| Age | Commit message (Collapse) | Author |
|---|
|
The E825 hardware currently has each PF handle the PFINT_TSYN_TX cause of
the miscellaneous OICR interrupt vector. The actual interrupt cause
underlying this is shared by all ports on the same quad:
┌─────────────────────────────────┐
│ │
│ ┌────┐ ┌────┐ ┌────┐ ┌────┐ │
│ │PF 0│ │PF 1│ │PF 2│ │PF 3│ │
│ └────┘ └────┘ └────┘ └────┘ │
│ │
└────────────────▲────────────────┘
│
│
┌────────────────┼────────────────┐
│ PHY QUAD │
└───▲────────▲────────▲────────▲──┘
│ │ │ │
┌───┼──┐ ┌───┴──┐ ┌───┼──┐ ┌───┼──┐
│Port 0│ │Port 1│ │Port 2│ │Port 3│
└──────┘ └──────┘ └──────┘ └──────┘
If multiple PFs issue Tx timestamp requests near simultaneously, it is
possible that the correct PF will not be interrupted and will miss its
timestamp. Understanding why is somewhat complex.
Consider the following sequence of events:
CPU 0:
Send Tx packet on PF 0
...
PF 0 enqueues packet with Tx request CPU 1, PF1:
... Send Tx packet on PF1
... PF 1 enqueues packet with Tx request
HW:
PHY Port 0 sends packet
PHY raises Tx timestamp event interrupt
MAC raises each PF interrupt
CPU 0, PF0: CPU 1, PF1:
ice_misc_intr() checks for Tx timestamps ice_misc_intr() checks for Tx timestamp
Sees packet ready bit set Sees nothing available
... Exits
...
...
HW:
PHY port 1 sends packet
PHY interrupt ignored because not all packet timestamps read yet.
...
Read timestamp, report to stack
Because the interrupt event is shared for all ports on the same quad, the
PHY will not raise a new interrupt for any PF until all timestamps are
read.
In the example above, the second timestamp comes in for port 1 before the
timestamp from port 0 is read. At this point, there is no longer an
interrupt thread running that will read the timestamps, because each PF has
checked and found that there was no work to do. Applications such as ptp4l
will timeout after waiting a few milliseconds. Eventually, the watchdog
service task will re-check for all quads and notice that there are
outstanding timestamps, and issue a software interrupt to recover. However,
by this point it is far too late, and applications have already failed.
All of this occurs because of the underlying hardware behavior. The PHY
cannot raise a new interrupt signal until all outstanding timestamps have
been read.
As a first step to fix this, switch the E825C hardware to the
ICE_PTP_TX_INTERRUPT_ALL mode. In this mode, only the clock owner PF will
respond to the PFINT_TSYN_TX cause. Other PFs disable this cause and will
not wake. In this mode, the clock owner will iterate over all ports and
handle timestamps for each connected port.
This matches the E822 behavior, and is a necessary but insufficient step to
resolve the missing timestamps.
Even with use of the ICE_PTP_TX_INTERRUPT_ALL mode, we still sometimes miss
a timestamp event. The ice_ptp_tx_tstamp_owner() does re-check the ready
bitmap, but does so before re-enabling the OICR interrupt vector. It also
only checks the ready bitmap, but not the software Tx timestamp tracker.
To avoid risk of losing a timestamp, refactor the logic to check both the
software Tx timestamp tracker bitmap *and* the hardware ready bitmap.
Additionally, do this outside of ice_ptp_process_ts() after we have already
re-enabled the OICR interrupt.
Remove the checks from the ice_ptp_tx_tstamp(), ice_ptp_tx_tstamp_owner(),
and the ice_ptp_process_ts() functions. This results in ice_ptp_tx_tstamp()
being nothing more than a wrapper around ice_ptp_process_tx_tstamp() so we
can remove it.
Add the ice_ptp_tx_tstamps_pending() function which returns a boolean
indicating if there are any pending Tx timestamps. First, check the
software timestamp tracker bitmap. In ICE_PTP_TX_INTERRUPT_ALL mode, check
*all* ports software trackers. If a tracker has outstanding timestamp
requests, return true. Additionally, check the PHY ready bitmap to confirm
if the PHY indicates any outstanding timestamps.
