| Age | Commit message (Collapse) | Author |
|---|
|
__blkdev_issue_discard() always returns 0, making the error assignment
in __submit_discard_cmd() dead code.
Initialize err to 0 and remove the error assignment from the
__blkdev_issue_discard() call to err. Move fault injection code into
already present if branch where err is set to -EIO.
This preserves the fault injection behavior while removing dead error
handling.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch optimizes the tracepoint by replacing these hardcoded strings
with a new enumeration f2fs_cp_phase.
1.Defines enum f2fs_cp_phase with values for each checkpoint phase.
2.Updates trace_f2fs_write_checkpoint to accept a u16 phase argument
instead of a string pointer.
3.Uses __print_symbolic in TP_printk to convert the enum values
back to their corresponding strings for human-readable trace output.
This change reduces the storage overhead for each trace event
by replacing a variable-length string with a 2-byte integer,
while maintaining the same readable output in ftrace.
Signed-off-by: YH Lin <yhli@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
w/ LFS mode, in get_left_section_blocks(), we should not account the
blocks which were used before and now are invalided, otherwise those
blocks will be counted as freed one in has_curseg_enough_space(), result
in missing to trigger GC in time.
Cc: stable@kernel.org
Fixes: 249ad438e1d9 ("f2fs: add a method for calculating the remaining blocks in the current segment in LFS mode.")
Fixes: bf34c93d2645 ("f2fs: check curseg space before foreground GC")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
cat /sys/kernel/debug/f2fs/status
Main area: 17 segs, 17 secs 17 zones
TYPE blkoff segno secno zoneno dirty_seg full_seg valid_blk
- COLD data: 0 4 4 4 0 0 0
- WARM data: 0 7 7 7 0 0 0
- HOT data: 1 5 5 5 2 0 512
- Dir dnode: 3 0 0 0 1 0 2
- File dnode: 0 1 1 1 0 0 0
- Indir nodes: 0 2 2 2 0 0 0
- Pinned file: 0 -1 -1 -1
- ATGC data: 0 -1 -1 -1
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Sphinx's LaTeX builder fails when converting the nested ASCII tables in
f2fs.rst, producing the following error:
"Markup is unsupported in LaTeX: longtable does not support nesting a table."
Wrap the affected ASCII tables in literal code blocks to force Sphinx to
render them verbatim. This prevents nested longtables and fixes the PDF
build failure on Sphinx 8.2.x.
Acked-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Masaharu Noguchi <nogunix@gmail.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
opt field in structure f2fs_mount_info and opt_mask field in structure
f2fs_fs_context is 32-bits variable, now we're running out of available
bits in them, let's expand them to 64-bits for better scalability.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch changes default schedule timeout value from 20ms to 1ms,
in order to give caller more chances to check whether IO or non-IO
congestion condition has already been mitigable.
In addition, default interval of periodical discard submission is
kept to 20ms.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In f2fs retry logic, we will call f2fs_io_schedule_timeout() to sleep as
uninterruptible state (waiting for IO) for a while, however, in several
paths below, we are not blocked by IO:
- f2fs_write_single_data_page() return -EAGAIN due to racing on cp_rwsem.
- f2fs_flush_device_cache() failed to submit preflush command.
- __issue_discard_cmd_range() sleeps periodically in between two in batch
discard submissions.
So, in order to reveal state of task more accurate, let's introduce
f2fs_schedule_timeout() and call it in above paths in where we are waiting
for non-IO reasons.
Then we can get real reason of uninterruptible sleep for a thread in
tracepoint, perfetto, etc.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
memalloc_retry_wait() is recommended in memory allocation retry logic,
use it as much as possible.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds a sysfs entry showing the max zones that F2FS can write
concurrently.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The usage of unusable_blocks_per_sec is already wrapped by
CONFIG_BLK_DEV_ZONED, except for its declaration and the definitions of
CAP_BLKS_PER_SEC and CAP_SEGS_PER_SEC. This patch ensures that all code
related to unusable_blocks_per_sec is properly wrapped under the
CONFIG_BLK_DEV_ZONED option.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In f2fs_recover_fsync_data(),use LIST_HEAD() to declare and
initialize the list_head in one step instead of using
INIT_LIST_HEAD() separately.
No functional change.
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The recent increase in the number of Segment Summary Area (SSA) entries
from 512 to 2048 was an unintentional change in logic of 16kb block
support. This commit corrects the issue.
To better utilize the space available from the erroneous 2048-entry
calculation, we are implementing a solution to share the currently
unused SSA space with neighboring segments. This enhances overall
SSA utilization without impacting the established 8MB segment size.
Fixes: d7e9a9037de2 ("f2fs: Support Block Size == Page Size")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
mkfs.f2fs -f /dev/vdd
mount /dev/vdd /mnt/f2fs
touch /mnt/f2fs/foo
sync # avoid CP_UMOUNT_FLAG in last f2fs_checkpoint.ckpt_flags
touch /mnt/f2fs/bar
f2fs_io fsync /mnt/f2fs/bar
f2fs_io shutdown 2 /mnt/f2fs
umount /mnt/f2fs
blockdev --setro /dev/vdd
mount /dev/vdd /mnt/f2fs
mount: /mnt/f2fs: WARNING: source write-protected, mounted read-only.
For the case if we create and fsync a new inode before sudden power-cut,
without norecovery or disable_roll_forward mount option, the following
mount will succeed w/o recovering last fsynced inode.
The problem here is that we only check inode_list list after
find_fsync_dnodes() in f2fs_recover_fsync_data() to find out whether
there is recoverable data in the iamge, but there is a missed case, if
last fsynced inode is not existing in last checkpoint, then, we will
fail to get its inode due to nat of inode node is not existing in last
checkpoint, so the inode won't be linked in inode_list.
Let's detect such case in dyrun mode to fix this issue.
