| Age | Commit message (Collapse) | Author |
|---|
|
Add a comment on regeneration to the generated files.
The comment is placed after the YNL-GEN line[1], as to not interfere
with ynl-regen.sh's detection logic.
[1] and after the optional YNL-ARG line.
Link: https://lore.kernel.org/r/aR5m174O7pklKrMR@zx2c4.com/
Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251120174429.390574-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds a new CLI argument for overriding the default
function prefix, as used for naming the doit/dumpit functions
in the generated kernel code.
When not specified the default "$(FAMILY)-nl" is used.
This can also be specified persistently in generated files:
/* YNL-ARG --function-prefix wg */
In the above example it causes the following changes:
wireguard_nl_get_device_dumpit() -> wg_get_device_dumpit()
wireguard_nl_get_device_doit() -> wg_get_device_doit()
The variable name fn_prefix, was chosen as it relates to op_prefix
which is used to prefix the UAPI commands enum entries.
Link: https://lore.kernel.org/r/aRvWzC8qz3iXDAb3@zx2c4.com/
Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20251120174429.390574-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Andy Shevchenko says:
====================
ptp: ocp: A fix and refactoring
Here is the fix for incorrect use of %ptT with the associated
refactoring and additional cleanups.
Note, %ptS, which is introduced in another series that is already
applied to PRINTK tree, doesn't fit here, that's why this fix
is separated from that series.
====================
Link: https://patch.msgid.link/20251124084816.205035-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The META's PCI vendor ID is listed already in the pci_ids.h.
Reuse it here.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251124084816.205035-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The while (i--) is a standard pattern for the cleaning up loops.
Apply this pattern where it makes sense in the driver.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251124084816.205035-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's a common practice to make resource release functions be NULL-aware.
Make ptp_ocp_unregister_ext() NULL-aware.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251124084816.205035-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor signal_show() to avoid sequential calls to sysfs_emit*()
and use the same pattern to get the index of a signal as it's done
in signal_store().
While at it, fix wrong use of %ptT against struct timespec64.
It's kinda lucky that it worked just because the first member
there 64-bit and it's of time64_t type. Now with %ptS it may
be used correctly.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251124084816.205035-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller reported a lockdep lock order inversion warning[1] due to
commit 687aa0c5581b ("vsock: Fix transport_* TOCTOU"). This was fixed in
commit f7c877e75352 ("vsock: fix lock inversion in
vsock_assign_transport()").
Redo syzkaller's repro by piggybacking on a somewhat related test
implemented in commit 3a764d93385c ("vsock/test: Add test for null ptr
deref when transport changes").
[1]: https://lore.kernel.org/netdev/68f6cdb0.a70a0220.205af.0039.GAE@google.com/
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251123-vsock_test-linger-lockdep-warn-v1-1-4b1edf9d8cdc@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let phydev->enable_tx_lpi control whether MAC enables TX LPI, instead of
enabling it unconditionally. This way TX LPI is disabled if e.g. link
partner doesn't support EEE. This helps to avoid potential issues like
link flaps.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/91bcb837-3fab-4b4e-b495-038df0932e44@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There have been reports that RTL8127 hangs on suspend and shutdown,
partially disappearing from lspci until power-cycling.
According to Realtek disabling PLL's when switching to D3 should be
avoided on that chip version. Fix this by aligning disabling PLL's
with the vendor drivers, what in addition results in PLL's not being
disabled when switching to D3hot on other chip versions.
Fixes: f24f7b2f3af9 ("r8169: add support for RTL8127A")
Tested-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/d7faae7e-66bc-404a-a432-3a496600575f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add PHY driver support for Maxlinear MxL86252 and MxL86282 switches.
The PHYs built-into those switches are just like any other GPY 2.5G PHYs
with the exception of the temperature sensor data being encoded in a
different way.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/a6cd7fe461b011cec2b59dffaf34e9c8b0819059.1763818120.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MxL86211C is a smaller and more efficient version of the GPY211C.
Add the PHY ID and phy_driver instance to the mxl-gpy driver.
