| Age | Commit message (Collapse) | Author |
|---|
|
Per Nathan, clang catches unused "static inline" functions in C files
since commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Linus said:
> So I entirely ignore W=1 issues, because I think so many of the extra
> warnings are bogus.
>
> But if this one in particular is causing more problems than most -
> some teams do seem to use W=1 as part of their test builds - it's fine
> to send me a patch that just moves bad warnings to W=2.
>
> And if anybody uses W=2 for their test builds, that's THEIR problem..
Here is the change to bump the warning from W=1 to W=2.
Fixes: 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build")
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251106105000.2103276-1-andriy.shevchenko@linux.intel.com
[nathan: Adjust comment as well]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
After subsystem of the device has crashed it sends a message with
command DEBUG_TRANSFER_INFO to kernel(host). Send ACK for that message
and then prepare to collect the ramdump of the subsystem
Steps of crashdump collection is as follows,
1) Device sends DEBUG_TRANSFER_INFO message indicating that device wants
to send crashdump.
2) Send an acknowledgment to that message either ACK or NACK.
a) NACK will inform the device that host will not download the
crashdump
b) ACK will inform the device that host will download the crashdump
3) Along with the DEBUG_TRANSFER_INFO we receive a table base address and
its length, use that to download that table from device.
a) This table is meta data of the crashdump and not the actual
crashdump.
4) After we respond as ACK for message received on step 1) we start
downloading the table. Use series of MEMORY_READ/MEMORY_READ_RSP SSR
commands to download the entire table.
5) Each entry in the table represents a segment of crashdump. Once the
table downloading is complete, iterate through each entry of table
and download each crashdump segment(same as table itself). Table entry
contains the memory base address and length along with other info.
6) After the entire crashdump is downloaded send DEBUG_TRANSFER_DONE
which marks that host is terminating the crashdump transfer. This
message can be send in both success or error case.
7) After receiving DEBUG_TRANSFER_DONE_RSP hand over the crashdump to
dev_coredumpv() and free all the necessary memory.
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <pkanojiy@codeaurora.org>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-4-zachary.mckevitt@oss.qualcomm.com
|
|
Subsystem restart (SSR) for a qaic device means that a NSP has crashed,
and will be restarted. However the restart process will lose any state
associated with activation, so the user will need to do some recovery.
While SSR has the provision to collect a crash dump, this patch does not
implement support for it.
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Co-developed-by: Troy Hanson <quic_thanson@quicinc.com>
Signed-off-by: Troy Hanson <quic_thanson@quicinc.com>
Co-developed-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: Fix minor checkpatch whitespace issues]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-3-zachary.mckevitt@oss.qualcomm.com
|
|
Expose sysfs files for each DBC representing the current state of that DBC.
For example, sysfs for DBC ID 0 and accel minor number 0 looks like this,
/sys/class/accel/accel0/dbc0_state
Following are the states and their corresponding values,
DBC_STATE_IDLE (0)
DBC_STATE_ASSIGNED (1)
DBC_STATE_BEFORE_SHUTDOWN (2)
DBC_STATE_AFTER_SHUTDOWN (3)
DBC_STATE_BEFORE_POWER_UP (4)
DBC_STATE_AFTER_POWER_UP (5)
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-2-zachary.mckevitt@oss.qualcomm.com
|
|
acpi_processor_setup_cstates() and acpi_processor_setup_cpuidle_cx()
are called after successfully obtaining power information. Among other
things, these setup functions check the C-state count against zero.
However, that check is done by acpi_processor_get_power_info_cst()
which will cause acpi_processor_get_power_info() to fail if it does
no pass, so the checks in the two functions mentioned above are
redundant.
Drop those redundant checks.
No intentional functional impact.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
[ rjw: Subject and changelog rewrite ]
Link: https://patch.msgid.link/20251105093647.3557248-1-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On 32-bit architectures, when GFP_NOFS is used, the file cache for write
operations cannot be allocated from the highmem and CMA.
Since mapping->gfp_mask is set to GFP_HIGHUSER_MOVABLE during inode
allocation, using mapping_gfp_mask(mapping) as the GFP flag of getting file
cache for writing is more efficient for 32-bit architectures.