After this change, mount will fail as expected below:
mount: /mnt/f2fs: cannot mount /dev/vdd read-only.
dmesg(1) may have more information after failed mount system call.
demsg:
F2FS-fs (vdd): Need to recover fsync data, but write access unavailable, please try mount w/ disable_roll_forward or norecovery
Cc: stable@kernel.org
Fixes: 6781eabba1bd ("f2fs: give -EINVAL for norecovery and rw mount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
With below scripts, it will trigger panic in f2fs:
mkfs.f2fs -f /dev/vdd
mount /dev/vdd /mnt/f2fs
touch /mnt/f2fs/foo
sync
echo 111 >> /mnt/f2fs/foo
f2fs_io fsync /mnt/f2fs/foo
f2fs_io shutdown 2 /mnt/f2fs
umount /mnt/f2fs
mount -o ro,norecovery /dev/vdd /mnt/f2fs
or
mount -o ro,disable_roll_forward /dev/vdd /mnt/f2fs
F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 0
F2FS-fs (vdd): Mounted with checkpoint version = 7f5c361f
F2FS-fs (vdd): Stopped filesystem due to reason: 0
F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 1
Filesystem f2fs get_tree() didn't set fc->root, returned 1
------------[ cut here ]------------
kernel BUG at fs/super.c:1761!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 722 Comm: mount Not tainted 6.18.0-rc2+ #721 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:vfs_get_tree.cold+0x18/0x1a
Call Trace:
<TASK>
fc_mount+0x13/0xa0
path_mount+0x34e/0xc50
__x64_sys_mount+0x121/0x150
do_syscall_64+0x84/0x800
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fa6cc126cfe
The root cause is we missed to handle error number returned from
f2fs_recover_fsync_data() when mounting image w/ ro,norecovery or
ro,disable_roll_forward mount option, result in returning a positive
error number to vfs_get_tree(), fix it.
Cc: stable@kernel.org
Fixes: 6781eabba1bd ("f2fs: give -EINVAL for norecovery and rw mount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This adds a tracepoint in the fadvise call path.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The age extent cache uses last_blocks (derived from
allocated_data_blocks) to determine data age. However, there's a
conflict between the deletion
marker (last_blocks=0) and legitimate last_blocks=0 cases when
allocated_data_blocks overflows to 0 after reaching ULLONG_MAX.
In this case, valid extents are incorrectly skipped due to the
"if (!tei->last_blocks)" check in __update_extent_tree_range().
This patch fixes the issue by:
1. Reserving ULLONG_MAX as an invalid/deletion marker
2. Limiting allocated_data_blocks to range [0, ULLONG_MAX-1]
3. Using F2FS_EXTENT_AGE_INVALID for deletion scenarios
4. Adjusting overflow age calculation from ULLONG_MAX to (ULLONG_MAX-1)
Reproducer (using a patched kernel with allocated_data_blocks
initialized to ULLONG_MAX - 3 for quick testing):
Step 1: Mount and check initial state
# dd if=/dev/zero of=/tmp/test.img bs=1M count=100
# mkfs.f2fs -f /tmp/test.img
# mkdir -p /mnt/f2fs_test
# mount -t f2fs -o loop,age_extent_cache /tmp/test.img /mnt/f2fs_test
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551612 # ULLONG_MAX - 3
Inner Struct Count: tree: 1(0), node: 0
Step 2: Create files and write data to trigger overflow
# touch /mnt/f2fs_test/{1,2,3,4}.txt; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551613 # ULLONG_MAX - 2
Inner Struct Count: tree: 5(0), node: 1
# dd if=/dev/urandom of=/mnt/f2fs_test/1.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551614 # ULLONG_MAX - 1
Inner Struct Count: tree: 5(0), node: 2
# dd if=/dev/urandom of=/mnt/f2fs_test/2.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551615 # ULLONG_MAX
Inner Struct Count: tree: 5(0), node: 3
# dd if=/dev/urandom of=/mnt/f2fs_test/3.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 0 # Counter overflowed!
Inner Struct Count: tree: 5(0), node: 4
Step 3: Trigger the bug - next write should create node but gets skipped
# dd if=/dev/urandom of=/mnt/f2fs_test/4.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 1
Inner Struct Count: tree: 5(0), node: 4
Expected: node: 5 (new extent node for 4.txt)
Actual: node: 4 (extent insertion was incorrectly skipped due to
last_blocks = allocated_data_blocks = 0 in __get_new_block_age)
After this fix, the extent node is correctly inserted and node count
becomes 5 as expected.
Fixes: 71644dff4811 ("f2fs: add block_age-based extent cache")
Cc: stable@kernel.org
Signed-off-by: Xiaole He <hexiaole1994@126.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Add check for inode->i_nlink == 1 for directories during unlink,
as their value is decremented twice, which can trigger a warning in
drop_nlink. In such case mark the filesystem as corrupted and return
from the function call with the relevant failure return value.
Additionally add the check for i_nlink == 1 in
sanity_check_inode in order to detect on-disk corruption early.
Reported-by: syzbot+c07d47c7bc68f47b9083@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c07d47c7bc68f47b9083
Tested-by: syzbot+c07d47c7bc68f47b9083@syzkaller.appspotmail.com
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Rename "fail" label to "out" as it's used as a default
exit path out of f2fs_unlink as well as error path.
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When F2FS uses multiple block devices, each device may have a
different discard granularity. The minimum trim granularity must be
at least the maximum discard granularity of all devices, excluding
zoned devices. Use max_t instead of the max() macro to compute the
maximum value.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The one_time_gc field in struct victim_sel_policy is conditionally
initialized but unconditionally read, leading to undefined behavior
that triggers UBSAN warnings.
In f2fs_get_victim() at fs/f2fs/gc.c:774, the victim_sel_policy
structure is declared without initialization:
struct victim_sel_policy p;
The field p.one_time_gc is only assigned when the 'one_time' parameter
is true (line 789):
if (one_time) {
p.one_time_gc = one_time;
...
}
However, this field is unconditionally read in subsequent get_gc_cost()
at line 395:
if (p->one_time_gc && (valid_thresh_ratio < 100) && ...)
When one_time is false, p.one_time_gc contains uninitialized stack
memory. Hence p.one_time_gc is an invalid bool value.
