| Age | Commit message (Collapse) | Author |
|---|
|
into clk-for-6.19
Merge Kaanapali RPMh, TCSR and global clock controllers through a topic
branch, so they can be made available in the DeviceTree branch as well.
|
|
Add device tree bindings for the global clock controller on Qualcomm
Kaanapali platform.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251030-gcc_kaanapali-v2-v2-3-a774a587af6f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for TCSR Clock Controller for Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251030-gcc_kaanapali-v2-v2-2-a774a587af6f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the documentation for RPMH clock controller for Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251030-gcc_kaanapali-v2-v2-1-a774a587af6f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Stefan Wiehler says:
====================
Fix SCTP diag locking issues
- Hold RCU read lock while iterating over address list in
inet_diag_msg_sctpaddrs_fill()
- Prevent TOCTOU out-of-bounds write
- Hold sock lock while iterating over address list in sctp_sock_dump_one()
====================
Link: https://patch.msgid.link/20251028161506.3294376-1-stefan.wiehler@nokia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move address list traversal in inet_assoc_attr_size() under the sock
lock to avoid holding the RCU read lock.
Suggested-by: Xin Long <lucien.xin@gmail.com>
Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251028161506.3294376-4-stefan.wiehler@nokia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the following path not holding the sock lock,
sctp_diag_dump() -> sctp_for_each_endpoint() -> sctp_ep_dump()
make sure not to exceed bounds in case the address list has grown
between buffer allocation (time-of-check) and write (time-of-use).
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251028161506.3294376-3-stefan.wiehler@nokia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With CONFIG_PROVE_RCU_LIST=y and by executing
$ netcat -l --sctp &
$ netcat --sctp localhost &
$ ss --sctp
one can trigger the following Lockdep-RCU splat(s):
WARNING: suspicious RCU usage
6.18.0-rc1-00093-g7f864458e9a6 #5 Not tainted
-----------------------------
net/sctp/diag.c:76 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by ss/215:
#0: ffff9c740828bec0 (nlk_cb_mutex-SOCK_DIAG){+.+.}-{4:4}, at: __netlink_dump_start+0x84/0x2b0
#1: ffff9c7401d72cd0 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_sock_dump+0x38/0x200
stack backtrace:
CPU: 0 UID: 0 PID: 215 Comm: ss Not tainted 6.18.0-rc1-00093-g7f864458e9a6 #5 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x90
lockdep_rcu_suspicious.cold+0x4e/0xa3
inet_sctp_diag_fill.isra.0+0x4b1/0x5d0
sctp_sock_dump+0x131/0x200
sctp_transport_traverse_process+0x170/0x1b0
? __pfx_sctp_sock_filter+0x10/0x10
? __pfx_sctp_sock_dump+0x10/0x10
sctp_diag_dump+0x103/0x140
__inet_diag_dump+0x70/0xb0
netlink_dump+0x148/0x490
__netlink_dump_start+0x1f3/0x2b0
inet_diag_handler_cmd+0xcd/0x100
? __pfx_inet_diag_dump_start+0x10/0x10
? __pfx_inet_diag_dump+0x10/0x10
? __pfx_inet_diag_dump_done+0x10/0x10
sock_diag_rcv_msg+0x18e/0x320
? __pfx_sock_diag_rcv_msg+0x10/0x10
netlink_rcv_skb+0x4d/0x100
netlink_unicast+0x1d7/0x2b0
netlink_sendmsg+0x203/0x450
____sys_sendmsg+0x30c/0x340
___sys_sendmsg+0x94/0xf0
__sys_sendmsg+0x83/0xf0
do_syscall_64+0xbb/0x390
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251028161506.3294376-2-stefan.wiehler@nokia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The devlink param "ts_coarse" doesn't indicate that we get coarse
timestamps, but rather that the PHC clock adjusments are coarse as the
frequency won't be continuously adjusted. Adjust the devlink parameter
name to reflect that.
The Coarse terminlogy comes from the dwmac register naming, update the
documentation to better explain what the parameter is about.
With this change, the parameter can now be adjusted using:
devlink dev param set <dev> name phc_coarse_adj value true cmode runtime
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20251030182454.182406-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Describe panel Tearing Effect (TE) GPIO line.
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20251103-s6e3fc2x01-v6-4-d4eb4abaefa4@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
We can DSI pin from 8mA to 2mA while suspend, do it.