Additionally, use FGP_NOFS to avoid potential deadlock issues caused by
GFP_FS in GFP_HIGHUSER_MOVABLE
Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
For 'always-on' and 'boot-on' regulators, the set_machine_constraints()
may enable supply before enabling the main regulator, however if the
latter fails, the function returns with an error but the supply remains
enabled.
When this happens, the regulator_register() function continues on the
error path where it puts the supply regulator. Since enabling the supply
is not balanced with a disable call, a warning similar to the following
gets issued from _regulator_put():
[ 1.603889] WARNING: CPU: 2 PID: 44 at _regulator_put+0x8c/0xa0
[ 1.603908] Modules linked in:
[ 1.603926] CPU: 2 UID: 0 PID: 44 Comm: kworker/u16:3 Not tainted 6.18.0-rc4 #0 NONE
[ 1.603938] Hardware name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7 (DT)
[ 1.603945] Workqueue: async async_run_entry_fn
[ 1.603958] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.603967] pc : _regulator_put+0x8c/0xa0
[ 1.603976] lr : _regulator_put+0x7c/0xa0
...
[ 1.604140] Call trace:
[ 1.604145] _regulator_put+0x8c/0xa0 (P)
[ 1.604156] regulator_register+0x2ec/0xbf0
[ 1.604166] devm_regulator_register+0x60/0xb0
[ 1.604178] rpm_reg_probe+0x120/0x208
[ 1.604187] platform_probe+0x64/0xa8
...
In order to avoid this, change the set_machine_constraints() function to
disable the supply if enabling the main regulator fails.
Fixes: 05f224ca6693 ("regulator: core: Clean enabling always-on regulators + their supplies")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20251107-regulator-disable-supply-v1-1-c95f0536f1b5@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPU via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However the function cppc_perf_ctrs_in_pcc() checks if the CPPC
perf-ctrs are in a PCC region for all the present CPUs, which breaks
when the kernel is booted with "nosmt=force".
Hence, limit the check only to the online CPUs.
Fixes: ae2df912d1a5 ("ACPI: CPPC: Disable FIE if registers in PCC regions")
Reviewed-by: "Mario Limonciello (AMD) (kernel.org)" <superm1@kernel.org>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://patch.msgid.link/20251107074145.2340-5-gautham.shenoy@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPUs via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However the function cppc_allow_fast_switch() checks for the validity
of the _CPC object for all the present CPUs. This breaks when the
kernel is booted with "nosmt=force".
Check fast_switch capability only on online CPUs
Fixes: 15eece6c5b05 ("ACPI: CPPC: Fix NULL pointer dereference when nosmp is used")
Reviewed-by: "Mario Limonciello (AMD) (kernel.org)" <superm1@kernel.org>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://patch.msgid.link/20251107074145.2340-4-gautham.shenoy@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPUs via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However the function acpi_cpc_valid() checks for the validity of the
_CPC object for all the present CPUs. This breaks when the kernel is
booted with "nosmt=force".
Hence check the validity of the _CPC objects of only the online CPUs.
Fixes: 2aeca6bd0277 ("ACPI: CPPC: Check present CPUs for determining _CPC is valid")
Reported-by: Christopher Harris <chris.harris79@gmail.com>
Closes: https://lore.kernel.org/lkml/CAM+eXpdDT7KjLV0AxEwOLkSJ2QtrsvGvjA2cCHvt1d0k2_C4Cw@mail.gmail.com/
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: "Mario Limonciello (AMD) (kernel.org)" <superm1@kernel.org>
Tested-by: Chrisopher Harris <chris.harris79@gmail.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://patch.msgid.link/20251107074145.2340-3-gautham.shenoy@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 279f838a61f9 ("x86/amd: Detect preferred cores in
amd_get_boost_ratio_numerator()") introduced the ability to detect the
preferred core on AMD platforms by checking if there at least two
distinct highest_perf values.
However, it uses for_each_present_cpu() to iterate through all the
CPUs in the platform, which is problematic when the kernel is booted
with "nosmt=force" commandline option.
