| Age | Commit message (Collapse) | Author |
|---|
|
Kernel maps are encoded in PERF_RECORD_MMAP2 samples but "perf lock
report" and "perf lock contention" do not process MMAP2 samples.
Because of that, machine->vmlinux_map stays NULL and any later access
triggers a segmentation fault.
Fix it by adding ->mmap2() callbacks.
Fixes: 53b00ff358dc75b1 ("perf record: Make --buildid-mmap the default")
Reported-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Tested-by: Tycho Andersen (AMD) <tycho@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Renesas RZ/V2N and RZ/V2H USB3.0 Core Clock DT Binding Definitions
USB3.0 core clock DT binding definitions for the Renesas RZ/V2N
(R9A09G056) and RZ/V2H (R9A09G057) SoCs, shared by driver and DT source
files.
|
|
Add RSCI clock and reset entries.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251027154615.115759-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
reason
To pick the changes in:
9d7dfb95da2cb5c1 ("KVM: VMX: Inject #UD if guest tries to execute SEAMCALL or TDCALL")
The 'perf kvm-stat' tool uses the exit reasons that are included in the
VMX_EXIT_REASONS define, this new SEAMCALL isn't included there (TDCALL
is), so shouldn't be causing any change in behaviour, this patch ends up
being just addressess the following perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Please see tools/include/uapi/README for further details.
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
not available
This is one more remnant of the BUILD_NONDISTRO series to make building
with binutils-devel opt-in due to license incompatibility.
In this case just the references at link time were still in place, which
make building the test-all.bin file fail, which wasn't detected before
probably because the last test was done with binutils-devel available,
doh.
Now:
$ rpm -q binutils-devel
package binutils-devel is not installed
$ file /tmp/build/perf-tools/feature/test-all.bin
/tmp/build/perf-tools/feature/test-all.bin: ELF 64-bit LSB executable, x86-64, version 1 (SYSV),
dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2,
BuildID[sha1]=4b5388a346b51f1b993f0b0dbd49f4570769b03c, for GNU/Linux 3.2.0, not stripped
$
Fixes: 970ae86307718c34 ("perf build: The bfd features are opt-in, stop testing for them by default")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With commit f0d0f978f3f5830a ("perf header: Don't write empty BPF/BTF
info"), the write_bpf_( prog_info() | btf() ) functions exit without
writing anything if env->bpf_prog.(infos| btfs)_cnt is zero.
process_bpf_( prog_info() | btf() ), however, still expect a "count"
value to exist in the data file. If btf information is empty, for
example, process_bpf_btf will read garbage or some other data as the
number of btf nodes in the data file. As a result, the data file will
not be processed correctly.
Instead, write the count to the data file and exit if it is zero.
Fixes: f0d0f978f3f5830a ("perf header: Don't write empty BPF/BTF info")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Falcon <thomas.falcon@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When the system has many cores and task switching is frequent,
setting set_ftrace_pid can cause frequent pid_list->lock contention
and high system sys usage.
For example, in a 288-core VM environment, we observed 267 CPUs
experiencing contention on pid_list->lock, with stack traces showing:
#4 [ffffa6226fb4bc70] native_queued_spin_lock_slowpath at ffffffff99cd4b7e
#5 [ffffa6226fb4bc90] _raw_spin_lock_irqsave at ffffffff99cd3e36
#6 [ffffa6226fb4bca0] trace_pid_list_is_set at ffffffff99267554
#7 [ffffa6226fb4bcc0] trace_ignore_this_task at ffffffff9925c288
#8 [ffffa6226fb4bcd8] ftrace_filter_pid_sched_switch_probe at ffffffff99246efe
#9 [ffffa6226fb4bcf0] __schedule at ffffffff99ccd161
Replaces the existing spinlock with a seqlock to allow concurrent readers,
while maintaining write exclusivity.
Link: https://patch.msgid.link/20251113000252.1058144-1-leonylgao@gmail.com
Reviewed-by: Huang Cun <cunhuang@tencent.com>
Signed-off-by: Yongliang Gao <leonylgao@tencent.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add definitions for USB3.0 core clocks in the R9A09G056 CPG DT bindings
header file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251101050034.738807-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add definitions for USB3.0 core clocks in the R9A09G057 CPG DT bindings
header file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251101050034.738807-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Currently the function graph tracer's options are saved via a global mask
when it should be per instance. Use the new infrastructure to define a
"default_flags" field in the tracer structure that is used for the top
level instance as well as new ones.
