| Age | Commit message (Collapse) | Author |
|---|
|
default, state_100mhz and state_200mhz use the same settings. But current
driver use these to indicate if sd3.0 support.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the EPD PMIC for the e70k02 based devices as a step towards full EPD
support.
Acked-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Andreas Kemnade <akemnade@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add overlay to support PWM fan on the phyBOARD-Nash-i.MX93 board. Fan
can be connected to the FAN (X48) connector on the board and will be
controlled according to the following CPU temperature trips table:
- bellow 50 degrees - fan is off (<1% duty cycle)
- between 50 and 58 degrees - low fan speed (~35% duty cycle)
- between 58 and 65 degrees - fan medium speed (~60% duty cycle)
- above 65 degrees - fan at full speed (>99% duty cycle)
The output frequency of PWM signal is set to 25 kHz.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Alberto Merciai <alb3rt0.m3rciai@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add overlay to enable JTAG pins on the board's JTAG (X41) connector.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable internal pull up of the active low audio codec reset pin.
Otherwise the audio codec does not reset properly and is not working.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for powertip,ph128800t006-zhc01 connected via peb-av-10
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The PEB-AV-10 board can be used with different displays or in audio-only
mode.
Split the device tree overlays to reflect these use cases. To use the
board with the EDT ETML1010G3DRA display, the overlay
imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtbo must now be used
instead of imx8mm-phyboard-polis-peb-av-10.dtbo.
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
coding style
Sort properties. Rename regulator label to match schematics.
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
sn65dsi83 is mounted on som. Add the static configuration there.
So it can be used by other boards too.
Use mipi_dsi_out from imx8mm.dtsi directly.
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update license and remove individual authorship.
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Acked-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add initial support for the PHYTEC phyBOARD-Segin-i.MX91 board [1] based
on the PHYTEC phyCORE-i.MX91 SoM (System-on-Module) [2].
Supported features:
* Audio
* CAN
* eMMC
* Ethernet
* I2C
* RTC
* SD-Card
* UART
* USB
For more details see the product pages for the development board and the
SoM:
[1] https://www.phytec.eu/en/produkte/development-kits/phyboard-segin-kit/
[2] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add device-tree bindings for PHYTEC phyBOARD-Segin-i.MX91 board based on
the PHYTEC phyCORE-i.MX91 SoM (System-on-Module).
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Tree has invariant part + two subtrees that get replaced upon each
policy load. Invariant parts stay for the lifetime of filesystem,
these two subdirs - from policy load to policy load (serialized
on lock_rename(root, ...)).
All object creations are via d_alloc_name()+d_add() inside selinuxfs,
all removals are via simple_recursive_removal().
Turn those d_add() into d_make_persistent()+dput() and that's mostly it.
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
allocating dentry after the inode has been set up reduces the amount
of boilerplate - "attach this inode under that name and this parent
or drop inode in case of failure" simplifies quite a few places.
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Don't bother to store the dentry of /policy_capabilities - it belongs
to invariant part of tree and we only use it to populate that directory,
so there's no reason to keep it around afterwards.
Same situation as with /avc, /ss, etc. There are two directories that
get replaced on policy load - /class and /booleans. These we need to
stash (and update the pointers on policy reload); /policy_capabilities
is not in the same boat.
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
removals are done with locked_recursive_removal(); switch creations to
simple_start_creating()/d_make_persistent()/simple_done_creating() and
take them to a helper (add_entry()), while we are at it - simpler control
flow that way.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
creation/removal is via normal VFS paths; make ->mkdir() and ->symlink()
use d_make_persistent(); ->rmdir() and ->unlink() - d_make_discardable()
instead of dput() and that's it.
d_make_persistent() works for unhashed just fine...
Note that only persistent dentries are ever hashed there; unusual absense
of ->d_delete() in dentry_operations is due to that - anything that has
refcount reach 0 will be unhashed there, so it won't get to checking
->d_delete anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Objects are created either by d_alloc_name()+d_add() (in
binderfs_ctl_create()) or by simple_start_creating()+d_instantiate().