Signed-off-by: Chad Monroe <chad@monroe.io>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/cabf3559d6511bed6b8a925f540e3162efc20f6b.1763818120.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, when skb is null, the driver prints an error and then
dereferences skb on the next line.
To fix this, let's add a 'break' after the error message to switch
to sxgbe_rx_refill(), which is similar to the approach taken by the
other drivers in this particular case, e.g. calxeda with xgmac_rx().
Found during a code review.
Fixes: 1edb9ca69e8a ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251121123834.97748-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove redundant fwnode cleanup in of_mdiobus_register_device()
and xpcs_plat_init_dev().
mdio_device_free() eventually calls mdio_device_release(),
which already performs fwnode_handle_put(), making the manual
cleanup unnecessary.
Combine fwnode_handle_get() with device_set_node() in
of_mdiobus_register_device() for clarity.
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/00847693daa8f7c8ff5dfa19dd35fc712fa4e2b5.1763995734.git.buday.csaba@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix all warnings reported by scripts/kernel-doc in
mdio_device.c and mdio_bus.c
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/7ef7b80669da2b899d38afdb6c45e122229c3d8c.1763968667.git.buday.csaba@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wei Fang says:
====================
net: enetc: add port MDIO support for both i.MX94 and i.MX95
The NETC IP has one external master MDIO interface (eMDIO) for managing
external PHYs, all ENETC ports share this eMDIO. The EMDIO function and
the ENETC port MDIO are the virtual ports of this eMDIO, ENETC can use
these virtual ports to access their PHYs. The difference is that EMDIO
function is a 'global port', it can access all the PHYs on the eMDIO, so
it provides a means for different software modules to share a single set
of MDIO signals to access their PHYs.
The ENETC port MDIO can only access its own external PHY. Furthermore,
its PHY address must be set to its corresponding LaBCR register in IERB
module, which is is a 64 KB size page containing registers that are used
for pre-boot initialization for all NETC PCIe functions. And this IERB
is owned by the host OS and it will be locked after the initialization,
so it cannot be configured at running time any more. The port MDIO can
only work properly when the PHY address accessed by it matches the value
of its corresponding LaBCR[MDIO_PHYAD_PRTAD]. Otherwise, the MDIO access
by the port MDIO will not take effect.
Note that the same PHY is either controlled by port MDIO or by the EMDIO
function. The netc-blk-ctrl driver will only set the PHY address in the
LaBCR register corresponding to the ENETC when the ENETC node contains
an mdio child node, and the ENETC driver will only create the port MDIO
bus then. An example in DTS is as follows, the EMDIO function will not\
access this PHY.
enetc_port0 {
phy-handle = <ðphy0>;
phy-mode = "rgmii-id";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@1 {
reg = <1>;
};
};
};
If users want to use EMDIO funtion to manage the PHY, they only need to
place the PHY node in the emdio node. The same PHY must not be placed
simultaneously within the ENETC node. An example in DTS to use EMDIO
is as below.
netc_emdio {
ethphy0: ethernet-phy@1 {
reg = <1>;
};
ethphy2: ethernet-phy@8 {
reg = <8>;
};
};
In the host OS, when there are multiple ENETCs, they can all access their
PHYs using their own port MDIO, or they can all access their PHYs using
the EMDIO function, or they can partially use port MDIO and partially use
the EMDIO function.
Another typical use case of port MDIO is the Jailhouse usage. An ENETC is
assigned to a guest OS. The EMDIO function will be unavailable in the
guest OS because EMDIO is controlled by the host OS. Therefore, the ENETC
can use its port MDIO to manage its external PHY in this situation. In
this use case, the host OS's root dtb will disable the ENETC node, so the
host OS's ENETC driver will not probe the ENETC and its PHY.
In addition, this series also adds the internal MDIO bus support, each
ENETC has an internal MDIO interface for managing on-die PHY (PCS) if it
has PCS layer.
====================
Link: https://patch.msgid.link/20251119102557.1041881-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each ENETC has a set of external MDIO registers to access its external
PHY based on its port EMDIO bus, these registers are used for MDIO bus
access, such as setting the PHY address, PHY register address and value,
read or write operations, C22 or C45 format, etc. The base address of
this set of registers has been modified in ENETC v4 and is different
from that in ENETC v1. So the base address needs to be updated so that
ENETC v4 can use port MDIO to manage its own external PHY.