UBSAN detects this invalid bool value:
UBSAN: invalid-load in fs/f2fs/gc.c:395:7
load of value 77 is not a valid value for type '_Bool'
CPU: 3 UID: 0 PID: 1297 Comm: f2fs_gc-252:16 Not tainted 6.18.0-rc3
#5 PREEMPT(voluntary)
Hardware name: OpenStack Foundation OpenStack Nova,
BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x70/0x90
dump_stack+0x14/0x20
__ubsan_handle_load_invalid_value+0xb3/0xf0
? dl_server_update+0x2e/0x40
? update_curr+0x147/0x170
f2fs_get_victim.cold+0x66/0x134 [f2fs]
? sched_balance_newidle+0x2ca/0x470
? finish_task_switch.isra.0+0x8d/0x2a0
f2fs_gc+0x2ba/0x8e0 [f2fs]
? _raw_spin_unlock_irqrestore+0x12/0x40
? __timer_delete_sync+0x80/0xe0
? timer_delete_sync+0x14/0x20
? schedule_timeout+0x82/0x100
gc_thread_func+0x38b/0x860 [f2fs]
? gc_thread_func+0x38b/0x860 [f2fs]
? __pfx_autoremove_wake_function+0x10/0x10
kthread+0x10b/0x220
? __pfx_gc_thread_func+0x10/0x10 [f2fs]
? _raw_spin_unlock_irq+0x12/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork+0x11a/0x160
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
This issue is reliably reproducible with the following steps on a
100GB SSD /dev/vdb:
mkfs.f2fs -f /dev/vdb
mount /dev/vdb /mnt/f2fs_test
fio --name=gc --directory=/mnt/f2fs_test --rw=randwrite \
--bs=4k --size=8G --numjobs=12 --fsync=4 --runtime=10 \
--time_based
echo 1 > /sys/fs/f2fs/vdb/gc_urgent
The uninitialized value causes incorrect GC victim selection, leading
to unpredictable garbage collection behavior.
Fix by zero-initializing the entire victim_sel_policy structure to
ensure all fields have defined values.
Fixes: e791d00bd06c ("f2fs: add valid block ratio not to do excessive GC for one time GC")
Cc: stable@kernel.org
Signed-off-by: Xiaole He <hexiaole1994@126.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
It recommends to use i_size_{read,write}() to access and update i_size,
otherwise, we may get wrong tearing value due to high 32-bits value
and low 32-bits value of i_size field are not updated atomically in
32-bits archicture machine.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Xfstests generic/335, generic/336 sometimes crash with the following message:
F2FS-fs (dm-0): detect filesystem reference count leak during umount, type: 9, count: 1
------------[ cut here ]------------
kernel BUG at fs/f2fs/super.c:1939!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 609351 Comm: umount Tainted: G W 6.17.0-rc5-xfstests-g9dd1835ecda5 #1 PREEMPT(none)
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:f2fs_put_super+0x3b3/0x3c0
Call Trace:
<TASK>
generic_shutdown_super+0x7e/0x190
kill_block_super+0x1a/0x40
kill_f2fs_super+0x9d/0x190
deactivate_locked_super+0x30/0xb0
cleanup_mnt+0xba/0x150
task_work_run+0x5c/0xa0
exit_to_user_mode_loop+0xb7/0xc0
do_syscall_64+0x1ae/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]---
It appears that sometimes it is possible that f2fs_put_super() is called before
all node page reads are completed.
Adding a call to f2fs_wait_on_all_pages() for F2FS_RD_NODE fixes the problem.
Cc: stable@kernel.org
Fixes: 20872584b8c0b ("f2fs: fix to drop all dirty meta/node pages during umount()")
Signed-off-by: Jan Prusakowski <jprusakowski@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If there are too many background IOs during f2fs_enable_checkpoint(),
sync_inodes_sb() may be blocked for long time due to it will loop to
write dirty datas which are generated by in parallel write()
continuously.
Let's change as below to resolve this issue:
- hold cp_enable_rwsem write lock to block any cache/dio write
- decrease DEF_ENABLE_INTERVAL from 16 to 5
In addition, dump more logs during f2fs_enable_checkpoint().
Testcase:
1. fill data into filesystem until 90% usage.
2. mount -o remount,checkpoint=disable:10% /data
3. fio --rw=randwrite --bs=4kb --size=1GB --numjobs=10 \
--iodepth=64 --ioengine=psync --time_based --runtime=600 \
--directory=/data/fio_dir/ &
4. mount -o remount,checkpoint=enable /data
Before:
F2FS-fs (dm-51): f2fs_enable_checkpoint() finishes, writeback:7232, sync:39793, cp:457
After:
F2FS-fs (dm-51): f2fs_enable_checkpoint end, writeback:5032, lock:0, sync_inode:5552, sync_fs:84
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In order to let userspace detect such error rather than suffering
silent failure.
Fixes: 4354994f097d ("f2fs: checkpoint disabling")
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Change the type of the unlock parameter of f2fs_put_page to bool.
All callers should consistently pass true or false. No logical change.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
F2FS can mount filesystems with corrupted directory depth values that
get runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUT
operations are performed on such directories, f2fs_rename performs
directory modifications (updating target entry and deleting source
entry) before attempting to add the whiteout entry via f2fs_add_link.
If f2fs_add_link fails due to the corrupted directory structure, the
function returns an error to VFS, but the partial directory
modifications have already been committed to disk. VFS assumes the
entire rename operation failed and does not update the dentry cache,
leaving stale mappings.
In the error path, VFS does not call d_move() to update the dentry
cache. This results in new_dentry still pointing to the old inode
(new_inode) which has already had its i_nlink decremented to zero.
The stale cache causes subsequent operations to incorrectly reference
the freed inode.
This causes subsequent operations to use cached dentry information that
no longer matches the on-disk state. When a second rename targets the
same entry, VFS attempts to decrement i_nlink on the stale inode, which
may already have i_nlink=0, triggering a WARNING in drop_nlink().
Example sequence:
1. First rename (RENAME_WHITEOUT): file2 → file1
- f2fs updates file1 entry on disk (points to inode 8)
- f2fs deletes file2 entry on disk
- f2fs_add_link(whiteout) fails (corrupted directory)
- Returns error to VFS
- VFS does not call d_move() due to error
- VFS cache still has: file1 → inode 7 (stale!)