In theory, should give us extra 2 hours of idle battery life.
cosmetic: sort pinctrl properties.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20251103-s6e3fc2x01-v6-3-d4eb4abaefa4@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As these pins won't be used outside the group, let's group them.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20251103-s6e3fc2x01-v6-2-d4eb4abaefa4@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the compatible to reflect combination of DDIC and panel.
Original compatible describing only the DDIC used, but omit describing
the panel used (Samsung AMS641RW), which we have no way to detect.
There are two additional supplies used by the panel, both are GPIO
controlled and are left enabled by the bootloader for continuous splash.
Previously these were (incorrectly) modelled as pinctrl. Describe them
properly so that the panel can control them.
Fixes: 288ef8a42612 ("arm64: dts: sdm845: add oneplus6/6t devices")
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20251103-s6e3fc2x01-v6-1-d4eb4abaefa4@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Horatiu Vultur says:
====================
net: phy: micrel: lan8842 erratas
Add two erratas to the lan8842. The errata document can be found here [1]
The two erratas are:
- module 2 ("Analog front-end not optimized for PHY-side shorted center taps").
- module 7 ("1000BASE-T PMA EEE TX wake timer is non-compliant")
====================
Link: https://patch.msgid.link/20251031121629.814935-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add errata for lan8842. The errata document can be found here [1].
This is fixing the module 7 ("1000BASE-T PMA EEE TX wake timer is
non-compliant")
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/LAN8842-Errata-DS80001172.pdf
Fixes: 5a774b64cd6a ("net: phy: micrel: Add support for lan8842")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add errata for lan8842. The errata document can be found here [1].
This is fixing the module 2 ("Analog front-end not optimized for
PHY-side shorted center taps").
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/LAN8842-Errata-DS80001172.pdf
Fixes: 5a774b64cd6a ("net: phy: micrel: Add support for lan8842")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251101183446.32134-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit introduces interrupt support for RTL8221B (C45 mode).
Interrupts are mapped on the VEND2 page. VEND2 registers are only
accessible via C45 reads and cannot be accessed by C45 over C22.
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
[Enable only link state change interrupts]
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251102152644.1676482-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jonas Gorski says:
====================
net: dsa: b53: minor fdb related fixes
While investigating and fixing/implenting proper ARL support for
bcm63xx, I encountered multiple minor issues in the current ARL
implementation:
* The ARL multicast support was not properly enabled for older chips,
and instead a potentially reserved bit was toggled.
* While traversing the ARL table, "Search done" triggered one final
entry which will be invalid for 4 ARL bin chips, and failed to stop
the search on chips with only one result register.
* For chips where we have only one result register, we only traversed at
most half the maximum entries.
I also had a fix for IVL_SVL_SELECT which is only valid for some chips,
but since this would only have an effect for !vlan_enabled, and we
always have that enabled, it isn't really worth fixing (and rather drop
the !vlan_enabled paths).
====================
Link: https://patch.msgid.link/20251102100758.28352-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When iterating over the ARL table we stop at max ARL entries / 2, but
this is only valid if the chip actually returns 2 results at once. For
chips with only one result register we will stop before reaching the end
of the table if it is more than half full.
Fix this by only dividing the maximum results by two if we have a chip
with more than one result register (i.e. those with 4 ARL bins).
Fixes: cd169d799bee ("net: dsa: b53: Bound check ARL searches")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-4-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The switch clears the ARL_SRCH_STDN bit when the search is done, i.e. it
finished traversing the ARL table.
This means that there will be no valid result, so we should not attempt
to read and process any further entries.
We only ever check the validity of the entries for 4 ARL bin chips, and
only after having passed the first entry to the b53_fdb_copy().
This means that we always pass an invalid entry at the end to the
b53_fdb_copy(). b53_fdb_copy() does check the validity though before
passing on the entry, so it never gets passed on.
On < 4 ARL bin chips, we will even continue reading invalid entries
until we reach the result limit.
Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the New Control register bit 1 is either reserved, or has a different
function:
Out of Range Error Discard
When enabled, the ingress port discards any frames
if the Length field is between 1500 and 1536
(excluding 1500 and 1536) and with good CRC.
The actual bit for enabling IP multicast is bit 0, which was only
explicitly enabled for BCM5325 so far.
For older switch chips, this bit defaults to 0, so we want to enable it
as well, while newer switch chips default to 1, and their documentation
says "It is illegal to set this bit to zero."