Additionally, if ENETC has the PCS layer, it also has a set of internal
MDIO registers for managing its on-die PHY (PCS/Serdes). The base address
of this set of registers is also different from that of ENETC v1, so the
base address also needs to be updated so that ENETC v4 can support the
management of on-die PHY through the internal MDIO bus.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251119102557.1041881-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NETC IP has only one external master MDIO interface (eMDIO) for managing
the external PHYs. ENETC can use the interfaces provided by the EMDIO
function or its port MDIO to access and manage its external PHY. Both
the EMDIO function and the port MDIO are all virtual ports of the eMDIO.
The difference is that the EMDIO function is a 'global port', it can
access all the PHYs on the eMDIO, but port MDIO can only access its own
PHY. To ensure that ENETC can only access its own PHY through port MDIO,
LaBCR[MDIO_PHYAD_PRTAD] needs to be set, which represents the address of
the external PHY connected to ENETC. If the accessed PHY address is not
consistent with LaBCR[MDIO_PHYAD_PRTAD], then the MDIO access initiated
by port MDIO will be invalid.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251119102557.1041881-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ENETC supports managing its own external PHY through its port MDIO
functionality. To use this function, the PHY address needs be set in the
corresponding LaBCR register in the Integrated Endpoint Register Block
(IERB), which is used for pre-boot initialization of NETC PCIe functions.
The port MDIO can only work properly when the PHY address accessed by the
port MDIO matches the corresponding LaBCR[MDIO_PHYAD_PRTAD] value.
Because the ENETC driver only registers the MDIO bus (port MDIO bus) when
it detects an MDIO child node in its node, similarly, the netc-blk-ctrl
driver only resolves the PHY address and sets it in the corresponding
LaBCR when it detects an MDIO child node in the ENETC node.
Co-developed-by: Aziz Sellami <aziz.sellami@nxp.com>
Signed-off-by: Aziz Sellami <aziz.sellami@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251119102557.1041881-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
Improvements over DSA conduit ethtool ops
DSA interceps 'ethtool -S eth0', where eth0 is the host port of the
switch (called 'conduit'). It does this because otherwise there is no
way to report port counters for the CPU port, which is a MAC like any
other of that switch, except Linux exposes no net_device for it, thus no
ethtool hook.
Having understood all downsides of this debugging interface, when we
need it we needed, so the proposed changes here are to make it more
useful by dumping more counters in it: not just the switch CPU port,
but all other switch ports in the tree which lack a net_device. Not
reinventing any wheel, just putting more output in an existing command.
That is patch 3/3. The other 2 are cleanup.
====================
Link: https://patch.msgid.link/20251122112311.138784-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently there is no way to see packet counters on cascade ports, and
no clarity on how the API for that would look like.
Because it's something that is currently needed, just extend the hack
where ethtool -S on the conduit interface dumps CPU port counters, and
also use it to dump counters of cascade ports.
Note that the "pXX_" naming convention changes to "sXX_pYY", to
distinguish between ports having the same index but belonging to
different switches. This has a slight chance of causing regressions to
existing tooling:
- grepping for "p04_counter_name" still works, but might return more
than one string now
- grepping for " p04_counter_name" no longer works
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251122112311.138784-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Suppress some checkpatch 'CHECK' messages about u8 being preferable over
uint8_t, etc. No functional change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251122112311.138784-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In theory this would have been seen by now, but it seems that all
drivers used as DSA conduit interfaces thus far have had ethtool_ops
set, and it's hard to even find modern Ethernet drivers (and not VF
ones) which don't use ethtool.
Here is the unfiltered list of drivers which register any sort of
net_device but don't set its ethtool_ops pointer. I don't think any of
them 'risks' being used as a DSA conduit, maybe except for moxart,
rnpbge and icssm, I'm not sure.
