| Age | Commit message (Collapse) | Author |
|---|
|
Document compatible for the QMP PCIe PHY on Kaanapali platform.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Link: https://patch.msgid.link/20251124-kaanapali-pcie-phy-v4-1-d04ee9cca83b@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Introduce a driver that supports three PHYs found on the SpacemiT
K1 SoC. The first PHY is a combo PHY that can be configured for
use for either USB 3 or PCIe. The other two PHYs support PCIe
only.
All three PHYs must be programmed with an 8 bit receiver termination
value, which must be determined dynamically. Only the combo PHY is
able to determine this value. The combo PHY performs a special
calibration step at probe time to discover this, and that value is
used to program each PHY that operates in PCIe mode. The combo
PHY must therefore be probed before either of the PCIe-only PHYs
will be used.
Each PHY has an internal PLL driven from an external oscillator.
This PLL started when the PHY is first initialized, and stays
on thereafter.
During normal operation, the USB or PCIe driver using the PHY must
ensure (other) clocks and resets are set up properly.
However PCIe mode clocks are enabled and resets are de-asserted
temporarily by this driver to perform the calibration step on the
combo PHY.
Tested-by: Junzhong Pan <panjunzhong@linux.spacemit.com>
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/all/ba532f8d-a452-40e5-af46-b58b89f70a92@linaro.org/ [1]
Tested-by: Yixun Lan <dlan@gentoo.org>
Link: https://patch.msgid.link/20251218151235.454997-4-elder@riscstar.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the Device Tree binding for two PCIe PHYs present on the SpacemiT
K1 SoC. These PHYs are dependent on a separate combo PHY, which
determines at probe time the calibration values used by the PCIe-only
PHYs.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/all/ba532f8d-a452-40e5-af46-b58b89f70a92@linaro.org/ [1]
Tested-by: Yixun Lan <dlan@gentoo.org>
Link: https://patch.msgid.link/20251218151235.454997-3-elder@riscstar.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the Device Tree binding for the PCIe/USB 3.0 combo PHY found in
the SpacemiT K1 SoC. This is one of three PCIe PHYs, and is unusual
in that only the combo PHY can perform a calibration step needed to
determine settings used by the other two PCIe PHYs.
Calibration must be done with the combo PHY in PCIe mode, and to allow
this to occur independent of the eventual use for the PHY (PCIe or USB)
some PCIe-related properties must be supplied: clocks; resets; and a
syscon phandle.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/all/ba532f8d-a452-40e5-af46-b58b89f70a92@linaro.org/ [1]
Tested-by: Yixun Lan <dlan@gentoo.org>
Link: https://patch.msgid.link/20251218151235.454997-2-elder@riscstar.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
MT8195's HDMI PHY block has 4 clocks instead of just a single one.
Describe the extra clocks for it.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
[Louis-Alexis Eyraud: addressed feedback from mailing list]
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-mtk-genio-evk-hdmi-support-v2-3-a994976bb39a@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add compatible string for the HDMI PHY IP on MT8188 SoC, that is
compatible with the one found on MT8195 SoC.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-mtk-genio-evk-hdmi-support-v2-2-a994976bb39a@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For all of the HDMI PHYs compatible with the one found on MT8195
the output clock has a different datasheet name and specifically
it is called "hdmi_txpll", differently from the older HDMI PHYs
which output block is called "hdmitx_dig_cts".
Replace clock output name string check by max item number one to allow
the new name on all of the HDMI PHY IPs that are perfectly compatible
with MT8195.
[Louis-Alexis Eyraud: split patch, addressed previous feedback from
mailing list, and reworded description]
Fixes: c78fe548b062 ("dt-bindings: phy: mediatek: hdmi-phy: Add mt8195 compatible")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patch.msgid.link/20251217-mtk-genio-evk-hdmi-support-v2-1-a994976bb39a@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drop a bunch of unused members from struct ropll_config and make the
static ropll_tmds_cfg table more readable:
* add a table header
* sort rows by rate
* convert hex values to decimal (for consistency)
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251221-phy-hdptx-pll-fix-v2-2-ae4abf7f75a1@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
output
Attempting to make use of a 1080p@120Hz display mode with 10 bpc RGB on
my Acer XV275K P3 monitor results in a blank image. A similar behavior
has been reported on Philips 279M1RV.
