| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- Initialize rzg3s_pcie_msi_irq() MSI status bitmap before use (Claudiu
Beznea)
* tag 'pci-v6.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: rzg3s-host: Initialize MSI status bitmap before use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Support for multiple sections in a BPT stream
- Align DMA frame with BPT frames
- Qualcomm support for v3.1.0 controllers
* tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: handle multi BPT sections
soundwire: pass sdw_bpt_section to cdns BPT helpers
soundwire: introduce BPT section
soundwire: intel_ace2x: add fake frame to BRA read command
soundwire: cadence_master: add fake_size parameter to sdw_cdns_prepare_read_dma_buffer
ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligment
soundwire: cadence: export sdw_cdns_bpt_find_bandwidth
soundwire: cadence_master: set data_per_frame as frame capability
soundwire: only compute BPT stream in sdw_compute_dp0_port_params
soundwire: cadence_master: make frame index trace more readable
soundwire: qcom: adding support for v3.1.0
dt-bindings: soundwire: qcom: Document v3.1.0 version of IP block
soundwire: qcom: prepare for v3.x
soundwire: qcom: deprecate qcom,din/out-ports
dt-bindings: soundwire: qcom: deprecate qcom,din/out-ports
soundwire: qcom: remove unused rd_fifo_depth
of: base: Add of_property_read_u8_index
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
|
|
Chris reported that the recent affinity management changes result in
overwriting the already initialized thread flags.
Use set_bit() to set the affinity bit instead of assigning the bit value to
the flags.
Fixes: 801afdfbfcd9 ("genirq: Fix interrupt threads affinity vs. cpuset isolated partitions")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://patch.msgid.link/87ecp0e4cf.ffs@tglx
Closes: https://lore.kernel.org/all/20251212014848.3509622-1-clm@meta.com
|
|
Allow for runtime modification to page reclamation feature through
debugfs configuration. This parameter will only take effect if the
platform supports the page reclamation feature by default.
v2:
- Minor comment tweaks. (Shuicheng)
- Convert to kstrtobool_from_user. (Michal)
- Only expose page reclaim file if page reclaim flag
initially supported and with that, remove
xe_match_desc usage. (Michal)
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-22-brian3.nguyen@intel.com
|
|
There are additional hardware managed L2$ flushing such as the
transient display. In those scenarios, page reclamation is
unnecessary resulting in redundant cacheline flushes, so skip
over those corresponding ranges.
v2:
- Elaborated on reasoning for page reclamation skip based on
Tejas's discussion. (Matthew A, Tejas)
v3:
- Removed MEDIA_IS_ON due to racy condition resulting in removal of
relevant registers and values. (Matthew A)
- Moved l3 policy access to xe_pat. (Matthew A)
v4:
- Updated comments based on previous change. (Tejas)
- Move back PAT index macros to xe_pat.c.
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-21-brian3.nguyen@intel.com
|
|
Add page reclamation action to tlb inval backend. The page reclamation
action is paired with range tlb invalidations so both are issued at the
same time.
Page reclamation will issue the TLB invalidation with an invalid seqno
and a H2G page reclamation action with the fence's corresponding seqno
and handle the fence accordingly on page reclaim action done handler.
If page reclamation fails, tlb timeout handler will be responsible for
signalling fence and cleaning up.
v2:
- add send_page_reclaim to patch.
- Remove flush_cache and use prl_sa pointer to determine PPC flush
instead of explicit bool. Add NULL as fallback for others. (Matthew B)
v3:
- Add comments for flush_cache with media.
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-20-brian3.nguyen@intel.com
|
|
Use page reclaim list as indicator if page reclaim action is desired and
pass it to tlb inval fence to handle.
Job will need to maintain its own embedded copy to ensure lifetime of
PRL exist until job has run.
v2:
- Use xe variant of WARN_ON (Michal)
v3:
- Add comments for PRL tile handling and flush behavior with media.
(Matthew Brost)
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-19-brian3.nguyen@intel.com
|
|
Page reclamation feature needs the PRL to be suballocated into a
GGTT-mapped BO. On allocation failure, fallback to default tlb
invalidation with full PPC flush.
PRL's BO allocation is managed in separate pool to ensure 4K alignment
for proper GGTT address.