Removals are by simple_recurisive_removal().
Switch d_add()/d_instantiate() to d_make_persistent() + dput().
Voila - kill_litter_super() is not needed anymore.
Fold dput()+unlocking the parent into simple_done_creating(), while
we are at it.
NOTE: return value of binderfs_create_file() is borrowed; it may get
stored in proc->binderfs_entry. See binder_release()...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
It's called once, during binderfs mount, right after allocating
root dentry. Checking that it hadn't been already called is
only obfuscating things.
Looks like that bogosity had been copied from devpts...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
binderfs_binder_device_create() gets simpler, binderfs_create_dentry() simply
goes away...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Two kinds of objects there - ptmx and everything else (pty). The former is
created on mount and kept until the fs shutdown; the latter get created
and removed by tty layer (the references are borrowed into tty->driver_data).
The reference to ptmx dentry is also kept, but we only ever use it to
find ptmx inode on remount.
* turn d_add() into d_make_persistent() + dput() both in mknod_ptmx() and
in devpts_pty_new().
* turn dput() to d_make_discardable() in devpts_pty_kill().
* switch mknod_ptmx() to simple_{start,done}_creating().
* instead of storing in pts_fs_info a reference to ptmx dentry, store a reference
to its inode, seeing that this is what we use it for.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
it is always equal (and always had been equal) to &simple_dir_operations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
static contents for each "service processor", whatever the fuck it is.
Congruent subdirectories of root, created at mount time, taken out
by kill_litter_super(). All dentries created with d_alloc_name() and are
left pinned. The odd part is that the list of service providers is
assumed to be unchanging - no locking, nothing to handle removals or
extra elements added later on.
... and it's a PCI device. If you ever tell it to remove an instance,
you are fucked - it doesn't bother with removing its directory from filesystem,
it has a strange check that presumably wanted to be a check for removed
devices, but it had never been fleshed out.
Anyway, d_add() -> d_make_persistent()+dput() in ibmasmfs_create_dir() and
ibmasmfs_create_file(), and make the latter return int - no need to even
borrow that dentry, callers completely ignore it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
have spufs_new_file() use d_make_persistent() instead of d_add() and
do an uncondition dput() in the caller; the rest is completely
straightforward.
[a braino in spufs_mkgang() fixed]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Initially filesystem is populated with d_alloc_name() + d_add().
That becomes d_alloc_name() + d_make_persistent() + dput().
Dynamic creation is switched to d_make_persistent();
removal - to simple_unlink() (no point open-coding it in
efivarfs_unlink(), better call it there)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
we'd already verified that DEBUGFS_ALLOW_API was there in
start_creating() - it would've failed otherwise
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
similar to tracefs - simulation of normal codepath for creation,
simple_recursive_removal() for removal.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
A mix of persistent and non-persistent dentries in there. Strictly
speaking, no need for kill_litter_super() anyway - it pins an internal
mount whenever a persistent dentry is created, so at fs shutdown time
there won't be any to deal with.
However, let's make it explicit - replace d_instantiate() with
d_make_persistent() + dput() (the latter in tracefs_end_creating(),
where it folds with inode_unlock() into simple_done_creating())
for dentries we want persistent and have d_make_discardable() done
either by simple_recursive_removal() (used by tracefs_remove())
or explicitly in eventfs_remove_events_dir().
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
object creation by d_alloc_name()+d_add() in pstore_mkfile(), removal -
via normal VFS codepaths (with ->unlink() using simple_unlink()) or
in pstore_put_backend_records() via locked_recursive_removal()
Replace d_add() with d_make_persistent()+dput() - that's what really
happens there. The reference that goes into record->dentry is valid
only until the unlink (and explicitly cleared by pstore_unlink()).
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
objects are created in fuse_ctl_add_dentry() by d_alloc_name()+d_add(),
removed by simple_remove_by_name().
What we return is a borrowed reference - it is valid until the call of
fuse_ctl_remove_conn() and we depend upon the exclusion (on fuse_mutex)
for safety. Return value is used only within the caller
(fuse_ctl_add_conn()).
