| Age | Commit message (Collapse) | Author |
|---|
|
In test_clidr() if an empty cache level is not found then the TEST_ASSERT
will not fire. Fix this by considering all 7 possible levels when iterating
through the hierarchy. Found by inspection.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
ARM64_FEATURE_FIELD_BITS is set to 4 but not all ID register fields are 4
bits. See for instance ID_AA64SMFR0_EL1. The last user of this define,
ARM64_FEATURE_FIELD_BITS, is the set_id_regs selftest. Its logic assumes
the fields aren't a single bits; assert that's the case and stop using the
define. As there are no more users, ARM64_FEATURE_FIELD_BITS is removed
from the arm64 tools sysreg.h header. A separate commit removes this from
the kernel version of the header.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The ATOMIC_FETCH_OP_AND and ATOMIC64_FETCH_OP_AND macros accept 'mb' and
'cl' parameters but never use them in their implementation. These macros
simply delegate to the corresponding andnot functions, which handle the
actual atomic operations and memory barriers.
Signed-off-by: Seongsu Park <sgsu.park@samsung.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The driver uses DMA but does not mark it as a prerequisite in
Kconfig. As it is also defined with COMPILE_TEST, autobuilders complain
about certain symbols not being available when linking on architectures
without DMA support (?) like sh.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511071114.8WeW2GZK-lkp@intel.com
Cc: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Prepare for the advent of globally available common field_get() and
field_prep() macros by undefining the symbols before defining local
variants. This prevents redefinition warnings from the C preprocessor
when introducing the common macros later.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and CAN. No known outstanding
regressions.
Current release - regressions:
- mptcp: initialize rcv_mss before calling tcp_send_active_reset()
- eth: mlx5e: fix validation logic in rate limiting
Previous releases - regressions:
- xsk: avoid data corruption on cq descriptor number
- bluetooth:
- prevent race in socket write iter and sock bind
- fix not generating mackey and ltk when repairing
- can:
- kvaser_usb: fix potential infinite loop in command parsers
- rcar_canfd: fix CAN-FD mode as default
- eth:
- veth: reduce XDP no_direct return section to fix race
- virtio-net: avoid unnecessary checksum calculation on guest RX
Previous releases - always broken:
- sched: fix TCF_LAYER_TRANSPORT handling in tcf_get_base_ptr()
- bluetooth: mediatek: fix kernel crash when releasing iso interface
- vhost: rewind next_avail_head while discarding descriptors
- eth:
- r8169: fix RTL8127 hang on suspend/shutdown
- aquantia: add missing descriptor cache invalidation on ATL2
- dsa: microchip: fix resource releases in error path"
* tag 'net-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
mptcp: Initialise rcv_mss before calling tcp_send_active_reset() in mptcp_do_fastclose().
net: fec: do not register PPS event for PEROUT
net: fec: do not allow enabling PPS and PEROUT simultaneously
net: fec: do not update PEROUT if it is enabled
net: fec: cancel perout_timer when PEROUT is disabled
net: mctp: unconditionally set skb->dev on dst output
net: atlantic: fix fragment overflow handling in RX path
MAINTAINERS: separate VIRTIO NET DRIVER and add netdev
virtio-net: avoid unnecessary checksum calculation on guest RX
eth: fbnic: Fix counter roll-over issue
mptcp: clear scheduled subflows on retransmit
net: dsa: sja1105: fix SGMII linking at 10M or 100M but not passing traffic
s390/net: list Aswin Karuvally as maintainer
net: wwan: mhi: Keep modem name match with Foxconn T99W640
vhost: rewind next_avail_head while discarding descriptors
net/sched: em_canid: fix uninit-value in em_canid_match
can: rcar_canfd: Fix CAN-FD mode as default
xsk: avoid data corruption on cq descriptor number
r8169: fix RTL8127 hang on suspend/shutdown
net: sxgbe: fix potential NULL dereference in sxgbe_rx()
...
|
|
Merge series from Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>:
Airoha EN7523 snfi controller almost identical to AN7581 one, so the same
driver can be used. The only known difference appears in the very specific
boot conditions, when attached serial console force EN7523 SoC boots
in undocumented (reserved) mode. In this mode dma reading of the flash
works incorrectly.