With BO, pass into TLB invalidation backend and modify fence to
accomadate accordingly.
v2:
- Removed page reclaim related variables from TLB fence. (Matthew B)
- Allocate PRL bo size to num_entries. (Matthew B)
- Move PRL bo allocation to tlb_inval run_job. (Matthew B)
v5:
- Use xe_page_reclaim_list_valid. (Matthew B)
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-18-brian3.nguyen@intel.com
|
|
Page reclaim list (PRL) is preparation work for the page reclaim feature.
The PRL is firstly owned by pt_update_ops and all other page reclaim
operations will point back to this PRL. PRL generates its entries during
the unbind page walker, updating the PRL.
This PRL is restricted to a 4K page, so 512 page entries at most.
v2:
- Removed unused function. (Shuicheng)
- Compacted warning checking, update commit message,
spelling, etc. (Shuicheng, Matthew B)
- Fix kernel docs
- Moved PRL max entries overflow handling out from
generate_reclaim_entry to caller (Shuicheng)
- Add xe_page_reclaim_list_init for clarity. (Matthew B)
- Modify xe_guc_page_reclaim_entry to use macros
for greater flexbility. (Matthew B)
- Add fallback for PTE outside of page reclaim supported
4K, 64K, 2M pages (Matthew B)
- Invalidate PRL for early abort page walk.
- Removed page reclaim related variables from tlb fence
(Matthew Brost)
- Remove error handling in *alloc_entries failure. (Matthew B)
v3:
- Fix NULL pointer dereference check.
- Modify reclaim_entry to QW and bitfields accordingly. (Matthew B)
- Add vm_dbg prints for PRL generation and invalidation. (Matthew B)
v4:
- s/GENMASK/GENMASK_ULL && s/BIT/BIT_ULL (CI)
v5:
- Addition of xe_page_reclaim_list_is_new() to avoid continuous
allocation of PRL if consecutive VMAs cause a PRL invalidation.
- Add xe_page_reclaim_list_valid() helpers for clarity. (Matthew B)
- Move xe_page_reclaim_list_entries_put in
xe_page_reclaim_list_invalidate.
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-17-brian3.nguyen@intel.com
|
|
Add page reclamation related changes to GuC interface, handlers, and
senders to support page reclamation.
Currently TLB invalidations will perform an entire PPC flush in order to
prevent stale memory access for noncoherent system memory. Page
reclamation is an extension of the typical TLB invalidation
workflow, allowing disabling of full PPC flush and enable selective PPC
flushing. Selective flushing will be decided by a list of pages whom's
address is passed to GuC at time of action.
Page reclamation interfaces require at least GuC FW ver 70.31.0.
v2:
- Moved send_page_reclaim to first patch usage.
- Add comments explaining shared done handler. (Matthew B)
- Add FW version fallback to disable page reclaim
on older versions. (Matthew B, Shuicheng)
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-16-brian3.nguyen@intel.com
|
|
Starting from Xe3p, HW adds a feature assisting range based page
reclamation. Introduce a bit in device info to indicate whether
device has such capability.
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-15-brian3.nguyen@intel.com
|
|
Allow tlb_invalidation to control when driver wants to flush the
Private Physical Cache (PPC) as a process of the tlb invalidation
process.
Default behavior is still to always flush the PPC but driver now has the
option to disable it.
v2:
- Revise commit/kernel doc descriptions. (Shuicheng)
- Remove unused function. (Shuicheng)
- Remove bool flush_cache parameter from fence,
and various function inputs. (Matthew B)
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-14-brian3.nguyen@intel.com
|
|
Certain TLB invalidation operations send multiple H2G messages per seqno
with only the final H2G containing the valid seqno - the others carry an
invalid seqno. The G2H handler drops these invalid seqno to aovid
prematurely signaling a TLB invalidation fence.
With TLB_INVALIDATION_SEQNO_INVALID used to indicate in progress
multi-step TLB invalidations, reset tdr to ensure that timeout
won't prematurely trigger when G2H actions are still ongoing.
v2: Remove lock from xe_tlb_inval_reset_timeout. (Matthew B)
v3: Squash with dependent patch from Matthew Brost' series.
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-13-brian3.nguyen@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc1:
- Fix stack usage warning in novatek-nt35560.