Replace d_add() with d_make_persistent() + dput(). dput() is paired
with d_alloc_name() and return value is the result of d_make_persistent().
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
All modifications via normal VFS codepaths; just take care of making
persistent in ->create() and ->mkdir() and that's it (removal side
doesn't need any changes, since it uses simple_rmdir() for ->rmdir()
and calls simple_unlink() from ->unlink()).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
object creation goes through the normal VFS paths or approximation
thereof (user_path_create()/done_path_create() in case of bpf_obj_do_pin(),
open-coded simple_{start,done}_creating() in bpf_iter_link_pin_kernel()
at mount time), removals go entirely through the normal VFS paths (and
->unlink() is simple_unlink() there).
Enough to have bpf_dentry_finalize() use d_make_persistent() instead
of dget() and we are done.
Convert bpf_iter_link_pin_kernel() to simple_{start,done}_creating(),
while we are at it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
All modifications via normal VFS codepaths; just take care of making
persistent in in mqueue_create_attr() and discardable in mqueue_unlink()
and it doesn't need kill_litter_super() at all.
mqueue_unlink() side is best handled by having it call simple_unlink()
rather than duplicating its guts...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Very much ramfs-like; dget()+d_instantiate() -> d_make_persistent()
(in two places) is all it takes.
NB: might make sense to turn its ->put_super() into ->kill_sb().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Entirely static tree populated by simple_fill_super(). Can use
kill_anon_super() as-is.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
entirely static tree, populated by simple_fill_super(). Can switch
to kill_anon_super() without any other changes.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
These are guaranteed to be empty by the time they are shut down;
both are single-instance and there is an internal mount maintained
for as long as there is any contents.
Both have that internal mount pinned by every object in root.
In other words, kill_litter_super() boils down to kill_anon_super()
for those.
Reviewed-by: Joel Becker <jlbec@evilplan.org>
Acked-by: Paul Moore <paul@paul-moore> (LSM)
Acked-by: Andreas Hindborg <a.hindborg@kernel.org> (configfs)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and there's no need to remember those pointers anywhere - ->kill_sb()
no longer needs to bother since kill_anon_super() will take care of
them anyway and proc_pid_readdir() only wants the inumbers, which
we had in a couple of static variables all along.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Quite a bit is already done by infrastructure changes (simple_link(),
simple_unlink()) - all that is left is replacing d_instantiate() +
pinning dget() (in ->symlink() and ->mknod()) with d_make_persistent(),
and, in case of shmem, using simple_unlink() and simple_link() in
->unlink() and ->link() resp., instead of open-coding those there.
Since d_make_persistent() accepts (and hashes) unhashed ones, shmem
situation gets simpler - we no longer care whether ->lookup() has hashed
the sucker.
With that done, we don't need kill_litter_super() for these filesystems
anymore - by the umount time all remaining dentries will be marked
persistent and kill_litter_super() will boil down to call of
kill_anon_super().
The same goes for devtmpfs and rootfs - they are handled by
ramfs or by shmem, depending upon config.
NB: strictly speaking, both devtmpfs and rootfs ought to use
ramfs_kill_sb() if they end up using ramfs; that's a separate
story and the only impact of "just use kill_{litter,anon}_super()"
is that we fail to free their sb->s_fs_info... on reboot.
That's orthogonal to the changes in this series - kill_litter_super()
is identical to kill_anon_super() for those at this point.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Note that simple_unlink() et.al. are used by many filesystems; for now
they can not assume that persistency mark will have been set back
when the object got created. Once all conversions are done we'll
have them complain if called for something that had not been marked
persistent.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* d_make_persistent(dentry, inode) - bump refcount, mark persistent and
make hashed positive. Return value is a borrowed reference to dentry;
it can be used until something removes persistency (at the very least,
until the parent gets unlocked, but some filesystems may have stronger
exclusion).