So drop the wrong B53_IPMC_FWD_EN define, enable the IP multicast bit
also for other switch chips. While at it, rename it to (B53_)IP_MC as
that is how it is called in Broadcom code.
Fixes: 63cc54a6f073 ("net: dsa: b53: Fix egress flooding settings")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jonas Gorski says:
====================
net: dsa: b53: fix bcm63xx rgmii user ports with speed < 1g
It seems that the integrated switch in bcm63xx does not support polling
external PHYs for link configuration. While the appropriate registers
seem to exist with expected content, changing them does nothing.
This results in user ports with external PHYs only working in 1000/fd,
and not in other modes, despite linking up.
Fix this by writing the link result into the port state override
register, like we already do for fixed links.
With this, ports with lower speeds can successfully transmit and receive
packets.
This also aligns the behaviour with the old bcm63xx_enetsw driver for
those ports.
====================
Link: https://patch.msgid.link/20251101132807.50419-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM63XX's switch does not support MDIO scanning of external phys, so its
MACs needs to be manually configured for autonegotiated link speeds.
So b53_force_port_config() and b53_force_link() accordingly also when
mode is MLO_AN_PHY for those ports.
Fixes lower speeds than 1000/full on rgmii ports 4 - 7.
This aligns the behaviour with the old bcm63xx_enetsw driver for those
ports.
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251101132807.50419-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no guarantee that the port state override registers have their
default values, as not all switches support being reset via register or
have a reset GPIO.
So when forcing port config, we need to make sure to clear all fields,
which we currently do not do for the speed and flow control
configuration. This can cause flow control stay enabled, or in the case
of speed becoming an illegal value, e.g. configured for 1G (0x2), then
setting 100M (0x1), results in 0x3 which is invalid.
For PORT_OVERRIDE_SPEED_2000M we need to make sure to only clear it on
supported chips, as the bit can have different meanings on other chips,
e.g. for BCM5389 this controls scanning PHYs for link/speed
configuration.
Fixes: 5e004460f874 ("net: dsa: b53: Add helper to set link parameters")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251101132807.50419-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The b53 entry was missing the brcm tag driver, so add it.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20251029181216.3f35f8ba@kernel.org/
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251101103954.29816-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The error message printed when hinic3_configure() fails incorrectly
reports "Failed to init txrxq irq", which does not match the actual
operation performed. The hinic3_configure() function sets up various
device resources such as MTU and RSS parameters , not IRQ initialization.
Update the log to "Failed to configure device resources" to make the
message accurate and clearer for debugging.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Fan Gong <gongfan1@huawei.com>
Link: https://patch.msgid.link/20251031112654.46187-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add SoC ID table entry for Qualcomm QCS6490.
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251103-qcs6490_soc_id-v1-2-c139dd1e32c8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add unique ID for Qualcomm QCS6490 SoC.
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251103-qcs6490_soc_id-v1-1-c139dd1e32c8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
HWKM v1 and v2 differ slightly in wrapped key size and the bit fields for
certain status registers and operating mode (legacy or standard).
Add support to select HWKM version based on the major and minor revisions.
Use this HWKM version to select wrapped key size and to configure the bit
fields in registers for operating modes and hardware status.
Support for SCM calls for wrapped keys is being added in the TrustZone for
few SoCs with HWKM v1. Existing check of qcom_scm_has_wrapped_key_support()
API ensures that HWKM is used only if these SCM calls are supported in
TrustZone for that SoC.
Signed-off-by: Neeraj Soni <neeraj.soni@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251030161012.3391239-1-neeraj.soni@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The call to device_node_to_regmap() in airoha_mdio_probe() can return
an ERR_PTR() if regmap initialization fails. Currently, the driver
stores the pointer without validation, which could lead to a crash
if it is later dereferenced.
Add an IS_ERR() check and return the corresponding error code to make
the probe path more robust.
Fixes: 67e3ba978361 ("net: mdio: Add MDIO bus controller for Airoha AN7583")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251031161607.58581-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When fixed regulators are not named with "regulator-" prefix, they can
not be neatly grouped and sorted together.
Rename the vph-pwr-regulator, to facilitate the incoming addition of
additional fixed regulators.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251102-rb3gen2-regulator-sort-v1-1-908879d240be@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Due to commit abd61d1ff8f0 ("scripts: sphinx-pre-install: move it to
tools/docs"), checkpatch.pl --self-test=patterns reported a non-matching
file entry in DOCUMENTATION SCRIPTS. Clearly, there are now multiple
documentation scripts, all located in Documentation/sphinx/ and tools/docs/
and Mauro is the maintainer of those.
