| Age | Commit message (Collapse) | Author |
|---|
|
The driver started using dimlib but fails to select the corresponding
symbol, which results in a link failure:
x86_64-linux-ld: drivers/net/ethernet/huawei/hinic3/hinic3_irq.o: in function `hinic3_poll':
hinic3_irq.c:(.text+0x179): undefined reference to `net_dim'
x86_64-linux-ld: drivers/net/ethernet/huawei/hinic3/hinic3_irq.o: in function `hinic3_rx_dim_work':
hinic3_irq.c:(.text+0x1fb): undefined reference to `net_dim_get_rx_moderation'
Fixes: b35a6fd37a00 ("hinic3: Add adaptive IRQ coalescing with DIM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260205161530.1308504-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The skb extension ids range from 0 .. 7 to fit their bits as flags into
a single byte. The ids are automatically enumnerated in enum skb_ext_id
in skbuff.h, where SKB_EXT_NUM is defined as the last value.
When having 8 skb extension ids (0 .. 7), SKB_EXT_NUM becomes 8 which is
a valid value for SKB_EXT_NUM.
Fixes: 96ea3a1e2d31 ("can: add CAN skb extension infrastructure")
Link: https://lore.kernel.org/netdev/aXoMqaA7b2CqJZNA@strlen.de/
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260205-skb_ext-v1-1-9ba992ccee8b@hartkopp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In prestera_ethtool_set_fecparam(), the error message is opposite of
the condition checking PRESTERA_PORT_TCVR_SFP. FEC configuration is
not allowed on SFP ports, but the message says "non-SFP ports", which
does not match the condition. However, FEC may be required depending on
the transceiver, cable, or mode, and firmware already validates invalid
combinations.
Remove the SFP transceiver check and let firmware handle validation.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://patch.msgid.link/20260205091958.231413-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using kmem_cache_free_bulk() in fq_gc() was not optimal.
1) It needs an array.
2) It is only saving cpu cycles for large batches.
The automatic array forces a stack canary, which is expensive.
In practice fq_gc was finding zero, one or two flows at most
per round.
Remove the array, use kmem_cache_free().
This makes fq_enqueue() smaller and faster.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-79 (-79)
Function old new delta
fq_enqueue 1629 1550 -79
Total: Before=24886583, After=24886504, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260204190034.76277-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, unhash_nsid() scans the entire system for each netns being
killed, leading to O(L_dying_net * M_alive_net * N_id) complexity, as
__peernet2id() also performs a linear search in the IDR.
Optimize this to O(M_alive_net * N_id) by batching unhash operations. Move
unhash_nsid() out of the per-netns loop in cleanup_net() to perform a
single-pass traversal over survivor namespaces.
Identify dying peers by an 'is_dying' flag, which is set under net_rwsem
write lock after the netns is removed from the global list. This batches
the unhashing work and eliminates the O(L_dying_net) multiplier.
To minimize the impact on struct net size, 'is_dying' is placed in an
existing hole after 'hash_mix' in struct net.
Use a restartable idr_get_next() loop for iteration. This avoids the
unsafe modification issue inherent to idr_for_each() callbacks and allows
dropping the nsid_lock to safely call sleepy rtnl_net_notifyid().
Clean up redundant nsid_lock and simplify the destruction loop now that
unhashing is centralized.
Signed-off-by: Qiliang Yuan <yuanql9@chinatelecom.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204074854.3506916-1-realwujing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the for loops with calls to crypto_unregister_ahashes(). In
img_register_algs(), return 'err' immediately and remove the goto
statement to simplify the error handling code.
Convert img_unregister_algs() to a void function since its return value
is never used.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Test vector was generated using a software implementation and then double
checked using a hardware implementation on NXP P2020 (talitos). The
encryption part is identical to authenc(hmac(sha1),cbc(des3_ede)),
only HMAC is different.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
persistent_ram_save_old() can be called multiple times for the same
persistent_ram_zone (e.g., via ramoops_pstore_read -> ramoops_get_next_prz
for PSTORE_TYPE_DMESG records).
