about 15s which is still a toy microbenchmark but perhaps a
bit more useful.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Some applications use SVE intermittently, one common case being where SVE
is used during statup (eg, by ld.so) but then rarely if ever during the
main application runtime. Add a repeat of the no SVE loop after we've done
the SVE loops to fp-pidbench to capture results for that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also disallows force-threading of the primary handler and the
irq-core will warn about this.
The intention here was probably not allowing forced-threading.
Replace IRQF_ONESHOT with IRQF_NO_THREAD.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The current implementation for Victus S thermal profiles only supports
setting the profile. The driver was missing the logic to read the
hardware state, meaning it would default to "Balanced" on driver load,
overriding the currently active profile. Furthermore, the driver could
not detect if the firmware reset the profile on a power source change.
Statically store the known EC offsets for reading thermal profile in the
new .ec_tp_offset field of struct thermal_profile_params. Implement
platform_profile_victus_s_get_ec() to use this offset to read the real
hardware state. Additionally, update the power source event notifier to
use the actual hardware state when re-triggering CPU power limits
actualization.
Testing on HP Omen 16-wf1xxx (board ID 8C78) confirmed that the thermal
profile is now persistent across driver loads and power source change
events.
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260121182858.66363-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In a few places in the Classmate laptop driver, code using the accel
object may run before that object's address is stored in the driver
data of the input device using it.
For example, cmpc_accel_sensitivity_store_v4() is the "show" method
of cmpc_accel_sensitivity_attr_v4 which is added in cmpc_accel_add_v4(),
before calling dev_set_drvdata() for inputdev->dev. If the sysfs
attribute is accessed prematurely, the dev_get_drvdata(&inputdev->dev)
call in in cmpc_accel_sensitivity_store_v4() returns NULL which
leads to a NULL pointer dereference going forward.
Moreover, sysfs attributes using the input device are added before
initializing that device by cmpc_add_acpi_notify_device() and if one
of them is accessed before running that function, a NULL pointer
dereference will occur.
For example, cmpc_accel_sensitivity_attr_v4 is added before calling
cmpc_add_acpi_notify_device() and if it is read prematurely, the
dev_get_drvdata(&acpi->dev) call in cmpc_accel_sensitivity_show_v4()
returns NULL which leads to a NULL pointer dereference going forward.
Fix this by adding NULL pointer checks in all of the relevant places.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12825381.O9o76ZdvQC@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Gary writes:
"This series converts Rust proc macros that we have to use `syn`,
and replace the custom `quote!` macro that we have with the vendored
`quote!` macro. The `pin-init` macros are not converted yet; Benno
has a work in progress in converting them. They're however converted
to use `quote` and `proc-macro2` crate so our custom `quote!` macro
can be removed.
Overall this improves the robustness of the macros as we have precise
parsing of the AST rather than relying on heuristics to extract needed
information from there. This is also a quality-of-life improvement
to those using language servers (e.g. Rust analyzer) as the span
information of the proc macros are now preserved which allows the
"jump-to-definition" feature to work, even when used on completely
custom macros such as `module!`.
Miguel gave a very good explanation on why `syn` is a good idea in the
patch series that introduced it [1], which I shall not repeat here."
The `pin-init` rewrite was merged just before this one.
Link: https://lore.kernel.org/rust-for-linux/20251124151837.2184382-1-ojeda@kernel.org/ [1]
Link: https://patch.msgid.link/20260112170919.1888584-1-gary@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Currently, we generate `HAS_` constants as long as the definition exists in
the source, regardless if it is cfg-ed out or not.
Currently, uses of `#[cfg]` present in both trait and impl, so it is not a
problem; however if only the impl side uses `#[cfg]` then `HAS_` constants
will incorrectly be true while it shouldnt't.
With `syn` support, we can now implement `#[cfg]` handling properly by
propagating the `#[cfg]` attributes to the constants.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://patch.msgid.link/20260113170529.2240744-1-gary@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The last null element can be created (constly) using `pin_init::zeroed`,
so prefer to use it instead of adding a custom way of building it.
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://patch.msgid.link/20260112170919.1888584-12-gary@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This `#[doc(hidden)]` can just be applied on a module to hide anything
within.
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260112170919.1888584-11-gary@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Previously this only accepts an identifier, but now with `syn` it is
easy to make it accepts any type.
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260112170919.1888584-10-gary@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Make use of `syn` to parse the module structurally and thus improve the
robustness of parsing.