Currently the global mask causes confusion:
# cd /sys/kernel/tracing
# mkdir instances/foo
# echo function_graph > instances/foo/current_tracer
# echo 1 > options/funcgraph-args
# echo function_graph > current_tracer
# cat trace
[..]
2) | _raw_spin_lock_irq(lock=0xffff96b97dea16c0) {
2) 0.422 us | do_raw_spin_lock(lock=0xffff96b97dea16c0);
7) | rcu_sched_clock_irq(user=0) {
2) 1.478 us | }
7) 0.758 us | rcu_is_cpu_rrupt_from_idle();
2) 0.647 us | enqueue_hrtimer(timer=0xffff96b97dea2058, base=0xffff96b97dea1740, mode=0);
# cat instances/foo/options/funcgraph-args
1
# cat instances/foo/trace
[..]
4) | __x64_sys_read() {
4) | ksys_read() {
4) 0.755 us | fdget_pos();
4) | vfs_read() {
4) | rw_verify_area() {
4) | security_file_permission() {
4) | apparmor_file_permission() {
4) | common_file_perm() {
4) | aa_file_perm() {
4) | rcu_read_lock_held() {
[..]
The above shows that updating the "funcgraph-args" option at the top level
instance also updates the "funcgraph-args" option in the instance but
because the update is only done by the instance that gets changed (as it
should), it's confusing to see that the option is already set in the other
instance.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251111232429.641030027@kernel.org
Fixes: c132be2c4fcc1 ("function_graph: Have the instances use their own ftrace_ops for filtering")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Merge fixes for issues related to the handling of compressed hibernation
images that were introduced during the 6.9 development cycle.
* pm-sleep:
PM: hibernate: Fix style issues in save_compressed_image()
PM: hibernate: Use atomic64_t for compressed_size variable
PM: hibernate: Emit an error when image writing fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Fix memory leak of objects from remote NUMA node when bulk freeing to
a cache with sheaves (Harry Yoo)
* tag 'slab-for-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slub: fix memory leak in free_to_pcs_bulk()
|
|
Merge ACPI CPPC library fixes and an ACPI MRRM table parser fix for
6.18-rc6.
* acpi-cppc:
ACPI: CPPC: Limit perf ctrs in PCC check only to online CPUs
ACPI: CPPC: Perform fast check switch only for online CPUs
ACPI: CPPC: Check _CPC validity for only the online CPUs
ACPI: CPPC: Detect preferred core availability on online CPUs
* acpi-tables:
ACPI: MRRM: Fix memory leaks and improve error handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"Fixes event-filter-function.tc tracing test failure caused when a
first run to sample events triggers kmem_cache_free which interferes
with the rest of the test.
Fix this by calling sample_events twice to eliminate the
kmem_cache_free related noise from the sampling"
* tag 'linux_kselftest-fixes-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/tracing: Run sample events to clear page cache events
|
|
IEEE 1394 defines the split, concatenated, and unified transaction.
To support the split transaction, core function uses linked list to
maintain the transactions waiting for acknowledge packet. After clearing
sources of hardware interrupts, the acknowledge packet is no longer
handled, therefore it is required to abort the pending transactions.
This commit executes callback with RCODE_CANCELLED for the pending
transactions at card removal.
Link: https://lore.kernel.org/r/20251111223834.311287-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Component bind uses devm_regmap_add_irq_chip() to add IRQ chip, so it
will be removed only during driver unbind, not component unbind.
A component unbind-bind cycle for the same Linux device lifetime would
result in two chips added. Fix this by manually removing the IRQ chip
during component unbind.
Fixes: 8ad529484937 ("ASoC: codecs: add new pm4125 audio codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251023-asoc-regmap-irq-chip-v1-2-17ad32680913@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Qualcomm PM4125 codec is always a single device on the board, however
nothing stops board designers to have two of them, thus same device
driver could probe twice.
Device driver is not ready for that case, because it allocates
statically 'struct regmap_irq_chip' as non-const and stores during
component bind in 'irq_drv_data' member a pointer to per-probe state
container ('struct pm4125_priv').
Second component bind would overwrite the 'irq_drv_data' from previous
device probe, so interrupts would be executed in wrong context.