* d_make_discardable() - remove persistency mark and drop reference.
d_make_persistent() is similar to combination of d_instantiate(), dget()
and setting flag. The only difference is that unlike d_instantiate()
it accepts hashed and unhashed negatives alike. It is always called in
strong locking environment (parent held exclusive, or, in some cases,
dentry coming from d_alloc_name()); if we ever start using it with parent
held only shared and dentry coming from d_alloc_parallel(), we'll need
to copy the in-lookup logics from __d_add().
d_make_discardable() is eqiuvalent to combination of removing flag and
dput(); since flag removal requires ->d_lock, there's no point trying
to avoid taking that for refcount decrement as fast_dput() does.
The slow path of dput() has been taken into a helper and reused in
d_make_discardable() instead.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Some filesystems use a kinda-sorta controlled dentry refcount leak to pin
dentries of created objects in dcache (and undo it when removing those).
Reference is grabbed and not released, but it's not actually _stored_
anywhere. That works, but it's hard to follow and verify; among other
things, we have no way to tell _which_ of the increments is intended
to be an unpaired one. Worse, on removal we need to decide whether
the reference had already been dropped, which can be non-trivial if
that removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag (DCACHE_PERSISTENT)
marking those "leaked" dentries. Having it set claims responsibility
for +1 in refcount.
The end result this series is aiming for:
* get these unbalanced dget() and dput() replaced with new primitives that
would, in addition to adjusting refcount, set and clear persistency flag.
* instead of having kill_litter_super() mess with removing the remaining
"leaked" references (e.g. for all tmpfs files that hadn't been removed
prior to umount), have the regular shrink_dcache_for_umount() strip
DCACHE_PERSISTENT of all dentries, dropping the corresponding
reference if it had been set. After that kill_litter_super() becomes
an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many places
in too many filesystems. It has to be split into a series.
Here we
* introduce the new flag
* teach shrink_dcache_for_umount() to handle it (i.e. remove
and drop refcount on anything that survives to umount with that flag
still set)
* teach kill_litter_super() that anything with that flag does
*not* need to be unpinned.
Next commits will add primitives for maintaing that flag and convert the
common helpers to those. After that - a long series of per-filesystem
patches converting to those primitives.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
should be paired with simple_start_creating() - unlocks parent and
drops dentry reference.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
simple_recursive_removal(), but instead of victim dentry it takes
parent + name.
Used to be open-coded in fs/fuse/control.c, but there's no need to expose
the guts of that thing there and there are other potential users, so
let's lift it into libfs...
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If we have LOCKDOWN_TRACEFS, the function bails out - *after*
having locked the parent directory and without bothering to
undo that. Just check it before tracefs_start_creating()...
Fixes: e24709454c45 "tracefs/eventfs: Add missing lockdown checks"
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
fuse_ctl_remove_conn() used to decrement the link count of root
manually; that got subsumed by simple_recursive_removal(), but
in case when subdirectory creation has failed the latter won't
get called.
Just move the modification of parent's link count into
fuse_ctl_add_dentry() to keep the things simple. Allows to
get rid of the nlink argument as well...
Fixes: fcaac5b42768 "fuse_ctl: use simple_recursive_removal()"
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add support for I2S audio on Amarula rmm board. Audio codec
TLV320AIC3X is connected as slave to SAIF0, which provides
bitclock, frame and MCLK.
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable TLV320AIC3X I2C codec and simple-card support used on Amarula
rmm board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable i.MX95 pinctrl driver necessary for booting. Also enable the
missing drivers required for Ethernet and PCIe functionality. These
drivers are used on i.MX95 boards, including the NXP i.MX95 19x19 EVK.
The below configurations were enabled (listed with their DT nodes on
imx95.dtsi):
* CONFIG_PINCTRL_IMX_SCMI for the `scmi_iomuxc` pinctrl.
* CONFIG_CLK_IMX95_BLK_CTL for the HSIO domain clock controller
(`hsio_blk_ctl`) used by the PCIe controller.
* CONFIG_NXP_NETC_BLK_CTRL for the NETC hardware domain controller
(`netc_blk_ctrl`).
* CONFIG_NXP_ENETC4 for the Ethernet controller (`enetc_port*`).
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