- inode 7 has i_nlink=0 (already decremented)
2. Second rename: file3 → file1
- VFS uses stale cache: file1 → inode 7
- Tries to drop_nlink on inode 7 (i_nlink already 0)
- WARNING in drop_nlink()
Fix this by explicitly invalidating old_dentry and new_dentry when
f2fs_add_link fails during whiteout creation. This forces VFS to
refresh from disk on subsequent operations, ensuring cache consistency
even when the rename partially succeeds.
Reproducer:
1. Mount F2FS image with corrupted i_current_depth
2. renameat2(file2, file1, RENAME_WHITEOUT)
3. renameat2(file3, file1, 0)
4. System triggers WARNING in drop_nlink()
Fixes: 7e01e7ad746b ("f2fs: support RENAME_WHITEOUT")
Reported-by: syzbot+632cf32276a9a564188d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=632cf32276a9a564188d
Suggested-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/all/20251022233349.102728-1-kartikey406@gmail.com/ [v1]
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Hong Yun reported in mailing list:
loop7: detected capacity change from 0 to 131072
------------[ cut here ]------------
kmem_cache of name 'f2fs_xattr_entry-7:7' already exists
WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 kmem_cache_sanity_check mm/slab_common.c:109 [inline]
WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 __kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307
CPU: 0 UID: 0 PID: 24426 Comm: syz.7.1370 Not tainted 6.17.0-rc4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:kmem_cache_sanity_check mm/slab_common.c:109 [inline]
RIP: 0010:__kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307
Call Trace:
__kmem_cache_create include/linux/slab.h:353 [inline]
f2fs_kmem_cache_create fs/f2fs/f2fs.h:2943 [inline]
f2fs_init_xattr_caches+0xa5/0xe0 fs/f2fs/xattr.c:843
f2fs_fill_super+0x1645/0x2620 fs/f2fs/super.c:4918
get_tree_bdev_flags+0x1fb/0x260 fs/super.c:1692
vfs_get_tree+0x43/0x140 fs/super.c:1815
do_new_mount+0x201/0x550 fs/namespace.c:3808
do_mount fs/namespace.c:4136 [inline]
__do_sys_mount fs/namespace.c:4347 [inline]
__se_sys_mount+0x298/0x2f0 fs/namespace.c:4324
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x8e/0x3a0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The bug can be reproduced w/ below scripts:
- mount /dev/vdb /mnt1
- mount /dev/vdc /mnt2
- umount /mnt1
- mounnt /dev/vdb /mnt1
The reason is if we created two slab caches, named f2fs_xattr_entry-7:3
and f2fs_xattr_entry-7:7, and they have the same slab size. Actually,
slab system will only create one slab cache core structure which has
slab name of "f2fs_xattr_entry-7:3", and two slab caches share the same
structure and cache address.
So, if we destroy f2fs_xattr_entry-7:3 cache w/ cache address, it will
decrease reference count of slab cache, rather than release slab cache
entirely, since there is one more user has referenced the cache.
Then, if we try to create slab cache w/ name "f2fs_xattr_entry-7:3" again,
slab system will find that there is existed cache which has the same name
and trigger the warning.
Let's changes to use global inline_xattr_slab instead of per-sb slab cache
for fixing.
Fixes: a999150f4fe3 ("f2fs: use kmem_cache pool during inline xattr lookups")
Cc: stable@kernel.org
Reported-by: Hong Yun <yhong@link.cuhk.edu.hk>
Tested-by: Hong Yun <yhong@link.cuhk.edu.hk>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Bai, Shuangpeng <sjb7183@psu.edu> reported a bug as below:
Oops: divide error: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 11441 Comm: syz.0.46 Not tainted 6.17.0 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:f2fs_all_cluster_page_ready+0x106/0x550 fs/f2fs/compress.c:857
Call Trace:
<TASK>
f2fs_write_cache_pages fs/f2fs/data.c:3078 [inline]
__f2fs_write_data_pages fs/f2fs/data.c:3290 [inline]
f2fs_write_data_pages+0x1c19/0x3600 fs/f2fs/data.c:3317
do_writepages+0x38e/0x640 mm/page-writeback.c:2634
filemap_fdatawrite_wbc mm/filemap.c:386 [inline]
__filemap_fdatawrite_range mm/filemap.c:419 [inline]
file_write_and_wait_range+0x2ba/0x3e0 mm/filemap.c:794
f2fs_do_sync_file+0x6e6/0x1b00 fs/f2fs/file.c:294
generic_write_sync include/linux/fs.h:3043 [inline]
f2fs_file_write_iter+0x76e/0x2700 fs/f2fs/file.c:5259
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x7e9/0xe00 fs/read_write.c:686
ksys_write+0x19d/0x2d0 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf7/0x470 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The bug was triggered w/ below race condition:
fsync setattr ioctl
- f2fs_do_sync_file
- file_write_and_wait_range
- f2fs_write_cache_pages
: inode is non-compressed
: cc.cluster_size =
F2FS_I(inode)->i_cluster_size = 0
- tag_pages_for_writeback
- f2fs_setattr
- truncate_setsize
- f2fs_truncate
- f2fs_fileattr_set
- f2fs_setflags_common
- set_compress_context
: F2FS_I(inode)->i_cluster_size = 4
: set_inode_flag(inode, FI_COMPRESSED_FILE)
- f2fs_compressed_file
: return true
- f2fs_all_cluster_page_ready
: "pgidx % cc->cluster_size" trigger dividing 0 issue
Let's change as below to fix this issue:
- introduce a new atomic type variable .writeback in structure f2fs_inode_info
to track the number of threads which calling f2fs_write_cache_pages().
- use .i_sem lock to protect .writeback update.
