| Age | Commit message (Collapse) | Author |
|---|
|
This will be used to replace an incorrect direct call into
generic_update_time in btrfs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251120064859.2911749-4-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
FMODE_NOCMTIME used to be just a hack for the legacy XFS handle-based
"invisible I/O", but commit e5e9b24ab8fa ("nfsd: freeze c/mtime updates
with outstanding WRITE_ATTRS delegation") started using it from
generic callers.
I'm not sure other file systems are actually read for this in general,
so the above commit should get a closer look, but for it to make any
sense, file_update_time needs to respect the flag.
Lift the check from file_modified_flags to file_update_time so that
users of file_update_time inherit the behavior and so that all the
checks are done in one place.
Fixes: e5e9b24ab8fa ("nfsd: freeze c/mtime updates with outstanding WRITE_ATTRS delegation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251120064859.2911749-3-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently the two high-level APIs use two helper functions to implement
almost all of the logic. Refactor the two helpers and the common logic
into a new file_update_time_flags routine that gets the iocb flags or
0 in case of file_update_time passed so that the entire logic is
contained in a single function and can be easily understood and modified.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251120064859.2911749-2-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
wait_for_completion_timeout() returns the remaining jiffies
(at least 1) on success or 0 on timeout, but never negative
error codes. The current code incorrectly checks for negative
values, causing timeouts to be ignored and treated as success.
Check for a zero return value to correctly identify and
handle timeout events.
Fixes: 0cf7befa3ea2 ("greybus: gb-beagleplay: Add firmware upload API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251121064027.571-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251112152710.207577-1-marco.crivellari@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
typedefs are unnecessary here. They rather obfuscate the code than help.
So drop them and use the types directly.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
PRINTK_ERROR() + KERN_ERR_MWAVE are just wrappers around printk() with
a prefix. Instead, pr_fmt() can be used. Drop the former and use the
latter.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The printk tracing makes the code hard to follow for no good benefit.
Everyone can use dynamic tracing and/or kprobes.
Drop this unreadable bloatware too.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
file_operations::{read/write/open/release} need not be defined. The core
code return proper values already (the same as the being removed ones).
So there is no need to preserve these just for tracing via printk.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In mwave, a lot of code depends on the MWAVE_FUTZ_WITH_OTHER_DEVICES
macro. That can be defined in Makefile to compile this in.
1) The code is completely unreadable.
2) Recompiling the kernel to have this untested code compiled in is not
a good idea.
Drop all this.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In mwave, there is a lot of commented code for a long time. Drop it.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the RSPI controller on the Renesas RZ/V2N SoC. The block is
compatible with the RSPI implementation found on the RZ/V2H(P) family.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251126131619.136605-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The use of firmware_loader is an implementation detail of drivers rather
than a dependency. FW_LOADER is typically selected rather than depended
on; the Rust abstractions should do the same thing.
Fixes: de6582833db0 ("rust: add firmware abstractions")
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20251106-b4-select-rust-fw-v3-1-771172257755@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused code.
Signed-off-by: Adam Quandour <adam.quandour@gmail.com>
Link: https://patch.msgid.link/20251124192048.290425-1-adam.quandour@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
memset_io() writes memory byte by byte with __raw_writeb() on the arm
platform if the size is word. but XCVR data RAM memory can't be accessed
with byte address, so with memset_io() the channel status control memory
is not really cleared, use writel_relaxed() instead.
Fixes: 28564486866f ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251126064509.1900974-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The custom FIELD_OFFSET macro is no longer used in the driver (replaced
by standard offsetof). Remove the definition.
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20251125112059.16913-6-knavaneeth786@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace usage of the custom FIELD_OFFSET macro with the standard
offsetof() macro in rtw_mlme_ext.c. This improves code readability
and uses the kernel's standard mechanism.
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20251125112059.16913-5-knavaneeth786@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove obsolete commented-out code that references unsupported chip
variants (ODM_RTL8723A, ODM_RTL8188E). This code has been dead since
the driver was added to staging.
Also fix the resulting formatting by removing the unnecessary outer
parentheses and moving the inline comment to its own line.
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20251125112059.16913-4-knavaneeth786@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace usage of the custom FIELD_OFFSET macro with the standard
offsetof() macro in ioctl_cfg80211.c. This improves code readability
and uses the kernel's standard mechanism.
Also include <linux/stddef.h> in basic_types.h to ensure offsetof()
is available for this and future conversions.