Hence limit the search to only the online CPUs.
Fixes: 279f838a61f9 ("x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()")
Reported-by: Christopher Harris <chris.harris79@gmail.com>
Closes: https://lore.kernel.org/lkml/CAM+eXpdDT7KjLV0AxEwOLkSJ2QtrsvGvjA2cCHvt1d0k2_C4Cw@mail.gmail.com/
Reviewed-by: "Mario Limonciello (AMD) (kernel.org)" <superm1@kernel.org>
Tested-by: Chrisopher Harris <chris.harris79@gmail.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://patch.msgid.link/20251107074145.2340-2-gautham.shenoy@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Failing to set power off indicates an unrecoverable hardware or firmware
error. Update the driver to treat such a failure as a fatal condition
and stop further operations that depend on successful power state
transition.
This prevents undefined behavior when the hardware remains in an
unexpected state after a failed power-off attempt.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251106180521.1095218-1-lizhi.hou@amd.com
|
|
Enable Wildcat Lake platforms to achieve PMC information from
Intel PMC SSRAM Telemetry driver and substate requirements data
from telemetry region.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20251105215020.1984036-2-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Wildcat Lake PMT telemetry support.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20251105215020.1984036-1-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When apic=verbose is specified, the LAPIC timer calibration prints its results
to the console. At least while debugging virtualization code, the CPU and bus
frequencies are printed incorrectly.
Specifically, for a 1.7 GHz CPU with 1 GHz bus frequency and HZ=1000,
the log includes a superfluous 0 after the period:
..... calibration result: 999978
..... CPU clock speed is 1696.0783 MHz.
..... host bus clock speed is 999.0978 MHz.
Looking at the code, this only worked as intended for HZ=100. After the fix,
the correct frequency is printed:
..... calibration result: 999828
..... CPU clock speed is 1696.507 MHz.
..... host bus clock speed is 999.828 MHz.
There is no functional change to the LAPIC calibration here, beyond the
printing format changes.
[ bp: - Massage commit message
- Figures it should apply this patch about ~4 years later
- Massage it into the current code ]
Suggested-by: Markus Napierkowski <markus.napierkowski@cyberus-technology.de>
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20211030142148.143261-1-js@alien8.de
|
|
Introduce the function bdev_zone_start() as a more explicit (and clear)
replacement for ALIGN_DOWN() to get the start sector of a zone
containing a particular sector of a zoned block device.
Use this new helper in blkdev_get_zone_info() and
blkdev_report_zones_cached().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The helper function blk_zone_wp_offset() is called from
disk_zone_wplug_sync_wp_offset(), and again called from
blk_revalidate_seq_zone() right after the call to
disk_zone_wplug_sync_wp_offset().
Change disk_zone_wplug_sync_wp_offset() to return the value of obtained
with blk_zone_wp_offset() to avoid this double call, which simplifies a
little blk_revalidate_seq_zone().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_zone_wp_offset() is always called with a struct blk_zone obtained
from the device, that is, it will never see the BLK_ZONE_COND_ACTIVE
condition. However, handling this condition makes this function more
solid and will also avoid issues when propagating cached report requests
to underlying stacked devices is implemented. Add BLK_ZONE_COND_ACTIVE
as a new case in blk_zone_wp_offset() switch.
Also while at it, change the handling of the full condition to return
UINT_MAX for the zone write pointer to reflect the fact that the write
pointer of a full zone is invalid.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The HPA to DPA translation for poison injection assumes that the
base address starts from where the CXL region begins. When the
extended linear cache is active, the offset can be within the DRAM
region. Adjust the offset so that it correctly reflects the offset
within the CXL region.
[ dj: Add fixes tag from Alison ]
Fixes: c3dd67681c70 ("cxl/region: Add inject and clear poison by region offset")
Link: https://patch.msgid.link/20251031173224.3537030-5-dave.jiang@intel.com
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
SMB2_change_notify called smb2_validate_iov() but ignored the return
code, then kmemdup()ed using server provided OutputBufferOffset/Length.
Check the return of smb2_validate_iov() and bail out on error.