- check .writeback before update compression context in f2fs_setflags_common()
to avoid race w/ ->writepages.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Cc: stable@kernel.org
Reported-by: Bai, Shuangpeng <sjb7183@psu.edu>
Tested-by: Bai, Shuangpeng <sjb7183@psu.edu>
Closes: https://lore.kernel.org/lkml/44D8F7B3-68AD-425F-9915-65D27591F93F@psu.edu
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As syzbot reported:
F2FS-fs (loop0): __update_extent_tree_range: extent len is zero, type: 0, extent [0, 0, 0], age [0, 0]
------------[ cut here ]------------
kernel BUG at fs/f2fs/extent_cache.c:678!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:__update_extent_tree_range+0x13bc/0x1500 fs/f2fs/extent_cache.c:678
Call Trace:
<TASK>
f2fs_update_read_extent_cache_range+0x192/0x3e0 fs/f2fs/extent_cache.c:1085
f2fs_do_zero_range fs/f2fs/file.c:1657 [inline]
f2fs_zero_range+0x10c1/0x1580 fs/f2fs/file.c:1737
f2fs_fallocate+0x583/0x990 fs/f2fs/file.c:2030
vfs_fallocate+0x669/0x7e0 fs/open.c:342
ioctl_preallocate fs/ioctl.c:289 [inline]
file_ioctl+0x611/0x780 fs/ioctl.c:-1
do_vfs_ioctl+0xb33/0x1430 fs/ioctl.c:576
__do_sys_ioctl fs/ioctl.c:595 [inline]
__se_sys_ioctl+0x82/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f07bc58eec9
In error path of f2fs_zero_range(), it may add a zero-sized extent
into extent cache, it should be avoided.
Fixes: 6e9619499f53 ("f2fs: support in batch fzero in dnode page")
Cc: stable@kernel.org
Reported-by: syzbot+24124df3170c3638b35f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/68e5d698.050a0220.256323.0032.GAE@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Jiaming Zhang and syzbot reported, there is potential deadlock in
f2fs as below:
Chain exists of:
&sbi->cp_rwsem --> fs_reclaim --> sb_internal#2
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(sb_internal#2);
lock(fs_reclaim);
lock(sb_internal#2);
rlock(&sbi->cp_rwsem);
*** DEADLOCK ***
3 locks held by kswapd0/73:
#0: ffffffff8e247a40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat mm/vmscan.c:7015 [inline]
#0: ffffffff8e247a40 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0x951/0x2800 mm/vmscan.c:7389
#1: ffff8880118400e0 (&type->s_umount_key#50){.+.+}-{4:4}, at: super_trylock_shared fs/super.c:562 [inline]
#1: ffff8880118400e0 (&type->s_umount_key#50){.+.+}-{4:4}, at: super_cache_scan+0x91/0x4b0 fs/super.c:197
#2: ffff888011840610 (sb_internal#2){.+.+}-{0:0}, at: f2fs_evict_inode+0x8d9/0x1b60 fs/f2fs/inode.c:890
stack backtrace:
CPU: 0 UID: 0 PID: 73 Comm: kswapd0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_circular_bug+0x2ee/0x310 kernel/locking/lockdep.c:2043
check_noncircular+0x134/0x160 kernel/locking/lockdep.c:2175
check_prev_add kernel/locking/lockdep.c:3165 [inline]
check_prevs_add kernel/locking/lockdep.c:3284 [inline]
validate_chain+0xb9b/0x2140 kernel/locking/lockdep.c:3908
__lock_acquire+0xab9/0xd20 kernel/locking/lockdep.c:5237
lock_acquire+0x120/0x360 kernel/locking/lockdep.c:5868
down_read+0x46/0x2e0 kernel/locking/rwsem.c:1537
f2fs_down_read fs/f2fs/f2fs.h:2278 [inline]
f2fs_lock_op fs/f2fs/f2fs.h:2357 [inline]
f2fs_do_truncate_blocks+0x21c/0x10c0 fs/f2fs/file.c:791
f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:867
f2fs_truncate+0x489/0x7c0 fs/f2fs/file.c:925
f2fs_evict_inode+0x9f2/0x1b60 fs/f2fs/inode.c:897
evict+0x504/0x9c0 fs/inode.c:810
f2fs_evict_inode+0x1dc/0x1b60 fs/f2fs/inode.c:853
evict+0x504/0x9c0 fs/inode.c:810
dispose_list fs/inode.c:852 [inline]
prune_icache_sb+0x21b/0x2c0 fs/inode.c:1000
super_cache_scan+0x39b/0x4b0 fs/super.c:224
do_shrink_slab+0x6ef/0x1110 mm/shrinker.c:437
shrink_slab_memcg mm/shrinker.c:550 [inline]
shrink_slab+0x7ef/0x10d0 mm/shrinker.c:628
shrink_one+0x28a/0x7c0 mm/vmscan.c:4955
shrink_many mm/vmscan.c:5016 [inline]
lru_gen_shrink_node mm/vmscan.c:5094 [inline]
shrink_node+0x315d/0x3780 mm/vmscan.c:6081
kswapd_shrink_node mm/vmscan.c:6941 [inline]
balance_pgdat mm/vmscan.c:7124 [inline]
kswapd+0x147c/0x2800 mm/vmscan.c:7389
kthread+0x70e/0x8a0 kernel/kthread.c:463
ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
The root cause is deadlock among four locks as below:
kswapd
- fs_reclaim --- Lock A
- shrink_one
- evict
- f2fs_evict_inode
- sb_start_intwrite --- Lock B
- iput
- evict
- f2fs_evict_inode
- sb_start_intwrite --- Lock B
- f2fs_truncate
- f2fs_truncate_blocks
- f2fs_do_truncate_blocks
- f2fs_lock_op --- Lock C
ioctl
- f2fs_ioc_commit_atomic_write
- f2fs_lock_op --- Lock C
- __f2fs_commit_atomic_write
- __replace_atomic_write_block
- f2fs_get_dnode_of_data
- __get_node_folio
- f2fs_check_nid_range
- f2fs_handle_error
- f2fs_record_errors
- f2fs_down_write --- Lock D
open
- do_open
- do_truncate
- security_inode_need_killpriv
- f2fs_getxattr
- lookup_all_xattrs
- f2fs_handle_error
- f2fs_record_errors
- f2fs_down_write --- Lock D
- f2fs_commit_super
- read_mapping_folio
- filemap_alloc_folio_noprof
- prepare_alloc_pages
- fs_reclaim_acquire --- Lock A
In order to avoid such deadlock, we need to avoid grabbing sb_lock in
f2fs_handle_error(), so, let's use asynchronous method instead:
- remove f2fs_handle_error() implementation
- rename f2fs_handle_error_async() to f2fs_handle_error()
- spread f2fs_handle_error()
Fixes: 95fa90c9e5a7 ("f2fs: support recording errors into superblock")
Cc: stable@kernel.org
Reported-by: syzbot+14b90e1156b9f6fc1266@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/68eae49b.050a0220.ac43.0001.GAE@google.com