The faulty modeline is created by drm_gtf_mode_complex() based on the
following EDID entry from the Standard Timings block:
GTF: 1920x1080 119.999987 Hz 16:9 138.840 kHz 368.759000 MHz
It's worth noting the computed pixel clock ends up being slightly higher
at 368.881000 MHz. Nevertheless, this seems to work consistently fine
with 8 bpc RGB.
After switching to 10 bpc, the TMDS character rate expected for the mode
increases to 461.101250 MHz, as per drm_hdmi_compute_mode_clock().
Since there is no entry for this rate in the ropll_tmds_cfg table, the
necessary HDMI PLL configuration parameters are calculated dynamically
by rk_hdptx_phy_clk_pll_calc(). However, the resulting output rate is
not quite a perfect match, i.e. 461.100000 MHz. That proved to be the
actual root cause of the problem.
Add a new entry to the TMDS configuration table and provide the
necessary frequency division coefficients for the PHY PLL to generate
the expected 461.101250 MHz output.
Fixes: 9d0ec51d7c22 ("phy: rockchip: samsung-hdptx: Add high color depth management")
Tested-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251221-phy-hdptx-pll-fix-v2-1-ae4abf7f75a1@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
According to IC engineer suggestion, set ssc_range as -4003 ppm
will have more tolerance for EMI, and suitable for more boards.
Besides, it's confirmed that with this setting the TX SSC test
will pass on one customer board.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251219081354.3806806-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The PHY core defines phy_pm_runtime_put() to return an int, but that
return value is never used. It also passes the return value of
pm_runtime_put() to the caller which is not very useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Modify phy_pm_runtime_put() to discard the pm_runtime_put() return
value and change its return type to void. Also drop the redundant
pm_runtime_enabled() call from there.
No intentional functional impact.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2556645.jE0xQCEvom@rafael.j.wysocki
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Passing pm_runtime_put() return value to the callers is not particularly
useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example. It also happens when the kernel is
configured with CONFIG_PM unset.
Accordingly, update samsung_mipi_dcphy_exit() to simply discard the
return value of pm_runtime_put() and always return success to the
caller.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2281919.Icojqenx9y@rafael.j.wysocki
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Printing error messages on pm_runtime_put() returning negative values
is not particularly useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Accordingly, update mixel_lvds_phy_reset() to simply discard the return
value of pm_runtime_put().
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2012926.taCxCBeP46@rafael.j.wysocki
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add compatibles for the USB3.0 PHY used in the RZ/V2H(P) and RZ/V2N SoCs.
These SoCs integrate the same USB3 PHY IP block as the RZ/G3E, so the
RZ/G3E compatible is used as a fallback for both.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20251222161846.152952-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When the OTG USB port is used to power to SoC, configured as peripheral and
used in gadget mode, communication stops without notice about 6 seconds
after the gadget is configured and enumerated.
The problem was observed on a Radxa Rock Pi S board, which can only be
powered by the only USB-C connector. That connector is the only one usable
in gadget mode. This implies the USB cable is connected from before boot
and never disconnects while the kernel runs.
The related code flow in the PHY driver code can be summarized as:
* the first time chg_detect_work starts (6 seconds after gadget is
configured and enumerated)
-> rockchip_chg_detect_work():
if chg_state is UNDEFINED:
property_enable(base, &rphy->phy_cfg->chg_det.opmode, false); [Y]
* rockchip_chg_detect_work() changes state and re-triggers itself a few
times until it reaches the DETECTED state:
-> rockchip_chg_detect_work():
if chg_state is DETECTED:
property_enable(base, &rphy->phy_cfg->chg_det.opmode, true); [Z]
At [Y] all existing communications stop. E.g. using a CDC serial gadget,
the /dev/tty* devices are still present on both host and device, but no
data is transferred anymore. The later call with a 'true' argument at [Z]
does not restore it.
Due to the lack of documentation, what chg_det.opmode does exactly is not
clear, however by code inspection it seems reasonable that is disables
something needed to keep the communication working, and testing proves that
disabling these lines lets gadget mode keep working. So prevent changes to
chg_det.opmode when there is a cable connected (VBUS present).