The fix makes use of currently unused 'struct pm4125_priv' member
'pm4125_regmap_irq_chip', but renames it to a shorter name.
Fixes: 8ad529484937 ("ASoC: codecs: add new pm4125 audio codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251023-asoc-regmap-irq-chip-v1-1-17ad32680913@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use page_slab() instead of virt_to_folio() which will work
perfectly when struct slab is separated from struct folio.
This was the last user of folio_slab(), so delete it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20251113000932.1589073-17-willy@infradead.org
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
In preparation for splitting struct slab from struct page and struct
folio, remove mentions of struct folio from this function. There is a
mild improvement for large kmalloc objects as we will avoid calling
compound_head() for them. We can discard the comment as using
PageLargeKmalloc() rather than !folio_test_slab() makes it obvious.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: kasan-dev <kasan-dev@googlegroups.com>
Link: https://patch.msgid.link/20251113000932.1589073-16-willy@infradead.org
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
In preparation for splitting struct slab from struct page and struct
folio, convert the pointer to a slab rather than a folio. This means
we can end up passing a NULL slab pointer to mem_cgroup_from_obj_slab()
if the pointer is not to a page allocated to slab, and we handle that
appropriately by returning NULL.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: cgroups@vger.kernel.org
Link: https://patch.msgid.link/20251113000932.1589073-15-willy@infradead.org
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth and Wireless. No known outstanding
regressions.
Current release - regressions:
- eth:
- bonding: fix mii_status when slave is down
- mlx5e: fix missing error assignment in mlx5e_xfrm_add_state()
Previous releases - regressions:
- sched: limit try_bulk_dequeue_skb() batches
- ipv4: route: prevent rt_bind_exception() from rebinding stale fnhe
- af_unix: initialise scc_index in unix_add_edge()
- netpoll: fix incorrect refcount handling causing incorrect cleanup
- bluetooth: don't hold spin lock over sleeping functions
- hsr: Fix supervision frame sending on HSRv0
- sctp: prevent possible shift out-of-bounds
- tipc: fix use-after-free in tipc_mon_reinit_self().
- dsa: tag_brcm: do not mark link local traffic as offloaded
- eth: virtio-net: fix incorrect flags recording in big mode
Previous releases - always broken:
- sched: initialize struct tc_ife to fix kernel-infoleak
- wifi:
- mac80211: reject address change while connecting
- iwlwifi: avoid toggling links due to wrong element use
- bluetooth: cancel mesh send timer when hdev removed
- strparser: fix signed/unsigned mismatch bug
- handshake: fix memory leak in tls_handshake_accept()
Misc:
- selftests: mptcp: fix some flaky tests"
* tag 'net-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
hsr: Follow standard for HSRv0 supervision frames
hsr: Fix supervision frame sending on HSRv0
virtio-net: fix incorrect flags recording in big mode
ipv4: route: Prevent rt_bind_exception() from rebinding stale fnhe
wifi: iwlwifi: mld: always take beacon ies in link grading
wifi: iwlwifi: mvm: fix beacon template/fixed rate
wifi: iwlwifi: fix aux ROC time event iterator usage
net_sched: limit try_bulk_dequeue_skb() batches
selftests: mptcp: join: properly kill background tasks
selftests: mptcp: connect: trunc: read all recv data
selftests: mptcp: join: userspace: longer transfer
selftests: mptcp: join: endpoints: longer transfer
selftests: mptcp: join: rm: set backup flag
selftests: mptcp: connect: fix fallback note due to OoO
ethtool: fix incorrect kernel-doc style comment in ethtool.h
mlx5: Fix default values in create CQ
Bluetooth: btrtl: Avoid loading the config file on security chips
net/mlx5e: Fix potentially misleading debug message
net/mlx5e: Fix wraparound in rate limiting for values above 255 Gbps
net/mlx5e: Fix maxrate wraparound in threshold between units
...
|
|
Add support for Partial-IO poweroff. In Partial-IO pins of a few
hardware units can generate system wakeups while DDR memory is not
powered resulting in a fresh boot of the system. These hardware units in
the SoC are always powered so that some logic can detect pin activity.
If the system supports Partial-IO as described in the fw capabilities, a
sys_off handler is added. This sys_off handler decides if the poweroff
is executed by entering normal poweroff or Partial-IO instead. The
decision is made by checking if wakeup is enabled on all devices that
may wake up the SoC from Partial-IO.