Currently, the function only allocates prz->old_log when it is NULL,
but it unconditionally updates prz->old_log_size to the current buffer
size and then performs memcpy_fromio() using this new size. If the
buffer size has grown since the first allocation (which can happen
across different kernel boot cycles), this leads to:
1. A heap buffer overflow (OOB write) in the memcpy_fromio() calls
2. A subsequent OOB read when ramoops_pstore_read() accesses the buffer
using the incorrect (larger) old_log_size
The KASAN splat would look similar to:
BUG: KASAN: slab-out-of-bounds in ramoops_pstore_read+0x...
Read of size N at addr ... by task ...
The conditions are likely extremely hard to hit:
0. Crash with a ramoops write of less-than-record-max-size bytes.
1. Reboot: ramoops registers, pstore_get_records(0) reads old crash,
allocates old_log with size X
2. Crash handler registered, timer started (if pstore_update_ms >= 0)
3. Oops happens (non-fatal, system continues)
4. pstore_dump() writes oops via ramoops_pstore_write() size Y (>X)
5. pstore_new_entry = 1, pstore_timer_kick() called
6. System continues running (not a panic oops)
7. Timer fires after pstore_update_ms milliseconds
8. pstore_timefunc() → schedule_work() → pstore_dowork() → pstore_get_records(1)
9. ramoops_get_next_prz() → persistent_ram_save_old()
10. buffer_size() returns Y, but old_log is X bytes
11. Y > X: memcpy_fromio() overflows heap
Requirements:
- a prior crash record exists that did not fill the record size
(almost impossible since the crash handler writes as much as it
can possibly fit into the record, capped by max record size and
the kmsg buffer almost always exceeds the max record size)
- pstore_update_ms >= 0 (disabled by default)
- Non-fatal oops (system survives)
Free and reallocate the buffer when the new size differs from the
previously allocated size. This ensures old_log always has sufficient
space for the data being copied.
Fixes: 201e4aca5aa1 ("pstore/ram: Should update old dmesg buffer before reading")
Signed-off-by: Sai Ritvik Tanksalkar <stanksal@purdue.edu>
Link: https://patch.msgid.link/20260201132240.2948732-1-stanksal@purdue.edu
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
In persistent_ram_vmap(), vmap() may return NULL on failure.
If offset is non-zero, adding offset_in_page(start) causes the function
to return a non-NULL pointer even though the mapping failed.
persistent_ram_buffer_map() therefore incorrectly returns success.
Subsequent access to prz->buffer may dereference an invalid address
and cause crashes.
Add proper NULL checking for vmap() failures.
Signed-off-by: Ruipeng Qi <ruipengqi3@gmail.com>
Link: https://patch.msgid.link/20260203020358.3315299-1-ruipengqi3@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
This is a USB HID device which includes an I2C controller and 8 GPIO pins.
The binding allows describing the chip's gpio and i2c controller in DT,
with the i2c controller being bound to a subnode named "i2c". This is
intended to be used in configurations where the CP2112 is permanently
connected in hardware.
Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260127-cp2112-dt-v13-1-6448ddd4bf22@plexus.com
|
|
Use devm_kzalloc() to manage the memory allocation of the smbus structure
and devm_request_region() to manage the I/O port region.
This simplifies the error handling paths in the probe function by removing
manual cleanup and allows for the removal of the explicit cleanup in the
remove function.
Signed-off-by: Filippo Muscherà <filippo.muschera@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260202131304.8524-2-filippo.muschera@gmail.com
|
|
Remove space between function name and open parenthesis in
MODULE_DEVICE_TABLE and MODULE_AUTHOR to comply with kernel
coding style.
Signed-off-by: Filippo Muscherà <filippo.muschera@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260202131304.8524-1-filippo.muschera@gmail.com
|
|
Commit f5d3ef25d238 ("rust: devres: get rid of Devres' inner Arc") did
attempt to optimize away the internal reference count of Devres.