Update the DOCUMENTATION SCRIPTS section to cover these directories. While
at it, also make the DOCUMENTATION section cover the subdirectories of
tools/docs/.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251103075948.26026-1-lukas.bulwahn@redhat.com>
|
|
A refactoring of Device::drvdata_obtain() broke T::disconnect() in the
USB abstractions.
"""
error[E0599]: no method named `data` found for struct `core::pin::Pin<kbox::Box<T, Kmalloc>>` in the current scope
--> rust/kernel/usb.rs:92:34
|
92 | T::disconnect(intf, data.data());
| ^^^^ method not found in `core::pin::Pin<kbox::Box<T, Kmalloc>>`
error: aborting due to 1 previous error
For more information about this error, try `rustc --explain E0599`.
make[2]: *** [rust/Makefile:553: rust/kernel.o] Error 1
make[1]: *** [/builddir/build/BUILD/kernel-6.18.0-build/kernel-next-20251103/linux-6.18.0-0.0.next.20251103.436.vanilla.fc44.x86_64/Makefile:1316: prepare] Error 2
make: *** [Makefile:256: __sub-make] Error 2
"""
This slipped through, since the USB abstractions are globally disabled.
However, the USB tree recently enabled them, hence it showed up in
linux-next.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/all/1c8afbc0-e888-4702-9e4e-fa8aef0f97ae@leemhuis.info/
Fixes: 6bbaa93912bf ("rust: device: narrow the generic of drvdata_obtain()")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://patch.msgid.link/20251103110115.1925072-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Our documentation-related tools are spread out over various directories;
several are buried in the scripts/ dumping ground. That makes them harder
to discover and harder to maintain.
Recent work has started accumulating our documentation-related tools in
/tools/docs. This series nearly completes that task, moving most of the
rest of our various utilities there, hopefully fixing up all of the
relevant references in the process.
The one exception is scripts/kernel-doc; that move turned up some other
problems, so I have dropped it until those are ironed out.
At the end, rather than move the old, Perl kernel-doc, I simply removed it.
|
|
In the past, people would link to third-party mailing list archives
(like marc.info) for any kernel-related discussions. Now that there
is lore archive under kernel.org infrastructure, replace these marc
links
Note that the only remaining marc link is "Re: Memory mapping on Cirrus
EP9315" [1] since that thread is not available at lore [2].
[1]: https://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2
[2]: https://lore.kernel.org/linux-arm-kernel/?q=b%3A%22Re%3A+Memory+mapping+on+Cirrus+EP9315%22
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Acked-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251031043358.23709-1-bagasdotme@gmail.com>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/alexs/linux into alex
Chinese translation docs for 6.18
This is the Chinese translation subtree for 6.18. It includes
the following changes:
- docs/zh_CN: Add rust Chinese translations
- docs/zh_CN: Add scsi Chinese translations
- docs/zh_CN: Add gfs2 Chinese translations
- Add some other Chinese translations and fixes
Above patches are tested by 'make htmldocs'
|
|
In the Identation section there is a list of instructions in
second-person. The offending line uses third-person singular.
Signed-off-by: Gabriele Ricciardi <gricciardi-coding@pm.me>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251101223027.171874-1-gricciardi-coding@pm.me>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Fix an off-by-one error in versalnet_edac
* tag 'edac_urgent_for_v6.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versalnet: Fix off by one in handle_error()
|
|
The `rustdoc` modifiers bug [1] was fixed in Rust 1.90.0 [2], for which
we added a workaround in commit abbf9a449441 ("rust: workaround `rustdoc`
target modifiers bug").
