| Age | Commit message (Collapse) | Author |
|---|
|
The mdelay() is called in sleeping context and it should be OK to delay
slightly longer than requested, so switch the code to use fsleep() to
avoid spinning.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The ilitek touchscreen driver uses the non-sleeping gpiod_set_value
function for reset.
Switch to using gpiod_set_value_cansleep() when controlling reset_gpio to
support GPIO providers that may sleep, such as I2C GPIO expanders.
Further switch the mdelay calls on the reset path to fsleep (preferred
in non-atomic contexts).
This fixes noisy complaints in kernel log for gpio providers that do
sleep.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://patch.msgid.link/20251201-imx8mp-hb-iiot-v4-2-53a4cd6c21bf@solid-run.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
ABS_SND_PROFILE used to describe the state of a multi-value sound profile
switch. This will be used for the alert-slider on OnePlus phones or other
phones.
Profile values added as SND_PROFLE_(SILENT|VIBRATE|RING) identifiers
to input-event-codes.h so they can be used from DTS.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Guido Günther <agx@sigxcpu.org> # oneplus,fajita & oneplus,enchilada
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Link: https://patch.msgid.link/20251113-op6-tri-state-v8-1-54073f3874bc@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Like the TWL4030, these PMICs also have a power button feature, so extend
the TWL4030 power button driver. As the irqchip of the TWL6030 mfd driver
does not provide mask, unmask finctions, do it manually.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251106-twl6030-button-v4-2-fdf1aa6e1e9a@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
WQ_UNBOUND on the custom workqueue instead.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-5-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-4-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-3-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-2-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Limit num_syncs to prevent oversized kernel allocations (Shuicheng)
- Disallow 0 OA property values (Ashutosh)
- Disallow 0 EU stall property values (Ashutosh)
Driver Changes:
- Fix kobject leak (Shuicheng)
- Workaround (Vinay)
- Loop variable reference fix (Matt Brost)
- Fix a CONFIG corner-case incorrect number of arguments (Arnd Bergmann)
- Skip reason prefix while emitting array (Raag)
- VF migration fix (Tomasz)
- Fix context in mei interrupt top half (Junxiao)
- Don't include the CCS metadata in the dma-buf sg-table (Thomas)
- VF queueing recovery work fix (Satyanarayana)
- Increase TDF timeout (Jagmeet)
- GT reset registers vs scheduler ordering fix (Jan)
- Adjust long-running workload timeslices (Matt Brost)
- Always set OA_OAGLBCTXCTRL_COUNTER_RESUME (Ashutosh)
- Fix a return value (Dan Carpenter)
- Drop preempt-fences when destroying imported dma-bufs (Thomas)
- Use usleep_range for accurate long-running workload timeslicing (Matthew)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aUSMlQ4iruzm0NQR@fedora
|
|
In irq_domain_set_name() a const pointer is passed in, and then the
const is "lost" when container_of() is called. Fix this up by properly
preserving the const pointer attribute when container_of() is used to
enforce the fact that this pointer should not have anything at it
changed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/2025121731-facing-unhitched-63ae@gregkh
|
|
Sphinx reports htmldocs warnings:
Documentation/gpu/xe/xe_firmware:31: ./drivers/gpu/drm/xe/xe_guc_pc.c:76: ERROR: A level 2 section cannot be used here.
Documentation/gpu/xe/xe_firmware:31: ./drivers/gpu/drm/xe/xe_guc_pc.c:87: ERROR: A level 2 section cannot be used here.
The xe_guc_pc.c documentation is included inside xe_firmware.rst.
The headers in the C file currently use '=' underlines, which conflict with
the parent document's section levels.
Fix this by demoting "Frequency management" and "Render-C States" headers
from '=' to '-' to correctly nest them as subsections.
Build environment: Python 3.13.7 Sphinx 8.2.3 docutils 0.22.3
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Link: https://patch.msgid.link/20251209094836.18589-1-swarajgaikwad1925@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Remove unused index variable and fix for loop.
Fixes: f4e9fc967afd ("drm/xe/xe_survivability: Redesign survivability mode")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/intel-xe/20251210075757.GA1206705@ax162/
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251218105151.586575-5-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
posted_msi_supported() is a misnomer as it actually checks whether it is
enabled or not. Aside of that this does not take CONFIG_X86_POSTED_MSI into
account which is required to actually use it.