In the ice_misc_thread_fn(), call ice_ptp_tx_tstamps_pending() just before
returning from the IRQ thread handler. If it returns true, write to
PFINT_OICR to trigger a PFINT_OICR_TSYN_TX_M software interrupt. This will
force the handler to interrupt again and complete the work even if the PHY
hardware did not interrupt for any reason.
This results in the following new flow for handling Tx timestamps:
1) send Tx packet
2) PHY captures timestamp
3) PHY triggers MAC interrupt
4) clock owner executes ice_misc_intr() with PFINT_OICR_TSYN_TX flag set
5) ice_ptp_ts_irq() returns IRQ_WAKE_THREAD
7) The interrupt thread wakes up and kernel calls ice_misc_intr_thread_fn()
8) ice_ptp_process_ts() is called to handle any outstanding timestamps
9) ice_irq_dynamic_ena() is called to re-enable the OICR hardware interrupt
cause
10) ice_ptp_tx_tstamps_pending() is called to check if we missed any more
outstanding timestamps, checking both software and hardware indicators.
With this change, it should no longer be possible for new timestamps to
come in such a way that we lose an interrupt. If a timestamp comes in
before the ice_ptp_tx_tstamps_pending() call, it will be noticed by at
least one of the software bitmap check or the hardware bitmap check. If the
timestamp comes in *after* this check, it should cause a timestamp
interrupt as we have already read all timestamps from the PHY and the OICR
vector has been re-enabled.
Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Vitaly Grinberg <vgrinber@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Modify PTP (Precision Time Protocol) configuration on link down flow.
Previously, PHY_REG_TX_OFFSET_READY register was cleared in such case.
This register is used to determine if the timestamp is valid or not on
the hardware side.
However, there is a possibility that there is still the packet in the
HW queue which originally was supposed to be timestamped but the link
is already down and given register is cleared.
This potentially might lead to the situation in which that 'delayed'
packet's timestamp is treated as invalid one when the link is up
again.
This in turn leads to the situation in which the driver is not able to
effectively clean timestamp memory and interrupt configuration.
From the hardware perspective, that 'old' interrupt was not handled
properly and even if new timestamp packets are processed, no new
interrupts is generated. As a result, providing timestamps to the user
applications (like ptp4l) is not possible.
The solution for this problem is implemented at the driver level rather
than the firmware, and maintains the tx_ready bit high, even during
link down events. This avoids entering a potential inconsistent state
between the driver and the timestamp hardware.
Testing hints:
- run PTP traffic at higher rate (like 16 PTP messages per second)
- observe ptp4l behaviour at the client side in the following
conditions:
a) trigger link toggle events. It needs to be physiscal
link down/up events
b) link speed change
In all above cases, PTP processing at ptp4l application should resume
always. In failure case, the following permanent error message in ptp4l
log was observed:
controller-0 ptp4l: err [6175.116] ptp4l-legacy timed out while polling
for tx timestamp
Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In a previous commit, a bug was introduced where compact SSA summaries
failed to utilize the entire block space in non-4KB block size
configurations, leading to inefficient space management.
This patch fixes the calculation logic to ensure that compact SSA
summaries can fully occupy the block regardless of the block size.
Reported-by: Chris Mason <clm@meta.com>
Fixes: e48e16f3e37f ("f2fs: support non-4KB block size without packed_ssa feature")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Compiling the NFSv4 module without any minorversion support doesn't make
much sense, so this patch sets NFS v4.1 as the default, always enabled
NFS version allowing us to replace all the CONFIG_NFS_V4_1s scattered
throughout the code with CONFIG_NFS_V4.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
I introduce NFS4_MIN_MINOR_VERSION as a parallel to
NFS4_MAX_MINOR_VERSION to check if NFS v4.0 has been compiled in and
return an appropriate error if not.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
At the same time, I move the NFS v4.0 functions into nfs40proc.c to keep
v4.0 features together in their own files.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
No functional change in this patch. This just makes the next patch where
I introduce "sequence slot operations" simpler.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
They don't need to be visible outside of nfs40proc.c anymore now that
the minor version ops have been moved over.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This is the first step in extracting NFS v4.0 into its own set of files
that can be disabled through Kconfig.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
cxl: Fix premature commit_end increment on decoder commit failure
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.20
This pull request contains the interconnect changes for the 6.20-rc1
merge window. The core and driver changes are listed below.