However, `rustdoc`'s doctest generation still has a similar issue [3],
being fixed at [4], which does not affect us because we apply the
workaround to both, and now, starting with Rust 1.91.0 (released
2025-10-30), `-Zsanitizer` is a target modifier too [5], which means we
fail with:
RUSTDOC TK rust/kernel/lib.rs
error: mixing `-Zsanitizer` will cause an ABI mismatch in crate `kernel`
--> rust/kernel/lib.rs:3:1
|
3 | //! The `kernel` crate.
| ^
|
= help: the `-Zsanitizer` flag modifies the ABI so Rust crates compiled with different values of this flag cannot be used together safely
= note: unset `-Zsanitizer` in this crate is incompatible with `-Zsanitizer=kernel-address` in dependency `core`
= help: set `-Zsanitizer=kernel-address` in this crate or unset `-Zsanitizer` in `core`
= help: if you are sure this will not cause problems, you may use `-Cunsafe-allow-abi-mismatch=sanitizer` to silence this error
A simple way around is to add the sanitizer to the list in the existing
workaround (especially if we had not started to pass the sanitizer
flags in the previous commit, since in that case that would not be
necessary). However, that still applies the workaround in more cases
than necessary.
Instead, only modify the doctests flags to ignore the check for
sanitizers, so that it is more local (and thus the compiler keeps checking
it for us in the normal `rustdoc` calls). Since the previous commit
already treated the `rustdoc` calls as kernel objects, this should allow
us in the future to easily remove this workaround when the time comes.
By the way, the `-Cunsafe-allow-abi-mismatch` flag overwrites previous
ones rather than appending, so it needs to be all done in the same flag.
Moreover, unknown modifiers are rejected, and thus we have to gate based
on the version too.
Finally, `-Zsanitizer-cfi-normalize-integers` is not affected (in Rust
1.91.0), so it is not needed in the workaround for the moment.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/issues/144521 [1]
Link: https://github.com/rust-lang/rust/pull/144523 [2]
Link: https://github.com/rust-lang/rust/issues/146465 [3]
Link: https://github.com/rust-lang/rust/pull/148068 [4]
Link: https://github.com/rust-lang/rust/pull/138736 [5]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Link: https://patch.msgid.link/20251102212853.1505384-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Even if normally `build_error` isn't a kernel object, it should still
be treated as such so that we pass the same flags. Similarly, `rustdoc`
targets are never kernel objects, but we need to treat them as such.
Otherwise, starting with Rust 1.91.0 (released 2025-10-30), `rustc`
will complain about missing sanitizer flags since `-Zsanitizer` is a
target modifier too [1]:
error: mixing `-Zsanitizer` will cause an ABI mismatch in crate `build_error`
--> rust/build_error.rs:3:1
|
3 | //! Build-time error.
| ^
|
= help: the `-Zsanitizer` flag modifies the ABI so Rust crates compiled with different values of this flag cannot be used together safely
= note: unset `-Zsanitizer` in this crate is incompatible with `-Zsanitizer=kernel-address` in dependency `core`
= help: set `-Zsanitizer=kernel-address` in this crate or unset `-Zsanitizer` in `core`
= help: if you are sure this will not cause problems, you may use `-Cunsafe-allow-abi-mismatch=sanitizer` to silence this error
Thus explicitly mark them as kernel objects.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/138736 [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Link: https://patch.msgid.link/20251102212853.1505384-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
KASAN reports a global-out-of-bounds access when running these nfit
tests: clear.sh, pmem-errors.sh, pfn-meta-errors.sh, btt-errors.sh,
daxdev-errors.sh, and inject-error.sh.
[] BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x769f/0x7840 [nfit_test]
[] Read of size 4 at addr ffffffffc03ea01c by task ndctl/1215
[] The buggy address belongs to the variable:
[] handle+0x1c/0x1df4 [nfit_test]
nfit_test_search_spa() uses handle[nvdimm->id] to retrieve a device
handle and triggers a KASAN error when it reads past the end of the
handle array. It should not be indexing the handle array at all.
The correct device handle is stored in per-DIMM test data. Each DIMM
has a struct nfit_mem that embeds a struct acpi_nfit_memdev that
describes the NFIT device handle. Use that device handle here.
Fixes: 10246dc84dfc ("acpi nfit: nfit_test supports translate SPA")
Cc: stable@vger.kernel.org
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251031234227.1303113-1-alison.schofield@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
finish_task_switch()
sched_ext_free() was called from __put_task_struct() when the last reference
to the task is dropped, which could be long after the task has finished
running. This causes cgroup-related problems:
- ops.init_task() can be called on a cgroup which didn't get ops.cgroup_init()'d
during scheduler load, because the cgroup might be destroyed/unlinked
while the zombie or dead task is still lingering on the scx_tasks list.
- ops.cgroup_exit() could be called before ops.exit_task() is called on all
member tasks, leading to incorrect exit ordering.