Discovered with help from the ZeroPath security tooling.
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: stable@vger.kernel.org
Fixes: e3e9463414f61 ("smb3: improve SMB3 change notification support")
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use the firmware node of the GPIO chip, not its label for software
node lookup
- fix invalid pointer access in GPIO debugfs
- drop unused functions from gpio-tb10x
- fix a regression in gpio-aggregator: restore the set_config()
callback in the driver
- correct schema $id path in ti,twl4030 DT bindings
* tag 'gpio-fixes-for-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tb10x: Drop unused tb10x_set_bits() function
gpio: aggregator: restore the set_config operation
gpiolib: fix invalid pointer access in debugfs
gpio: swnode: don't use the swnode's name as the key for GPIO lookup
dt-bindings: gpio: ti,twl4030: Correct the schema $id path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Check for reader catching up in ring_buffer_map_get_reader()
If the reader catches up to the writer in the memory mapped ring
buffer then calling rb_get_reader_page() will return NULL as there's
no pages left. But this isn't checked for before calling
rb_get_reader_page() and the return of NULL causes a warning.
If it is detected that the reader caught up to the writer, then
simply exit the routine
- Fix memory leak in histogram create_field_var()
The couple of the error paths in create_field_var() did not properly
clean up what was allocated. Make sure everything is freed properly
on error
- Fix help message of tools latency_collector
The help message incorrectly stated that "-t" was the same as
"--threads" whereas "--threads" is actually represented by "-e"
* tag 'trace-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/tools: Fix incorrcet short option in usage text for --threads
tracing: Fix memory leaks in create_field_var()
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Fix for potential infinite loop in kmalloc_nolock() when debugging
is enabled for the cache (Vlastimil Babka)
* tag 'slab-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: prevent infinite loop in kmalloc_nolock() with debugging
|
|
Add missing entries in C attribute list.
Link: https://patch.msgid.link/20251104232348.1954349-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Address two issues indicated by checkpatch:
- Trailing statements should be on next line.
- Prefer 'unsigned int' to bare use of 'unsigned'.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20251106045158.3198061-4-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
`compressed_size` can overflow, showing nonsensical values.
Change from `atomic_t` to `atomic64_t` to prevent overflow.
Fixes: a06c6f5d3cc9 ("PM: hibernate: Move to crypto APIs for LZO compression")
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/linux-pm/20251105180506.137448-1-safinaskar@gmail.com/
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Askar Safin <safinaskar@gmail.com>
Cc: 6.9+ <stable@vger.kernel.org> # 6.9+
Link: https://patch.msgid.link/20251106045158.3198061-3-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If image writing fails, a return code is passed up to the caller, but
none of the callers log anything to the log and so the only record
of it is the return code that userspace gets.
Adjust the logging so that the image size and speed of writing is
only emitted on success and if there is an error, it's saved to the
logs.
Fixes: a06c6f5d3cc9 ("PM: hibernate: Move to crypto APIs for LZO compression")
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/linux-pm/20251105180506.137448-1-safinaskar@gmail.com/
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Askar Safin <safinaskar@gmail.com>
Cc: 6.9+ <stable@vger.kernel.org> # 6.9+
[ rjw: Added missing braces after "else", changelog edits ]
Link: https://patch.msgid.link/20251106045158.3198061-2-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Remove the sync refill API that was added in this release, in
anticipation of doing it in a better way for the next release
- Fix type extension for calculating size off nr_pages, like we do
in other spots
* tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix types for region size calulation
io_uring/zcrx: remove sync refill uapi
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All fixes in the UFS driver.