This patch series:
* add support of EN7523 SoC
* add spinand node to en7523 dts (so spinand flash finally becomes usable)
* updates dt-bindings to mark driver as compatible with en7523
* disable dma usage to prevent possible data damage if booting in
reserved mode was detected.
|
|
If power state is retained between suspend/resume cycle, we don't need
to perform full GT re-initialization. Introduce runtime helpers for GT
which greatly reduce suspend/resume delay.
v2: Drop redundant xe_gt_sanitize() and xe_guc_ct_stop() (Daniele)
Use runtime naming for guc helpers (Daniele)
v3: Drop redundant logging, add kernel doc (Michal)
Use runtime naming for ct helpers (Michal)
v4: Fix tags (Rodrigo)
v5: Include host_l2_vram workaround (Daniele)
Reuse xe_guc_submit_enable/disable() helpers (Daniele)
Co-developed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251030122357.128825-5-raag.jadav@intel.com
|
|
We hold an additional reference to the runtime PM to keep PF in D0
during VFs lifetime, as our VFs do not implement the PM capability.
This means we should never be runtime suspending as long as VFs are
enabled.
v8: Add !IS_SRIOV_VF() assert (Matthew Brost)
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251030122357.128825-4-raag.jadav@intel.com
|
|
Introduce pause/unpause() helpers which stop/start further runs of
submission tasks on given GuC and can be called from PF context. This
is in preparation of usecases where we simply need to stop/start the
scheduler without losing GuC state and don't require dealing with VF
migration.
v7: Reword commit message (Matthew Brost)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251030122357.128825-3-raag.jadav@intel.com
|
|
Now that pause/unpause() helpers have been updated for VF migration
usecase, update their naming to match the functionality and while at it,
add IS_SRIOV_VF() assert to make sure they are not abused.
v7: Add IS_SRIOV_VF() assert (Matthew Brost)
Use "vf" suffix (Michal)
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251030122357.128825-2-raag.jadav@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull platform driver fixes from Ilpo Järvinen:
- arm64/thinkpad-t14s-ec:
- Fix IRQ race condition
- Sleep after EC access
- intel/punit_ipc: Fix memory corruption
* tag 'platform-drivers-x86-v6.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel: punit_ipc: fix memory corruption
platform: arm64: thinkpad-t14s-ec: sleep after EC access
platform: arm64: thinkpad-t14s-ec: fix IRQ race condition
|
|
The soundwire regmap that may be allocated during probe is not freed on
late probe failures.
Add the missing error handling.
Fixes: be2af391cea0 ("ASoC: codecs: Add WCD939x Soundwire devices driver")
Cc: stable@vger.kernel.org # 6.9
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251127135057.2216-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the __free(kfree) cleanup to replace instances of manually
calling kfree(). Also make some code path simplifications that this
allows.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127155817.1374079-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The i2c regmap allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: 3a2a8cc3fe24 ("hwmon: (max6697) Convert to use regmap")
Cc: stable@vger.kernel.org # 6.12
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20251127134351.1585-1-johan@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Static declaration by default are 0 or NULL, no need to initialise
them explicitly. Remove unneeded PM related macro.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Link: https://patch.msgid.link/20251126075558.2035012-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use SPI_MODE_X_MASK instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Link: https://patch.msgid.link/20251126075558.2035012-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a temporary variable to keep a pointer to struct device.
Utilise it where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Link: https://patch.msgid.link/20251126075558.2035012-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
First of all, the convention in the kernel that we do not issue
error messages for -ENOMEM. Second, it's ignored by dev_err_probe().
Replace dead code by a simple return statement.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Link: https://patch.msgid.link/20251126075558.2035012-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
min_t(int, a, b) casts an 'unsigned int' to 'int'. This might lead
to the cases when big number is wrongly chosen. On the other hand,
the SPI transfer length is unsigned and driver uses signed type for
an unknown reason. Change the type of the transfer length to be
unsigned and convert use min() instead of min_t().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Laight <david.laight.linux@gmail.com>
Reviewed-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Link: https://patch.msgid.link/20251126075558.2035012-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure to drop the reference taken when looking up the PMU device and
its regmap.
Note that holding a reference to a device does not prevent its regmap
from going away so there is no point in keeping the reference.
Fixes: 0b7c6075022c ("soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs")
Cc: stable@vger.kernel.org # 6.9
Cc: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251121121852.16825-1-johan@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
fill_pool_map is used to suppress nesting violations caused by acquiring
a spinlock_t (from within the memory allocator) while holding a
raw_spinlock_t. The used annotation is wrong.