- Fix s/r, i2c issues in nouveau and update string handling.
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83.
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties().
- Fix devcoredump crash on reading evicted bo's.
- Fix bigendian handling in mgag200.
- Fix probe failure in tilcdc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/6c371dc1-08bf-4a34-895c-9ef348b6061b@linux.intel.com
|
|
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251208020750.4727-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Not that other existing usage of __free() in this context is a corret
exception initialized to NULL, because the actual allocation is branched
in if().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251208020750.4727-3-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Remove the .priv_xfers() callback from the framework after all master
controller drivers have switched to use the new .i3c_xfers() callback.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20251203-i3c_xfer_cleanup_master-v2-2-7dd94d04ee2d@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
During GT reset recovery in do_gt_restart(), xe_uc_start() was called
before xe_reg_sr_apply_mmio() restored engine-specific registers. This
created a race window where the scheduler could run jobs before hardware
state was fully restored.
This caused failures in eudebug tests (xe_exec_sip_eudebug@breakpoint-
waitsip-*) where TD_CTL register (containing TD_CTL_GLOBAL_DEBUG_ENABLE)
wasn't restored before jobs started executing. Breakpoints would fail to
trigger SIP entry because the debug enable bit wasn't set yet.
Fix by moving xe_uc_start() after all MMIO register restoration,
including engine registers and CCS mode configuration, ensuring all
hardware state is fully restored before any jobs can be scheduled.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Jan Maslak <jan.maslak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251210145618.169625-2-jan.maslak@intel.com
|
|
When wbt_enable_default() is moved out of queue freezing in elevator_change(),
it can cause the wbt inflight counter to become negative (-1), leading to hung
tasks in the writeback path. Tasks get stuck in wbt_wait() because the counter
is in an inconsistent state.
The issue occurs because wbt_enable_default() could race with IO submission,
allowing the counter to be decremented before proper initialization. This manifests
as:
rq_wait[0]:
inflight: -1
has_waiters: True
rwb_enabled() checks the state, which can be updated exactly between wbt_wait()
(rq_qos_throttle()) and wbt_track()(rq_qos_track()), then the inflight counter
will become negative.
And results in hung task warnings like:
task:kworker/u24:39 state:D stack:0 pid:14767
Call Trace:
rq_qos_wait+0xb4/0x150
wbt_wait+0xa9/0x100
__rq_qos_throttle+0x24/0x40
blk_mq_submit_bio+0x672/0x7b0
...
Fix this by:
1. Splitting wbt_enable_default() into:
- __wbt_enable_default(): Returns true if wbt_init() should be called
- wbt_enable_default(): Wrapper for existing callers (no init)
- wbt_init_enable_default(): New function that checks and inits WBT
2. Using wbt_init_enable_default() in blk_register_queue() to ensure
proper initialization during queue registration
3. Move wbt_init() out of wbt_enable_default() which is only for enabling
disabled wbt from bfq and iocost, and wbt_init() isn't needed. Then the
original lock warning can be avoided.
4. Removing the ELEVATOR_FLAG_ENABLE_WBT_ON_EXIT flag and its handling
code since it's no longer needed
This ensures WBT is properly initialized before any IO can be submitted,
preventing the counter from going negative.
Cc: Nilay Shroff <nilay@linux.ibm.com>
Cc: Yu Kuai <yukuai@fnnas.com>
Cc: Guangwu Zhang <guazhang@redhat.com>
Fixes: 78c271344b6f ("block: move wbt_enable_default() out of queue freezing from sched ->exit()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ublk selftests cover every data copy mode except user copy. Add
tests for user copy based on the existing test suite:
- generic_14 ("basic recover function verification (user copy)") based
on generic_04 and generic_05
- null_03 ("basic IO test with user copy") based on null_01 and null_02
- loop_06 ("write and verify over user copy") based on loop_01 and
loop_03
- loop_07 ("mkfs & mount & umount with user copy") based on loop_02 and
loop_04
- stripe_05 ("write and verify test on user copy") based on stripe_03
- stripe_06 ("mkfs & mount & umount on user copy") based on stripe_02
and stripe_04
- stress_06 ("run IO and remove device (user copy)") based on stress_01
and stress_03
- stress_07 ("run IO and kill ublk server (user copy)") based on
stress_02 and stress_04
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ublk selftests mock ublk server kublk supports every data copy mode
except user copy. Add support for user copy to kublk, enabled via the
--user_copy (-u) command line argument. On writes, issue pread() calls
to copy the write data into the ublk_io's buffer before dispatching the
write to the target implementation. On reads, issue pwrite() calls to
copy read data from the ublk_io's buffer before committing the request.