Fixes: 98898f3bc83c ("phy: rockchip-inno-usb2: support otg-port for rk3399")
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/lkml/20250414185458.7767aabc@booty/
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251127-rk3308-fix-usb-gadget-phy-disconnect-v2-2-dac8a02cd2ca@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When the OTG USB port is used to power the SoC, configured as peripheral
and used in gadget mode, there is a disconnection about 6 seconds after the
gadget is configured and enumerated.
The problem was observed on a Radxa Rock Pi S board, which can only be
powered by the only USB-C connector. That connector is the only one usable
in gadget mode. This implies the USB cable is connected from before boot
and never disconnects while the kernel runs.
The problem happens because of the PHY driver code flow, summarized as:
* UDC start code (triggered via configfs at any time after boot)
-> phy_init
-> rockchip_usb2phy_init
-> schedule_delayed_work(otg_sm_work [A], 6 sec)
-> phy_power_on
-> rockchip_usb2phy_power_on
-> enable clock
-> rockchip_usb2phy_reset
* Now the gadget interface is up and running.
* 6 seconds later otg_sm_work starts [A]
-> rockchip_usb2phy_otg_sm_work():
if (B_IDLE state && VBUS present && ...):
schedule_delayed_work(&rport->chg_work [B], 0);
* immediately the chg_detect_work starts [B]
-> rockchip_chg_detect_work():
if chg_state is UNDEFINED:
if (!rport->suspended):
rockchip_usb2phy_power_off() <--- [X]
At [X], the PHY is powered off, causing a disconnection. This quickly
triggers a new connection and following re-enumeration, but any connection
that had been established during the 6 seconds is broken.
The code already checks for !rport->suspended (which, somewhat
counter-intuitively, means the PHY is powered on), so add a guard for VBUS
as well to avoid a disconnection when a cable is connected.
Fixes: 98898f3bc83c ("phy: rockchip-inno-usb2: support otg-port for rk3399")
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/lkml/20250414185458.7767aabc@booty/
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251127-rk3308-fix-usb-gadget-phy-disconnect-v2-1-dac8a02cd2ca@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The mmio regmap that may be allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: 5ab90f40121a ("phy: ti: gmii-sel: Do not use syscon helper to build regmap")
Cc: stable@vger.kernel.org # 6.14
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20251127134834.2030-1-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
LAN969x uses the SparX-5 SERDES driver, so make it selectable for
ARCH_LAN969X.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Tested-by: Gabor Juhos <j4g8y7@gmail.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251031121834.665987-1-robert.marko@sartura.hr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Likely the last pull request in 2025, again a collection of lots of
small fixes. Most of them are various device-specific small fixes:
- An ASoC core fix for correcting the clamping behavior of *_SX mixer
elements
- Various fixes for ASoC fsl, SOF, etc
- Usual HD- and USB-audio quirks / fix-ups
- A couple of error-handling fixes for legacy PCMCIA drivers"
* tag 'sound-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda/realtek: fix PCI SSID for one of the HP 200 G2i laptop
ASoC: ops: fix snd_soc_get_volsw for sx controls
ALSA: hda/realtek: Add Asus quirk for TAS amplifiers
ASoC: Intel: soc-acpi-intel-mtl-match: Add 6 amp CS35L63 with feedback
ASoC: Intel: soc-acpi-intel-mtl-match: Add 6 amp CS35L56 with feedback
ASoC: fsl-asoc-card: Use of_property_present() for non-boolean properties
ASoC: rt1320: update VC blind write settings
ASoC: fsl_xcvr: provide regmap names
ASoC: fsl_sai: Add missing registers to cache default
ASoC: ak4458: remove the reset operation in probe and remove
ASoC: fsl_asrc_dma: fix duplicate debugfs directory error
ASoC: fsl_easrc: fix duplicate debugfs directory error
ALSA: hda/realtek: fix micmute LED reversed on HP Abe and Bantie
ALSA: hda/realtek: Add support for HP Clipper Laptop
ALSA: hda/realtek: Add support for HP Trekker Laptop
ALSA: usb-mixer: us16x08: validate meter packet indices
ASoC: Intel: soc-acpi-intel-nvl-match: Drop rt722 l3 from the match table
ASoC: soc-acpi / SOF: Add best_effort flag to get_function_tplg_files op
ASoC: SOF: Intel: pci-mtl: Change the topology path to intel/sof-ipc4-tplg
ASoC: SOF: ipc4-topology: set playback channel mask
...
|
|
devm_pm_runtime_enable() can fail due to memory allocation. The current
code ignores its return value after calling pm_runtime_set_active(),
leaving the device in an inconsistent state if runtime PM initialization
fails.