However, without an internal reference count, we can't support cases
where Devres is indirectly nested, resulting into a deadlock.
Such indirect nesting easily happens in the following way:
A registration object (which is guarded by devres) hold a reference
count of an object that holds a device resource guarded by devres
itself.
For instance a drm::Registration holds a reference of a drm::Device. The
drm::Device itself holds a device resource in its private data.
When the drm::Registration is dropped by devres, and it happens that it
did hold the last reference count of the drm::Device, it also drops the
device resource, which is guarded by devres itself.
Thus, resulting into a deadlock in the Devres destructor of the device
resource, as in the following backtrace.
sysrq: Show Blocked State
task:rmmod state:D stack:0 pid:1331 tgid:1331 ppid:1330 task_flags:0x400100 flags:0x00000010
Call trace:
__switch_to+0x190/0x294 (T)
__schedule+0x878/0xf10
schedule+0x4c/0xcc
schedule_timeout+0x44/0x118
wait_for_common+0xc0/0x18c
wait_for_completion+0x18/0x24
_RINvNtCs4gKlGRWyJ5S_4core3ptr13drop_in_placeINtNtNtCsgzhNYVB7wSz_6kernel4sync3arc3ArcINtNtBN_6devres6DevresmEEECsRdyc7Hyps3_15rust_driver_pci+0x68/0xe8 [rust_driver_pci]
_RINvNvNtCsgzhNYVB7wSz_6kernel6devres16register_foreign8callbackINtNtCs4gKlGRWyJ5S_4core3pin3PinINtNtNtB6_5alloc4kbox3BoxINtNtNtB6_4sync3arc3ArcINtB4_6DevresmEENtNtB1A_9allocator7KmallocEEECsRdyc7Hyps3_15rust_driver_pci+0x34/0xc8 [rust_driver_pci]
devm_action_release+0x14/0x20
devres_release_all+0xb8/0x118
device_release_driver_internal+0x1c4/0x28c
driver_detach+0x94/0xd4
bus_remove_driver+0xdc/0x11c
driver_unregister+0x34/0x58
pci_unregister_driver+0x20/0x80
__arm64_sys_delete_module+0x1d8/0x254
invoke_syscall+0x40/0xcc
el0_svc_common+0x8c/0xd8
do_el0_svc+0x1c/0x28
el0_svc+0x54/0x1d4
el0t_64_sync_handler+0x84/0x12c
el0t_64_sync+0x198/0x19c
In order to fix this, re-introduce the internal reference count.
Reported-by: Boris Brezillon <boris.brezillon@collabora.com>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/288089-General/topic/.E2.9C.94.20Deadlock.20caused.20by.20nested.20Devres/with/571242651
Reported-by: Markus Probst <markus.probst@posteo.de>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/288089-General/topic/.E2.9C.94.20Devres.20inside.20Devres.20stuck.20on.20cleanup/with/571239721
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://gitlab.freedesktop.org/panfrost/linux/-/merge_requests/56#note_3282757
Fixes: f5d3ef25d238 ("rust: devres: get rid of Devres' inner Arc")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20260205222529.91465-1-dakr@kernel.org
[ Call clone() prior to devm_add_action(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
While we handle pte_lockptr() == pmd_lockptr() correctly in
zap_pte_table_if_empty(), we don't handle it in zap_empty_pte_table(),
making the spin_trylock() always fail and forcing us onto the slow path.
So let's handle the scenario where pte_lockptr() == pmd_lockptr() better,
which can only happen if CONFIG_SPLIT_PTE_PTLOCKS is not set.
This is only relevant once we unlock CONFIG_PT_RECLAIM on architectures
that are not x86-64.
Link: https://lkml.kernel.org/r/20260119220708.3438514-3-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some cleanups for PT table reclaim code, triggered by a false-positive
warning we might start to see soon after we unlocked pt-reclaim on
architectures besides x86-64.