Reported-by: Jiaming Zhang <r772577952@gmail.com>
Closes: https://lore.kernel.org/lkml/CANypQFa-Gy9sD-N35o3PC+FystOWkNuN8pv6S75HLT0ga-Tzgw@mail.gmail.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Use f2fs_filemap_get_folio() instead of __filemap_get_folio() in:
- f2fs_find_data_folio
- f2fs_write_begin
- f2fs_read_merkle_tree_page
So that, we can trigger fault injection in those places.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Let's use f2fs_filemap_get_folio() instead of f2fs_pagecache_get_page() in
ra_data_block() and move_data_block(), then remove f2fs_pagecache_get_page()
since it has no user.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
No logic changes.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In add_bio_entry(), adding a page to newly allocated bio should never fail,
let's use bio_add_folio_nofail() instead of bio_add_page() & unnecessary
error handling for cleanup.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to
test_progs runner (Alexis Lothoré)
- Convert selftests/bpf/test_xsk to test_progs runner (Bastien
Curutchet)
- Replace bpf memory allocator with kmalloc_nolock() in
bpf_local_storage (Amery Hung), and in bpf streams and range tree
(Puranjay Mohan)
- Introduce support for indirect jumps in BPF verifier and x86 JIT
(Anton Protopopov) and arm64 JIT (Puranjay Mohan)
- Remove runqslower bpf tool (Hoyeon Lee)
- Fix corner cases in the verifier to close several syzbot reports
(Eduard Zingerman, KaFai Wan)
- Several improvements in deadlock detection in rqspinlock (Kumar
Kartikeya Dwivedi)
- Implement "jmp" mode for BPF trampoline and corresponding
DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance
from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong)
- Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul
Chaignon)
- Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel
Borkmann)
- Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko)
- Optimize bpf_map_update_elem() for map-in-map types (Ritesh
Oedayrajsingh Varma)
- Introduce overwrite mode for BPF ring buffer (Xu Kuohai)
* tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits)
bpf: optimize bpf_map_update_elem() for map-in-map types
bpf: make kprobe_multi_link_prog_run always_inline
selftests/bpf: do not hardcode target rate in test_tc_edt BPF program
selftests/bpf: remove test_tc_edt.sh
selftests/bpf: integrate test_tc_edt into test_progs
selftests/bpf: rename test_tc_edt.bpf.c section to expose program type
selftests/bpf: Add success stats to rqspinlock stress test
rqspinlock: Precede non-head waiter queueing with AA check
rqspinlock: Disable spinning for trylock fallback
rqspinlock: Use trylock fallback when per-CPU rqnode is busy
rqspinlock: Perform AA checks immediately
rqspinlock: Enclose lock/unlock within lock entry acquisitions
bpf: Remove runqslower tool
selftests/bpf: Remove usage of lsm/file_alloc_security in selftest
bpf: Disable file_alloc_security hook
bpf: check for insn arrays in check_ptr_alignment
bpf: force BPF_F_RDONLY_PROG on insn array creation
bpf: Fix exclusive map memory leak
selftests/bpf: Make CS length configurable for rqspinlock stress test
selftests/bpf: Add lock wait time stats to rqspinlock stress test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- Make filter parameters configurable via Kconfig
- Add description of kunit.enable parameter to documentation
* tag 'linux_kselftest-kunit-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Make filter parameters configurable via Kconfig
Documentation: kunit: add description of kunit.enable parameter
|
|
The error path of copying the old config used the wrong variable in the
error message:
$ mkdir /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad
$ chmod 0 /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good
cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED!
Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744.
failed to copy to config-good.tmp
When it should have shown:
failed to copy /tmp/build//.config to config-good.tmp
Cc: stable@vger.kernel.org
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Fixes: 0f0db065999cf ("ktest: Add standalone config-bisect.pl program")
Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home
Reported-by: "John W. Krahn" <jwkrahn@shaw.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The JH7110 pinctrl driver currently sets a static GPIO base number from
platform data:
sfp->gc.base = info->gc_base;
Static base assignment is deprecated and results in the following warning:
gpio gpiochip0: Static allocation of GPIO base is deprecated,
use dynamic allocation.
Set `sfp->gc.base = -1` to let the GPIO core dynamically allocate
the base number. This removes the warning and aligns the driver
with current GPIO guidelines.
Since the GPIO base is now allocated dynamically, remove `gc_base` field in
`struct jh7110_pinctrl_soc_info` and the associated `JH7110_SYS_GC_BASE`
and `JH7110_AON_GC_BASE` constants as they are no longer used anywhere
in the driver.
Tested on VisionFive 2 (JH7110 SoC).
Signed-off-by: Ali Tariq <alitariq45892@gmail.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
pcs_pinconf_get() and pcs_pinconf_set() declare ret as unsigned int,
but assign it the return values of pcs_get_function() that may return
negative error codes. This causes negative error codes to be
converted to large positive values.
Change ret from unsigned int to int in both functions.
