| Age | Commit message (Collapse) | Author |
|---|
|
Each rtla tool duplicates parsing of many common options. This creates
maintenance overhead and risks inconsistencies when updating these
options.
Add common_parse_options() to centralize parsing of options used across
all tools.
Common options to be migrated in future patches.
Changes since v1:
- restore opterr
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/r/20251209100047.2692515-1-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
Add new option --bpf-action into common_timerlat_options.txt, including
the format in which it takes the BPF program, and a reference to an
example.
Link: https://lore.kernel.org/r/20251126144205.331954-8-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
The sample/ directory in tools/tracing/rtla was renamed to example/ in
an earlier commit.
Rename it also in the documentation.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251126144205.331954-7-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
Add -v flag to prove command to also print the names of tests that
succeeded, not only those that failed, to allow easier debugging of the
test suite.
Also, drop printing the option and value to stdout in
check_with_osnoise_options, which was a debugging print that was
accidentally left in the final commit, and which would be otherwise now
visible in make check output, as stdout is no longer suppressed.
Suggested-by: Crystal Wood <crwood@redhat.com>
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251126144205.331954-6-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
Add a test that implements a BPF program writing to a test map, which
is attached to RTLA via --bpf-action to be executed on theshold
overflow.
A combination of --on-threshold shell with bpftool (which is always
present if BPF support is enabled) is used to check whether the BPF
program has executed successfully.
Suggested-by: Crystal Wood <crwood@redhat.com>
Link: https://lore.kernel.org/r/20251126144205.331954-5-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
Add an example BPF action program that prints the measured latency to
the tracefs buffer via bpf_printk().
A new Makefile target, "examples", is added to build the example. In
addition, "sample/" subfolder is renamed to "example".
If BPF skeleton support is unavailable or disabled, a warning will be
displayed when building the BPF action program example.
Link: https://lore.kernel.org/r/20251126144205.331954-4-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
Add option --bpf-action that allows the user to attach an external BPF
program that will be executed via BPF tail call on latency threshold
overflow.
Executing additional BPF code on latency threshold overflow allows doing
low-latency and in-kernel troubleshooting of the cause of the overflow.
The option takes an argument, which is a path to a BPF ELF file
expected to contain a function named "action_handler" in a section named
"tp/timerlat_action" (the section is necessary for libbpf to assign the
correct BPF program type to it).
Link: https://lore.kernel.org/r/20251126144205.331954-3-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
Add a map to the rtla-timerlat BPF program that holds a file descriptor
of another BPF program, to be executed on threshold overflow.
timerlat_bpf_set_action() is added as an interface to set the program.
Link: https://lore.kernel.org/r/20251126144205.331954-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
The rtla tools have significant code quadruplication in their usage
functions. Each tool implements its own version of the same help text
formatting and option descriptions, leading to maintenance overhead and
inconsistencies. Documentation/tools/rtla/common_options.rst lists 14
common options.
Add common_usage() infrastructure to consolidate help formatting.
Subsequent patches will extend this to handle other common options.
The refactored output is almost identical to the original, with the
following changes:
- add square brackets to specify optionality: `usage: [rtla] ...`
- remove `-q` from timerlat hist because hist tools don't support it
- minor spacing
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/r/20251124063204.845425-1-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
This avoids startup races where one of the instances hit a threshold
before all instances were enabled, and thus tracing stops without
the relevant event. In particular, this is not uncommon with the
tests that set a very tight threshold and then complain if there's
no analysis.
This also ensures that we don't stop tracing during a warmup.
The downside is a small chance of having an event over the threshold
early in the output, without stopping on it, which could cause user
confusion. This should be less likely if the warmup feature is used, but
that doesn't eliminate the race window, just the odds of an unusual spike
right at that moment.
Signed-off-by: Crystal Wood <crwood@redhat.com>
Link: https://lore.kernel.org/r/20251112152529.956778-6-crwood@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
We have to resort to a bit of a hack: python-libevdev gets the
properties from libevdev at module init time. If libevdev hasn't been
rebuilt with the new property it won't be automatically populated. So we
hack around this by constructing the property manually.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Instead of multiple spellings of a string-provided argument, let's make
this a tad more type-safe and use an enum here.
And while we do this fix the two wrong devices:
- elan_04f3_313a (HP ZBook Fury 15) is discrete button pad
- dell_044e_1220 (Dell Precision 7740) is a discrete button pad
Equivalent hid-tools commit
https://gitlab.freedesktop.org/libevdev/hid-tools/-/commit/8300a55bf4213c6a252cab8cb5b34c9ddb191625
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Not all our tests really require it but since it's likely pip-installed
anyway it's trivial to require the new version, just in case we want to
start cleaning up other bits.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
A Digitizer/Button Type value of 1 indicates the device is a
pressurepad, see
https://learn.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Add sama7d65 compatibility string.