Check the return value of devm_pm_runtime_enable() and return on
failure. Also move the declaration of 'ret' to the function scope
to support this check.
Fixes: ee8e41b5044f ("phy: ti: phy-da8xx-usb: Add runtime PM support")
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251124105734.1027-1-vulab@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The "index" variable is used as an index into the usbphyc->phys[] array
which has usbphyc->nphys elements. So if it is equal to usbphyc->nphys
then it is one element out of bounds. The "index" comes from the
device tree so it's data that we trust and it's unlikely to be wrong,
however it's obviously still worth fixing the bug. Change the > to >=.
Fixes: 94c358da3a05 ("phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/aTfHcMJK1wFVnvEe@stanley.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use acpi_osc_handshake() introduced previously for implementing the
\_SB._OSC USB4 features control negotiation.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/3879947.MHq7AAxBmi@rafael.j.wysocki
|
|
The feature mask creation for \_SB._OSC is messy and hard to follow,
so clean it up and make all of the CPPC-related features depend on
CONFIG_ACPI_CPPC_LIB as they will not work if it is not set anyway.
Also make acpi_bus_osc_negotiate_platform_control() print a message
including a bit mask representig the features for which control has
been granted.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/4495088.ejJDZkT8p0@rafael.j.wysocki
|
|
Both acpi_bus_osc_negotiate_platform_control() and
acpi_bus_osc_negotiate_usb_control() first call acpi_run_osc() to
evaluate _OSC in "query mode", with OSC_QUERY_ENABLE set in the
capabilities buffer, and then use the resultant feature mask as
the input buffer for requesting control of those features by
calling acpi_run_osc() to evaluate _OSC with OSC_QUERY_ENABLE clear.
This involves some code duplication and unnecessary memory
allocations, so introduce a new helper function carrying out an
_OSC handshake along the lines of the above description in a simpler
way and update acpi_bus_osc_negotiate_platform_control() to use it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/1966378.CQOukoFCf9@rafael.j.wysocki
|
|
Use ACPI_FREE() for freeing an object coming from acpi_eval_osc()
and rename the "out_free" to "out" because it does not involve
kfree() any more.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/8682086.NyiUUSuA9g@rafael.j.wysocki
|
|
Split a function for processing _OSC errors called acpi_osc_error_check()
out of acpi_run_osc() to facilitate subsequent changes.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/6135328.MhkbZ0Pkbq@rafael.j.wysocki
|
|
Split a function for evaluating _OSC called acpi_eval_osc() out of
acpi_run_osc() to facilitate subsequent changes and add some more
parameters sanity checks to the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/22963770.EfDdHjke4D@rafael.j.wysocki
|
|
Instead of using one function, acpi_print_osc_error(), for printing a
debug message and dumping the _OSC request data in one go, use
acpi_handle_debug() directly for printing messages and a separate
function called acpi_dump_osc_data() for dumping the _OSC request data
before printing one or more of them.
This avoids
* dumping _OSC request data multiple times when there are
multiple error bits set in the return buffer,
* wrapping message lines on terminals with 80 character line width,
* mixing up unrelated messages by printing full lines only,
and generally helps to make the messages easier to parse.
Also, use %pUL for UUID printing instead of printing UUIDs as strings
and include the revision number into the dumped _OSC request data.