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20251125112059.16913-3-knavaneeth786@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The RGTRY_OFT, RGTRY_SZ, BSSID_OFT, and BSSID_SZ macros are defined but
never used anywhere in the driver. Remove these dead macro definitions
to clean up the code.
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20251125112059.16913-2-knavaneeth786@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The COMEDI standalone 8255 driver can be used to configure a COMEDI
device consisting of one of more subdevices, each using an 8255 digital
I/O chip mapped to a range of port I/O addresses. The base port I/O
address of each chip is specified in an array of integer option values
by the `COMEDI_DEVCONFIG` ioctl.
When support for multiple 8255 subdevices per device was added in the
out-of-tree comedi 0.7.27 back in 1999, if any port I/O region could not
be requested, then the corresponding subdevice was set to be an "unused"
subdevice, and the COMEDI device would still be set-up OK as long as
those were the only types of errors. That has persisted until the
present day, but seems a bit odd in retrospect. All the other COMEDI
drivers that use port I/O or memory regions will fail to set up the
device if any region cannot be requested. It seems unlikely that the
sys admin would deliberately choose a port that cannot be requested just
to leave a gap in the device's usable subdevice numbers, and failing to
set-up the device will provide a more noticeable indication that
something hasn't been set-up correctly, so change the driver to fail to
set up the device if any of the port I/O regions cannot be requested.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251028112833.15033-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "comedi_bond" driver allows a composite COMEDI device to be built up
from the subdevices of other COMEDI devices, although it currently only
supports digital I/O subdevices. Although it checks that it is not
trying to bind to itself, it is possible to end up with a cycle of
"comedi_bond" devices bound to each other. For example:
1. Configure /dev/comedi0 to use some COMEDI hardware device with
digital I/O subdevices, but not a "comedi_bond" device.
2. Configure /dev/comedi1 as a "comedi_bond" device bound to
/dev/comedi0.
3. Unconfigure /dev/comedi0 and reconfigure it as a "comedi_bond" device
bound to /dev/comedi1.
Now we have /dev/comedi0 and /dev/comedi1 bound in a cycle. When an
operation is performed on the digital I/O subdevice of /dev/comedi0 for
example, it will try and perform the operation on /dev/comedi1, which
will try and perform the operation on /dev/comedi0. The task will end
up deadlocked trying to lock /dev/comedi0's mutex which it has already
locked.
I discovered that possibility while investigating fix sysbot crash
https://syzkaller.appspot.com/bug?extid=4a6138c17a47937dcea1 ("possible
deadlock in comedi_do_insn"), but I think that report may be a false
positive.
To avoid that, replace the calls to `comedi_open()` and `comedi_close()`
in "kcomedilib" with calls to `comedi_open_from()` and
`comedi_close_from()`. These take an extra parameter that indicates the
COMEDI minor device number from which the open or close is being
performed. `comedi_open_from()` will refuse to open the device if doing
so would result in a cycle. The cycle detection depends on the extra
parameter having the correct value for this device and also for existing
devices in the chain.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251027153748.4569-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add `comedi_open_from(path, from)` and `comedi_close_from(dev, from)` as
variants of the existing `comedi_from(path)` and `comedi_close(dev)`.
The additional `from` parameter is a minor device number that tells the
function that the COMEDI device is being opened or closed from another
COMEDI device if the value is in the range [0,
`COMEDI_NUM_BOARD_MINORS`-1]. In that case the function will refuse to
open the device if it would lead to a chain of devices opening each
other. (It will also impose a limit on the number of simultaneous opens
from one device to another because we need to count those.)
The new functions are intended to be used by the "comedi_bond" driver,
which is the only driver that uses the existing `comedi_open()` and
`comedi_close()` functions. The new functions will be used to avoid
some possible deadlock situations.
Replace the existing, exported `comedi_open()` and `comedi_close()`
functions with inline wrapper functions that call the newly exported
`comedi_open_from()` and `comedi_close_from()` functions.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251027153748.4569-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For interrupts from badly behaved hardware (as emulated by Syzbot), it
is possible for the Comedi core functions that manage the progress of
asynchronous data acquisition to be called from driver ISRs while no
asynchronous command has been set up, which can cause problems such as
invalid pointer dereferencing or dividing by zero.
Change those functions in the Comedi core to use this pattern: if
`comedi_get_is_subdevice_running(s)` returns `true` then call a safe
version of the function with the same name prefixed with an underscore,
followed by a call to `comedi_put_is_subdevice_running(s)`, otherwise
take some default action.