Sama7d65 does not have a full last bank of PIO lines similar to the
Sama7g54 SoC. Sama7d65 only has 14 lines on the last PIO bank not the
full 32; adjusting the SoC attributes accordingly.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Another Chicony Electronics HP 5MP Camera with USB ID 04F2:B882
reports a HID sensor interface that is not actually implemented.
Add the device to the HID ignore list so the bogus sensor is never
exposed to userspace. Then the system won't hang when runtime PM
tries to wake the unresponsive device.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The i.MX952 System Manager (SM) firmware supports the System Control
Management Interface (SCMI) pinctrl protocol, similar to the i.MX95 SM.
The base offset for the i.MX952 IOMUXC Daisy input register differs from
that of the i.MX95. Update the pinctrl-imx-scmi driver to add support for
i.MX952.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
i.MX94 has special muxing options for certain pins. Their mux settings
are not in IOMUXC module. i.MX System Manager Firmware includes new vendor
defined pinctrl type to SCMI pinctrl driver to handle these pins. The MUX
value field in the IOMUX table is extended to 16 bits where the lower 8
bits represent the current IOMUX value and the upper 8 bits represent the
new extended mux added in i.MX94.
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The pattern for pinmux node names is typically the peripheral name and
instance number, followed by pingroup name if there are multiple options.
Normally the instance number is directly appended to the peripheral
name, like "mmc0" or "i2c2". But if the peripheral name ends with a
number, then it becomes confusing.
On the A20, the PS2 interface controller has two instances. This
produces pinmux node names like "ps2-0-pins". Make the sub-pattern
"[0-9]-" valid to fit this pattern. Avoid having to confusing "ps20-pins"
name.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add DMA buffer readiness check before reading DMA buffer to avoid
unexpected NULL pointer accessing.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
intel-thc-dma.c uses sgl_alloc() resulting in a build failure
if CONFIG_SGL_ALLOC is not enabled
Signed-off-by: Tim Zimmermann <tim@linux4.de>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
K3 SoC expand drive strength to 4 bits which support even larger
settings table comparing to old SoC generation. Also schmitter trigger
setting is changed to 1 bit.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
For the pinctrl IP of SpacemiT's K3 SoC, it has different register offset
comparing with previous SoC generation, so introduce a function to do the
pin to offset mapping. Also add all the pinctrl data.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add new compatible string for SpacemiT K3 SoC, the pinctrl IP shares
almost same logic with previous K1 generation, but has different register
offset and pin configuration, for example the drive strength and
schmitter trigger settings has been changed.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
In order to better extend the pinctrl support for future new SoC, convert
drive strength setting from free form text to more standard schema format.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The DTS code coding style expects lowercase hex for values and unit
addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20251223152510.155463-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
DTS coding style prefers hyphens instead of underscores in the node
names. Change should be safe, because node names are not considered an
ABI.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20251223152510.155463-3-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Similar to commit 835a50753579 ("selftests/bpf: Add -fms-extensions to
bpf build flags") and commit 639f58a0f480 ("bpftool: Fix build warnings
due to MS extensions")
The kernel is now built with -fms-extensions, therefore
generated vmlinux.h contains types like:
struct slab {
..
struct freelist_counters;
};
Use -fms-extensions and -Wno-microsoft-anon-tag flags
to build bpf programs that #include "vmlinux.h"
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Similar to commit 835a50753579 ("selftests/bpf: Add -fms-extensions to
bpf build flags") and commit 639f58a0f480 ("bpftool: Fix build warnings
due to MS extensions")
The kernel is now built with -fms-extensions, therefore
generated vmlinux.h contains types like:
struct slab {
..
struct freelist_counters;
};
Use -fms-extensions and -Wno-microsoft-anon-tag flags
to build bpf programs that #include "vmlinux.h"
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Commit 85b21fdec906e ("thermal/drivers/generic-adc: Register thermal
zones as hwmon sensors") made "generic-adc-thermal" also register hwmon
attributes. That means we now have the temperature sensor shown twice:
- once from iio-hwmon
- and another time from generic-adc-thermal
We need the latter for SoC temperature control, so simply drop the
former so userspace doesn't see duplicate sensors. Also
generic-adc-thermal provides a better name to userspace
("soc_thermal-virtual-0") than iio_hwmon.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20251108211503.1578711-1-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
For use the init_srcu_struct*() to initialized srcu structure,
the srcu structure's->srcu_sup and sda use GFP_KERNEL flags to
allocate memory. similarly, if set SRCU_SIZING_INIT, the
srcu_sup's->node can still use GFP_KERNEL flags to allocate
memory, not need to use GFP_ATOMIC flags all the time.