This is how the debug printout looks like when the
OSC_REQUEST_ERROR and OSC_INVALID_REVISION_ERROR bits
are set in the return buffer before the change:
ACPI: \_SB_: ACPI: (0811B06E-4A27-44F9-8D60-3CBBC22E7B48): _OSC request failed
ACPI: _OSC request data:
ACPI: 1
ACPI: 2e7eff
ACPI:
ACPI: \_SB_: ACPI: (0811B06E-4A27-44F9-8D60-3CBBC22E7B48): _OSC invalid revision
ACPI: _OSC request data:
ACPI: 1
ACPI: 2e7eff
ACPI:
and this is how it is going to look like afterward:
ACPI: \_SB_: ACPI: _OSC: UUID: 0811B06E-4A27-44F9-8D60-3CBBC22E7B48, rev: 1
ACPI: \_SB_: ACPI: _OSC: capabilities DWORD 0: [00000001]
ACPI: \_SB_: ACPI: _OSC: capabilities DWORD 1: [002e7eff]
ACPI: \_SB_: ACPI: _OSC: request failed
ACPI: \_SB_: ACPI: _OSC: invalid revision
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/10794028.nUPlyArG6x@rafael.j.wysocki
|
|
The handling of _OSC errors in acpi_run_osc() is inconsistent and
arguably not compliant with the _OSC definition (cf. Section 6.2.12 of
ACPI 6.6 [1]).
Namely, if OSC_QUERY_ENABLE is not set in the capabilities buffer and
any of the error bits are set in the _OSC return buffer, acpi_run_osc()
returns an error code and the _OSC return buffer is discarded. However,
in that case, depending on what error bits are set, the return buffer
may contain acknowledged bits for features that need to be controlled by
the kernel going forward.
If the OSC_INVALID_UUID_ERROR bit is set, the request could not be
processed at all and so in that particular case discarding the _OSC
return buffer and returning an error is the right thing to do regardless
of whether or not OSC_QUERY_ENABLE is set in the capabilities buffer.
If OSC_QUERY_ENABLE is set in the capabilities buffer and the
OSC_REQUEST_ERROR or OSC_INVALID_REVISION_ERROR bits are set in the
return buffer, acpi_run_osc() may return an error and discard the _OSC
return buffer because in that case the platform configuration does not
change. However, if any of them is set in the return buffer when
OSC_QUERY_ENABLE is not set in the capabilities buffer, the feature
mask in the _OSC return buffer still represents a set of acknowleded
features as per the _OSC definition:
The platform acknowledges the Capabilities Buffer by returning a
buffer of DWORDs of the same length. Set bits indicate acknowledgment
that OSPM may take control of the capability and cleared bits indicate
that the platform either does not support the capability or that OSPM
may not assume control.
which is not conditional on the error bits being clear, so in that case,
discarding the _OSC return buffer is questionable. There is also no
reason to return an error and discard the _OSC return buffer if the
OSC_CAPABILITIES_MASK_ERROR bit is set in it, but printing diagnostic
messages is appropriate when that happens with OSC_QUERY_ENABLE clear
in the capabilities buffer.
Adress this issue by making acpi_run_osc() follow the rules outlined
above.
Moreover, make acpi_run_osc() only take the defined _OSC error bits into
account when checking _OSC errors.
Link: https://uefi.org/specs/ACPI/6.6/06_Device_Configuration.html#osc-operating-system-capabilities [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
[ rjw: Corrected typo in the changelog ]
Link: https://patch.msgid.link/3042649.e9J7NaK4W3@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add maintainer entry for ASPEED PCIe RC driver.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
[mani: removed PHY entries]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251216-upstream_pcie_rc-v7-7-4aeb0f53c4ce@aspeedtech.com
|
|
Introduce PCIe Root Complex driver for ASPEED SoCs. Support RC
initialization, reset, clock, IRQ domain, and MSI domain setup. Implement
platform-specific setup and register configuration for ASPEED. And provide
PCI config space read/write and INTx/MSI interrupt handling.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251216-upstream_pcie_rc-v7-6-4aeb0f53c4ce@aspeedtech.com
|
|
According to PCIe specification, add FMT, TYPE and CPL status
definition for TLP header.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251216-upstream_pcie_rc-v7-5-4aeb0f53c4ce@aspeedtech.com
|
|
ASPEED AST2600 provides one PCIe RC with 5GT/s and AST2700 provides three
PCIe RC for two 16GT/s and one 5GT/s. All of these RCs have just one Root
Port to connect to PCIe device. And also have Mem, I/O access, legacy
interrupt and MSI.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251216-upstream_pcie_rc-v7-2-4aeb0f53c4ce@aspeedtech.com
|
|
The Orangepi 4A has a SPI-NOR flash connected to spi0 on the PC pins.