`comedi_get_is_subdevice_running(s)` returning `true` ensures that the
details of the asynchronous command will not be destroyed before the
matching call to `comedi_put_is_subdevice_running(s)`.
Replace calls to those functions from elsewhere in the Comedi core with
calls to the safe versions of the functions.
The modified functions are: `comedi_buf_read_alloc()`,
`comedi_buf_read_free()`, `comedi_buf_read_n_available()`,
`comedi_buf_read_samples()`, `comedi_buf_write_alloc()`,
`comedi_buf_write_free()`, `comedi_buf_write_samples()`,
`comedi_bytes_per_scan()`, `comedi_event()`, `comedi_handle_events()`,
`comedi_inc_scan_progress()`, `comedi_nsamples_left()`,
`comedi_nscans_left()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251023133001.8439-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For interrupts from badly behaved hardware (as emulated by Syzbot), it
is possible for the Comedi core functions that manage the progress of
asynchronous data acquisition to be called from driver ISRs while no
asynchronous command has been set up, which can cause problems such as
invalid pointer dereferencing or dividing by zero.
To help protect against that, introduce new functions to maintain a
reference counter for asynchronous commands that are being set up.
`comedi_get_is_subdevice_running(s)` will check if a command has been
set up on a subdevice and is still marked as running, and if so will
increment the reference counter and return `true`, otherwise it will
return `false` without modifying the reference counter.
`comedi_put_is_subdevice_running(s)` will decrement the reference
counter and set a completion event when decremented to 0.
Change the `do_cmd_ioctl()` function (responsible for setting up the
asynchronous command) to reinitialize the completion event and set the
reference counter to 1 before it marks the subdevice as running. Change
the `do_become_nonbusy()` function (responsible for destroying a
completed command) to call `comedi_put_is_subdevice_running(s)` and wait
for the completion event after marking the subdevice as not running.
Because the subdevice normally gets marked as not running before the
call to `do_become_nonbusy()` (and may also be called when the Comedi
device is being detached from the low-level driver), add a new flag
`COMEDI_SRF_BUSY` to the set of subdevice run-flags that indicates that
an asynchronous command was set up and will need to be destroyed. This
flag is set by `do_cmd_ioctl()` and cleared and checked by
`do_become_nonbusy()`.
Subsequent patches will change the Comedi core functions that are called
from low-level drivers for asynchrous command handling to make use of
the `comedi_get_is_subdevice_running()` and
`comedi_put_is_subdevice_running()` functions, and will modify the ISRs
of some of these low-level drivers if they dereference the subdevice's
`async` pointer directly.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251023133001.8439-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Syzbot identified an issue [1] in pcl818_ai_cancel(), which stems from
the fact that in case of early device detach via pcl818_detach(),
subdevice dev->read_subdev may not have initialized its pointer to
&struct comedi_async as intended. Thus, any such dereferencing of
&s->async->cmd will lead to general protection fault and kernel crash.
Mitigate this problem by removing a call to pcl818_ai_cancel() from
pcl818_detach() altogether. This way, if the subdevice setups its
support for async commands, everything async-related will be
handled via subdevice's own ->cancel() function in
comedi_device_detach_locked() even before pcl818_detach(). If no
support for asynchronous commands is provided, there is no need
to cancel anything either.
[1] Syzbot crash:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 1 UID: 0 PID: 6050 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:pcl818_ai_cancel+0x69/0x3f0 drivers/comedi/drivers/pcl818.c:762
...
Call Trace:
<TASK>
pcl818_detach+0x66/0xd0 drivers/comedi/drivers/pcl818.c:1115
comedi_device_detach_locked+0x178/0x750 drivers/comedi/drivers.c:207
do_devconfig_ioctl drivers/comedi/comedi_fops.c:848 [inline]
comedi_unlocked_ioctl+0xcde/0x1020 drivers/comedi/comedi_fops.c:2178
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
...
Reported-by: syzbot+fce5d9d5bd067d6fbe9b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fce5d9d5bd067d6fbe9b
Fixes: 00aba6e7b565 ("staging: comedi: pcl818: remove 'neverending_ai' from private data")
Cc: stable <stable@kernel.org>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251023141457.398685-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Syzbot identified an issue [1] in multiq3_attach() that induces a
task timeout due to open() or COMEDI_DEVCONFIG ioctl operations,
specifically, in the case of multiq3 driver.