Copy in 2 KB chunks to provide some coverage of the offseting logic.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The kublk mock ublk server allows multiple data copy mode arguments to
be passed on the command line (--zero_copy, --get_data, and --auto_zc).
The ublk device will be created with all the requested feature flags,
however kublk will only use one of the modes to interact with request
data (arbitrarily preferring auto_zc over zero_copy over get_data). To
clarify the intent of the test, don't allow multiple data copy modes to
be specified. --zero_copy and --auto_zc are allowed together for
--auto_zc_fallback, which uses both copy modes.
Don't set UBLK_F_USER_COPY for zero_copy, as it's a separate feature.
Fix the test cases in test_stress_05 passing --get_data along with
--zero_copy or --auto_zc.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
stress_04 is missing a wait between blocks of tests, meaning multiple
ublk servers will be running in parallel using the same backing files.
Add a wait after each section to ensure each backing file is in use by a
single ublk server at a time.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
stress_04 is described as "run IO and kill ublk server(zero copy)" but
the --per_io_tasks tests cases don't use zero copy. Plus, one of the
test cases is duplicated. Add --auto_zc to these test cases and
--auto_zc_fallback to one of the duplicated ones. This matches the test
cases in stress_03.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
run_io_and_recover() invokes fio with --size="${size}", but the variable
size doesn't exist. Thus, the argument expands to --size=, which causes
fio to exit immediately with an error without issuing any I/O. Pass the
value for size as the first argument to the function.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ios map populated by seq_io.bt is never read, so remove it.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The last_rw map is initialized with a value of 0 but later assigned the
value args.sector + args.nr_sector, which has type sector_t = u64.
bpftrace complains about the type mismatch between int64 and uint64:
trace/seq_io.bt:18:3-59: ERROR: Type mismatch for @last_rw: trying to assign value of type 'uint64' when map already contains a value of type 'int64'
@last_rw[$dev, str($2)] = (args.sector + args.nr_sector);
Cast the initial value to uint64 so bpftrace will load the program.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The functions ublk_queue_use_zc(), ublk_queue_use_auto_zc(), and
ublk_queue_auto_zc_fallback() were returning int, but performing
bitwise AND on q->flags which is __u64.
When a flag bit is set in the upper 32 bits (beyond INT_MAX), the
result of the bitwise AND operation could overflow when cast to int,
leading to incorrect boolean evaluation.
For example, if UBLKS_Q_AUTO_BUF_REG_FALLBACK is 0x8000000000000000:
- (u64)flags & 0x8000000000000000 = 0x8000000000000000
- Cast to int: undefined behavior / incorrect value
- Used in if(): may evaluate incorrectly
Fix by:
1. Changing return type from int to bool for semantic correctness
2. Using !! to explicitly convert to boolean (0 or 1)
This ensures the functions return proper boolean values regardless
of which bit position the flags occupy in the 64-bit field.
Fixes: c3a6d48f86da ("selftests: ublk: remove ublk queue self-defined flags")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We'll need bio_flagged() earlier in bio.h for later patches, move it
together with all related helpers, and mark the bio_flagged()'s bio
argument as const.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The sched_ext selftests runner runs each test in the same process,
with each test possibly forking multiple times. When the main runner
has not flushed its stdout, the children inherit the buffered output
for previous tests and emit it during exit. This causes log spam.
Make sure stdout/stderr is fully flushed before each test.
Cc: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The firmware sends a response and interrupts the driver before advancing
the mailbox send ring head pointer. As a result, the driver may observe
the response and attempt to send a new request before the firmware has
updated the head pointer. In this window, the send ring still appears
full, causing the driver to incorrectly fail the send operation.
This race can be triggered more easily in a multithreaded environment,
leading to unexpected and spurious "send ring full" failures.