Fixes: 9dddb4df90d1 ("pinctrl: single: support generic pinconf")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- Add basic test for trace_marker_raw file to tracing selftest
- Fix invalid array access in printf dma_map_benchmark selftest
- Add tprobe enable/disable testcase to tracing selftest
- Update fprobe selftest for ftrace based fprobe
* tag 'linux_kselftest-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Update fprobe selftest for ftrace based fprobe
selftests: tracing: Add tprobe enable/disable testcase
selftests/run_kselftest.sh: exit with error if tests fail
selftests/dma: fix invalid array access in printf
selftests/tracing: Add basic test for trace_marker_raw file
|
|
As per the updated WA database, Wa_18041344222 no longer applies to
graphics IP version 30.01. Remove it.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/280ab3e8dce8d7a40540ae634a5432694ac17ab0.1763762330.git.harish.chegondi@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nicolas Schier:
- Enable -fms-extensions, allowing anonymous use of tagged struct or
union in struct/union (tag kbuild-ms-extensions-6.19). An exemplary
conversion patch is added here, too (btrfs).
[ Editor's note: the core of this actually came in early through a
shared branch and a few other trees - Linus ]
- Introduce architecture-specific CC_CAN_LINK and flags for userprogs
- Add new packaging target 'modules-cpio-pkg' for building a initramfs
cpio w/ kmods
- Handle included .c files in gen_compile_commands
- Minor kbuild changes:
- Use objtree for module signing key path, fixing oot kmod signing
- Improve documentation of KBUILD_BUILD_TIMESTAMP
- Reuse KBUILD_USERCFLAGS for UAPI, instead of defining twice
- Rename scripts/Makefile.extrawarn to Makefile.warn
- Drop obsolete types.h check from headers_check.pl
- Remove outdated config leak ignore entries
* tag 'kbuild-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: add target to build a cpio containing modules
initramfs: add gen_init_cpio to hostprogs unconditionally
kbuild: allow architectures to override CC_CAN_LINK
init: deduplicate cc-can-link.sh invocations
kbuild: don't enable CC_CAN_LINK if the dummy program generates warnings
scripts: headers_install.sh: Remove two outdated config leak ignore entries
scripts/clang-tools: Handle included .c files in gen_compile_commands
kbuild: uapi: Drop types.h check from headers_check.pl
kbuild: Rename Makefile.extrawarn to Makefile.warn
MAINTAINERS, .mailmap: Update mail address for Nicolas Schier
kbuild: uapi: reuse KBUILD_USERCFLAGS
kbuild: doc: improve KBUILD_BUILD_TIMESTAMP documentation
kbuild: Use objtree for module signing key path
btrfs: send: make use of -fms-extensions for defining struct fs_path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Add support for 'syn'.
Syn is a parsing library for parsing a stream of Rust tokens into a
syntax tree of Rust source code.
Currently this library is geared toward use in Rust procedural
macros, but contains some APIs that may be useful more generally.
'syn' allows us to greatly simplify writing complex macros such as
'pin-init' (Benno has already prepared the 'syn'-based version). We
will use it in the 'macros' crate too.
'syn' is the most downloaded Rust crate (according to crates.io),
and it is also used by the Rust compiler itself. While the amount
of code is substantial, there should not be many updates needed for
these crates, and even if there are, they should not be too big,
e.g. +7k -3k lines across the 3 crates in the last year.
'syn' requires two smaller dependencies: 'quote' and 'proc-macro2'.
I only modified their code to remove a third dependency
('unicode-ident') and to add the SPDX identifiers. The code can be
easily verified to exactly match upstream with the provided
scripts.
They are all licensed under "Apache-2.0 OR MIT", like the other
vendored 'alloc' crate we had for a while.
Please see the merge commit with the cover letter for more context.
- Allow 'unreachable_pub' and 'clippy::disallowed_names' for
doctests.
Examples (i.e. doctests) may want to do things like show public
items and use names such as 'foo'.
Nevertheless, we still try to keep examples as close to real code
as possible (this is part of why running Clippy on doctests is
important for us, e.g. for safety comments, which userspace Rust
does not support yet but we are stricter).
'kernel' crate:
- Replace our custom 'CStr' type with 'core::ffi::CStr'.
Using the standard library type reduces our custom code footprint,
and we retain needed custom functionality through an extension
trait and a new 'fmt!' macro which replaces the previous 'core'
import.
This started in 6.17 and continued in 6.18, and we finally land the
replacement now. This required quite some stamina from Tamir, who
split the changes in steps to prepare for the flag day change here.
- Replace 'kernel::c_str!' with C string literals.
C string literals were added in Rust 1.77, which produce '&CStr's
(the 'core' one), so now we can write:
c"hi"
instead of:
c_str!("hi")
- Add 'num' module for numerical features.
It includes the 'Integer' trait, implemented for all primitive
integer types.
It also includes the 'Bounded' integer wrapping type: an integer
value that requires only the 'N' least significant bits of the
wrapped type to be encoded:
// An unsigned 8-bit integer, of which only the 4 LSBs are used.
let v = Bounded::<u8, 4>::new::<15>();
assert_eq!(v.get(), 15);
'Bounded' is useful to e.g. enforce guarantees when working with
bitfields that have an arbitrary number of bits.
Values can also be constructed from simple non-constant expressions
or, for more complex ones, validated at runtime.
'Bounded' also comes with comparison and arithmetic operations
(with both their backing type and other 'Bounded's with a
compatible backing type), casts to change the backing type,
extending/shrinking and infallible/fallible conversions from/to
primitives as applicable.
- 'rbtree' module: add immutable cursor ('Cursor').
It enables to use just an immutable tree reference where
appropriate. The existing fully-featured mutable cursor is renamed
to 'CursorMut'.
kallsyms:
- Fix wrong "big" kernel symbol type read from procfs.
'pin-init' crate:
- A couple minor fixes (Benno asked me to pick these patches up for
him this cycle).
Documentation:
- Quick Start guide: add Debian 13 (Trixie).
Debian Stable is now able to build Linux, since Debian 13 (released
2025-08-09) packages Rust 1.85.0, which is recent enough.
We are planning to propose that the minimum supported Rust version
in Linux follows Debian Stable releases, with Debian 13 being the
first one we upgrade to, i.e. Rust 1.85.
MAINTAINERS:
- Add entry for the new 'num' module.
- Remove Alex as Rust maintainer: he hasn't had the time to
contribute for a few years now, so it is a no-op change in
practice.