Rename it to posted_msi_enabled() and make the return value depend on
CONFIG_X86_POSTED_MSI, which allows the compiler to eliminate the related
dead code and data if disabled:
text data bss dec hex filename
10046 701 3296 14043 36db drivers/iommu/intel/irq_remapping.o
9904 413 3296 13613 352d drivers/iommu/intel/irq_remapping.o
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251125214631.170499997@linutronix.de
|
|
Make code and comments readable and use __this_cpu..() as this is
guaranteed to be invoked with interrupts disabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251125214631.108458942@linutronix.de
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc2:
- Add -EDEADLK handling in drm unit tests.
- Plug DRM_IOCTL_GEM_CHANGE_HANDLE leak.
- Fix regression in sony-td4353-jdi.
- Kconfig fix for visionox-rm69299.
- Do not load amdxdna when running virtualized.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/21861d1b-54bf-4853-9c35-97abe3c5deba@linux.intel.com
|
|
Mark CRI as one that have the CSC NVM device.
Update the writable override flow to take the information from
the scratch register for CRI.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251216111034.3093507-1-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Add Documentation/core-api/tracepoint.rst to TRACING in MAINTAINERS
file
Updates to the tracepoint.rst document should be reviewed by the
tracing maintainers.
- Fix warning triggered by perf attaching to synthetic events
The synthetic events do not add a function to be registered when perf
attaches to them. This causes a warning when perf registers a
synthetic event and passes a NULL pointer to the tracepoint register
function.
Ideally synthetic events should be updated to work with perf, but as
that's a feature and not a bug fix, simply now return -ENODEV when
perf tries to register an event that has a NULL pointer for its
function. This no longer causes a kernel warning and simply causes
the perf code to fail with an error message.
- Fix 32bit overflow in option flag test
The option's flags changed from 32 bits in size to 64 bits in size.
Fix one of the places that shift 1 by the option bit number to to be
1ULL.
- Fix the output of printing the direct jmp functions
The enabled_functions that shows how functions are being attached by
ftrace wasn't updated to accommodate the new direct jmp trampolines
that set the LSB of the pointer, and outputs garbage. Update the
output to handle the direct jmp trampolines.
* tag 'trace-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix address for jmp mode in t_show()
tracing: Fix UBSAN warning in __remove_instance()
tracing: Do not register unsupported perf events
MAINTAINERS: add tracepoint core-api doc files to TRACING
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Fix a performance issue with the scoped_ksimd() macro (new in 6.19)
where it unnecessarily initialized the entire fpsimd state.
- Add a missing gitignore entry for a generated file added in 6.18.
* tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: riscv: Add poly1305-core.S to .gitignore
arm64/simd: Avoid pointless clearing of FP/SIMD buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add a missing PCC check for guaranteed_perf in the ACPI CPPC
library and fix a static local variable access race condition in
acpi_pcc_address_space_setup() (Pengjie Zhang)"
* tag 'acpi-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PCC: Fix race condition by removing static qualifier
ACPI: CPPC: Fix missing PCC check for guaranteed_perf
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the power capping code including one recent
regression and a runtime PM framework regression introduced during the
6.17 development cycle:
- Fix CPU hotplug locking deadlock reported by lockdep after a recent
update of the Intel RAPL power capping driver (Srinivas Pandruvada)
- Fix sscanf() error return value handling in the power capping core
and a race condition in register_control_type() (Sumeet Pawnikar)
- Fix a concurrent bit field update issue in the runtime PM core code
by only updating the bit field in question when runtime PM is
disabled (Rafael Wysocki)"
* tag 'pm-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix possible recursive lock warning
PM: runtime: Do not clear needs_force_resume with enabled runtime PM
powercap: fix sscanf() error return value handling
powercap: fix race condition in register_control_type()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These enable a new hardware feature in the int340x thermal driver and
fix up comments in the thermal core code:
- Set a feature flag in the int340x thermal driver to enable the
power slider interface for Wildcat Lake processors (Srinivas
Pandruvada)
- Fix typo and indentation in comments in the thermal core (Thorsten
Blum)"
* tag 'thermal-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix typo and indentation in comments
thermal: intel: int340x: Enable power slider interface for Wildcat Lake
|
|
Under certain conditions (more prevalent after a suspend/resume cycle),
the touchscreen controller can send the "boot complete" interrupt before
it actually finished booting. In those cases, attempting to read touch
data resuls in a stream of "not ready" messages being read and
interpreted as a touch report. Check that the response is in fact a
touch report and discard it otherwise.
