| Age | Commit message (Collapse) | Author |
|---|
|
Higher steal time thresholds favor low utilization scenarios, which is not
the common case for s390. Set steal time threshold to a lower value to
prioritize vertical high and medium CPUs sooner and allow high utilization
scenarios to benefit from it.
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
pcpu_delegate() never returns to its caller. If the target CPU is the
current CPU, it calls __pcpu_delegate(), whose delegate function is not
supposed to return. In any case, even if __pcpu_delegate() unexpectedly
returns, pcpu_delegate() sends SIGP_STOP to the current CPU and waits
in an infinite loop. Annotate pcpu_delegate() with the __noreturn
attribute to improve compiler optimizations.
Also annotate smp_call_ipl_cpu() accordingly since it always calls
pcpu_delegate().
[hca: Merge two patches from Thorsten Blum]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
s390_handle_damage() ends by calling the non-returning function
disabled_wait() and therefore also never returns. Annotate it with the
__noreturn compiler attribute to improve compiler optimizations.
Remove the unreachable infinite while loop.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Remove the repeated word "the" in comments.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In target mode, the clock signal is controlled by the master. Target does
not need to check, calculate and configure the clock frequency division.
The target can directly use the root clock to sample the SCL signal.
Therefore, remove check, calculation and frequency division function of
the clock for target mode.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251024055211.408440-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Heiko Carstens says:
====================
Add the Dat-Enhancement facility 1 to the list of facilities which are
required to start the kernel. The facility provides the CSPG and IDTE
instructions. In particular the CSPG instruction can be used to replace a
valid page table entry with a different page table entry, which also
differs in the page frame real address.
Without the CSPG instruction it is possible to use the CSP instruction to
change valid page table entries, however it only allows to change the lower
or higher 32 bits of such entries, which means it cannot be used to change
the page frame real address of valid page table entries.
Given that there is code around (e.g. HugeTLB vmemmap optimization) which
requires to change valid page table entries of the kernel mapping, without
the detour over an invalid page table entry, make the CSPG instruction
unconditionally available.
The Dat-Enhancement facility 1 is available since z990, which is older than
the currently supported minimum architecture (z10). Therefore adding this
the architecture level set shouldn't cause any problems.
====================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since sdma hardware configure postpone to transfer phase, have to disable
dma request before dma transfer setup because there is a hardware
limitation on sdma event enable(ENBLn) as below:
"It is thus essential for the Arm platform to program them before any DMA
request is triggered to the SDMA, otherwise an unpredictable combination
of channels may be started."
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Link: https://patch.msgid.link/20251024055320.408482-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
During firmware download, if the size of the firmware is too small,
it wrongly assumes the firmware download is successful. If there is
size mismatch with chunk's header, invalid memory is accessed.
Fix these issues by throwing error during these cases.
Fixes: 4cc9bd8d7b32 (ASoc: tas2783A: Add soundwire based codec driver)
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202510291226.2R3fbYNh-lkp@intel.com/
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251030151637.566-1-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The bus_find_device_by_name() function returns a device pointer with an
incremented reference count, but the original code was missing put_device()
calls in some return paths, leading to reference count leaks.
Fix this by ensuring put_device() is called before function exit after
bus_find_device_by_name() succeeds
This follows the same pattern used elsewhere in the kernel where
bus_find_device_by_name() is properly paired with put_device().
Found via static analysis and code review.
Fixes: 4f8ef33dd44a ("ASoC: soc_sdw_utils: skip the endpoint that doesn't present")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://patch.msgid.link/20251029071804.8425-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The probe function enables regulators at the beginning
but fails to disable them in its error handling path.
If any operation after enabling the regulators fails,
the probe will exit with an error, leaving the regulators
permanently enabled, which could lead to a resource leak.
Add a proper error handling path to call regulator_bulk_disable()
before returning an error.
Fixes: 9a397f473657 ("ASoC: cs4271: add regulator consumer support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251105062246.1955-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The CSPG instruction is part of the Dat-Enhancement facility 1, which
is always available. Given that it can be used everywhere where also
the CSP instruction can be used, replace CSP with CSPG everywhere.
This allows to remove the csp() inline assembly. Also remove the
unused gmap_pmdp_csp() function.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Remove cpu_has_idte(). The IDTE instruction is part of the
Dat-Enhancement facility 1, which is always available.
Therefore remove the helper and now superfluous code.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add the Dat-Enhancement facility 1 to the list of facilities which are
required to start the kernel. The facility provides the CSPG and IDTE
instructions. In particular the CSPG instruction can be used to replace a
valid page table entry with a different page table entry, which also
differs in the page frame real address.