And a few other cleanups and improvements"
* tag 'rust-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (53 commits)
rust: macros: support `proc-macro2`, `quote` and `syn`
rust: syn: enable support in kbuild
rust: syn: add `README.md`
rust: syn: remove `unicode-ident` dependency
rust: syn: add SPDX License Identifiers
rust: syn: import crate
rust: quote: enable support in kbuild
rust: quote: add `README.md`
rust: quote: add SPDX License Identifiers
rust: quote: import crate
rust: proc-macro2: enable support in kbuild
rust: proc-macro2: add `README.md`
rust: proc-macro2: remove `unicode_ident` dependency
rust: proc-macro2: add SPDX License Identifiers
rust: proc-macro2: import crate
rust: kbuild: support using libraries in `rustc_procmacro`
rust: kbuild: support skipping flags in `rustc_test_library`
rust: kbuild: add proc macro library support
rust: kbuild: simplify `--cfg` handling
rust: kbuild: introduce `core-flags` and `core-skip_flags`
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Support both paths where tracefs is typically mounted in selftests
- Make old_sympos 0 and 1 equal. They both are valid when there is only
one symbol with the given name.
* tag 'livepatching-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: use canonical ftrace path
livepatch: Match old_sympos 0 and 1 in klp_find_func()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Improve recovery from misbehaving BPF schedulers.
When a scheduler puts many tasks with varying affinity restrictions
on a shared DSQ, CPUs scanning through tasks they cannot run can
overwhelm the system, causing lockups.
Bypass mode now uses per-CPU DSQs with a load balancer to avoid this,
and hooks into the hardlockup detector to attempt recovery.
Add scx_cpu0 example scheduler to demonstrate this scenario.
- Add lockless peek operation for DSQs to reduce lock contention for
schedulers that need to query queue state during load balancing.
- Allow scx_bpf_reenqueue_local() to be called from anywhere in
preparation for deprecating cpu_acquire/release() callbacks in favor
of generic BPF hooks.
- Prepare for hierarchical scheduler support: add
scx_bpf_task_set_slice() and scx_bpf_task_set_dsq_vtime() kfuncs,
make scx_bpf_dsq_insert*() return bool, and wrap kfunc args in
structs for future aux__prog parameter.
- Implement cgroup_set_idle() callback to notify BPF schedulers when a
cgroup's idle state changes.
- Fix migration tasks being incorrectly downgraded from
stop_sched_class to rt_sched_class across sched_ext enable/disable.
Applied late as the fix is low risk and the bug subtle but needs
stable backporting.
- Various fixes and cleanups including cgroup exit ordering,
SCX_KICK_WAIT reliability, and backward compatibility improvements.
* tag 'sched_ext-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (44 commits)
sched_ext: Fix incorrect sched_class settings for per-cpu migration tasks
sched_ext: tools: Removing duplicate targets during non-cross compilation
sched_ext: Use kvfree_rcu() to release per-cpu ksyncs object
sched_ext: Pass locked CPU parameter to scx_hardlockup() and add docs
sched_ext: Update comments replacing breather with aborting mechanism
sched_ext: Implement load balancer for bypass mode
sched_ext: Factor out abbreviated dispatch dequeue into dispatch_dequeue_locked()
sched_ext: Factor out scx_dsq_list_node cursor initialization into INIT_DSQ_LIST_CURSOR
sched_ext: Add scx_cpu0 example scheduler
sched_ext: Hook up hardlockup detector
sched_ext: Make handle_lockup() propagate scx_verror() result
sched_ext: Refactor lockup handlers into handle_lockup()
sched_ext: Make scx_exit() and scx_vexit() return bool
sched_ext: Exit dispatch and move operations immediately when aborting
sched_ext: Simplify breather mechanism with scx_aborting flag
sched_ext: Use per-CPU DSQs instead of per-node global DSQs in bypass mode
sched_ext: Refactor do_enqueue_task() local and global DSQ paths
sched_ext: Use shorter slice in bypass mode
sched_ext: Mark racy bitfields to prevent adding fields that can't tolerate races
sched_ext: Minor cleanups to scx_task_iter
...
|
|
Do not reference the loop variable job after the loop has exited.
Instead, save the job from the last iteration of the loop.
Fixes: 00937fe1921a ("drm/xe/vf: Start re-emission from first unsignaled job during VF migration")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202511291102.jnnKP6IB-lkp@intel.com/
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20251203011809.968893-1-matthew.brost@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Defer task cgroup unlink until after the dying task's final context
switch so that controllers see the cgroup properly populated until
the task is truly gone
- cpuset cleanups and simplifications.
Enforce that domain isolated CPUs stay in root or isolated partitions
and fail if isolated+nohz_full would leave no housekeeping CPU. Fix
sched/deadline root domain handling during CPU hot-unplug and race
for tasks in attaching cpusets
- Misc fixes including memory reclaim protection documentation and
selftest KTAP conformance
* tag 'cgroup-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: Treat cpusets in attaching as populated
sched/deadline: Walk up cpuset hierarchy to decide root domain when hot-unplug
cgroup/cpuset: Introduce cpuset_cpus_allowed_locked()
docs: cgroup: No special handling of unpopulated memcgs
docs: cgroup: Note about sibling relative reclaim protection
docs: cgroup: Explain reclaim protection target
selftests/cgroup: conform test to KTAP format output
cpuset: remove need_rebuild_sched_domains
cpuset: remove global remote_children list
cpuset: simplify node setting on error
cgroup: include missing header for struct irq_work
cgroup: Fix sleeping from invalid context warning on PREEMPT_RT
cgroup/cpuset: Globally track isolated_cpus update
cgroup/cpuset: Ensure domain isolated CPUs stay in root or isolated partition
cgroup/cpuset: Move up prstate_housekeeping_conflict() helper
cgroup/cpuset: Fail if isolated and nohz_full don't leave any housekeeping
cgroup/cpuset: Rename update_unbound_workqueue_cpumask() to update_isolation_cpumasks()
cgroup: Defer task cgroup unlink until after the task is done switching out
cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()
cgroup: Rename cgroup lifecycle hooks to cgroup_task_*()
...
|
|
Use tpm_ret_to_err() to transmute TPM return codes in trusted_tpm2.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