Core changes:
- Add KUnit tests for core functionality
Driver changes:
- New driver for MediaTek MT8196 EMI
- MediaTek driver fixes
- Support for Glymur BWMONs
- QCS8300 driver topology fix
- Misc cleanups
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.20-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: msm8974: drop duplicated RPM_BUS_{MASTER,SLAVE}_REQ defines
interconnect: qcom: smd-rpm: drop duplicated QCOM_RPM_SMD_KEY_RATE define
dt-bindings: interconnect: qcom-bwmon: Document Glymur BWMONs
interconnect: qcom: qcs8300: fix the num_links for nsp icc node
interconnect: Add kunit tests for core functionality
dt-bindings: interconnect: qcom,qcs615-rpmh: Drop IPA interconnects
interconnect: mediatek: Aggregate bandwidth with saturating add
interconnect: mediatek: Don't hijack parent device
interconnect: mediatek: Add support for MediaTek MT8196 EMI ICC
dt-bindings: interconnect: mt8183-emi: Add support for MT8196 EMI
|
|
There are no entries left to ignore and none should be added again.
Remove the now unused logic.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
UAPI headers are not supposed to leak references to kconfig symbols.
These won't be set when building userspace. Hide the kconfig reference
behind 'if defined(__KERNEL__)', so it will be stripped by
headers_install.sh. The result for userspace will be the same, but the
exceptions in headers_install.sh can also be removed.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
UAPI headers are not supposed to leak references to kconfig symbols.
They are undefined there in any case. As all actual definitions of this
header are guarded behind a kconfig symbol, for userspace the header is
always identical to its asm-generic variant.
Make the custom UAPI header a kernel-internal one, so the leaks of
kconfig symbols are fixed and userspace will instead use
asm-generic/swab.h directly.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/93c55086-931a-4282-a94c-de4954047fa9@app.fastmail.com/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The symbol PSR_ENDSTATE is pointless for userspace. Drop it from the
UAPI headers and instead inline it into the only two callers.
As as side-effect, remove a leak of an internal kconfig symbol through
the UAPI headers.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/d2ad12f2-3d65-4bef-890c-65d78a33d790@app.fastmail.com/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since commit 67a697e7576 ("ARC: retire ARC750 support") all supported
CPUs have the 'swape' instruction.
Always use the implementation of __arch_swabe() which uses 'swape'.
ARCH_USE_BUILTIN_BSWAP can not be used as that results on libcalls on
-mcpu=arc700.
As as side-effect, remove a leak of an internal kconfig symbol through
the UAPI headers.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/0ae2688a-5a22-405b-adaf-9b5ad712b245@app.fastmail.com/
Suggested-by: Vineet Gupta <vgupta@kernel.org>
Link: https://lore.kernel.org/lkml/a033a402-e3c5-4982-9fff-b6a4c55817ae@kernel.org/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Agilex devkit supports a separate eMMC daughter card. The
eMMC daughter card replaces the SDMMC slot that is on the default
daughter card and thus requires a separate board dts file.
Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add a appropriate kerneldoc to trace_event_buffer_reserve() to make it
easier to understand how that function is used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260130103745.1126e4af@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The definition of cpumask_of_node() in question is guarded by conflicting
CONFIG_NUMA and !CONFIG_NUMA checks, so remove it.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The current use of guard(preempt_notrace)() within __DECLARE_TRACE()
to protect invocation of __DO_TRACE_CALL() means that BPF programs
attached to tracepoints are non-preemptible. This is unhelpful in
real-time systems, whose users apparently wish to use BPF while also
achieving low latencies. (Who knew?)
One option would be to use preemptible RCU, but this introduces
many opportunities for infinite recursion, which many consider to
be counterproductive, especially given the relatively small stacks
provided by the Linux kernel. These opportunities could be shut down
by sufficiently energetic duplication of code, but this sort of thing
is considered impolite in some circles.