This problem arose when syzkaller managed to craft weird configuration
options used to specify the number of channels in encoder subdevice.
If a particularly great number is passed to s->n_chan in
multiq3_attach() via it->options[2], then multiple calls to
multiq3_encoder_reset() at the end of driver-specific attach() method
will be running for minutes, thus blocking tasks and affected devices
as well.
While this issue is most likely not too dangerous for real-life
devices, it still makes sense to sanitize configuration inputs. Enable
a sensible limit on the number of encoder chips (4 chips max, each
with 2 channels) to stop this behaviour from manifesting.
[1] Syzbot crash:
INFO: task syz.2.19:6067 blocked for more than 143 seconds.
...
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5254 [inline]
__schedule+0x17c4/0x4d60 kernel/sched/core.c:6862
__schedule_loop kernel/sched/core.c:6944 [inline]
schedule+0x165/0x360 kernel/sched/core.c:6959
schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7016
__mutex_lock_common kernel/locking/mutex.c:676 [inline]
__mutex_lock+0x7e6/0x1350 kernel/locking/mutex.c:760
comedi_open+0xc0/0x590 drivers/comedi/comedi_fops.c:2868
chrdev_open+0x4cc/0x5e0 fs/char_dev.c:414
do_dentry_open+0x953/0x13f0 fs/open.c:965
vfs_open+0x3b/0x340 fs/open.c:1097
...
Reported-by: syzbot+7811bb68a317954a0347@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7811bb68a317954a0347
Fixes: 77e01cdbad51 ("Staging: comedi: add multiq3 driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251023132205.395753-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ALSA SoC driver for Tegra runs also on SoCs without the Tegra20 APB DMA
controller (e.g. Tegra234).
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Link: https://patch.msgid.link/20251126112926.4126757-1-flavra@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit b77b4a4815a9 ("gfs2: Rework freeze / thaw logic"),
the freeze error handling is broken because gfs2_do_thaw()
overwrites the 'error' variable, causing incorrect processing
of the original freeze error.
Fix this by calling gfs2_do_thaw() when gfs2_lock_fs_check_clean()
fails but ignoring its return value to preserve the original
freeze error for proper reporting.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b77b4a4815a9 ("gfs2: Rework freeze / thaw logic")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Alexey Velichayshiy <a.velichayshiy@ispras.ru>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Syzbot identified an issue [1] that crashes kernel, seemingly due to
unexistent callback dev->get_valid_routes(). By all means, this should
not occur as said callback must always be set to
get_zero_valid_routes() in __comedi_device_postconfig().
As the crash seems to appear exclusively in i386 kernels, at least,
judging from [1] reports, the blame lies with compat versions
of standard IOCTL handlers. Several of them are modified and
do not use comedi_unlocked_ioctl(). While functionality of these
ioctls essentially copy their original versions, they do not
have required sanity check for device's attached status. This,
in turn, leads to a possibility of calling select IOCTLs on a
device that has not been properly setup, even via COMEDI_DEVCONFIG.
Doing so on unconfigured devices means that several crucial steps
are missed, for instance, specifying dev->get_valid_routes()
callback.
Fix this somewhat crudely by ensuring device's attached status before
performing any ioctls, improving logic consistency between modern
and compat functions.
[1] Syzbot report:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
CR2: ffffffffffffffd6 CR3: 000000006c717000 CR4: 0000000000352ef0
Call Trace:
<TASK>
get_valid_routes drivers/comedi/comedi_fops.c:1322 [inline]
parse_insn+0x78c/0x1970 drivers/comedi/comedi_fops.c:1401
do_insnlist_ioctl+0x272/0x700 drivers/comedi/comedi_fops.c:1594
compat_insnlist drivers/comedi/comedi_fops.c:3208 [inline]
comedi_compat_ioctl+0x810/0x990 drivers/comedi/comedi_fops.c:3273
__do_compat_sys_ioctl fs/ioctl.c:695 [inline]
__se_compat_sys_ioctl fs/ioctl.c:638 [inline]
__ia32_compat_sys_ioctl+0x242/0x370 fs/ioctl.c:638
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
...