LD_WAIT_SLEEP is for always sleeping lock types such as mutex_t.
LD_WAIT_CONFIG is for lock type which are sleeping while spinning on
PREEMPT_RT such as spinlock_t.
Use LD_WAIT_CONFIG as override.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251127153652.291697-3-bigeasy@linutronix.de
|
|
The pool of free objects is refilled on several occasions such as object
initialisation. On PREEMPT_RT refilling is limited to preemptible
sections due to sleeping locks used by the memory allocator. The system
boots with disabled interrupts so the pool can not be refilled.
If too many objects are initialized and the pool gets empty then
debugobjects disables itself.
Refiling can also happen early in the boot with disabled interrupts as
long as the scheduler is not operational. If the scheduler can not
preempt a task then a sleeping lock can not be contended.
Allow to additionally refill the pool if the scheduler is not
operational.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251127153652.291697-2-bigeasy@linutronix.de
|
|
imx_dsp_rproc_add_carveout()
The devm_ioremap_resource_wc() function never returns NULL, it returns
error pointers. Update the error checking to match.
Fixes: 67a7bc7f0358 ("remoteproc: Use of_reserved_mem_region_* functions for "memory-region"")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/aSf6OerBbPcxBUVt@stanley.mountain
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The recent transition to use of_reserved_mem_region_to_resource()
changes the while loop to a for loop, but the increment of the "index"
variable was left behind at the end of the loop, as highlighted by the
following error/warning:
error: variable 'index' is incremented both in the loop header and in the loop body [-Werror,-Wfor-loop-analysis]
Drop the extra increment to avoid skipping over every other
memory-region in the loop.
Fixes: 67a7bc7f0358 ("remoteproc: Use of_reserved_mem_region_* functions for "memory-region"")
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251126-st-remoteproc-double-index-v1-1-3b0a8b21ac18@oss.qualcomm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq changes for v6.19 from Chanwoo Choi:
"- Move governor.h under include/linux/ and rename to devfreq-governor.h
in order to allow devfreq governor definitions in out of drivers/devfreq/.
- Fix potential use-after-free issue of OPP handling on hisi_uncore_freq.c
- Use min() to improve the readability on tegra30-devfreq.c
- Fix typo in DFSO_DOWNDIFFERENTIAL macro name on governor_simpleondemand.c"
* tag 'devfreq-next-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: Fix typo in DFSO_DOWNDIFFERENTIAL macro name
PM / devfreq: tegra30: use min to simplify actmon_cpu_to_emc_rate
PM / devfreq: hisi: Fix potential UAF in OPP handling
PM / devfreq: Move governor.h to a public header location
|
|
Online repair is now merged in upstream, no need to point to patchset
links anymore.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
suspend
Commit 8c3170628a9c ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f77cbb9a3e5d ("ARM: dts: exynos: Add bcm4334 device node to Trats2")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-5-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
suspend
Commit 8c3170628a9c ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: a19f6efc01df ("ARM: dts: exynos: Enable WLAN support for the Trats board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-4-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
suspend
Commit 8c3170628a9c ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-3-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Commit 8c3170628a9c ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f1b0ffaa686f ("ARM: dts: exynos: Enable WLAN support for the UniversalC210 board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-2-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Commit 78b72897a5c8 ("soc: samsung: exynos-pmu: Enable CPU Idle for
gs101") added system wide suspend/resume callbacks to Exynos PMU driver,
but some items used by these callbacks are initialized only on
GS101-compatible boards. Move that initialization to exynos_pmu_probe()
to avoid potential lockdep warnings like below observed during system
suspend/resume cycle:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 UID: 0 PID: 2134 Comm: rtcwake Not tainted 6.18.0-rc7-next-20251126-00039-g1d656a1af243 #11794 PREEMPT
Hardware name: Samsung Exynos (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x88
dump_stack_lvl from register_lock_class+0x970/0x988
register_lock_class from __lock_acquire+0xc8/0x29ec
__lock_acquire from lock_acquire+0x134/0x39c
lock_acquire from _raw_spin_lock+0x38/0x48
_raw_spin_lock from exynos_cpupm_suspend_noirq+0x18/0x34
exynos_cpupm_suspend_noirq from dpm_run_callback+0x98/0x2b8
dpm_run_callback from device_suspend_noirq+0x8c/0x310
Fixes: 78b72897a5c8 ("soc: samsung: exynos-pmu: Enable CPU Idle for gs101")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126110038.3326768-1-m.szyprowski@samsung.com
[krzk: include calltrace into commit msg]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The macro for_each_console_srcu iterates over all registered consoles. It's
implied that all registered consoles have CON_ENABLED flag set, making
the check for the flag unnecessary. Call console_is_usable function to
fully verify if the given console is usable before calling the ->unblank
callback.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20251121-printk-cleanup-part2-v2-3-57b8b78647f4@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
All consoles found on for_each_console are registered, meaning that all
of them have the CON_ENABLED flag set. Since NBCON was introduced it's
important to check if a given console also implements the NBCON callbacks.