Therefore, use the shiny new SRCU-fast API, which provides somewhat faster
readers than those of preemptible RCU, at least on Paul E. McKenney's
laptop, where task_struct access is more expensive than access to per-CPU
variables. And SRCU-fast provides way faster readers than does SRCU,
courtesy of being able to avoid the read-side use of smp_mb(). Also,
it is quite straightforward to create srcu_read_{,un}lock_fast_notrace()
functions.
Link: https://lore.kernel.org/all/20250613152218.1924093-1-bigeasy@linutronix.de/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20260126231256.499701982@kernel.org
Co-developed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
SRCU-fast is designed to be used in NMI handlers, even going so far
as to use atomic operations for architectures supporting NMIs but not
providing NMI-safe per-CPU atomic operations. However, the WARN_ON_ONCE()
in __srcu_check_read_flavor() complains if SRCU-fast is used in an NMI
handler. This commit therefore modifies that WARN_ON_ONCE() to avoid
such complaints.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Boqun Feng <boqun@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://patch.msgid.link/8232efe8-a7a3-446c-af0b-19f9b523b4f7@paulmck-laptop
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In order to switch the protection of tracepoint callbacks from
preempt_disable() to srcu_read_lock_fast() the BPF callback from
tracepoints needs to have migration prevention as the BPF programs expect
to stay on the same CPU as they execute. Put together the RCU protection
with migration prevention and use rcu_read_lock_dont_migrate() in
__bpf_trace_run(). This will allow tracepoints callbacks to be
preemptible.
Link: https://lore.kernel.org/all/CAADnVQKvY026HSFGOsavJppm3-Ajm-VsLzY-OeFUe+BaKMRnDg@mail.gmail.com/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20260126231256.335034877@kernel.org
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In preparation to convert protection of tracepoints from being protected
by a preempt disabled section to being protected by SRCU, have all the
perf callbacks disable preemption as perf expects preemption to be
disabled when processing tracepoints.
While at it, convert the perf system call callback preempt_disable() to a
guard(preempt).
Link: https://lore.kernel.org/all/20250613152218.1924093-1-bigeasy@linutronix.de/
Link: https://patch.msgid.link/20260108220550.2f6638f3@fedora
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20260126231256.174621257@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Move dma-controller node under simple-bus node to allow bus node specific
property able to be properly defined. This is require to fulfill Agilex5
bus limitation that is limited to 40-addressable-bit.
Update the compatible string for the DMA controller nodes in the Agilex5
device tree from the generic "snps,axi-dma-1.01a" to the platform-specific
"altr,agilex5-axi-dma". Add fallback capability to ensure driver is able
to initialize properly.
This change enables the use of platform-specific features and constraints
in the driver, such as setting a 40-bit DMA addressable mask through
dma-ranges, which is required for Agilex5. It also aligns with the updated
device tree bindings and driver support for this compatible string.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
soc (simple-bus): base_fpga_region: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/simple-bus.yaml
base_fpga_region (fpga-region): $nodename:0: 'base_fpga_region' does not match
'^fpga-region(@.*|-([0-9]|[1-9][0-9]+))?$'
from schema $id: http://devicetree.org/schemas/fpga/fpga-region.yaml
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add #address-cells and #size-cells for sram node to fix below DTB_CHECK
warnings:
socfpga_arria5_socdk.dtb: sram@ffff0000 (mmio-sram): '#size-cells' is a
required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
For 32-bit Altera SoCFPGA parts, the sys-mgr uses the syscon as a fallback.
This change addresses this warning from dtbs_check:
sysmgr@ffd08000 (altr,sys-mgr): compatible: 'oneOf' conditional failed, one
must be fixed:
['altr,sys-mgr', 'syscon'] is too long
'altr,sys-mgr-s10' was expected
'altr,sys-mgr' was expected
from schema $id: http://devicetree.org/schemas/soc/altera/altr,sys-mgr.yaml
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The DTS code coding style expects lowercase hex for values and unit
addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
For all SoCFPGA platforms, whether it has the "intel" or "altr" vendor
prefix are referring to the same business unit that is responsible for
the platform. And now that Altera has spun off to be a separate corporate
entity from Intel, it would make sense to have the device bindings
documentation in the same file.