This patch (of 2):
The pte-table reclaim code is only called from memory.c, while zapping
pages, and it better also stays that way in the long run. If we ever have
to call it from other files, we should expose proper high-level helpers
for zapping if the existing helpers are not good enough.
So, let's move the code over (it's not a lot) and slightly clean it up a
bit by:
- Renaming the functions.
- Dropping the "Check if it is empty PTE page" comment, which is now
self-explaining given the function name.
- Making zap_pte_table_if_empty() return whether zapping worked so the
caller can free it.
- Adding a comment in pte_table_reclaim_possible().
- Inlining free_pte() in the last remaining user.
- In zap_empty_pte_table(), switch from pmdp_get_lcokless() to
pmd_clear(), we are holding the PMD PT lock.
By moving the code over, compilers can also easily figure out when
zap_empty_pte_table() does not initialize the pmdval variable, avoiding
false-positive warnings about the variable possibly not being initialized.
Link: https://lkml.kernel.org/r/20260119220708.3438514-1-david@kernel.org
Link: https://lkml.kernel.org/r/20260119220708.3438514-2-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The PT_RECLAIM can work on all architectures that support
MMU_GATHER_RCU_TABLE_FREE, except for those that have selected
HAVE_ARCH_TLB_REMOVE_TABLE,so make PT_RECLAIM depends on
MMU_GATHER_RCU_TABLE_FREE && !HAVE_ARCH_TLB_REMOVE_TABLE.
BTW, change PT_RECLAIM to be enabled by default, since nobody should want
to turn it off.
Link: https://lkml.kernel.org/r/83b034810935a9ff18e425b085e065bb0acb28f3.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
For architectures that define __HAVE_ARCH_TLB_REMOVE_TABLE, the page
tables at the pmd/pud level are generally not of struct ptdesc type, and
do not have pt_rcu_head member, thus these architectures cannot support
PT_RECLAIM.
In preparation for enabling PT_RECLAIM on more architectures, convert
__HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config,
so that we can make conditional judgments in Kconfig.
Link: https://lkml.kernel.org/r/5ebfa3d4b56e63c6906bda5eccaa9f7194d3a86b.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Tested-by: Andreas Larsson <andreas@gaisler.com> [sparc, UP&SMP]
Acked-by: Andreas Larsson <andreas@gaisler.com> [sparc]
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On a 64-bit system, madvise(MADV_DONTNEED) may cause a large number of
empty PTE page table pages (such as 100GB+). To resolve this problem,
first enable MMU_GATHER_RCU_TABLE_FREE to prepare for enabling the
PT_RECLAIM feature, which resolves this problem.
Link: https://lkml.kernel.org/r/e2217546504668b8a87a39eb0e378839339a1bb4.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On a 64-bit system, madvise(MADV_DONTNEED) may cause a large number of
empty PTE page table pages (such as 100GB+). To resolve this problem,
first enable MMU_GATHER_RCU_TABLE_FREE to prepare for enabling the
PT_RECLAIM feature, which resolves this problem.
Link: https://lkml.kernel.org/r/b827939046dbc94bc7c585cdbed8522baab75b15.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On a 64-bit system, madvise(MADV_DONTNEED) may cause a large number of
empty PTE page table pages (such as 100GB+). To resolve this problem,
first enable MMU_GATHER_RCU_TABLE_FREE to prepare for enabling the
PT_RECLAIM feature, which resolves this problem.
Link: https://lkml.kernel.org/r/0d17f00a724f77aaca2da7c847acd490c3a47571.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On a 64-bit system, madvise(MADV_DONTNEED) may cause a large number of
empty PTE page table pages (such as 100GB+). To resolve this problem,
first enable MMU_GATHER_RCU_TABLE_FREE to prepare for enabling the
PT_RECLAIM feature, which resolves this problem.