- drivers/net/can/dev/dev.c
- drivers/net/wwan/qcom_bam_dmux.c
- drivers/net/wwan/t7xx/t7xx_netdev.c
- drivers/net/arcnet/arcnet.c
- drivers/net/hamradio/
- drivers/net/slip/slip.c
- drivers/net/ethernet/ezchip/nps_enet.c
- drivers/net/ethernet/moxa/moxart_ether.c
- drivers/net/ethernet/wangxun/txgbevf/txgbevf_main.c
- drivers/net/ethernet/wangxun/ngbevf/ngbevf_main.c
- drivers/net/ethernet/huawei/hinic3/hinic3_main.c
- drivers/net/ethernet/i825xx/
- drivers/net/ethernet/ti/icssm/icssm_prueth.c
- drivers/net/ethernet/seeq/
- drivers/net/ethernet/litex/litex_liteeth.c
- drivers/net/ethernet/sunplus/spl2sw_driver.c
- drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c
- drivers/net/ipa/
- drivers/net/wireless/microchip/wilc1000/
- drivers/net/wireless/mediatek/mt76/dma.c
- drivers/net/wireless/ath/ath12k/
- drivers/net/wireless/ath/ath11k/
- drivers/net/wireless/ath/ath6kl/
- drivers/net/wireless/ath/ath10k/
- drivers/net/wireless/intel/iwlwifi/pcie/gen1_2/trans.c
- drivers/net/wireless/virtual/mac80211_hwsim.c
- drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c
- drivers/net/wireless/realtek/rtw89/core.c
- drivers/net/wireless/realtek/rtw88/pci.c
- drivers/net/caif/
- drivers/net/plip/
- drivers/net/wan/
- drivers/net/mctp/
- drivers/net/ppp/
- drivers/net/thunderbolt/
Nonetheless, it's good for the framework not to make such assumptions,
and not panic when coming across such kind of host device in the future.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251122112311.138784-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Attempting to add a port device that is already up will expectedly fail,
but not before modifying the team device header_ops.
In the case of the syzbot reproducer the gre0 device is
already in state UP when it attempts to add it as a
port device of team0, this fails but before that
header_ops->create of team0 is changed from eth_header to ipgre_header
in the call to team_dev_type_check_change.
Later when we end up in ipgre_header() struct ip_tunnel* points to nonsense
as the private data of the device still holds a struct team.
Example sequence of iproute2 commands to reproduce the hang/BUG():
ip link add dev team0 type team
ip link add dev gre0 type gre
ip link set dev gre0 up
ip link set dev gre0 master team0
ip link set dev team0 up
ping -I team0 1.1.1.1
Move team_dev_type_check_change down where all other checks have passed
as it changes the dev type with no way to restore it in case
one of the checks that follow it fail.
Also make sure to preserve the origial mtu assignment:
- If port_dev is not the same type as dev, dev takes mtu from port_dev
- If port_dev is the same type as dev, port_dev takes mtu from dev
This is done by adding a conditional before the call to dev_set_mtu
to prevent it from assigning port_dev->mtu = dev->mtu and instead
letting team_dev_type_check_change assign dev->mtu = port_dev->mtu.
The conditional is needed because the patch moves the call to
team_dev_type_check_change past dev_set_mtu.
Testing:
- team device driver in-tree selftests
- Add/remove various devices as slaves of team device
- syzbot
Reported-by: syzbot+a2a3b519de727b0f7903@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a2a3b519de727b0f7903
Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20251122002027.695151-1-zlatistiv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/ethernet/chelsio/cxgb4/sched.h declares a sched_class
struct which has a type name clash with struct sched_class
in kernel/sched/sched.h (a type used in a field in task_struct).
When cxgb4 is a builtin we end up with both sched_class types,
and as a result of this we wind up with DWARF (and derived from
that BTF) with a duplicate incorrect task_struct representation.
When cxgb4 is built-in this type clash can cause kernel builds to
fail as resolve_btfids will fail when confused which task_struct
to use. See [1] for more details.
As such, renaming sched_class to ch_sched_class (in line with
other structs like ch_sched_flowc) makes sense.