Reported-by: pitust <piotr@stelmaszek.com>
Closes: https://oftc.catirclogs.org/asahi/2025-12-17#34878715;
Fixes: 471a92f8a21a ("Input: apple_z2 - add a driver for Apple Z2 touchscreens")
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://patch.msgid.link/20251218-z2-init-fix-v1-1-48e3aa239caf@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"A few minor fixes, other than the randconfig fix this is only relevant
to test code, not releases:
- Randconfig failure if CONFIG_DMA_SHARED_BUFFER is not set
- Remove gcc warning in kselftest
- Fix a refcount leak on an error path in the selftest support code
- Fix missing overflow checks in the selftest support code"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Check for overflow in IOMMU_TEST_OP_ADD_RESERVED
iommufd/selftest: Do not leak the hwpt if IOMMU_TEST_OP_MD_CHECK_MAP fails
iommufd/selftest: Make it clearer to gcc that the access is not out of bounds
iommufd: Fix building without dmabuf
|
|
In the region invalidation failure path in
mshv_region_interval_invalidate(), the region mutex is not released. Fix
it by releasing the mutex in the failure path.
Signed-off-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Fixes: b9a66cd5ccbb ("mshv: Add support for movable memory regions")
Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Roman Kisel <vdso@mailbox.org>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and CAN.
Current release - regressions:
- netfilter: nf_conncount: fix leaked ct in error paths
- sched: act_mirred: fix loop detection
- sctp: fix potential deadlock in sctp_clone_sock()
- can: fix build dependency
- eth: mlx5e: do not update BQL of old txqs during channel
reconfiguration
Previous releases - regressions:
- sched: ets: always remove class from active list before deleting it
- inet: frags: flush pending skbs in fqdir_pre_exit()
- netfilter: nf_nat: remove bogus direction check
- mptcp:
- schedule rtx timer only after pushing data
- avoid deadlock on fallback while reinjecting
- can: gs_usb: fix error handling
- eth:
- mlx5e:
- avoid unregistering PSP twice
- fix double unregister of HCA_PORTS component
- bnxt_en: fix XDP_TX path
- mlxsw: fix use-after-free when updating multicast route stats
Previous releases - always broken:
- ethtool: avoid overflowing userspace buffer on stats query
- openvswitch: fix middle attribute validation in push_nsh() action
- eth:
- mlx5: fw_tracer, validate format string parameters
- mlxsw: spectrum_router: fix neighbour use-after-free
- ipvlan: ignore PACKET_LOOPBACK in handle_mode_l2()
Misc:
- Jozsef Kadlecsik retires from maintaining netfilter
- tools: ynl: fix build on systems with old kernel headers"
* tag 'net-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: hns3: add VLAN id validation before using
net: hns3: using the num_tqps to check whether tqp_index is out of range when vf get ring info from mbx
net: hns3: using the num_tqps in the vf driver to apply for resources
net: enetc: do not transmit redirected XDP frames when the link is down
selftests/tc-testing: Test case exercising potential mirred redirect deadlock
net/sched: act_mirred: fix loop detection
sctp: Clear inet_opt in sctp_v6_copy_ip_options().
sctp: Fetch inet6_sk() after setting ->pinet6 in sctp_clone_sock().
net/handshake: duplicate handshake cancellations leak socket
net/mlx5e: Don't include PSP in the hard MTU calculations
net/mlx5e: Do not update BQL of old txqs during channel reconfiguration
net/mlx5e: Trigger neighbor resolution for unresolved destinations
net/mlx5e: Use ip6_dst_lookup instead of ipv6_dst_lookup_flow for MAC init
net/mlx5: Serialize firmware reset with devlink
net/mlx5: fw_tracer, Handle escaped percent properly
net/mlx5: fw_tracer, Validate format string parameters
net/mlx5: Drain firmware reset in shutdown callback
net/mlx5: fw reset, clear reset requested on drain_fw_reset
net: dsa: mxl-gsw1xx: manually clear RANEG bit
net: dsa: mxl-gsw1xx: fix .shutdown driver operation
...
|
|
Pull smb client fixes from Steve French:
- important fix for reconnect problem
- minor cleanup
* tag 'v6.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
smb: move some SMB1 definitions into common/smb1pdu.h
smb: align durable reconnect v2 context to 8 byte boundary
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the new __TRAILING_OVERLAP() helper to fix the following warning:
include/hyperv/hvgdk_mini.h:581:25: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
This helper creates a union between a flexible-array member (FAM) and a
set of MEMBERS that would otherwise follow it.
This overlays the trailing MEMBER u64 gva_list[]; onto the FAM
struct hv_tlb_flush_ex::hv_vp_set.bank_contents[], while keeping
the FAM and the start of MEMBER aligned.
The static_assert() ensures this alignment remains, and it's
intentionally placed inmediately after the related structure --no
blank line in between.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixes from Jan Kara:
"Two fsnotify fixes.