Link: https://lkml.kernel.org/r/bd1b11bc1a13686aeba81a40194f87b369d62661.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On a 64-bit system, madvise(MADV_DONTNEED) may cause a large number of
empty PTE page table pages (such as 100GB+). To resolve this problem,
first enable MMU_GATHER_RCU_TABLE_FREE to prepare for enabling the
PT_RECLAIM feature, which resolves this problem.
Link: https://lkml.kernel.org/r/3380f40a89b73c488202c85f9a8abf99fb08543b.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com> [alpha]
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "enable PT_RECLAIM on more 64-bit architectures", v4.
This series aims to enable PT_RECLAIM on more 64-bit architectures.
On a 64-bit system, madvise(MADV_DONTNEED) may cause a large number of
empty PTE page table pages (such as 100GB+). To resolve this problem, we
need to enable PT_RECLAIM, which depends on MMU_GATHER_RCU_TABLE_FREE.
For these architectures that define its own __tlb_remove_table(), since
their page tables are not of type struct ptdesc, they cannot be supported
PT_RECLAIM.
Therefore, this series first enables MMU_GATHER_RCU_TABLE_FREE on all
64-bit architectures, then converts __HAVE_ARCH_TLB_REMOVE_TABLE to
CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config, and finally makes PT_RECLAIM
depend on MMU_GATHER_RCU_TABLE_FREE && !HAVE_ARCH_TLB_REMOVE_TABLE. This
way, PT_RECLAIM can be enabled by default on most 64-bit architectures.
Of course, this will also be enabled on some 32-bit architectures that
already support MMU_GATHER_RCU_TABLE_FREE. That's fine, PT_RECLAIM works
well on all 32-bit architectures as well. Although the benefit isn't
significant, there's still memory that can be reclaimed. Perhaps
PT_RECLAIM can be enabled on all 32-bit architectures in the future.
This patch (of 8):
Generally, the asm/tlb.h will include asm-generic/tlb.h, so change
mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h. This is a
preparation for enabling CONFIG_PT_RECLAIM on other architectures, such as
alpha.
Link: https://lkml.kernel.org/r/cover.1769515122.git.zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/befca537d10c6bf8d531b1ee0a8af1e3b31352b0.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The 'memory_idle_ms_percentiles' array in DAMON_STAT is updated frequently
by the kernel to reflect the latest idle time statistics. Marking it as
'__read_mostly' is inappropriate for data that is regularly written to, as
it can lead to cache pollution in the read-mostly section.
Remove the '__read_mostly' annotation to accurately reflect the
variable's usage pattern.
Link: https://lkml.kernel.org/r/20260130085603.1814-1-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, zsmalloc creates kmem_cache of handles and zspages for each
pool, which may be suboptimal from the memory usage point of view (extra
internal fragmentation per pool). Systems that create multiple zsmalloc
pools may benefit from shared common zsmalloc caches.
Make handles and zspages kmem caches global. The memory savings depend on
particular setup and data patterns and can be found via slabinfo.
Link: https://lkml.kernel.org/r/20260117025406.799428-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some of the memory management source files are missing
SPDX-License-Identifier lines. Add appropriate IDs
to these files (mostly GPL-2.0, but one LGPL-2.1).
Link: https://lkml.kernel.org/r/20260204213101.1754183-1-tim.bird@sony.com
Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the %pe printk format specifier to report error pointers directly
instead of printing PTR_ERR() as a long value. This improves clarity,
produces more readable error messages.
This instance was flagged by the Coccinelle script
(misc/ptr_err_to_pe.cocci) as an opportunity to adopt %pe.
Found by: make coccicheck MODE=report M=mm/
No functional change intended.
Link: https://lkml.kernel.org/r/581a26f22fb4c6ce04aeb7ee0d703fe64454ac7f.1770230135.git.chandna.sahil@gmail.com
Signed-off-by: Sahil Chandna <chandna.sahil@gmail.com>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the %pe printk format specifier to report error pointers directly
instead of printing PTR_ERR() as a long value. This improves clarity,
produces more readable error messages.
This instance was flagged by the Coccinelle script
(misc/ptr_err_to_pe.cocci) as an opportunity to adopt %pe.