The possible wakeup devices are found by checking which devices
reference a "Partial-IO" system state in the list of wakeup-source
system states. Only devices that are actually enabled by the user will
be considered as an active wakeup source. If none of the wakeup sources
is enabled the system will do a normal poweroff. If at least one wakeup
source is enabled it will instead send a TI_SCI_MSG_PREPARE_SLEEP
message from the sys_off handler. Sending this message will result in an
immediate shutdown of the system. No execution is expected after this
point. The code will wait for 5s and do an emergency_restart afterwards
if Partial-IO wasn't entered at that point.
A short documentation about Partial-IO can be found in section 6.2.4.5
of the TRM at
https://www.ti.com/lit/pdf/spruiv7
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kendall Willis <k-willis@ti.com>
Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Link: https://patch.msgid.link/20251103-topic-am62-partialio-v6-12-b4-v10-2-0557e858d747@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Check the header flags if an response is expected or not. If it is not
expected skip the receive part of ti_sci_do_xfer(). This prepares the
driver for one-way messages as prepare_sleep for Partial-IO.
Reviewed-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Link: https://patch.msgid.link/20251103-topic-am62-partialio-v6-12-b4-v10-1-0557e858d747@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Use correct kernel-doc format to avoid kernel-doc warnings in
nclude/linux/firmware/cirrus/cs_dsp_test_utils.h:
- mark one struct member as private: since the comment says that it is
private
- add ending ':' to struct members where needed
Warning: include/linux/firmware/cirrus/cs_dsp_test_utils.h:30 struct
member 'saw_bus_write' not described in 'cs_dsp_test'
Warning: include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'id' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'ver' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'xm_base_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'xm_size_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'ym_base_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'ym_size_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'zm_base_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'zm_size_words' not described in 'cs_dsp_mock_alg_def'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251104192653.929157-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The default FIFO data width of the Cadence SPI IP is 8 bits, but
the hardware supports configurations of 16 bits and 32 bits.
This patch enhances the driver to support communication with both
16-bits and 32-bits FIFO data widths.
Signed-off-by: Jun Guo <jun.guo@cixtech.com>
Link: https://patch.msgid.link/20251031073003.3289573-3-jun.guo@cixtech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
- Add new compatible strings to the DT binding documents to support
cix sky1 SoC.
Signed-off-by: Jun Guo <jun.guo@cixtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251031073003.3289573-2-jun.guo@cixtech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The commit 989b09b73978 ("slab: skip percpu sheaves for remote object
freeing") introduced the remote_objects array in free_to_pcs_bulk() to
skip sheaves when objects from a remote node are freed.
However, the array is flushed only when:
1) the array becomes full (++remote_nr >= PCS_BATCH_MAX), or
2) slab_free_hook() returns false and size becomes zero.
When neither of the conditions is met, objects in the array are leaked.
This resulted in a memory leak [1], where 82 GiB of memory was allocated
for the maple_node cache.
Flush the array after successfully freeing objects to sheaves
in the do_free: path.
In the meantime, move the snippet if (!size) goto flush_remote; outside
the while loop for readability. Let's say all objects in the array are
from a remote node: then we acquire s->cpu_sheaves->lock and try to free
an object even when size is zero. This doesn't appear to be harmful,
but isn't really readable.
Reported-by: Tytus Rogalewski <admin@simplepod.ai>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220765 [1]
Closes: https://lore.kernel.org/linux-mm/20251107094809.12e9d705b7bf4815783eb184@linux-foundation.org
Closes: https://lore.kernel.org/all/aRGDTwbt2EIz2CYn@hyeyoo
Fixes: 989b09b73978 ("slab: skip percpu sheaves for remote object freeing")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20251111125331.12246-1-harry.yoo@oracle.com
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Tytus Rogalewski <admin@simplepod.ai>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
SM6115 does not have "macro" clock, so its bindings differ with existing
SoC support in rx-macro. So add dedicated compatible in both driver and
dt-bindings to be able to address that difference.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031120703.590201-7-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SM6115 does not have "macro" clock, so its bindings differ with existing
SoC support in va-macro. So add dedicated compatible in both driver and
dt-bindings to be able to address that difference.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031120703.590201-6-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add bindings for Qualcomm SM6115 SoC Low Power Audio SubSystem (LPASS)
VA macro codec. This SoC does not provide macro clock so reflect that in
the bindings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251031120703.590201-5-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
re-arrange clock-names in the bindings to be more specific to the SoC
compatibles, this will give more flexibility to add new SoC's which do
not support some clocks.