Reported-by: syzbot+ab8008c24e84adee93ff@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ab8008c24e84adee93ff
Fixes: 3fbfd2223a27 ("comedi: get rid of compat_alloc_user_space() mess in COMEDI_CHANINFO compat")
Cc: stable <stable@kernel.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20251023132234.395794-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Comedi low-level driver "c6xdigio" seems to be for a parallel port
connected device. When the Comedi core calls the driver's Comedi
"attach" handler `c6xdigio_attach()` to configure a Comedi to use this
driver, it tries to enable the parallel port PNP resources by
registering a PNP driver with `pnp_register_driver()`, but ignores the
return value. (The `struct pnp_driver` it uses has only the `name` and
`id_table` members filled in.) The driver's Comedi "detach" handler
`c6xdigio_detach()` unconditionally unregisters the PNP driver with
`pnp_unregister_driver()`.
It is possible for `c6xdigio_attach()` to return an error before it
calls `pnp_register_driver()` and it is possible for the call to
`pnp_register_driver()` to return an error (that is ignored). In both
cases, the driver should not be calling `pnp_unregister_driver()` as it
does in `c6xdigio_detach()`. (Note that `c6xdigio_detach()` will be
called by the Comedi core if `c6xdigio_attach()` returns an error, or if
the Comedi core decides to detach the Comedi device from the driver for
some other reason.)
The unconditional call to `pnp_unregister_driver()` without a previous
successful call to `pnp_register_driver()` will cause
`driver_unregister()` to issue a warning "Unexpected driver
unregister!". This was detected by Syzbot [1].
Also, the PNP driver registration and unregistration should be done at
module init and exit time, respectively, not when attaching or detaching
Comedi devices to the driver. (There might be more than one Comedi
device being attached to the driver, although that is unlikely.)
Change the driver to do the PNP driver registration at module init time,
and the unregistration at module exit time. Since `c6xdigio_detach()`
now only calls `comedi_legacy_detach()`, remove the function and change
the Comedi driver "detach" handler to `comedi_legacy_detach`.
-------------------------------------------
[1] Syzbot sample crash report:
Unexpected driver unregister!
WARNING: CPU: 0 PID: 5970 at drivers/base/driver.c:273 driver_unregister drivers/base/driver.c:273 [inline]
WARNING: CPU: 0 PID: 5970 at drivers/base/driver.c:273 driver_unregister+0x90/0xb0 drivers/base/driver.c:270
Modules linked in:
CPU: 0 UID: 0 PID: 5970 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
RIP: 0010:driver_unregister drivers/base/driver.c:273 [inline]
RIP: 0010:driver_unregister+0x90/0xb0 drivers/base/driver.c:270
Code: 48 89 ef e8 c2 e6 82 fc 48 89 df e8 3a 93 ff ff 5b 5d e9 c3 6d d9 fb e8 be 6d d9 fb 90 48 c7 c7 e0 f8 1f 8c e8 51 a2 97 fb 90 <0f> 0b 90 90 5b 5d e9 a5 6d d9 fb e8 e0 f4 41 fc eb 94 e8 d9 f4 41
RSP: 0018:ffffc9000373f9a0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff8ff24720 RCX: ffffffff817b6ee8
RDX: ffff88807c932480 RSI: ffffffff817b6ef5 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff8ff24660
R13: dffffc0000000000 R14: 0000000000000000 R15: ffff88814cca0000
FS: 000055556dab1500(0000) GS:ffff8881249d9000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f77f285cd0 CR3: 000000007d871000 CR4: 00000000003526f0
Call Trace:
<TASK>
comedi_device_detach_locked+0x12f/0xa50 drivers/comedi/drivers.c:207
comedi_device_detach+0x67/0xb0 drivers/comedi/drivers.c:215
comedi_device_attach+0x43d/0x900 drivers/comedi/drivers.c:1011
do_devconfig_ioctl+0x1b1/0x710 drivers/comedi/comedi_fops.c:872
comedi_unlocked_ioctl+0x165d/0x2f00 drivers/comedi/comedi_fops.c:2178
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc05798eec9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffcf8184238 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fc057be5fa0 RCX: 00007fc05798eec9
RDX: 0000200000000080 RSI: 0000000040946400 RDI: 0000000000000003
RBP: 00007fc057a11f91 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fc057be5fa0 R14: 00007fc057be5fa0 R15: 0000000000000003
</TASK>
-------------------------------------------
Reported-by: syzbot+6616bba359cec7a1def1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6616bba359cec7a1def1
Fixes: 2c89e159cd2f ("Staging: comedi: add c6xdigio driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251023123141.6537-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Function new_inode() returns a new inode with inode->i_mapping->gfp_mask
set to GFP_HIGHUSER_MOVABLE. This value includes the __GFP_FS flag, so
allocations in that address space can recurse into filesystem memory
reclaim. We don't want that to happen because it can consume a
significant amount of stack memory.