The fix from Ahelenia makes sure we generate event when modifying
inode flags, the fix from Amir disables sending of events from device
inodes to their parent directory as it could concievably create a
usable side channel attack in case of some devices and so far we
aren't aware of anybody depending on the functionality"
* tag 'fsnotify_for_v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs: send fsnotify_xattr()/IN_ATTRIB from vfs_fileattr_set()/chattr(1)
fsnotify: do not generate ACCESS/MODIFY events on child for special files
|
|
Merge power capping fixes for 6.19-rc2:
- Fix CPU hotplug locking deadlock reported by lockdep after a recent
update of the Intel RAPL power capping driver (Srinivas Pandruvada)
- Fix sscanf() error return value handling in the power capping core
and a race condition in register_control_type() (Sumeet Pawnikar)
* pm-powercap:
powercap: intel_rapl: Fix possible recursive lock warning
powercap: fix sscanf() error return value handling
powercap: fix race condition in register_control_type()
|
|
The new macro, TH_CCU_MUX_FLAGS, extends TH_CCU_MUX macro by adding two
parameters to specify clock flags and multiplexer flags.
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
|
|
TH1520 ships several PLLs that could operate in either integer or
fractional mode. However, the TRM only lists a few configuration whose
stability is considered guaranteed.
Add a table-lookup rate determination logic to support PLL rate setting,
and fill up frequency-configuration tables for AP-subsystem PLLs.
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
|
|
This divider takes c910_clk as parent and is essential for the C910
cluster to operate, thus is marked as CLK_IS_CRITICAL.
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
|
|
All PLLs found on TH1520 SoC take 21250ns at maximum to lock, and their
lock status is indicated by register PLL_STS (offset 0x80 inside AP
clock controller). We should poll the register to ensure the PLL
actually locks after enabling it.
Furthermore, a 30us delay is added after enabling the PLL, after which
the PLL could be considered stable as stated by vendor clock code.
Fixes: 56a48c1833aa ("clk: thead: add support for enabling/disabling PLLs")
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
|
|
Add binding ID for C910 bus clock, which takes CLK_C910 as parent and is
essential for C910 cluster's operation.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
|
|
Newer firmware supports hardware context priority. Set the priority based
on application input.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251217171719.2139025-1-lizhi.hou@amd.com
|
|
Newer firmware versions prefer temporal sharing only mode. In this mode,
the driver no longer needs to manage AIE array column allocation. Instead,
a new field, num_unused_col, is added to the hardware context creation
request to specify how many columns will not be used by this hardware
context.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251217191150.2145937-1-lizhi.hou@amd.com
|
|
NPU2 hardware was never publicly released and is now obsolete.
Remove all remaining NPU2 support from the driver.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251217190818.2145781-1-lizhi.hou@amd.com
|
|
Following the introduction of cpuset1_generate_sched_domains() for v1
in the previous patch, v1-specific logic can now be removed from the
generic generate_sched_domains(). This patch cleans up the v1-only
code and ensures uf_node is only visible when CONFIG_CPUSETS_V1=y.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The generate_sched_domains() function currently handles both v1 and v2
logic. However, the underlying mechanisms for building scheduler domains
differ significantly between the two versions. For cpuset v2, scheduler
domains are straightforwardly derived from valid partitions, whereas
cpuset v1 employs a more complex union-find algorithm to merge overlapping
cpusets. Co-locating these implementations complicates maintenance.
This patch, along with subsequent ones, aims to separate the v1 and v2
logic. For ease of review, this patch first copies the
generate_sched_domains() function into cpuset-v1.c as
cpuset1_generate_sched_domains() and removes v2-specific code. Common
helpers and top_cpuset are declared in cpuset-internal.h. When operating
in v1 mode, the code now calls cpuset1_generate_sched_domains().
Currently there is some code duplication, which will be largely eliminated
once v1-specific code is removed from v2 in the following patch.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Since relax_domain_level is only applicable to v1, move
update_domain_attr_tree() to cpuset-v1.c, which solely updates
relax_domain_level,
Additionally, relax_domain_level is now initialized in cpuset1_inited.
Accordingly, the initialization of relax_domain_level in top_cpuset is
removed. The unnecessary remote_partition initialization in top_cpuset
is also cleaned up.
As a result, relax_domain_level can be defined in cpuset only when
CONFIG_CPUSETS_V1=y.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This patch introduces the cpuset1_init helper in cpuset_v1.c to initialize
v1-specific fields, including the fmeter and relax_domain_level members.