Move all the clock-names under the SoC compatible rather than keeping
int on the top level, this makes it more align with other lpass codec
macros.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251031120703.590201-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add bindings for Qualcomm SM6115 SoC Low Power Audio SubSystem (LPASS)
RX macro codec. This SoC does not provide macro clock so reflect that in
the bindings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251031120703.590201-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SM6115 does have soundwire controller in tx. For some reason
we ended up with this incorrect patch.
Fix this by adding the flag to reflect this in SoC data.
Fixes: 510c46884299 ("ASoC: codecs: lpass-tx-macro: Add SM6115 support")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031120703.590201-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix runtime PM usage count underflow caused by calling
pm_runtime_put_autosuspend() twice with only one corresponding
pm_runtime_get_noresume() call. This triggers the warning:
"Runtime PM usage count underflow!"
Remove the duplicate put call to balance the runtime PM reference
counting.
Fixes: 30dbc1c8d50f ("spi: cadence-qspi: defer runtime support on socfpga if reset bit is enabled")
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Link: https://patch.msgid.link/20251105161146.2019090-3-a-dutta@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "probe_setup_failed" label calls pm_runtime_disable(), but
pm_runtime_enable() was placed after a possible jump to this label.
When cqspi_setup_flash() fails, control jumps to the label without
pm_runtime_enable() being called, leading to unbalanced PM runtime
reference counting.
Move pm_runtime_enable() and associated calls above the first
possible branch to "probe_setup_failed" to ensure balanced
enable/disable calls across all error paths.
Fixes: 30dbc1c8d50f ("spi: cadence-qspi: defer runtime support on socfpga if reset bit is enabled")
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Link: https://patch.msgid.link/20251105161146.2019090-2-a-dutta@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For PREEMPT_RT=y kernels, the deferred_irq_workfn() is executed in
the per-cpu irq_work/* task context and not disable-irq, if the rq
returned by container_of() is current CPU's rq, the following scenarios
may occur:
lock(&rq->__lock);
<Interrupt>
lock(&rq->__lock);
This commit use IRQ_WORK_INIT_HARD() to replace init_irq_work() to
initialize rq->scx.deferred_irq_work, make the deferred_irq_workfn()
is always invoked in hard-irq context.
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Assign the result of devm_gpiod_get_optional() directly to
pcie->reset_gpio, thereby removing the local variable.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20251028154229.6774-3-linux.amoon@gmail.com
|
|
Use devm_clk_get_optional_enabled() helper instead of calling
devm_clk_get_optional() and then clk_prepare_enable().
Assign the result of devm_clk_get_optional_enabled() directly to
pcie->refclk to avoid using a local 'clk' variable.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20251028154229.6774-2-linux.amoon@gmail.com
|
|
The 'pci-keystone.c' driver is the application/glue/wrapper driver for the
Designware PCIe Controllers on TI SoCs. Now that all of the helper APIs
that the 'pci-keystone.c' driver depends upon have been exported for use,
enable support to build the driver as a loadable module.
When building the driver as a module, the functions marked by the '__init'
keyword may be invoked after the init memory has been freed by the kernel.
This results will result in an exception of the form:
Unable to handle kernel paging request at virtual address ...
Mem abort info:
...
pc : ks_pcie_host_init+0x0/0x540
lr : dw_pcie_host_init+0x170/0x498
...
ks_pcie_host_init+0x0/0x540 (P)
ks_pcie_probe+0x728/0x84c
platform_probe+0x5c/0x98
really_probe+0xbc/0x29c
__driver_probe_device+0x78/0x12c
driver_probe_device+0xd8/0x15c
To address this, introduce a new function namely 'ks_pcie_init()' to
register the 'fault handler' while removing the '__init' keyword from
existing functions.
Note that hook_fault_code() is defined as '__init' function. Since the init
functions should never be called during runtime (after init memory freeing
stage), the driver is made as a built-in if CONFIG_ARM (where
hook_fault_code() is used) is selected.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[mani: added a note about hook_fault_code()]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251029080547.1253757-5-s-vadapalli@ti.com
|
|
The pci-keystone.c driver uses the functions 'dw_pcie_allocate_domains()'
and 'dw_pcie_ep_raise_msix_irq()'. Export them in preparation for enabling
the pci-keystone.c driver to be built as a loadable module.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251029080547.1253757-3-s-vadapalli@ti.com
|
|
The pci-keystone.c driver uses the 'pci_get_host_bridge_device()' helper.