The function console_is_usable does exactly that.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20251121-printk-cleanup-part2-v2-2-57b8b78647f4@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The original code tried to find a console that has CON_BOOT _or_
CON_ENABLED flag set. The flag CON_ENABLED is set to all registered
consoles, so in this case this check is always true, even for the
CON_BOOT consoles.
The initial intent of the kgdboc_earlycon_init was to get a console
early (CON_BOOT) or later on in the process (CON_ENABLED). The
code was using for_each_console macro, meaning that all console structs
were previously registered on the printk() machinery. At this point,
any console found on for_each_console is safe for kgdboc_earlycon_init
to use.
Dropping the check makes the code cleaner, and avoids further confusion
by future readers of the code.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20251121-printk-cleanup-part2-v2-1-57b8b78647f4@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Make do_proc_douintvec static and export proc_douintvec_conv wrapper
function for external use. This is to keep with the design in sysctl.c.
Update fs/pipe.c to use the new public API.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Create a converter for the pipe-max-size proc_handler using the
SYSCTL_UINT_CONV_CUSTOM. Move SYSCTL_CONV_IDENTITY macro to the sysctl
header to make it available for pipe size validation. Keep returning
-EINVAL when (val == 0) by using a range checking converter and setting
the minimal valid value (extern1) to SYSCTL_ONE. Keep round_pipe_size by
passing it as the operation for SYSCTL_USER_TO_KERN_INT_CONV.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Move proc_doulongvec_ms_jiffies_minmax to kernel/time/jiffies.c. Create
a non static wrapper function proc_doulongvec_minmax_conv that
forwards the custom convmul and convdiv argument values to the internal
do_proc_doulongvec_minmax. Remove unused linux/times.h include from
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Move integer jiffies converters (proc_dointvec{_,_ms_,_userhz_}jiffies
and proc_dointvec_ms_jiffies_minmax) to kernel/time/jiffies.c. Error
stubs for when CONFIG_PRCO_SYSCTL is not defined are not reproduced
because all the jiffies converters go through proc_dointvec_conv which
is already stubbed. This is part of the greater effort to move sysctl
logic out of kernel/sysctl.c thereby reducing merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Move SYSCTL_USER_TO_KERN_UINT_CONV and SYSCTL_UINT_CONV_CUSTOM macros to
include/linux/sysctl.h. No need to embed sysctl_kern_to_user_uint_conv
in a macro as it will not need a custom kernel pointer operation. This
is a preparation commit to enable jiffies converter creation outside
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Move direction macros (SYSCTL_{USER_TO_KERN,KERN_TO_USER}) and the
integer converter macros (SYSCTL_{USER_TO_KERN,KERN_TO_USER}_INT_CONV,
SYSCTL_INT_CONV_CUSTOM) into include/linux/sysctl.h. This is a
preparation commit to enable jiffies converter creation outside
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
The new non-static proc_dointvec_conv forwards a custom converter
function to do_proc_dointvec from outside the sysctl scope. Rename the
do_proc_dointvec call points so any future changes to proc_dointvec_conv
are propagated in sysctl.c This is a preparation commit that allows the
integer jiffie converter functions to move out of kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-11-26
this is a pull request of 27 patches for net-next/main.
The first 17 patches are by Vincent Mailhol and Oliver Hartkopp and
add CAN XL support to the CAN netlink interface.
Geert Uytterhoeven and Biju Das provide 7 patches for the rcar_canfd
driver to add suspend/resume support.
The next 2 patches are by Markus Schneider-Pargmann and add them as
the m_can maintainer.