Without the CSPG instruction it is possible to use the CSP instruction to
change valid page table entries, however it only allows to change the lower
or higher 32 bits of such entries, which means it cannot be used to change
the page frame real address of valid page table entries.
Given that there is code around (e.g. HugeTLB vmemmap optimization) which
requires to change valid page table entries of the kernel mapping, without
the detour over an invalid page table entry, make the CSPG instruction
unconditionally available.
The Dat-Enhancement facility 1 is available since z990, which is older than
the currently supported minimum architecture (z10). Therefore adding this
to the architecture level set shouldn't cause any problems.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The validator is not happy:
Warning: drivers/regulator/pf9453-regulator.c:303 This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Update the kernel-doc accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251106114628.2302762-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SDCA specification uses Q7.8 volume format.
This patch adds a field to indicate whether it is SDCA volume control
and supports the volume settings.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251106093335.1363237-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Component drivers can prepare snd_pcm_hardware struct based on the hardware
capabilities which information should not be discarded.
Only touch the rates, channels_max and formats if they were left to 0,
otherwise keep the provided configuration intact for the parameter cross
checking decision.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251029073600.13624-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
LP5009 supports 9 LED outputs that are grouped into 3 modules.
Cc: stable@vger.kernel.org
Fixes: 242b81170fb8 ("leds: lp50xx: Add the LP50XX family of the RGB LED driver")
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
Link: https://patch.msgid.link/20251022063305.972190-1-christian@klarinett.li
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The DRM_GEM_SHMEM_HELPER helper requires MMU enabled because it uses
vmf_insert_pfn() in its mmap implementation. On NOMMU configurations
(e.g. some RISC-V randconfig builds), this symbol is unavailable and
selecting DRM_GEM_SHMEM_HELPER causes a modpost undefined reference:
ERROR: modpost: "vmf_insert_pfn" [drivers/gpu/drm/drm_shmem_helper.ko] undefined!
Normally, Kconfig prevents this helper from being selected when
CONFIG_MMU=n. However, in some randconfig builds (such as those used by
0day CI), select statements can override unmet dependencies, triggering
the issue.
Add an explicit dependency on MMU to DRM_PIXPAPER to prevent this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510280213.0rlYA4T3-lkp@intel.com/
Fixes: 0c4932f6ddf8 ("drm/tiny: pixpaper: Fix missing dependency on DRM_GEM_SHMEM_HELPER")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251028-bar-v1-1-edfbd13fafff@gmail.com
|
|
Raju Rangoju says:
====================
amd-xgbe: introduce support for ethtool selftests
This patch series introduces support for ethtool selftests, which helps
in finding the misconfiguration of HW. Makes use of network selftest
packet creation infrastructure.
Supports the following tests:
- MAC loopback selftest
- PHY loopback selftest
- Split header selftest
- Jumbo frame selftest
====================
Link: https://patch.msgid.link/20251031111555.774425-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Adds support for jumbo frame selftest. Works only for
mtu size greater than 1500.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20251031111555.774425-5-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Adds support for ethtool split header selftest. Performs
UDP and TCP check to ensure split header selft test works
for both packet types.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20251031111555.774425-4-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for PHY loopback testing via ethtool self-test.
The test uses phy_loopback() which enables PHY-level loopback
through the PHY driver's set_loopback callback if provided,
else uses the genphy_loopback().
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20251031111555.774425-3-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for ethtool selftest for MAC loopback. This includes the
sanity check and helps in finding the misconfiguration of HW. Uses the
existing selftest infrastructure to create test packets.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20251031111555.774425-2-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Export the network selftest packet creation infrastructure to allow
network drivers to reuse the existing selftest framework instead of
duplicating packet creation code.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20251031111811.775434-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit
199747106934 ("edac: add a new per-dimm API and make the old per-virtual-rank API obsolete")
introduced a new per-DIMM sysfs interface for EDAC making the old
per-virtual-rank sysfs interface obsolete.
Since this new sysfs interface was introduced more than a decade ago, remove
the obsolete legacy interface.
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20251106015727.1987246-1-avadhut.naik@amd.com
|
|
The Lenovo Legion Go 2 takes a long time to resume from suspend.
This is due to it having an nvme resume handler that interferes
with IOMMU mappings. It is a common issue with older Lenovo
laptops. Adding it to that quirk list fixes this issue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4618
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251008135057.731928-1-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Xbox Ally features a Van Gogh SoC that has spurious interrupts
during resume. We get the following logs:
atkbd_receive_byte: 20 callbacks suppressed
atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
So, add the spurious_8042 quirk for it. It does not have a keyboard, so
this does not result in any functional loss.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251024152152.3981721-3-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The ROG Xbox Ally (non-X) SoC features a similar architecture to the
Steam Deck. While the Steam Deck supports S3 (s2idle causes a crash),
this support was dropped by the Xbox Ally which only S0ix suspend.