The relax_domain_level related code will be moved to cpuset_v1.c in a
subsequent patch. After this move, v1-specific members will only be
visible when CONFIG_CPUSETS_V1=y.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This commit introduces the cpuset1_online_css helper to centralize
v1-specific handling during cpuset online. It performs operations such as
updating the CS_SPREAD_PAGE, CS_SPREAD_SLAB, and CGRP_CPUSET_CLONE_CHILDREN
flags, which are unique to the cpuset v1 control group interface.
The helper is now placed in cpuset-v1.c to maintain clear separation
between v1 and v2 logic.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add lockdep_assert_cpuset_lock_held() to allow other subsystems to verify
that cpuset_mutex is held.
Suggested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
SX controls are currently broken, since the clamp introduced in
commit a0ce874cfaaa ("ASoC: ops: improve snd_soc_get_volsw") does not
handle SX controls, for example where the min value in the clamp is
greater than the max value in the clamp.
Add clamp parameter to prevent clamping in SX controls.
The nature of SX controls mean that it wraps around 0, with a variable
number of bits, therefore clamping the value becomes complicated and
prone to error.
Fixes 35 kunit tests for soc_ops_test_access.
Fixes: a0ce874cfaaa ("ASoC: ops: improve snd_soc_get_volsw")
Co-developed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251216134938.788625-1-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The URL for the DS620 datasheet has changed. Update it to reflect the
current location.
Signed-off-by: Okan Akyuz <okan.akyuz.linux@gmail.com>
Link: https://lore.kernel.org/r/20251215204423.80242-1-okan.akyuz.linux@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
KVM fixes for 6.19-rc1
- Add a missing "break" to fix param parsing in the rseq selftest.
- Apply runtime updates to the _current_ CPUID when userspace is setting
CPUID, e.g. as part of vCPU hotplug, to fix a false positive and to avoid
dropping the pending update.
- Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot, as it's not
supported by KVM and leads to a use-after-free due to KVM failing to unbind
the memslot from the previously-associated guest_memfd instance.
- Harden against similar KVM_MEM_GUEST_MEMFD goofs, and prepare for supporting
flags-only changes on KVM_MEM_GUEST_MEMFD memlslots, e.g. for dirty logging.
- Set exit_code[63:32] to -1 (all 0xffs) when synthesizing a nested
SVM_EXIT_ERR (a.k.a. VMEXIT_INVALID) #VMEXIT, as VMEXIT_INVALID is defined
as -1ull (a 64-bit value).
- Update SVI when activating APICv to fix a bug where a post-activation EOI
for an in-service IRQ would effective be lost due to SVI being stale.
- Immediately refresh APICv controls (if necessary) on a nested VM-Exit
instead of deferring the update via KVM_REQ_APICV_UPDATE, as the request is
effectively ignored because KVM thinks the vCPU already has the correct
APICv settings.
|
|
msleep is not very accurate in terms of how long it actually sleeps,
whereas usleep_range is precise. Replace the timeslice sleep for
long-running workloads with the more accurate usleep_range to avoid
jitter if the sleep period is less than 20ms.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-3-matthew.brost@intel.com
(cherry picked from commit ca415c4d4c17ad676a2c8981e1fcc432221dce79)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
When imported dma-bufs are destroyed, TTM is not fully
individualizing the dma-resv, but it *is* copying the fences that
need to be waited for before declaring idle. So in the case where
the bo->resv != bo->_resv we can still drop the preempt-fences, but
make sure we do that on bo->_resv which contains the fence-pointer
copy.
In the case where the copying fails, bo->_resv will typically not
contain any fences pointers at all, so there will be nothing to
drop. In that case, TTM would have ensured all fences that would
have been copied are signaled, including any remaining preempt
fences.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: fa0af721bd1f ("drm/ttm: test private resv obj on release/destroy")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251217093441.5073-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 425fe550fb513b567bd6d01f397d274092a9c274)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
An EU stall property value of 0 is invalid and will cause a NPD.
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6453
Fixes: 1537ec85ebd7 ("drm/xe/uapi: Introduce API for EU stall sampling")
Cc: stable@vger.kernel.org
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patch.msgid.link/20251212061850.1565459-4-ashutosh.dixit@intel.com
(cherry picked from commit 5bf763e908bf795da4ad538d21c1ec41f8021f76)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
An OA property value of 0 is invalid and will cause a NPD.
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6452
Fixes: cc4e6994d5a2 ("drm/xe/oa: Move functions up so they can be reused for config ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patch.msgid.link/20251212061850.1565459-3-ashutosh.dixit@intel.com
(cherry picked from commit 7a100e6ddcc47c1f6ba7a19402de86ce24790621)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