Worse than that is that it can also deadlock: for example, in several
places, gfs2_unstuff_dinode() is called inside filesystem transactions.
This calls filemap_grab_folio(), which can allocate a new folio, which
can trigger memory reclaim. If memory reclaim recurses into the
filesystem and starts another transaction, a deadlock will ensue.
To fix these kinds of problems, prevent memory reclaim from recursing
into filesystem code by making sure that the gfp_mask of inode address
spaces doesn't include __GFP_FS.
The "meta" and resource group address spaces were already using GFP_NOFS
as their gfp_mask (which doesn't include __GFP_FS). The default value
of GFP_HIGHUSER_MOVABLE is less restrictive than GFP_NOFS, though. To
avoid being overly limiting, use the default value and only knock off
the __GFP_FS flag. I'm not sure if this will actually make a
difference, but it also shouldn't hurt.
This patch is loosely based on commit ad22c7a043c2 ("xfs: prevent stack
overflows from page cache allocation").
Fixes xfstest generic/273.
Fixes: dc0b9435238c ("gfs: Don't use GFP_NOFS in gfs2_unstuff_dinode")
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
|
|
There hasn't been any substantive work on the ocxl driver since 2020, and
all patches since then have been minor fixes or part of treewide or
arch-wide changes. Frederic and I are no longer spending much time on this
driver.
Downgrade the status of the ocxl driver to Odd Fixes, to reflect the
current reality.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Link: https://patch.msgid.link/20251120-ocxl-odd-fixes-v1-1-8b766f114621@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mei_register() fails to release the device reference in error paths
after device_initialize(). During normal device registration, the
reference is properly handled through mei_deregister() which calls
device_destroy(). However, in error handling paths (such as cdev_alloc
failure, cdev_add failure, etc.), missing put_device() calls cause
reference count leaks, preventing the device's release function
(mei_device_release) from being called and resulting in memory leaks
of mei_device.
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 7704e6be4ed2 ("mei: hook mei_device on class device")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251104020133.5017-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
INTEL_MEI_GSC depends on either i915 or Xe
and can be present when either of above is present.
Cc: stable <stable@kernel.org>
Fixes: 87a4c85d3a3e ("drm/xe/gsc: add gsc device support")
Tested-by: Baoli Zhang <baoli.zhang@intel.com>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251109153533.3179787-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251027114118.390775-1-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This configuration was missing from the initial commit.
Found by Jiri Benc <jbenc@redhat.com>
Fixes: c0a3873b9938 ("ASoC: nau8325: new driver")
Cc: Seven Lee <wtli@nuvoton.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-3-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-2-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver runs also on Tegra SoCs without a Tegra20 APB DMA controller
(e.g. Tegra234).
Remove the Kconfig dependency on TEGRA20_APB_DMA; in addition, amend the
help text to reflect the fact that this driver works on SoCs different from
Tegra114.
Fixes: bb9667d8187b ("arm64: tegra: Add SPI device tree nodes for Tegra234")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Link: https://patch.msgid.link/20251126095027.4102004-1-flavra@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The previous patches in this series illustrate why the List::remove
method is really dangerous. I think the real takeaway here is to replace
the linked lists with a different data structure without this unsafe
footgun, but for now we fix the bugs and add a warning to the docs.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patch.msgid.link/20251111-binder-fix-list-remove-v1-3-8ed14a0da63d@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Similar to the previous commit, List::remove is used on
delivered_deaths, so do not use mem::take on it as that may result in
violations of the List::remove safety requirements.
I don't think this particular case can be triggered because it requires
fd close to run in parallel with an ioctl on the same fd. But let's not
tempt fate.
Cc: stable@vger.kernel.org
Fixes: eafedbc7c050 ("rust_binder: add Rust Binder driver")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patch.msgid.link/20251111-binder-fix-list-remove-v1-2-8ed14a0da63d@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rust Binder contains the following unsafe operation:
// SAFETY: A `NodeDeath` is never inserted into the death list
// of any node other than its owner, so it is either in this
// death list or in no death list.
unsafe { node_inner.death_list.remove(self) };
This operation is unsafe because when touching the prev/next pointers of
a list element, we have to ensure that no other thread is also touching
them in parallel. If the node is present in the list that `remove` is
called on, then that is fine because we have exclusive access to that
list. If the node is not in any list, then it's also ok. But if it's
present in a different list that may be accessed in parallel, then that
may be a data race on the prev/next pointers.