Found by: make coccicheck MODE=report M=mm/
No functional change intended
Link: https://lkml.kernel.org/r/80a6643657a60e75ddf48b4869b3e7fdc101f855.1770230135.git.chandna.sahil@gmail.com
Signed-off-by: Sahil Chandna <chandna.sahil@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix a typo in a comment: max_readhead -> max_readahead.
Link: https://lkml.kernel.org/r/20260127152535.321951-1-cheng20011202@gmail.com
Signed-off-by: Wilson Zeng <cheng20011202@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In META's fleet, we observed high-level cgroups showing zero file memcg
stats while their descendants had non-zero values. Investigation using
drgn revealed that these parent cgroups actually had negative file stats,
aggregated from their children.
This issue became more frequent after deploying thp-always more widely,
pointing to a correlation with THP file collapsing. The root cause is
that collapse_file() assumes old folios and the new THP belong to the same
node and memcg. When this assumption breaks, stats become skewed. The
bug affects not just memcg stats but also per-numa stats, and not just
NR_FILE_PAGES but also NR_SHMEM.
The assumption breaks in scenarios such as:
1. Small folios allocated on one node while the THP gets allocated on a
different node.
2. A package downloader running in one cgroup populates the page cache,
while a job in a different cgroup executes the downloaded binary.
3. A file shared between processes in different cgroups, where one
process faults in the pages and khugepaged (or madvise(COLLAPSE))
collapses them on behalf of the other.
Fix the accounting by explicitly incrementing stats for the new THP and
decrementing stats for the old folios being replaced.
Link: https://lkml.kernel.org/r/20260130042925.2797946-1-shakeel.butt@linux.dev
Fixes: f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Kiryl Shutsemau <kas@kernel.org>
Acked-by: David Hildenbrand (arm) <david@kernel.org>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
vma_map_pages currently calls vm_insert_page on each individual page in
the mapping, which creates significant overhead because we are repeatedly
spinlocking. Instead, we should batch insert pages using vm_insert_pages,
which amortizes the cost of the spinlock.
Tested through watching hardware accelerated video on a MTK ChromeOS
device. This particular path maps both a V4L2 buffer and a GEM allocated
buffer into userspace and converts the contents from one pixel format to
another. Both vb2_mmap() and mtk_gem_object_mmap() exercise this pathway.
Link: https://lkml.kernel.org/r/20260128225648.2938636-1-greenjustin@chromium.org
Signed-off-by: Justin Green <greenjustin@chromium.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Arjun Roy <arjunroy@google.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, DAMON defines two identical structures for representing address
ranges: damon_system_ram_region and damon_addr_range. Both structures
share the same semantic interpretation of a half-open interval [start,
end), where the start address is inclusive and the end address is
exclusive.
This duplication adds unnecessary redundancy and increases maintenance
overhead. This patch replaces all uses of damon_system_ram_region with
the more generic damon_addr_range structure, ensuring a unified type
representation for address ranges within the DAMON subsystem. The change
simplifies the codebase, improves readability, and avoids potential
inconsistencies in future modifications.
Link: https://lkml.kernel.org/r/20260129100845.281734-1-lienze@kylinos.cn
Signed-off-by: Enze Li <lienze@kylinos.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace snprintf("%s", ...) with the faster and more direct strscpy().
Link: https://lkml.kernel.org/r/20260126174516.236968-1-thorsten.blum@linux.dev
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the new zs_obj_read_sg_*() APIs in zswap_decompress(), instead of
zs_obj_read_*() APIs returning a linear address. The SG list is passed
directly to the crypto API, simplifying the logic and dropping the
workaround that copies highmem addresses to a buffer. The crypto API
should internally linearize the SG list if needed.
This avoids the memcpy() in zsmalloc for objects spanning multiple pages,
although an equivalent operation will be done internally by acomp/scomp.
However, in the future compression algorithms could support handling
discontiguous SG lists, completely eliminating the copying for spanning
objects.