Since the handler is missing here, this causes the device to not suspend
and the AMD GPU driver to crash while trying to resume afterwards due to
a power hang.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20251024152152.3981721-2-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add support for the whole "Dell G" laptop family.
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20251103-family-supp-v1-5-a241075d1787@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add support for the whole "Alienware X" laptop family.
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20251103-family-supp-v1-4-a241075d1787@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add support for the whole "Alienware M" laptop family.
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20251103-family-supp-v1-3-a241075d1787@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The awcc_dmi_table[] uses DMI_MATCH() that supports partial matches. As
there is already "Alienware Area-51m" entry, "Alienware Area-51m R2" entry
is redundant.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20251103-family-supp-v1-2-a241075d1787@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Quirks are matched using dmi_first_match(), therefore move the
"Alienware m16 R1 AMD" entry above other m16 entries.
Reported-by: Cihan Ozakca <cozakca@outlook.com>
Fixes: e2468dc70074 ("Revert "platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1"")
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20251103-family-supp-v1-1-a241075d1787@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fix all kernel-doc warnings in <uapi/linux/isst_if.h>:
- don't use "[]" in the variable name in kernel-doc
- add a few missing entries
- change "power_domain" to "power_domain_id" in kernel-doc to match
the struct member name
- add a leading '@' on a few existing kernel-doc lines
- use '_' instead of '-' in struct member names
Examples (but not all 27 warnings):
Warning: include/uapi/linux/isst_if.h:63 struct member 'cpu_map'
not described in 'isst_if_cpu_maps'
Warning: ../include/uapi/linux/isst_if.h:95 struct member 'req_count'
not described in 'isst_if_io_regs'
Warning: include/uapi/linux/isst_if.h:132 struct member 'mbox_cmd'
not described in 'isst_if_mbox_cmds'
Warning: ../include/uapi/linux/isst_if.h:183 struct member 'supported'
not described in 'isst_core_power'
Warning: ../include/uapi/linux/isst_if.h:206 struct member
'power_domain_id' not described in 'isst_clos_param'
Warning: ../include/uapi/linux/isst_if.h:239 struct member 'assoc_info'
not described in 'isst_if_clos_assoc_cmds'
Warning: ../include/uapi/linux/isst_if.h:286 struct member 'sst_tf_support'
not described in 'isst_perf_level_info'
Warning: ../include/uapi/linux/isst_if.h:375 struct member 'trl_freq_mhz'
not described in 'isst_perf_level_data_info'
Warning: ../include/uapi/linux/isst_if.h:475 struct member 'max_buckets'
not described in 'isst_turbo_freq_info'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251023194615.180824-1-rdunlap@infradead.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Intel uncore frequency driver support for Pantherlake, Wildcatlake
and Novalake processors.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20251022211733.3565526-1-sathyanarayanan.kuppuswamy@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The newer HP Omen laptops, such as Omen 16-wf1xxx, use the same
WMI-based thermal profile interface as Victus 16-r1000 and 16-s1000
models.
Add the DMI board name "8C78" to the victus_s_thermal_profile_boards
list to enable proper fan and thermal mode control.
Tested on: HP Omen 16-wf1xxx (board 8C78)
Result:
* Fan RPMs are readable
* echo 0 | sudo tee /sys/devices/platform/hp-wmi/hwmon/*/pwm1_enable
allows the fans to run on max RPM.
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20251018111001.56625-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
HONOR MagicBook X16/X14 models produced in 2025 cannot use the Print
Screen and YOYO keys properly, with the system reporting them as
unknown key presses (codes: 0x028b and 0x028e).
To resolve this, a key_entry is added for both the HONOR Print Screen
key and the HONOR YOYO key, ensuring they function correctly on these
models.
Signed-off-by: Ston Jia <ston.jia@outlook.com>
Link: https://patch.msgid.link/20251029051804.220111-1-ston.jia@outlook.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
thermal profile support
This patch adds Victus 16-r0 (8bbe) and Victus 16-s0(8bd4, 8bd5) laptop
DMI board name into existing list
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20251015181042.23961-3-edip@medip.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add initial device tree support for the MusePi Pro board [1].
The board is using the SpacemiT K1/M1 SoC.
This device tree is adapted from the SpacemiT vendor tree [2] and
enables basic board functionality, including UART console, LED, eMMC,
Ethernet, and PDMA.