[1] https://lore.kernel.org/bpf/2412725b-916c-47bd-91c3-c2d57e3e6c7b@acm.org/
Reported-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20251121181231.64337-1-alan.maguire@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds support for chip RTL9151A. Its XID is 0x68b. It is bascially
basd on the one with XID 0x688, but with different firmware file.
Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20251121090104.3753-1-javen_xu@realsil.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rate limiting validation condition currently checks the output
variable max_bw_value[i] instead of the input value
maxrate->tc_maxrate[i]. This causes the validation to compare an
uninitialized or stale value rather than the actual requested rate.
The condition should check the input rate to properly validate against
the upper limit:
} else if (maxrate->tc_maxrate[i] <= upper_limit_gbps) {
This aligns with the pattern used in the first branch, which correctly
checks maxrate->tc_maxrate[i] against upper_limit_mbps.
The current implementation can lead to unreliable validation behavior:
- For rates between 25.5 Gbps and 255 Gbps, if max_bw_value[i] is 0
from initialization, the GBPS path may be taken regardless of whether
the actual rate is within bounds
- When processing multiple TCs (i > 0), max_bw_value[i] contains the
value computed for the previous TC, affecting the validation logic
- The overflow check for rates exceeding 255 Gbps may not trigger
consistently depending on previous array values
This patch ensures the validation correctly examines the requested rate
value for proper bounds checking.
Fixes: 43b27d1bd88a ("net/mlx5e: Fix wraparound in rate limiting for values above 255 Gbps")
Signed-off-by: Danielle Costantino <dcostantino@meta.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251124180043.2314428-1-dcostantino@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When having a multiuser mount with domain= specified and using
cifscreds, cifs_set_cifscreds() will end up setting @ctx->domainname,
so it needs to be freed before leaving cifs_construct_tcon().
This fixes the following memory leak reported by kmemleak:
mount.cifs //srv/share /mnt -o domain=ZELDA,multiuser,...
su - testuser
cifscreds add -d ZELDA -u testuser
...
ls /mnt/1
...
umount /mnt
echo scan > /sys/kernel/debug/kmemleak
cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff8881203c3f08 (size 8):
comm "ls", pid 5060, jiffies 4307222943
hex dump (first 8 bytes):
5a 45 4c 44 41 00 cc cc ZELDA...
backtrace (crc d109a8cf):
__kmalloc_node_track_caller_noprof+0x572/0x710
kstrdup+0x3a/0x70
cifs_sb_tlink+0x1209/0x1770 [cifs]
cifs_get_fattr+0xe1/0xf50 [cifs]
cifs_get_inode_info+0xb5/0x240 [cifs]
cifs_revalidate_dentry_attr+0x2d1/0x470 [cifs]
cifs_getattr+0x28e/0x450 [cifs]
vfs_getattr_nosec+0x126/0x180
vfs_statx+0xf6/0x220
do_statx+0xab/0x110
__x64_sys_statx+0xd5/0x130
do_syscall_64+0xbb/0x380
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: f2aee329a68f ("cifs: set domainName when a domain-key is used in multiuser")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: Jay Shin <jaeshin@redhat.com>
Cc: stable@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Kumar Kartikeya Dwivedi says:
====================
General enhancements to rqspinlock stress test
Three enchancements, details in commit messages.
First, the CPU requirements are 2 for AA, 3 for ABBA, and 4 for ABBCCA,
hence relax the check during module initialization. Second, add a
per-CPU histogram to capture lock acquisition times to record which
buckets these acquisitions fall into for the normal task context and NMI
context. Anything below 10ms is not printed in detail, but above that
displays the full breakdown for each context. Finally, make the delay of
the NMI and task contexts configurable, set to 10 and 20 ms respectively
by default.
====================
Link: https://patch.msgid.link/20251125020749.2421610-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Allow users to configure the critical section delay for both task/normal
and NMI contexts, and set to 20ms and 10ms as before by default.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251125020749.2421610-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add statistics per-CPU broken down by context and various timing windows
for the time taken to acquire an rqspinlock. Cases where all
acquisitions fit into the 10ms window are skipped from printing,
otherwise the full breakdown is displayed when printing the summary.
This allows capturing precisely the number of times outlier attempts
happened for a given lock in a given context.