And unfortunately that is exactly what is happening here. In
Node::release, we:
1. Take the lock.
2. Move all items to a local list on the stack.
3. Drop the lock.
4. Iterate the local list on the stack.
Combined with threads using the unsafe remove method on the original
list, this leads to memory corruption of the prev/next pointers. This
leads to crashes like this one:
Unable to handle kernel paging request at virtual address 000bb9841bcac70e
Mem abort info:
ESR = 0x0000000096000044
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000044, ISS2 = 0x00000000
CM = 0, WnR = 1, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[000bb9841bcac70e] address between user and kernel address ranges
Internal error: Oops: 0000000096000044 [#1] PREEMPT SMP
google-cdd 538c004.gcdd: context saved(CPU:1)
item - log_kevents is disabled
Modules linked in: ... rust_binder
CPU: 1 UID: 0 PID: 2092 Comm: kworker/1:178 Tainted: G S W OE 6.12.52-android16-5-g98debd5df505-4k #1 f94a6367396c5488d635708e43ee0c888d230b0b
Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: MUSTANG PVT 1.0 based on LGA (DT)
Workqueue: events _RNvXs6_NtCsdfZWD8DztAw_6kernel9workqueueINtNtNtB7_4sync3arc3ArcNtNtCs8QPsHWIn21X_16rust_binder_main7process7ProcessEINtB5_15WorkItemPointerKy0_E3runB13_ [rust_binder]
pstate: 23400005 (nzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : _RNvXs3_NtCs8QPsHWIn21X_16rust_binder_main7processNtB5_7ProcessNtNtCsdfZWD8DztAw_6kernel9workqueue8WorkItem3run+0x450/0x11f8 [rust_binder]
lr : _RNvXs3_NtCs8QPsHWIn21X_16rust_binder_main7processNtB5_7ProcessNtNtCsdfZWD8DztAw_6kernel9workqueue8WorkItem3run+0x464/0x11f8 [rust_binder]
sp : ffffffc09b433ac0
x29: ffffffc09b433d30 x28: ffffff8821690000 x27: ffffffd40cbaa448
x26: ffffff8821690000 x25: 00000000ffffffff x24: ffffff88d0376578
x23: 0000000000000001 x22: ffffffc09b433c78 x21: ffffff88e8f9bf40
x20: ffffff88e8f9bf40 x19: ffffff882692b000 x18: ffffffd40f10bf00
x17: 00000000c006287d x16: 00000000c006287d x15: 00000000000003b0
x14: 0000000000000100 x13: 000000201cb79ae0 x12: fffffffffffffff0
x11: 0000000000000000 x10: 0000000000000001 x9 : 0000000000000000
x8 : b80bb9841bcac706 x7 : 0000000000000001 x6 : fffffffebee63f30
x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
x2 : 0000000000004c31 x1 : ffffff88216900c0 x0 : ffffff88e8f9bf00
Call trace:
_RNvXs3_NtCs8QPsHWIn21X_16rust_binder_main7processNtB5_7ProcessNtNtCsdfZWD8DztAw_6kernel9workqueue8WorkItem3run+0x450/0x11f8 [rust_binder bbc172b53665bbc815363b22e97e3f7e3fe971fc]
process_scheduled_works+0x1c4/0x45c
worker_thread+0x32c/0x3e8
kthread+0x11c/0x1c8
ret_from_fork+0x10/0x20
Code: 94218d85 b4000155 a94026a8 d10102a0 (f9000509)
---[ end trace 0000000000000000 ]---
Thus, modify Node::release to pop items directly off the original list.
Cc: stable@vger.kernel.org
Fixes: eafedbc7c050 ("rust_binder: add Rust Binder driver")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patch.msgid.link/20251111-binder-fix-list-remove-v1-1-8ed14a0da63d@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
binder_apply_fd_fixups()
The kernel-doc for binder_apply_fd_fixups() was missing a description of
its return value, which triggers a kernel-doc warning.
Add the missing "Return:" entry to doc that the function returns 0 on
success or a negative errno on failure.