Link: https://developer.spacemit.com/documentation?token=YJtdwnvvViPVcmkoPDpcvwfVnrh&type=pdf [1]
Link: https://gitee.com/bianbu-linux/linux-6.6/blob/k1-bl-v2.2.y/arch/riscv/boot/dts/spacemit/k1-x_MUSE-Pi-Pro.dts [2]
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://lore.kernel.org/r/20251023-k1-musepi-pro-dts-v4-2-01836303e10f@linux.spacemit.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Document the compatible string for the MusePi Pro [1]. It is a 1.8-inch
single board computer based on the SpacemiT K1/M1 RISC-V SoC [2].
Here's a refined list of its core features:
- SoC: SpacemiT M1/K1, 8-core 64-bit RISC-V.
- Memory: LPDDR4X @ 2400MT/s, available in 8GB & 16GB options.
- Storage: Onboard eMMC 5.1 (64GB/128GB options), M.2 M-Key for NVMe
SSD (2230 size), and a microSD slot (UHS-II) for expansion.
- Display: HDMI 1.4 (1080P@60Hz) and 2-lane MIPI DSI FPC (1080P@60Hz).
- Connectivity: Onboard Wi-Fi 6 & Bluetooth 5.2, single Gigabit Ethernet
port (RJ45).
- USB: 4x USB 3.0 Type-A (host) and 1x USB 2.0 Type-C (device/OTG).
- Expansion: Full-size miniPCIe slot and a second M.2 M-Key (2230).
- GPIO: Standard 40-pin GPIO interface.
- MIPI: 1x 4-lane MIPI CSI FPC and 2x MIPI DSI FPC interfaces.
- Clock: Onboard RTC with battery support.
Link: https://developer.spacemit.com/documentation?token=YJtdwnvvViPVcmkoPDpcvwfVnrh&type=pdf [1]
Link: https://www.spacemit.com/en/key-stone-k1 [2]
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://lore.kernel.org/r/20251023-k1-musepi-pro-dts-v4-1-01836303e10f@linux.spacemit.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Historically the code to set up AT_HWCAP and AT_PLATFORM was only built
for 32bit x86 as it was intermingled with the vDSO passthrough code.
Now that vDSO passthrough has been removed, always pass through AT_HWCAP
and AT_PLATFORM.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251028-uml-remove-32bit-pseudo-vdso-v1-10-e930063eff5f@weissschuh.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are no users left.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251028-uml-remove-32bit-pseudo-vdso-v1-9-e930063eff5f@weissschuh.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
FIXADDR_USER_START and FIXADDR_USER_END are now always zero.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251028-uml-remove-32bit-pseudo-vdso-v1-8-e930063eff5f@weissschuh.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The only caller __access_ok() is already doing the same check through
__addr_range_nowrap().
Remove the redundant check.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251028-uml-remove-32bit-pseudo-vdso-v1-7-e930063eff5f@weissschuh.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
With the removal of the vDSO passthrough from the host,
FIXADDR_USER_START is always 0 and fixaddr_user_init() is dead code.
Remove it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251028-uml-remove-32bit-pseudo-vdso-v1-6-e930063eff5f@weissschuh.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
With the removal of the vDSO passthrough from the host,
FIXADDR_USER_START is always 0 and the gate area setup code is dead.
Remove it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251028-uml-remove-32bit-pseudo-vdso-v1-5-e930063eff5f@weissschuh.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Inheriting the vDSO from the host is problematic. The values read
from the time functions will not be correct for the UML kernel.
Furthermore the start and end of the vDSO are not stable or
detectable by userspace. Specifically the vDSO datapages start
before AT_SYSINFO_EHDR and the vDSO itself is larger than a single page.
This codepath is only used on 32bit x86 UML. In my testing with both
32bit and 64bit hosts the passthrough functionality has always been
disabled anyways due to the checks against envp in scan_elf_aux().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251028-uml-remove-32bit-pseudo-vdso-v1-4-e930063eff5f@weissschuh.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Setting all auxiliary vector values to default values if one of them
was not provided by the host will discard perfectly fine values.
Remove the elf_aux_platform fallback from the vDSO ones.
As zero is the correct fallback anyways, don't create a new conditional.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251028-uml-remove-32bit-pseudo-vdso-v1-3-e930063eff5f@weissschuh.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The generic UM code should not have references to x86-specific value.
Move the fallback into the x86-specific header.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251028-uml-remove-32bit-pseudo-vdso-v1-2-e930063eff5f@weissschuh.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Setting all auxiliary vector values to default values if one of them
was not provided by the host will discard perfectly fine values.
Move the elf_aux_platform fallback to its own conditional.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251028-uml-remove-32bit-pseudo-vdso-v1-1-e930063eff5f@weissschuh.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