To address this, poll the send ring head pointer for up to 100us before
returning a full-ring condition. This allows the firmware time to update
the head pointer.
Fixes: b87f920b9344 ("accel/amdxdna: Support hardware mailbox")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251211045125.1724604-1-lizhi.hou@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add basic LoongArch32 support
Note: Build infrastructures of LoongArch32 are not enabled yet,
because we need to adjust irqchip drivers and wait for GNU toolchain
be upstream first.
- Select HAVE_ARCH_BITREVERSE in Kconfig
- Fix build and boot for CONFIG_RANDSTRUCT
- Correct the calculation logic of thread_count
- Some bug fixes and other small changes
* tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits)
LoongArch: Adjust default config files for 32BIT/64BIT
LoongArch: Adjust VDSO/VSYSCALL for 32BIT/64BIT
LoongArch: Adjust misc routines for 32BIT/64BIT
LoongArch: Adjust user accessors for 32BIT/64BIT
LoongArch: Adjust system call for 32BIT/64BIT
LoongArch: Adjust module loader for 32BIT/64BIT
LoongArch: Adjust time routines for 32BIT/64BIT
LoongArch: Adjust process management for 32BIT/64BIT
LoongArch: Adjust memory management for 32BIT/64BIT
LoongArch: Adjust boot & setup for 32BIT/64BIT
LoongArch: Adjust common macro definitions for 32BIT/64BIT
LoongArch: Add adaptive CSR accessors for 32BIT/64BIT
LoongArch: Add atomic operations for 32BIT/64BIT
LoongArch: Add new PCI ID for pci_fixup_vgadev()
LoongArch: Add and use some macros for AVEC
LoongArch: Correct the calculation logic of thread_count
LoongArch: Use unsigned long for _end and _text
LoongArch: Use __pmd()/__pte() for swap entry conversions
LoongArch: Fix arch_dup_task_struct() for CONFIG_RANDSTRUCT
LoongArch: Fix build errors for CONFIG_RANDSTRUCT
...
|
|
There are some corner cases where flushing transient
data may take slightly longer than the 150us timeout
we currently allow. Update the driver to use a 300us
timeout instead based on the latest guidance from
the hardware team. An update to the bspec to formally
document this is expected to arrive soon.
Fixes: c01c6066e6fa ("drm/xe/device: implement transient flush")
Signed-off-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/0201b1d6ec64d3651fcbff1ea21026efa915126a.1765487866.git.jagmeet.randhawa@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Enable I2C controller for Crescent Island and while at it, rely on
has_i2c flag instead of manual platform checks.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251128084414.306265-1-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
move_local_task_to_local_dsq() is used when moving a task from a non-local
DSQ to a local DSQ on the same CPU. It directly manipulates the local DSQ
without going through dispatch_enqueue() and was missing the post-enqueue
handling that triggers preemption when SCX_ENQ_PREEMPT is set or the idle
task is running.
The function is used by move_task_between_dsqs() which backs
scx_bpf_dsq_move() and may be called while the CPU is busy.
Add local_dsq_post_enq() call to move_local_task_to_local_dsq(). As the
dispatch path doesn't need post-enqueue handling, add SCX_RQ_IN_BALANCE
early exit to keep consume_dispatch_q() behavior unchanged and avoid
triggering unnecessary resched when scx_bpf_dsq_move() is used from the
dispatch path.
Fixes: 4c30f5ce4f7a ("sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()")
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Factor out local_dsq_post_enq() which performs post-enqueue handling for
local DSQs - triggering resched_curr() if SCX_ENQ_PREEMPT is specified or if
the current CPU is idle. No functional change.
This will be used by the next patch to fix move_local_task_to_local_dsq().
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
If the call to btrfs_delalloc_reserve_metadata() fails we jump to the
'out_noreserve' label and there we never free the extent_changeset
allocated by the previous call to btrfs_check_data_free_space() (if
qgroups are enabled). Fix this by calling extent_changeset_free() under
the 'out_noreserve' label.
Fixes: 6599716de2d6 ("btrfs: fix -ENOSPC mmap write failure on NOCOW files/extents")
Reported-by: syzbot+2f8aa76e6acc9fce6638@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/693a635a.a70a0220.33cd7b.0029.GAE@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In open_seed_devices(), when find_fsid() fails and we're in DEGRADED
mode, a new fs_devices is allocated via alloc_fs_devices() but is never
added to the seed_list before returning. This contrasts with the normal
path where fs_devices is properly added via list_add().