Move the Intel AgileX board binding documentations into the same file that
contains the Altera ones.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
To enable SMMU integration, populate the iommus property to the ethernet
device-tree node.
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The Agilex5 Modular board consists of a compute module (Agilex5 SoCFPGA)
attached to a carrier board that provides PCIe and additional system
interfaces.
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add compatible for Agilex5 SoCFPGA modular board.
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add the `dma-coherent` property to these device nodes to inform the
kernel and DMA subsystem that the devices support hardware-managed
cache coherence.
Changes:
- Add `dma-coherent` to `cdns,hp-nfc`
- Add `dma-coherent` to both `snps,axi-dma-1.01a` instances
(dmac0, dmac1)
This aligns the Agilex5 device tree with the coherent DMA-capable
devices accordingly.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
When an arvif is initialized in non-AP STA mode but MLO connection
preparation fails before the arvif is created
(arvif->is_created remains false), the error path attempts to delete all
links. However, link deletion only executes when arvif->is_created is true.
As a result, ahvif retains a stale entry of arvif that is initialized but
not created.
When a new arvif is initialized with the same link id, this stale mapping
triggers the following WARN_ON.
WARNING: drivers/net/wireless/ath/ath12k/mac.c:4271 at ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k], CPU#3: wpa_supplicant/275
Call trace:
ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k] (P)
drv_change_vif_links+0xbc/0x1a4 [mac80211]
ieee80211_vif_update_links+0x54c/0x6a0 [mac80211]
ieee80211_vif_set_links+0x40/0x70 [mac80211]
ieee80211_prep_connection+0x84/0x450 [mac80211]
ieee80211_mgd_auth+0x200/0x480 [mac80211]
ieee80211_auth+0x14/0x20 [mac80211]
cfg80211_mlme_auth+0x90/0xf0 [cfg80211]
nl80211_authenticate+0x32c/0x380 [cfg80211]
genl_family_rcv_msg_doit+0xc8/0x134
Fix this issue by unassigning the link vif and clearing ahvif->links_map
if arvif is only initialized but not created.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: 81e4be30544e ("wifi: ath12k: handle link removal in change_vif_links()")
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260127033400.1721220-1-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add support to request and receive TX hardware queue stats using
HTT stats type 3. This stats type reports MPDU mac id and hardware
queue information, including xretry, BAR, RTS, CTS, self, and QoS-null
counts, along with underrun, flush, and filter counters.
Sample output:
-------------
echo 3 >/sys/kernel/debug/ath12k/pci-0000\:58\:00.0/mac0/htt_stats_type
cat /sys/kernel/debug/ath12k/pci-0000\:58\:00.0/mac0/htt_stats
HTT_TX_HWQ_STATS_CMN_TLV:
mac_id = 0
hwq_id = 0
xretry = 0
underrun_cnt = 0
flush_cnt = 0
filt_cnt = 0
null_mpdu_bmap = 0
user_ack_failure = 379
ack_tlv_proc = 0
sched_id_proc = 0
null_mpdu_tx_count = 0
mpdu_bmap_not_recvd = 0
num_bar = 0
rts = 0
cts2self = 0
qos_null = 0
mpdu_tried_cnt = 379
mpdu_queued_cnt = 379
mpdu_ack_fail_cnt = 0
mpdu_filt_cnt = 0
false_mpdu_ack_count = 0
txq_timeout = 0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123071253.2202644-4-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add support to request and receive RX pdev firmware stats using HTT
stats type 2. This stats type reports PPDU and MPDU counters, firmware
ring and buffer statistics, and RX suspend and resume counts.
Note: Currently, firmware on mobile-centric chipsets do not maintain
these statistics, so a query will not return any information.