A critical detail is that time is captured regardless of success or
failure, which is important to capture events for failed but long
waiting timeout attempts.
Output:
[ 64.279459] rqspinlock acquisition latency histogram (ms):
[ 64.279472] cpu1: total 528426 (normal 526559, nmi 1867)
[ 64.279477] 0-1ms: total 524697 (normal 524697, nmi 0)
[ 64.279480] 2-2ms: total 3652 (normal 1811, nmi 1841)
[ 64.279482] 3-3ms: total 66 (normal 47, nmi 19)
[ 64.279485] 4-4ms: total 2 (normal 1, nmi 1)
[ 64.279487] 5-5ms: total 1 (normal 1, nmi 0)
[ 64.279489] 6-6ms: total 1 (normal 0, nmi 1)
[ 64.279490] 101-150ms: total 1 (normal 0, nmi 1)
[ 64.279492] >= 251ms: total 6 (normal 2, nmi 4)
...
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251125020749.2421610-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Only require 2 CPUs for AA, 3 for ABBA, 4 for ABBCCA, which is
calculated nicely by adding to the mode enum. Enables running single CPU
AA tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251125020749.2421610-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
It is to unify map flags checking for lookup_elem, update_elem,
lookup_batch and update_batch APIs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20251125145857.98134-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, HFS declares on-disk layout's metadata structures
in fs/hfs/hfs.h and HFS+ declares it in fs/hfsplus/hfsplus_raw.h.
However, HFS and HFS+ on-disk layouts have some similarity and
overlapping in declarations. As a result, fs/hfs/hfs.h and
fs/hfsplus/hfsplus_raw.h contain multiple duplicated declarations.
Moreover, both HFS and HFS+ drivers contain completely similar
implemented functionality in multiple places.
This patch is moving the on-disk layout declarations from
fs/hfs/hfs.h and fs/hfsplus/hfsplus_raw.h into
include/linux/hfs_common.h with the goal to exclude
the duplication in declarations. Also, this patch prepares
the basis for creating a hfslib that can aggregate common
functionality without necessity to duplicate the same code
in HFS and HFS+ drivers.
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
Fix up some of missing or incorrect @param descriptions for libbpf public APIs
in libbpf.h.
Signed-off-by: Jianyun Gao <jianyungao89@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251118033025.11804-1-jianyungao89@gmail.com
|
|
The bench test "trig-kernel-count" can be used as a baseline comparison
for fentry and other benchmarks, and the calling to bpf_get_numa_node_id()
should be considered as composition of the baseline. So, let's call it in
trigger_count(). Meanwhile, rename trigger_count() to
trigger_kernel_count() to make it easier understand.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251116014242.151110-1-dongml2@chinatelecom.cn
|
|
Specify value size limit for BPF_MAP_TYPE_PERCPU_ARRAY which
is PCPU_MIN_UNIT_SIZE (32 kb). In percpu allocator (mm: percpu),
any request with a size greater than PCPU_MIN_UNIT_SIZE is rejected.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251115063531.2302903-1-alex.t.tran@gmail.com
|
|
Orange Pi RV is a SBC based on the StarFive VisionFive 2 board.
Orange Pi RV features:
- StarFive JH7110 SoC
- GbE port connected to JH7110 GMAC0 via YT8531 PHY
- 4x USB ports via VL805 PCIe USB controller connected to JH7110 pcie0
- M.2 M-key slot connected to JH7110 pcie1
- HDMI video output
- 3.5mm audio output
- Ampak AP6256 SDIO Wi-Fi/Bluetooth module on mmc0
- microSD slot on mmc1
- SPI NOR flash memory
- 24c02 EEPROM (read only by default)
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: E Shattow <e@freeshell.de>
[conor: amend comment to say what's missing]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add "xunlong,orangepi-rv" as a StarFive JH7110 SoC-based board.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: E Shattow <e@freeshell.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
VisionFive 2 Lite eMMC board uses a non-removable onboard 64GiB eMMC
instead of the MicroSD slot.
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S SoC.