The big contributor to the diffstats is the Intel controller S0ix/S3
fix which has to special case the suspend/resume patch for intel
controllers in ufshcd-pci.c"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix invalid probe error return value
scsi: ufs: ufs-pci: Set UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE for Intel ADL
scsi: ufs: core: Add a quirk to suppress link_startup_again
scsi: ufs: ufs-pci: Fix S0ix/S3 for Intel controllers
scsi: ufs: core: Revert "Make HID attributes visible"
scsi: ufs: core: Reduce link startup failure logging
scsi: ufs: core: Fix a race condition related to the "hid" attribute group
scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3)
|
|
s/i915_gem_object_get_frontbuffer/i915_gem_object_frontbuffer_lookup/
The i915_gem_object_get_frontbuffer() name is rather confusing wrt.
intel_frontbuffer_get(). Rename to i915_gem_object_frontbuffer_lookup()
to make things less confusing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Pull smb server fixes from Steve French:
- More safely detect RDMA capable devices correctly
* tag 'v6.18-rc4-smb-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: detect RDMA capable netdevs include IPoIB
ksmbd: detect RDMA capable lower devices when bridge and vlan netdev is used
|
|
The current attempted split between xe/i915 vs. display
for intel_frontbuffer is a mess:
- the i915 rcu leaks through the interface to the display side
- the obj->frontbuffer write-side is now protected by a display
specific spinlock even though the actual obj->framebuffer
pointer lives in a i915 specific structure
- the kref is getting poked directly from both sides
- i915_active is still on the display side
Clean up the mess by moving everything about the frontbuffer
lifetime management to the i915/xe side:
- the rcu usage is now completely contained in i915
- frontbuffer_lock is moved into i915
- kref is on the i915/xe side (xe needs the refcount as well
due to intel_frontbuffer_queue_flush()->intel_frontbuffer_ref())
- the bo (and its refcounting) is no longer on the display side
- i915_active is contained in i915
I was pondering whether we could do this in some kind of smaller
steps, and perhaps we could, but it would probably have to start
with a bunch of reverts (which for sure won't go cleanly anymore).
So not convinced it's worth the hassle.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-10-ville.syrjala@linux.intel.com
|
|
After upcoming intel_frontbuffer lifetime related changes we
won't need intel_frontbuffer::obj for anything apart from
getting at the display. Add a direct pointer for that instead
so that the obj pointer can be completely eliminated.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
I want to hide the kref from the high level frontbuffer code.
To that end abstract the kref_get() in intel_frontbuffer_queue_flush()
(which is the only high level function that needs this) as a new
intel_frontbuffer_ref().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Our fb_tracking.lock is serving a double duty:
- protects fb_tracking.busy_bits
- provides the write-side protection for obj->frontbuffer
Split obj->frontbuffer role into a separate lock so that
we can clean up the current mess with the frontbuffer lifetime
management.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
intel_frontbuffer_flush()
intel_bo_frontbuffer_flush_for_display() is a bit too low level
to be directly in the high level dirtyfb code. Move the calls
into intel_frontbuffer_flush().
There is a slight behavioural change here in that we now skip
the flush if the bo is not a current scanout buffer (front->bits
== 0). But that is fine as the flush will eventually happen via
the fb pinning code if/when the bo becomes a scanout buffer again.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
operation
Convert intel_bo_flush_if_display() to be an operation on the
frontbuffer object rather than the underlying gem bo. This
will help with cleaning up the frontbuffer xe/i915 vs. display
split.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Get rid of intel_frontbuffer_flip_{prepare,complete}() (and
the accompanying flip_bits) since they are unused.
I suppose these could technically provide a minor optimization
over intel_frontbuffer_flip() in that the flush would get
deferred further if new rendering were to sneak in between the
prepare() and complete() calls. But for correctness it should
not make any difference since another flush will anyway follow
once the new rendering finishes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Get rid of intel_frontbuffer_flip_{prepare,complete}() from
the overlay code and just use intel_frontbuffer_flip() instead.
The only difference between these are the light interactions
with the ORIGIN_CS busyness tracking, but since the only user
of this is the overlay/xf86-video-intel/Xv the buffer will
always be filled by the CPU and thus we'll never see any
ORIGIN_CS frontbuffer activity there anyway. Also I don't
think we actually have anything covered by the frontbuffer
tracking that affects the overlay (FBC is on the primary
plane, DRRS isn't currently enabled on the platforms with
overlay, and PSR doesn't exist in the hardware).