Fix by moving it to finish_task_switch() to be called right after the final
context switch away from the dying task, matching when sched_class->task_dead()
is called. Rename it to sched_ext_dead() to match the new calling context.
By calling sched_ext_dead() before cgroup_task_dead(), we ensure that:
- Tasks visible on scx_tasks list have valid cgroups during scheduler load,
as cgroup_mutex prevents cgroup destruction while the task is still linked.
- All member tasks have ops.exit_task() called and are removed from scx_tasks
before the cgroup can be destroyed and trigger ops.cgroup_exit().
This fix is made possible by the cgroup_task_dead() split in the previous patch.
This also makes more sense resource-wise as there's no point in keeping
scheduler side resources around for dead tasks.
Reported-by: Dan Schatzberg <dschatzberg@meta.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup into for-6.19
Pull cgroup/for-6.19 to receive:
16dad7801aad ("cgroup: Rename cgroup lifecycle hooks to cgroup_task_*()")
260fbcb92bbe ("cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()")
d245698d727a ("cgroup: Defer task cgroup unlink until after the task is done switching out")
These are needed for the sched_ext cgroup exit ordering fix.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
When a task exits, css_set_move_task(tsk, cset, NULL, false) unlinks the task
from its cgroup. From the cgroup's perspective, the task is now gone. If this
makes the cgroup empty, it can be removed, triggering ->css_offline() callbacks
that notify controllers the cgroup is going offline resource-wise.
However, the exiting task can still run, perform memory operations, and schedule
until the final context switch in finish_task_switch(). This creates a confusing
situation where controllers are told a cgroup is offline while resource
activities are still happening in it. While this hasn't broken existing
controllers, it has caused direct confusion for sched_ext schedulers.
Split cgroup_task_exit() into two functions. cgroup_task_exit() now only calls
the subsystem exit callbacks and continues to be called from do_exit(). The
css_set cleanup is moved to the new cgroup_task_dead() which is called from
finish_task_switch() after the final context switch, so that the cgroup only
appears empty after the task is truly done running.
This also reorders operations so that subsys->exit() is now called before
unlinking from the cgroup, which shouldn't break anything.
Cc: Dan Schatzberg <dschatzberg@meta.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
cgroup_task_free()
Currently, cgroup_task_exit() adds thread group leaders with live member
threads to their css_set's dying_tasks list (so cgroup.procs iteration can
still see the leader), and cgroup_task_release() later removes them with
list_del_init(&task->cg_list).
An upcoming patch will defer the dying_tasks list addition, moving it from
cgroup_task_exit() (called from do_exit()) to a new function called from
finish_task_switch(). However, release_task() (which calls
cgroup_task_release()) can run either before or after finish_task_switch(),
creating a race where cgroup_task_release() might try to remove the task from
dying_tasks before or while it's being added.
Move the list_del_init() from cgroup_task_release() to cgroup_task_free() to
fix this race. cgroup_task_free() runs from __put_task_struct(), which is
always after both paths, making the cleanup safe.
Cc: Dan Schatzberg <dschatzberg@meta.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The current names cgroup_exit(), cgroup_release(), and cgroup_free() are
confusing because they look like they're operating on cgroups themselves when
they're actually task lifecycle hooks. For example, cgroup_init() initializes
the cgroup subsystem while cgroup_exit() is a task exit notification to
cgroup. Rename them to cgroup_task_exit(), cgroup_task_release(), and
cgroup_task_free() to make it clear that these operate on tasks.
Cc: Dan Schatzberg <dschatzberg@meta.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Rename "guest_paddr" variables in vm_userspace_mem_region_add() and
vm_mem_add() to KVM's de facto standard "gpa", both for consistency and
to shorten line lengths.
Opportunistically fix the indentation of the
vm_userspace_mem_region_add() declaration.
Link: https://patch.msgid.link/20251007223625.369939-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
There are use cases, for example virtual machine hosts, that create
"persistent" memory regions using memmap= option on x86 or dummy
pmem-region device tree nodes on DT based systems.
Both these options are inflexible because they create static regions and
the layout of the "persistent" memory cannot be adjusted without reboot
and sometimes they even require firmware update.
Add a ramdax driver that allows creation of DIMM devices on top of
E820_TYPE_PRAM regions and devicetree pmem-region nodes.
The DIMMs support label space management on the "device" and provide a
flexible way to access RAM using fsdax and devdax.
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20251026153841.752061-2-rppt@kernel.org
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