Export it in preparation for enabling the pci-keystone.c driver to be built
as a loadable module.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251029080547.1253757-2-s-vadapalli@ti.com
|
|
Commit under Fixes introduced support for PCIe EP mode on AM654x platforms.
When the mode happens to be either "DW_PCIE_RC_TYPE" or "DW_PCIE_EP_TYPE",
the PCIe Controller is configured accordingly. However, when the mode is
neither of them, an error message is displayed, but the driver probe
succeeds. Since this "invalid" mode is not associated with a functional
PCIe Controller, the probe should fail.
Fix the behavior by exiting "ks_pcie_probe()" with the return value of
"-EINVAL" in addition to displaying the existing error message when the
mode is invalid.
Fixes: 23284ad677a9 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251029080547.1253757-4-s-vadapalli@ti.com
|
|
Merge zcrx updates from Pavel:
"Zcrx updates for 6.19. It includes a bunch of small patches,
IORING_REGISTER_ZCRX_CTRL and RQ flushing (Patches 4-5) and David's
work on sharing zcrx b/w multiple io_uring instances."
Link: https://lore.kernel.org/io-uring/cover.1763029704.git.asml.silence@gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* zcrx-updates-6.19:
io_uring/zcrx: share an ifq between rings
io_uring/zcrx: add io_fill_zcrx_offsets()
io_uring/zcrx: export zcrx via a file
io_uring/zcrx: move io_zcrx_scrub() and dependencies up
io_uring/zcrx: count zcrx users
io_uring/zcrx: add sync refill queue flushing
io_uring/zcrx: introduce IORING_REGISTER_ZCRX_CTRL
io_uring/zcrx: elide passing msg flags
io_uring/zcrx: use folio_nr_pages() instead of shift operation
io_uring/zcrx: convert to use netmem_desc
|
|
Add a way to share an ifq from a src ring that is real (i.e. bound to a
HW RX queue) with other rings. This is done by passing a new flag
IORING_ZCRX_IFQ_REG_IMPORT in the registration struct
io_uring_zcrx_ifq_reg, alongside the fd of an exported zcrx ifq.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper io_fill_zcrx_offsets() that sets the constant offsets in
struct io_uring_zcrx_offsets returned to userspace.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add an option to wrap a zcrx instance into a file and expose it to the
user space. Currently, users can't do anything meaningful with the file,
but it'll be used in a next patch to import it into another io_uring
instance. It's implemented as a new op called ZCRX_CTRL_EXPORT for the
IORING_REGISTER_ZCRX_CTRL registration opcode.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for adding zcrx ifq exporting and importing, move
io_zcrx_scrub() and its dependencies up the file to be closer to
io_close_queue().
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
zcrx tries to detach ifq / terminate page pools when the io_uring ctx
owning it is being destroyed. There will be multiple io_uring instances
attached to it in the future, so add a separate counter to track the
users. Note, refs can't be reused for this purpose as it only used to
prevent zcrx and rings destruction, and also used by page pools to keep
it alive.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add an zcrx interface via IORING_REGISTER_ZCRX_CTRL that forces the
kernel to flush / consume entries from the refill queue. Just as with
the IORING_REGISTER_ZCRX_REFILL attempt, the motivation is to address
cases where the refill queue becomes full, and the user can't return
buffers and needs to stash them. It's still a slow path, and the user
should size refill queue appropriately, but it should be helpful for
handling temporary traffic spikes and other unpredictable conditions.
The interface is simpler comparing to ZCRX_REFILL as it doesn't need
temporary refill entry arrays and gives natural batching, whereas
ZCRX_REFILL requires even more user logic to be somewhat efficient.
Also, add a structure for the operation. It's not currently used but
can serve for future improvements like limiting the number of buffers to
process, etc.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It'll be annoying and take enough of boilerplate code to implement
new zcrx features as separate io_uring register opcode. Introduce
IORING_REGISTER_ZCRX_CTRL that will multiplex such calls to zcrx.
Note, there are no real users of the opcode in this patch.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