If any error occurs later in read_one_dev() or btrfs_read_chunk_tree(),
the cleanup code iterates seed_list to free seed devices, but this
orphaned fs_devices is never found and never freed, causing a memory
leak. Any devices allocated via add_missing_dev() and attached to this
fs_devices are also leaked.
Fix this by adding the newly allocated fs_devices to seed_list in the
degraded path, consistent with the normal path.
Fixes: 5f37583569442 ("Btrfs: move the missing device to its own fs device list")
Reported-by: syzbot+eadd98df8bceb15d7fed@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=eadd98df8bceb15d7fed
Tested-by: syzbot+eadd98df8bceb15d7fed@syzkaller.appspotmail.com
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add missing drm_gem_object_put() call when drm_gem_object_lookup()
successfully returns an object. This fixes a GEM object reference
leak that can prevent driver modules from unloading when using
prime buffers.
Fixes: 53096728b891 ("drm: Add DRM prime interface to reassign GEM handle")
Cc: <stable@vger.kernel.org> # v6.18+
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20251212134133.475218-1-karol.wachowski@linux.intel.com
|
|
Move the panic handling to the display parent interface, making display
more independent of i915 and xe driver implementations.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/e27eca5424479e8936b786018d0af19a34f839f6.1765474612.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The intel_panic.c implementation is i915 specific, and xe has its
own. Move it to i915 core as i915_panic.c.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/8dc7af0ae1f859d17b0be269a545146c5536d8fc.1765474612.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
"Fixes for some recent regressions as well as some longstanding issues:
- Fix incorrect output from the arm64 NEON implementation of GHASH
- Merge the ksimd scopes in the arm64 XTS code to reduce stack usage
- Roll up the BLAKE2b round loop on 32-bit kernels to greatly reduce
code size and stack usage
- Add missing RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS dependency
- Fix chacha-riscv64-zvkb.S to not use frame pointer for data"
* tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: arm64/ghash - Fix incorrect output from ghash-neon
crypto/arm64: sm4/xts - Merge ksimd scopes to reduce stack bloat
crypto/arm64: aes/xts - Use single ksimd scope to reduce stack bloat
lib/crypto: blake2s: Replace manual unrolling with unrolled_full
lib/crypto: blake2b: Roll up BLAKE2b round loop on 32-bit
lib/crypto: riscv: Depend on RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS
lib/crypto: riscv/chacha: Avoid s0/fp register
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Always initialize DMA state, fixing a potentially nasty issue on the
block side
- btrfs zoned write fix with cached zone reports
- Fix corruption issues in bcache with chained bio's, and further make
it clear that the chained IO handler is simply a marker, it's not
code meant to be executed
- Kill old code dealing with synchronous IO polling in the block layer,
that has been dead for a long time. Only async polling is supported
these days
- Fix a lockdep issue in tag_set management, moving it to RCU
- Fix an issue with ublks bio_vec iteration
- Don't unconditionally enforce blocking issue of ublk control
commands, allow some of them with non-blocking issue as they
do not block
* tag 'block-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
blk-mq-dma: always initialize dma state
blk-mq: delete task running check in blk_hctx_poll()
block: fix cached zone reports on devices with native zone append
block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock
ublk: don't mutate struct bio_vec in iteration
block: prohibit calls to bio_chain_endio
bcache: fix improper use of bi_end_io
ublk: allow non-blocking ctrl cmds in IO_URING_F_NONBLOCK issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Single fix for io_uring headed to stable, fixing an issue introduced
with the min_wait support earlier this year, where SQPOLL didn't get
correctly woken if an event arrived once the event waiting has
finished the min_wait portion.