The HOLD and WP pins are not connected, and are instead pulled up by the
supply rail.
Enable spi0 and add a device node for the SPI-NOR flash.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251221110513.1850535-5-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
The A523 family SoCs have four SPI controllers. One of them also
supports DBI mode.
Add device nodes for all of them. Also add pinmux nodes for spi0 on the
PC pins, which is commonly used for SPI-NOR boot flash.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251221110513.1850535-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
Enabling runtime PM before attaching the QPHY instance as driver data
can lead to a NULL pointer dereference in runtime PM callbacks that
expect valid driver data. There is a small window where the suspend
callback may run after PM runtime enabling and before runtime forbid.
This causes a sporadic crash during boot:
```
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a1
[...]
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.7+ #116 PREEMPT
Workqueue: pm pm_runtime_work
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : qusb2_phy_runtime_suspend+0x14/0x1e0 [phy_qcom_qusb2]
lr : pm_generic_runtime_suspend+0x2c/0x44
[...]
```
Attach the QPHY instance as driver data before enabling runtime PM to
prevent NULL pointer dereference in runtime PM callbacks.
Reorder pm_runtime_enable() and pm_runtime_forbid() to prevent a
short window where an unnecessary runtime suspend can occur.
Use the devres-managed version to ensure PM runtime is symmetrically
disabled during driver removal for proper cleanup.
Fixes: 891a96f65ac3 ("phy: qcom-qusb2: Add support for runtime PM")
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://patch.msgid.link/20251219085640.114473-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Clear the PCS_TX_SWING_FULL field mask before setting the new value
in PHY_CTRL5 register. Without clearing the mask first, the OR operation
could leave previously set bits, resulting in incorrect register
configuration.
Fixes: 63c85ad0cd81 ("phy: fsl-imx8mp-usb: add support for phy tuning")
Suggested-by: Leonid Segal <leonids@variscite.com>
Acked-by: Pierluigi Passaro <pierluigi.p@variscite.com>
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://patch.msgid.link/20251219160912.561431-1-stefano.r@variscite.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Merge series from Mateusz Litwin <mateusz.litwin@nokia.com>:
On the Stratix10 platform, indirect reads can become very slow due to lost
interrupts and/or missed `complete()` calls, causing
`wait_for_completion_timeout()` to expire.
Three issues were identified:
1) A race condition exists between the read loop and IRQ `complete()`
call:
An IRQ can call `complete()` after the inner loop ends, but before
`reinit_completion()`, losing the completion event and leading to
`wait_for_completion_timeout()` expire. This function will not return
an error because `bytes_to_read` > 0 (indicating data is already in the
FIFO) and the final `ret` value is overwritten by
`cqspi_wait_for_bit()` return value (indicating request completion),
masking the timeout.
For test purpose, logging was added to print the count of timeouts and
the outer loop count.
$ dd if=/dev/mtd0 of=/dev/null bs=64M count=1
[ 2232.925219] cadence-qspi ff8d2000.spi: Indirect read error timeout
(1) loop (12472)
[ 2236.200391] cadence-qspi ff8d2000.spi: Indirect read error timeout
(1) loop (12460)
[ 2239.482836] cadence-qspi ff8d2000.spi: Indirect read error timeout
(5) loop (12450)
This indicates that such an event is rare, but possible.
Tested on the Stratix10 platform.
2) The quirk assumes the indirect read path never leaves the inner loop on
SoCFPGA. This assumption is incorrect when using slow flash. Disabling
IRQs in the inner loop can cause lost interrupts.
3) The `CQSPI_SLOW_SRAM` quirk disables `CQSPI_REG_IRQ_IND_COMP` (indirect
completion) interrupt, relying solely on the `CQSPI_REG_IRQ_WATERMARK`
(FIFO watermark) interrupt. For small transfers sizes, the final data
read might not fill the FIFO sufficiently to trigger the watermark,
preventing completion and leading to wait_for_completion_timeout()
expiration.
Two patches have been prepared to resolve these issues.