String interpolation is avoided by generating tokens directly using
`quote!`.
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://patch.msgid.link/20260112170919.1888584-9-gary@kernel.org
[ Pass C string to match commit 6c37b6841a92 ("rust: kunit: replace
`kernel::c_str!` with C-Strings"). - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
800GB/s ethernet switch.
This system is based on Nvidia SN5600 Spectrum-4 Based 64x800Gb/s ETH
Switch System, with the following key changes:
Key changes:
1. New system SKU: HI174.
2. Power Supply: PSU AC replaiced with PDB board (added pdb/pwr
attributes).
3. CPLD: Update register map with new PDB related signals.
Signed-off-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://patch.msgid.link/20260128075939.2704019-3-oleksandrs@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
based on class VMOD0010
This system is based on Nvidia QM9700 64x400G QTM-2 switch, with the
following key changes:
Key changes:
1. New system SKU: HI73.
2. Power Supply: PSU AC replaiced with PDB board (added pdb/pwr
attributes).
3. CPLD: Update register map with new PDB related signals.
Signed-off-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://patch.msgid.link/20260128075939.2704019-2-oleksandrs@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In fsl_mc_device_add(), device_initialize() is called first.
put_device() should be called to drop the reference if error
occurs. And other resources would be released via put_device
-> fsl_mc_device_release. So remove redundant kfree() in
error handling path.
Fixes: bbf9d17d9875 ("staging: fsl-mc: Freescale Management Complex (fsl-mc) bus driver")
Cc: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/b767348e-d89c-416e-acea-1ebbff3bea20@stanley.mountain/
Signed-off-by: Su Hui <suhui@nfschina.com>
Suggested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20260124102054.1613093-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Replace snprintf("%s", ...) with the faster and more direct strscpy().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix direct I/O on devices that require stable pages by asking iomap
to bounce buffer. To support this, ioends are used for direct reads
in this case to provide a user context for copying data back from the
bounce buffer.
This fixes qemu when used on devices using T10 protection information
and probably other cases like iSCSI using data digests.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new flag that request bounce buffering for direct I/O. This is
needed to provide the stable pages requirement requested by devices
that need to calculate checksums or parity over the data and allows
file systems to properly work with things like T10 protection
information. The implementation just calls out to the new bio bounce
buffering helpers to allocate a bounce buffer, which is used for
I/O and to copy to/from it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Support using the ioend structure to defer I/O completion for direct
reads in addition to writes. This requires a check for the operation
to not merge reads and writes in iomap_ioend_can_merge. This support
will be used for bounce buffered direct I/O reads that need to copy
data back to the user address space on read completion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the more descriptive iov_iter terminology instead of encoding
what we do with them for reads only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are good arguments for processing the user completions ASAP vs.
freeing resources ASAP, but freeing the bio first here removes potential
use after free hazards when checking flags, and will simplify the
upcoming bounce buffer support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Refactor the two per-bio completion handlers to share common code using
a new helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out a separate helper that builds and submits a single bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use iov_iter_count to check if we need to continue as that just reads
a field in the iov_iter, and only use bio_iov_vecs_to_alloc to calculate
the actual number of vectors to allocate for the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The "if (dio->error)" in iomap_dio_bio_iter exists to stop submitting
more bios when a completion already return an error. Commit cfe057f7db1f
("iomap_dio_actor(): fix iov_iter bugs") made it revert the iov by
"copied", which is very wrong given that we've already consumed that
range and submitted a bio for it.
Fixes: cfe057f7db1f ("iomap_dio_actor(): fix iov_iter bugs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add helpers to implement bounce buffering of data into a bio to implement
direct I/O for cases where direct user access is not possible because
stable in-flight data is required. These are intended to be used as
easily as bio_iov_iter_get_pages for the zero-copy path.
The write side is trivial and just copies data into the bounce buffer.
The read side is a lot more complex because it needs to perform the copy
from the completion context, and without preserving the iov_iter through
the call chain. It steals a trick from the integrity data user interface
and uses the first vector in the bio for the bounce buffer data that is
fed to the block I/O stack, and uses the others to record the user
buffer fragments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge bio_release_page into the only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Massage __bio_iov_iter_get_pages so that it doesn't need the bio, and
move it to lib/iov_iter.c so that it can be used by block code for
other things than filling a bio and by other subsystems like netfs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