Signed-off-by: Sunday Adelodun <adelodunolaoluwa@yahoo.com>
Link: https://patch.msgid.link/20251121111203.21800-2-adelodunolaoluwa@yahoo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kernel-doc comment for binder_ctl_ioctl() lacks descriptions for the
@file, @cmd, and @arg parameters, which triggers warnings during
documentation builds.
Add the missing parameter descriptions to keep the
kernel-doc consistent and free of warnings.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511201725.ni2HZ2PP-lkp@intel.com/
Signed-off-by: Sunday Adelodun <adelodunolaoluwa@yahoo.com>
Link: https://patch.msgid.link/20251121111203.21800-1-adelodunolaoluwa@yahoo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Alice has been reviewing binder patches for years now and has a strong
understanding of the driver, so this patch is well overdue. While here
also clean up the list from folks who haven't been active for a while.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Joel Fernandes <joelagnelf@nvidia.com>
Acked-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251107224824.644832-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When looking at flamegraphs, there is a pretty large entry for the
function call drop_in_place::<Option<Allocation>> which in turn calls
drop_in_place::<Allocation>. Combined with the looper_need_return
condition, this means that the generated code looks like this:
if let Some(buffer) = buffer {
if buffer.looper_need_return_on_free() {
self.inner.lock().looper_need_return = true;
}
}
drop_in_place::<Option<Allocation>>() { // not inlined
if let Some(buffer) = buffer {
drop_in_place::<Allocation>(buffer);
}
}
This kind of situation where you check X and then check X again is
normally optimized into a single condition, but in this case due to the
non-inlined function call to drop_in_place::<Option<Allocation>>, that
optimization does not happen.
Furthermore, the drop_in_place::<Allocation> call is only two-thirds of
the drop_in_place::<Option<Allocation>> call in the flamegraph. This
indicates that this double condition is not performing well. Also, last
time I looked at Binder perf, I remember finding that the destructor of
Allocation was involved with many branch mispredictions.
Thus, change this code to look like this:
if let Some(buffer) = buffer {
if buffer.looper_need_return_on_free() {
self.inner.lock().looper_need_return = true;
}
drop_in_place::<Allocation>(buffer);
}
by dropping the Allocation directly. Flamegraphs confirm that the
drop_in_place::<Option<Allocation>> call disappears from this change.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20251029-binder-bcfreebuf-option-v1-1-4d282be0439f@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Binder always treats the ioctl argument as a pointer. In this scenario,
the idiomatic way to implement compat_ioctl is to use compat_ptr_ioctl.
Thus update Rust Binder to do that.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20251031-binder-compatptrioctl-v2-1-3d05b5cc058e@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The binder_alloc_exhaustive_test kunit test takes over 30s to complete
and the kunit framework reports:
# binder_alloc_exhaustive_test: Test should be marked slow (runtime: 33.842881934s)
Mark the test as suggested to silence the warning.
Cc: Tiffany Yang <ynaffit@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Tiffany Yang <ynaffit@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251024161525.1732874-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Depmod fails for a kernel made with:
make allnoconfig
echo -e "CONFIG_MODULES=y\nCONFIG_SERIAL_8250=m\nCONFIG_SERIAL_8250_EXTENDED=y\nCONFIG_SERIAL_8250_RSA=y" >> .config
make olddefconfig
...due to a dependency loop:
depmod: ERROR: Cycle detected: 8250 -> 8250_base -> 8250
depmod: ERROR: Found 2 modules in dependency cycles!
This is caused by the move of 8250 RSA code from 8250_port.c (in
8250_base.ko) into 8250_rsa.c (in 8250.ko) by the commit 5a128fb475fb
("serial: 8250: move RSA functions to 8250_rsa.c"). The commit
b20d6576cdb3 ("serial: 8250: export RSA functions") tried to fix a
missing symbol issue with EXPORTs but those then cause this dependency
cycle.
Break dependency loop by moving 8250_rsa.o from 8250.ko to 8250_base.ko
and by passing univ8250_port_base_ops to univ8250_rsa_support() that
can make a local copy of it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Alex Davis <alex47794@gmail.com>
Fixes: 5a128fb475fb ("serial: 8250: move RSA functions to 8250_rsa.c")
Fixes: b20d6576cdb3 ("serial: 8250: export RSA functions")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/all/87frc3sd8d.fsf@posteo.net/
Link: https://lore.kernel.org/all/CADiockCvM6v+d+UoFZpJSMoLAdpy99_h-hJdzUsdfaWGn3W7-g@mail.gmail.com/
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251110105043.4062-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