- [1/2] spi: cadence-quadspi: Prevent lost complete() call during
indirect read
Moving `reinit_completion()` before the inner loop prevents a race
condition. This might cause a premature IRQ complete() call to occur;
however, in the worst case, this will result in a spurious wakeup and
another wait cycle, which is preferable to waiting for a timeout.
- [2/2] spi: cadence-quadspi: Improve CQSPI_SLOW_SRAM quirk if flash is
slow
Re-enabling `CQSPI_REG_IRQ_IND_COMP` interrupt resolves the problem for
small reads and removes the disabling of interrupts, addressing the
issue with lost interrupts. This marginally increases the IRQ count.
Test:
$ dd if=/dev/mtd0 of=/dev/null bs=1M count=64
Results from the Stratix10 platform with mt25qu02g flash.
FIFO size in all tests: 128
Serviced interrupt call counts:
Without `CQSPI_SLOW_SRAM` quirk: 16 668 850
With `CQSPI_SLOW_SRAM` quirk: 204 176
With `CQSPI_SLOW_SRAM` and this patch: 224 528
Patch 2/2: Delivers a substantial read‑performance improvement for the
Cadence QSPI controller on the Stratix10 platform. Patch 1/2: Applies to
all platforms and should yield a modest performance gain, most noticeable
with large `CQSPI_READ_TIMEOUT_MS` values and workloads dominated by many
small reads.
|
|
There exists a null pointer dereference in simple_xattrs_free() as
part of the __kernfs_new_node() routine. Within __kernfs_new_node(),
err_out4 calls simple_xattr_free(), but kn->iattr may be NULL if
__kernfs_setattr() was never called. As a result, the first argument to
simple_xattrs_free() may be NULL + 0x38, and no NULL check is done
internally, causing an incorrect pointer dereference.
Add a check to ensure kn->iattr is not NULL, meaning __kernfs_setattr()
has been called and kn->iattr is allocated. Note that struct kernfs_node
kn is allocated with kmem_cache_zalloc, so we can assume kn->iattr will
be NULL if not allocated.
An alternative fix could be to not call simple_xattrs_free() at all. As
was previously discussed during the initial patch, simple_xattrs_free()
is not strictly needed and is included to be consistent with
kernfs_free_rcu(), which also helps the function maintain correctness if
changes are made in __kernfs_new_node().
Reported-by: syzbot+6aaf7f48ae034ab0ea97@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6aaf7f48ae034ab0ea97
Fixes: 382b1e8f30f7 ("kernfs: fix memory leak of kernfs_iattrs in __kernfs_new_node")
Signed-off-by: Will Rosenberg <whrosenb@asu.edu>
Link: https://patch.msgid.link/20251217060107.4171558-1-whrosenb@asu.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Building the XE driver through Yocto throws this QA warning:
WARNING: mc:house:linux-stable-6.17-r0 do_package_qa: QA Issue: File /usr/src/debug/linux-stable/6.17/drivers/gpu/drm/xe/generated/xe_device_wa_oob.h in package linux-stable-src contains reference to TMPDIR [buildpaths]
WARNING: mc:house:linux-stable-6.17-r0 do_package_qa: QA Issue: File /usr/src/debug/linux-stable/6.17/drivers/gpu/drm/xe/generated/xe_wa_oob.h in package linux-stable-src contains reference to TMPDIR [buildpaths]
...because the comment at the top of the generated header contains the
absolute path to the rules file at build time:
* This file was generated from rules: /home/calvinow/git/meta-house/build/tmp-house/work-shared/nuc14rvhu7/kernel-source/drivers/gpu/drm/xe/xe_device_wa_oob.rules
Fix this minor annoyance by putting the basename of the rules file in
the generated comment instead of the absolute path, so the generated
header contents no longer depend on the location of the kernel source.
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Link: https://patch.msgid.link/20251222165441.516102-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Commit 5488bec96bcc ("drm/xe/uapi: Use hint for guc to set GT frequency")
introduced low latency hint for use by user space when creating an exec
queue. This instructs SLPC to ramp the GT frequency aggressively.
SVM relies on an internal exec queue to migrate memory upon page faults.
This change creates this exec queue with the low latency hint to speed up
migration.