Sample output:
-------------
echo 2 >/sys/kernel/debug/ath12k/pci-0000\:58\:00.0/mac0/htt_stats_type
cat /sys/kernel/debug/ath12k/pci-0000\:58\:00.0/mac0/htt_stats
HTT_RX_PDEV_FW_STATS_TLV:
mac_id = 0
ppdu_recvd = 1522
mpdu_cnt_fcs_ok = 1522
mpdu_cnt_fcs_err = 0
...
fw_ring_mpdu_ind = 1522
fw_ring_mgmt_subtype = 0:0, 1:0, 2:0, 3:0, 4:21, 5:0, 6:0, 7:0, 8:1501, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0
fw_ring_ctrl_subtype = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0
fw_ring_mcast_data_msdu = 0
fw_pkt_buf_ring_refill_cnt = 1567
fw_pkt_buf_ring_empty_cnt = 1
...
rx_suspend_cnt = 4
rx_suspend_fail_cnt = 0
rx_resume_cnt = 4
rx_resume_fail_cnt = 0
rx_ring_switch_cnt = 0
rx_ring_restore_cnt = 0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123071253.2202644-3-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, print_array_to_buf_index() decrements index unconditionally.
This may lead to invalid buffer access when array_len is zero.
Fix this by decrementing index only when array_len is non-zero.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: adf6df963c03 ("wifi: ath12k: Add support to parse requested stats_type")
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123071253.2202644-2-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Configure HE OBSS PD for spatial reuse in ath12k based on mac80211
HE SPR parameters in AP mode. This adds a pdev-level helper that
programs SRG/non-SRG OBSS PD thresholds, per-AC enablement, SR prohibit
control, and SRG/non-SRG BSS color and partial BSSID bitmaps via WMI.
Replace the previous vdev-level OBSS SPR command usage with the new
pdev-level configuration path, allowing firmware to apply HE spatial
reuse behavior according to the HE SPR/OBSS PD settings provided by
mac80211.
Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Wei Zhang <wei.zhang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123064817.364047-3-wei.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add WMI support for configuring SRG and non-SRG OBSS PD bitmaps at
the pdev level. The new commands allow the host to set BSS color bitmaps,
partial BSSID bitmaps, and the corresponding enable masks used for
SRG/non-SRG OBSS PD processing.
Introduce new WMI command IDs, TLV tags, a service flag
(WMI_TLV_SERVICE_SRG_SRP_SPATIAL_REUSE_SUPPORT), and a bitmap payload
structure required by these commands. These additions are needed to
support HE Spatial Reuse and firmware-managed OBSS PD behavior.
The APIs introduced in this patch will be utilized in an upcoming patch.
Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Wei Zhang <wei.zhang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123064817.364047-2-wei.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The firmware-name property was originally introduced to allow end-users
and integrators to select use-case-specific firmware for the WCN6855.
However, specifying firmware for an M.2 WLAN module in the Device Tree
is not appropriate. Instead, this functionality will be handled within
the ath11k driver. Therefore, the firmware-name property is now
deprecated.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260121095055.3683957-3-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
For M.2 WLAN chips, there is no suitable DTS node to specify the
firmware-name property. In addition, assigning firmware for the
M.2 PCIe interface causes chips that do not use usecase specific
firmware to fail. Therefore, abandoning the approach of specifying
firmware in DTS. As an alternative, propose a static lookup table
mapping device compatible to firmware names. Currently, only WCN6855
HW2.1 requires this.
However, support for the firmware-name property is retained to keep
the ABI backwards compatible.
For details on usecase specific firmware, see:
https://lore.kernel.org/all/20250522013444.1301330-3-miaoqing.pan@oss.qualcomm.com/.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Fixes: edbbc647c4f3 ("wifi: ath11k: support usercase-specific firmware overrides")
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260121095055.3683957-2-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
ath10k_sdio_fw_crashed_dump() calls ath10k_coredump_new() which requires
ar->dump_mutex to be held, as indicated by lockdep_assert_held() in that
function. However, the SDIO implementation does not acquire this lock,
unlike the PCI and SNOC implementations which properly hold the mutex.
Additionally, ar->stats.fw_crash_counter is documented as protected by
ar->data_lock in core.h, but the SDIO implementation modifies it without
holding this spinlock.
Add the missing mutex_lock()/mutex_unlock() around the coredump
operations, and add spin_lock_bh()/spin_unlock_bh() around the
fw_crash_counter increment, following the pattern used in
ath10k_pci_fw_dump_work() and ath10k_snoc_fw_crashed_dump().
Fixes: 3c45f21af84e ("ath10k: sdio: add firmware coredump support")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123045822.2221549-1-n7l8m4@u.northwestern.edu
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