Conor Dooley's patch updates the mpfs-can DT bindungs.
linux-can-next-for-6.19-20251126
* tag 'linux-can-next-for-6.19-20251126' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (27 commits)
dt-bindings: can: mpfs: document resets
MAINTAINERS: Simplify m_can section
MAINTAINERS: Add myself as m_can maintainer
can: rcar_canfd: Add suspend/resume support
can: rcar_canfd: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
can: rcar_canfd: Invert CAN clock and close_candev() order
can: rcar_canfd: Extract rcar_canfd_global_{,de}init()
can: rcar_canfd: Use devm_clk_get_optional() for RAM clk
can: rcar_canfd: Invert global vs. channel teardown
can: rcar_canfd: Invert reset assert order
can: dev: print bitrate error with two decimal digits
can: raw: instantly reject unsupported CAN frames
can: add dummy_can driver
can: calc_bittiming: add can_calc_sample_point_pwm()
can: calc_bittiming: add can_calc_sample_point_nrz()
can: calc_bittiming: replace misleading "nominal" by "reference"
can: netlink: add PWM netlink interface
can: calc_bittiming: add PWM calculation
can: bittiming: add PWM validation
can: bittiming: add PWM parameters
...
====================
Link: https://patch.msgid.link/20251126120106.154635-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The buffer arg in proc handler functions have been void* (no __user
qualifier) since commit 32927393dc1c ("sysctl: pass kernel pointers to
->proc_handler"). The __user qualifier was erroneously brought back in
commit 0df8bdd5e3b3 ("stackleak: move stack_erasing sysctl to
stackleak.c"). This fixes the error by removing the __user qualifier.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510221719.3ggn070M-lkp@intel.com/
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Replace sysctl_user_to_kern_uint_conv function with
SYSCTL_USER_TO_KERN_UINT_CONV macro that accepts u_ptr_op parameter for
value transformation. Replacing sysctl_kern_to_user_uint_conv is not
needed as it will only be used from within sysctl.c. This is a
preparation commit for creating a custom converter in fs/pipe.c. No
Functional changes are intended.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Add k_ptr_range_check parameter to SYSCTL_UINT_CONV_CUSTOM macro to
enable range validation using table->extra1/extra2. Replace
do_proc_douintvec_minmax_conv with do_proc_uint_conv_minmax generated
by the updated macro.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Pass sysctl_{user_to_kern,kern_to_user}_uint_conv (unsigned integer
uni-directional converters) to the new SYSCTL_UINT_CONV_CUSTOM macro
to create do_proc_douintvec_conv's replacement (do_proc_uint_conv).
This is a preparation commit to use the unsigned integer converter from
outside sysctl. No functional change is intended.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Extend the SYSCTL_INT_CONV_CUSTOM macro with a k_ptr_range_check
parameter to conditionally generate range validation code. When enabled,
validation is done against table->extra1 (min) and table->extra2 (max)
bounds before assignment. Add base minmax and ms_jiffies_minmax
converter instances that utilize the range checking functionality.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
New SYSCTL_INT_CONV_CUSTOM macro creates "bi-directional" converters
from a user-to-kernel and a kernel-to-user functions. Replace integer
versions of do_proc_*_conv functions with the ones from the new macro.
Rename "_dointvec_" to just "_int_" as these converters are not applied
to vectors and the "do" is already in the name.
Move the USER_HZ validation directly into proc_dointvec_userhz_jiffies()
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Eight converter functions are created using two new macros
(SYSCTL_USER_TO_KERN_INT_CONV & SYSCTL_KERN_TO_USER_INT_CONV); they are
called from four pre-existing converter functions: do_proc_dointvec_conv
and do_proc_dointvec{,_userhz,_ms}_jiffies_conv. The function names
generated by the macros are differentiated by a string suffix passed as
the first macro argument.
The SYSCTL_USER_TO_KERN_INT_CONV macro first executes the u_ptr_op
operation, then checks for overflow, assigns sign (-, +) and finally
writes to the kernel var with WRITE_ONCE; it always returns an -EINVAL
when an overflow is detected. The SYSCTL_KERN_TO_USER_INT_CONV uses
READ_ONCE, casts to unsigned long, then executes the k_ptr_op before
assigning the value to the user space buffer.
The overflow check is always done against MAX_INT after applying
{k,u}_ptr_op. This approach avoids rounding or precision errors that
might occur when using the inverse operations.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