This should not impact systems where GT frequency is set over sysfs, or
with long running workloads which give enough time for the frequency to
ramp up. An example of memory access pattern that shows an improvement of
SVM performance is running hundreds of times IGT eu-fault-2m-once-device
in xe_exec_system_allocator. The copy duration provided by GT stats in
svm_2M_device_copy_us shows per GPU page fault:
~ 165 μs without low latency hint
~ 130 μs with low latency hint
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20251223115327.49555-1-francois.dugast@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Johan Hovold <johan@kernel.org> says:
The new buffer management code has not been tested or reviewed properly
and breaks boot of machines like the Lenovo ThinkPad X13s.
Fixing this will require designing a proper interface for managing these
transactions, something which most likely involves reverting most of the
offending commit anyway.
Revert the broken code to fix the regression and let Intel come up with
a properly tested implementation for a later kernel.
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
message out fields"
This reverts commit 3e082978c33151d576694deac8abde021ea669a8.
The new buffer management code has not been tested or reviewed properly
and breaks boot of machines like the Lenovo ThinkPad X13s:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
CPU: 0 UID: 0 PID: 813 Comm: kworker/0:3 Not tainted 6.19.0-rc2 #26 PREEMPT
Hardware name: LENOVO 21BYZ9SRUS/21BYZ9SRUS, BIOS N3HET87W (1.59 ) 12/05/2023
Workqueue: events ucsi_handle_connector_change [typec_ucsi]
Call trace:
ucsi_sync_control_common+0xe4/0x1ec [typec_ucsi] (P)
ucsi_run_command+0xcc/0x194 [typec_ucsi]
ucsi_send_command_common+0x84/0x2a0 [typec_ucsi]
ucsi_get_connector_status+0x48/0x78 [typec_ucsi]
ucsi_handle_connector_change+0x5c/0x4f4 [typec_ucsi]
process_one_work+0x208/0x60c
worker_thread+0x244/0x388
The new code completely ignores concurrency so that the message length
can be updated while a transaction is ongoing. In the above case, the
length ends up being modified by another thread while processing an ack
so that the NULL cci pointer is dereferenced.
Fixing this will require designing a proper interface for managing these
transactions, something which most likely involves reverting most of the
offending commit anyway.
Revert the broken code to fix the regression and let Intel come up with
a properly tested implementation for a later kernel.
Fixes: 3e082978c331 ("usb: typec: ucsi: Update UCSI structure to have message in and message out fields")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-5-johan@kernel.org
|
|
This reverts commit db0028637cc832add6d87564fcc2ebb12781b046.
The new buffer management code that this feature relies on is broken so
revert for now.
As for the in buffer, nothing prevents the out message size and buffer
from being modified while the message is being processed due to lack of
serialisation.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-4-johan@kernel.org
|
|
This reverts commit 775fae520e6ae62c393a8daf42dc534f09692f3f.
The new buffer management code that this relies on is broken so revert
for now.
It also looks like the error handling needs some more thought as the
message out size is not reset on errors.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-3-johan@kernel.org
|
|
This reverts commit 1b474ee01fbb73b1365adbf9b3067f7375e471ee.
The new buffer management code that this feature relies on is broken so
revert for now.
The interface for writing data and support for UCSI_SET_PDOS looks like
it could use some more thought as well.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-2-johan@kernel.org
|
|
ucsi_sync_control_common"
This reverts commit 14ad4c10d5bdd413ff9a914260e89b5f54b7a2c7.
The originally offending commit will be reverted instead of this fix up
at this point in time, so revert this fix.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: stable <stable@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Fixes: 14ad4c10d5bd ("usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common")
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 5106dbab44fba8ec6dede3f4e75d17f5aa777ec8.
There are reported issues in this file, so revert the commit for now so
that the original offending changes can be reverted and working systems
can be restored. This can come back at a later time if it is rebased
yet-again (sorry.)
Cc: stable <stable@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Fixes: 5106dbab44fb ("usb: typec: ucsi: Get connector status after enable notifications")
Cc: Kenneth R. Crudup <kenny@panix.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Hsin-Te Yuan <yuanhsinte@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Error labels should be named after what they do rather than after from
where they are jumped to.
Rename the probe error labels for consistency and to improve
readability.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Error labels should be named after what they do rather than after from
where they are jumped to.
Rename the probe error labels for consistency and to improve
readability.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