As we already have regression tests for this added and people
reporting new failures there, let's get this one flushed out
so it can bubble back down to stable as well"
* tag 'io_uring-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix min_wait wakeups for SQPOLL
|
|
Pull smb server fixes from Steve French:
- minor cleanup
- minor update to comment to avoid confusion about fs type
* tag 'v6.19-rc-smb3-server-fixes' of git://git.samba.org/ksmbd:
smb/server: add comment to FileSystemName of FileFsAttributeInformation
smb/server: remove unused nterr.h
smb/server: rename include guard in smb_common.h
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix incorrect error code defines
- Add missing error code definitions
- Add parenthesis around NT_STATUS code defines to fix checkpatch
warnings
- Remove some duplicated protocol definitions, moving to common code
shared by client and server
- Add missing protocol documentation reference (for change notify)
- Correct struct definition (for duplicate_extents_to_file_ex)
* tag 'v6.19-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb/client: remove DeviceType Flags and Device Characteristics definitions
smb: move File Attributes definitions into common/fscc.h
smb: update struct duplicate_extents_to_file_ex
smb: move file_notify_information to common/fscc.h
smb: move SMB2 Notify Action Flags into common/smb2pdu.h
smb: move notify completion filter flags into common/smb2pdu.h
smb/client: add parentheses to NT error code definitions containing bitwise OR operator
smb: add documentation references for smb2 change notify definitions
smb/client: add 4 NT error code definitions
smb/client: fix NT_STATUS_UNABLE_TO_FREE_VM value
smb/client: fix NT_STATUS_DEVICE_DOOR_OPEN value
smb/client: fix NT_STATUS_NO_DATA_DETECTED value
|
|
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- Fix 'nlink' attribute update races when unlinking a file
- Add missing initialisers for the directory verifier in various
places
- Don't regress the NFSv4 open state due to misordered racing replies
- Ensure the NFSv4.x callback server uses the correct transport
connection
- Fix potential use-after-free races when shutting down the NFSv4.x
callback server
- Fix a pNFS layout commit crash
- Assorted fixes to ensure correct propagation of mount options when
the client crosses a filesystem boundary and triggers the VFS
automount code
- More localio fixes
Features and cleanups:
- Add initial support for basic directory delegations
- SunRPC back channel code cleanups"
* tag 'nfs-for-6.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
NFSv4: Handle NFS4ERR_NOTSUPP errors for directory delegations
nfs/localio: remove 61 byte hole from needless ____cacheline_aligned
nfs/localio: remove alignment size checking in nfs_is_local_dio_possible
NFS: Fix up the automount fs_context to use the correct cred
NFS: Fix inheritance of the block sizes when automounting
NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags
Revert "nfs: ignore SB_RDONLY when mounting nfs"
Revert "nfs: clear SB_RDONLY before getting superblock"
Revert "nfs: ignore SB_RDONLY when remounting nfs"
NFS: Add a module option to disable directory delegations
NFS: Shortcut lookup revalidations if we have a directory delegation
NFS: Request a directory delegation during RENAME
NFS: Request a directory delegation on ACCESS, CREATE, and UNLINK
NFS: Add support for sending GDD_GETATTR
NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in pnfs_mark_layout_stateid_invalid
NFSv4.1: protect destroying and nullifying bc_serv structure
SUNRPC: new helper function for stopping backchannel server
SUNRPC: cleanup common code in backchannel request
NFSv4.1: pass transport for callback shutdown
NFSv4: ensure the open stateid seqid doesn't go backwards
...
|
|
To get the full benefit of:
eaa9088d568c ("rseq: Use static branch for syscall exit debug when GENERIC_IRQ_ENTRY=y")
clang needs an __always_inline instead of a plain inline qualifier:
$ for i in {1..10}; do taskset -c 4 perf5 bench syscall basic -l 100000000 | grep "ops/sec"; done
Before After
ops/sec 15424491 15872221 +2.9%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251205100753.4073221-1-edumazet@google.com
|
|
Recent additions to this function cause GCC 14.3.0 to get excited
(W=1) and suggest a missing attribute:
lib/bug.c: In function '__warn_printf':
lib/bug.c:187:25: error: function '__warn_printf' be a candidate for 'gnu_printf' format attribute [-Werror=suggest-attribute=format]
187 | vprintk(fmt, *args);
| ^~~~~~~
Disable the diagnostic locally, following the pattern used for stuff
like va_format().
Fixes: 5c47b7f3d1a9 ("bug: Add BUG_FORMAT_ARGS infrastructure")
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251207-warn-printf-gcc-v1-1-b597d612b94b@google.com
|