Zsmalloc fills an SG list up to 2 entries in size, so change the input SG
list to fit 2 entries.
Update the incompressible entries path to use memcpy_from_sglist() to copy
the data to the folio. Opportunistically set dlen to PAGE_SIZE in the
same code path (rather that at the top of the function) to make it
clearer.
Drop the goto in zswap_compress() as the code now is not simple enough for
an if-else statement instead. Rename 'decomp_ret' to 'ret' and reuse it
to keep the intermediate return value of crypto_acomp_decompress() to keep
line lengths manageable.
No functional change intended.
Link: https://lkml.kernel.org/r/20260121013615.2906368-1-yosry.ahmed@linux.dev
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add more code to debug the PAT PDC firmware.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Enhance output when running PAT firmware, which is helpful when
developing the QEMU emulator. The added code is behind an ifdef,
so no performance overhead for normal kernels.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
PDC PAT defines this optional function. Testing on my C8000 workstation
and a rp3440 server did not indicate that they provide such counter.
Nevertheless, add the function since we should try to use such a
counter if it's available. In Qemu it should be simple to add it.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The hardware IDs are 32-bit unsigned integers, so print them as 4-digit
hex numbers. Additionally fix some whitespace glitches.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
If device_register() fails, put_device() is the correct way to
drop the device reference.
Found by code review.
Fixes: 1070c9655b90 ("[PA-RISC] Fix must_check warnings in drivers.c")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The recent commit "hfsplus: ensure sb->s_fs_info is always cleaned up"
[1] introduced a custom ->kill_sb() handler (hfsplus_kill_super) that
cleans up the s_fs_info structure (including the NLS table) on
superblock destruction.
However, the error handling path in hfsplus_fill_super() still calls
unload_nls() before returning an error. Since the VFS layer calls
->kill_sb() when fill_super fails, this results in unload_nls() being
called twice for the same sbi->nls pointer: once in hfsplus_fill_super()
and again in hfsplus_kill_super() (via delayed_free).
Remove the explicit unload_nls() call from the error path in
hfsplus_fill_super() to rely solely on the cleanup in ->kill_sb().
[1] https://lore.kernel.org/r/20251201222843.82310-3-mehdi.benhadjkhelifa@gmail.com/
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20260203043806.GF3183987@ZenIV/
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Link: https://lore.kernel.org/r/20260204170440.1337261-1-shardul.b@mpiricsoftware.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
- Fix documentation typos (Shawn Lin)
- Add struct p2pdma_provider kernel doc (Leon Romanovsky)
- Remove useless devres WARN_ON() (Philipp Stanner)
* pci/misc:
PCI: Remove useless WARN_ON() from devres
PCI/P2PDMA: Add missing struct p2pdma_provider documentation
Documentation: PCI: Fix typos in msi-howto.rst
|
|
- Add rcar-host OF Kconfig dependency to avoid objtool no-cfi warning
(Nathan Chancellor)
* pci/controller/misc:
PCI: rcar-host: Add OF Kconfig dependency to avoid objtool no-cfi warning
|
|
- Fix IRQ domain leak when MSI allocation fails (Haotian Zhang)
* pci/controller/xilinx:
PCI: xilinx: Fix INTx IRQ domain leak in error paths
|
|
- Relax Kconfig so tegra194 can be built for platforms beyond Tegra194
(Vidya Sagar)
* pci/controller/tegra194:
PCI: dwc: tegra194: Broaden architecture dependency
|
|
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear down
MSI domains to be built as modules (Aaron Kling)
- Export tegra_cpuidle_pcie_irqs_in_use(), which disables Tegra CC6 while
PCI IRQs are in use, so pci-tegra can be built as a module (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
* pci/controller/tegra:
PCI: tegra: Allow building as a module
cpuidle: tegra: Export tegra_cpuidle_pcie_irqs_in_use()
irqdomain: Export irq_domain_free_irqs()
|