Board features:
- JH7110S SoC
- 4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 1x USB 3.0 host port
- 3x USB 2.0 host port
- 1x M.2 M-Key (size: 2242)
- 1x MicroSD slot (optional non-removable 64GiB eMMC)
- 1x QSPI Flash
- 1x I2C EEPROM
- 1x 1Gbps Ethernet port
- SDIO-based Wi-Fi & UART-based Bluetooth
- 1x HDMI port
- 1x 2-lane DSI
- 1x 2-lane CSI
VisionFive 2 Lite schematics: https://doc-en.rvspace.org/VisionFive2Lite/PDF/VF2_LITE_V1.10_TF_20250818_SCH.pdf
VisionFive 2 Lite Quick Start Guide: https://doc-en.rvspace.org/VisionFive2Lite/VisionFive2LiteQSG/index.html
More documents: https://doc-en.rvspace.org/Doc_Center/visionfive_2_lite.html
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add a common board dtsi for use by VisionFive 2 Lite and
VisionFive 2 Lite eMMC.
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Some node in this file are not used by the upcoming VisionFive 2 Lite
board. Move them to the board dts to prepare for adding the new
VisionFive 2 Lite device tree.
Tested-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add device tree bindings for the StarFive JH7110S SoC
and the VisionFive 2 Lite board equipped with it.
JH7110S SoC is an industrial SoC which can run at -40~85 degrees centigrade
and up to 1.25GHz. Its CPU cores and peripherals are the same as
those of the JH7110 SoC.
VisionFive 2 Lite boards have MicroSD card version (default) and eMMC
version, which are called "VisionFive 2 Lite" and "VisionFive 2 Lite eMMC"
respectively.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The SiFive and Canaan platforms are not being actively looked after at
this point, but fixes for them would be applied if/when the patches
appeared. Since they're now the only things in the RISC-V MISC SOC
SUPPORT, mark them as Odd Fixes. I don't believe this is a functional
change, it just represents what's actually happening - particularly
since the Canaan k230 never built up enough steam to get merged and the
new SiFive demo chips have been done in partnership with with other
companies, e.g. Eswin, and will reside in their directories instead.
Reviewed-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
In fairness to my own employer, lumping it in as "misc" is not quite
accurate when they do pay me to look after the platform. Move the tree
link for it to its entry, rather than having the RISC-V MISC SOC SUPPORT
entry cover it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
I don't use the main riscv patchwork for anything to do with SoCs,
remove them from here to avoid confusion.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
I apply the patches for StarFive devicetrees, add me to the entry along
with my tree location etc. This is not a functional change, as this info
was in the "RISC-V MISC" entry but I'd rather not have the duplication
of entries covering the StarFive directory.
Acked-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Use dev_err_probe() to simplify the code. This also silences -517 errors.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20251125101334.1596381-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Although commit 0c9992315e73 ("ACPICA: Avoid walking the ACPI Namespace
if it is not there") fixed the situation when both start_node and
acpi_gbl_root_node are NULL, the Linux kernel mainline now still crashed
on Honor Magicbook 14 Pro [1].
That happens due to the access to the member of parent_node in
acpi_ns_get_next_node(). The NULL pointer dereference will always
happen, no matter whether or not the start_node is equal to
ACPI_ROOT_OBJECT, so move the check of start_node being NULL
out of the if block.
Unfortunately, all the attempts to contact Honor have failed, they
refused to provide any technical support for Linux.
The bad DSDT table's dump could be found on GitHub [2].
DMI: HONOR FMB-P/FMB-P-PCB, BIOS 1.13 05/08/2025
Link: https://github.com/acpica/acpica/commit/1c1b57b9eba4554cb132ee658dd942c0210ed20d
Link: https://gist.github.com/Cryolitia/a860ffc97437dcd2cd988371d5b73ed7 [1]
Link: https://github.com/denis-bb/honor-fmb-p-dsdt [2]
Signed-off-by: Cryolitia PukNgae <cryolitia.pukngae@linux.dev>
Reviewed-by: WangYuli <wangyl5933@chinaunicom.cn>
[ rjw: Subject adjustment, changelog edits ]
Link: https://patch.msgid.link/20251125-acpica-v1-1-99e63b1b25f8@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