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-3-ville.syrjala@linux.intel.com
|
|
I don't even know why we have this DIRTYFB flush in the overlay
code. We'll anyway call intel_frontbuffer_flip() so there should
be no need to pretend that this is some kind of frontbuffer only
rendering operation.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-2-ville.syrjala@linux.intel.com
|
|
Somehow CONFIG_PSTORE_FIRMWARE ended up in this document when I intended
it to be CONFIG_CHROMEOS_PSTORE. Correct the configuration option and
make it clear that not all options are required.
Fixes: b1f02f005a2e ("Documentation: power: Add document on debugging shutdown hangs")
Reported-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
[ rjw: Fixes: tag ]
Link: https://patch.msgid.link/20251106142524.3841343-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Bit 31-30 usage table is already formatted as reST simple table, but it
is wrapped in literal code block instead. Unwrap it.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20251105124707.44736-2-bagasdotme@gmail.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
Fix the include of iommu-pages.h in the KUnit tests for the IOMMU
generic page-table code to make the tests compile again.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/all/9844d4cb-f517-478b-9911-b6dc1a963b8e@leemhuis.info/
Reported-by: "Longia, Amandeep Kaur" <amandeepkaur.longia@amd.com>
Closes: https://lore.kernel.org/all/e641c955-25ad-4eae-b3fe-4392966cf768@amd.com/
Fixes: 1dd4187f53c3 ("iommupt: Add a kunit test for Generic Page Table")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
During module loading, check if a callback function used by the
alternatives specified in the '.altinstruction' ELF section (if present)
is located in core kernel .text. If not fail module loading before
callback is called.
Reported-by: Fanqin Cui <cuifq1@chinatelecom.cn>
Closes: https://lore.kernel.org/all/20250807072700.348514-1-fanqincui@163.com/
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
[will: Folded in 'noinstr' tweak from Mark]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Disallow a module to load if SCS dynamic patching fails for its code. For
module loading, instead of running a dry-run to check for patching errors,
try to run patching in the first run and propagate any errors so module
loading will fail.
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Relocate the printk() calls from spectre_v4_mitigations_off() and
spectre_v2_mitigations_off() into setup_system_capabilities() function,
preventing hard lockups caused by printk calls in scheduler context:
| _raw_spin_lock_nested+168
| ttwu_queue+180 （rq_lock(rq, &rf); 2nd acquiring the rq->__lock）
| try_to_wake_up+548
| wake_up_process+32
| __up+88
| up+100
| __up_console_sem+96
| console_unlock+696
| vprintk_emit+428
| vprintk_default+64
| vprintk_func+220
| printk+104
| spectre_v4_enable_task_mitigation+344
| __switch_to+100
| __schedule+1028 (rq_lock(rq, &rf); 1st acquiring the rq->__lock)
| schedule_idle+48
| do_idle+388
| cpu_startup_entry+44
| secondary_start_kernel+352
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: shechenglong <shechenglong@xfusion.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Following the pattern established with other Spectre mitigations,
do not print a message when the CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
Kconfig option is disabled.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: shechenglong <shechenglong@xfusion.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Tidy up the implementation of force_pte_mapping() to make it easier to
read and introduce the split_leaf_mapping_possible() helper to reduce
code duplication in split_kernel_leaf_mapping() and
arch_kfence_init_pool().
Suggested-by: David Hildenbrand (Red Hat) <david@kernel.org>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Enter lazy_mmu mode while splitting a range of memory to pte mappings.
This causes barriers, which would otherwise be emitted after every pte
(and pmd/pud) write, to be deferred until exiting lazy_mmu mode.
For large systems, this is expected to significantly speed up fallback
to pte-mapping the linear map for the case where the boot CPU has
BBML2_NOABORT, but secondary CPUs do not. I haven't directly measured
it, but this is equivalent to commit 1fcb7cea8a5f ("arm64: mm: Batch dsb
and isb when populating pgtables").
Note that for the path from arch_kfence_init_pool(), we may sleep while
allocating memory inside the lazy_mmu mode. Sleeping is not allowed by
generic code inside lazy_mmu, but we know that the arm64 implementation
is sleep-safe. So this is ok and follows the same pattern already used
by split_kernel_leaf_mapping().
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