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Commit 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in
__rcu_read_unlock()") removes the recursion-protection code from
__rcu_read_unlock(). Therefore, we could invoke the deadloop in
raise_softirq_irqoff() with ftrace enabled as follows:
WARNING: CPU: 0 PID: 0 at kernel/trace/trace.c:3021 __ftrace_trace_stack.constprop.0+0x172/0x180
Modules linked in: my_irq_work(O)
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.18.0-rc7-dirty #23 PREEMPT(full)
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__ftrace_trace_stack.constprop.0+0x172/0x180
RSP: 0018:ffffc900000034a8 EFLAGS: 00010002
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff826d7b87 RDI: ffffffff826e9329
RBP: 0000000000090009 R08: 0000000000000005 R09: ffffffff82afbc4c
R10: 0000000000000008 R11: 0000000000011d7a R12: 0000000000000000
R13: ffff888003874100 R14: 0000000000000003 R15: ffff8880038c1054
FS: 0000000000000000(0000) GS:ffff8880fa8ea000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b31fa7f540 CR3: 00000000078f4005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<IRQ>
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
__is_insn_slot_addr+0x54/0x70
kernel_text_address+0x48/0xc0
__kernel_text_address+0xd/0x40
unwind_get_return_address+0x1e/0x40
arch_stack_walk+0x9c/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
__raise_softirq_irqoff+0x61/0x80
__flush_smp_call_function_queue+0x115/0x420
__sysvec_call_function_single+0x17/0xb0
sysvec_call_function_single+0x8c/0xc0
</IRQ>
Commit b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work")
fixed the infinite loop in rcu_read_unlock_special() for IRQ work by
setting a flag before calling irq_work_queue_on(). We fix this issue by
setting the same flag before calling raise_softirq_irqoff() and rename the
flag to defer_qs_pending for more common.
Fixes: 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in __rcu_read_unlock()")
Reported-by: Tengda Wu <wutengda2@huawei.com>
Signed-off-by: Yao Kai <yaokai34@huawei.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Lack of parentheses causes the ->exp_current() function, for example,
srcu_expedite_current(), to be called only once in four billion times
instead of the intended once in 256 times. This commit therefore adds
the needed parentheses.
Reported-by: Chris Mason <clm@meta.com>
Reported-by: Joel Fernandes <joelagnelf@nvidia.com>
Fixes: 950063c6e897 ("rcutorture: Test srcu_expedite_current()")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
If an expedited RCU CPU stall ends just at the stall-warning timeout,
the current code will print an expedited stall-warning message, but one
that doesn't identify any CPUs or tasks causing the stall. This is most
likely to happen for short-timeout stalls, for example, the 20-millisecond
timeouts that are sometimes used for small embedded devices. Needless to
say, these semi-empty stall-warning messages can be rather confusing.
One option would be to suppress the stall-warning message entirely in
this case, but the near-miss information can be quite valuable.
Detect this race condition and emits a "INFO: Expedited stall ended
before state dump start" message to clarify matters.
[boqun: Apply feedback from Borislav]
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Add compatible string for MediaTek MT7981 PCIe Gen3 controller.
The MT7981 PCIe controller is compatible with the MT8192 PCIe
controller.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251223-openwrt-one-network-v5-1-7d1864ea3ad5@collabora.com
|
|
After resume from suspend to RAM, the following splash is generated if
the HDMI driver is probed (independent of a connected cable):
[ 1194.484052] irq 80: nobody cared (try booting with the "irqpoll" option)
[ 1194.484074] CPU: 0 UID: 0 PID: 627 Comm: rtcwake Not tainted 6.17.0-rc7-g96f1a11414b3 #1 PREEMPT
[ 1194.484082] Hardware name: Rockchip RK3576 EVB V10 Board (DT)
[ 1194.484085] Call trace:
[ 1194.484087] ... (stripped)
[ 1194.484283] handlers:
[ 1194.484285] [<00000000bc363dcb>] dw_hdmi_qp_main_hardirq [dw_hdmi_qp]
[ 1194.484302] Disabling IRQ #80
Apparently the HDMI IP is losing part of its state while the system
is suspended and generates spurious interrupts during resume. The
bug has not yet been noticed, as system suspend does not yet work
properly on upstream kernel with either the Rockchip RK3588 or RK3576
platform.
Fixes: 128a9bf8ace2 ("drm/rockchip: Add basic RK3588 HDMI output support")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251014-rockchip-hdmi-suspend-fix-v1-1-983fcbf44839@collabora.com
|
|
The value of FPEX32_EL2 has no effect on execution in AArch64 state, and
consequently there's no need for an ISB after writing to it in the hyp
code (which executes in AArch64 state). When performing an exception
return to AArch32 state, the exception return will provide the necessary
context synchronization event.
Remove the redundant ISB.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260106173707.3292074-4-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
There's a gap in the KVM_HOST_DATA_FLAG_* indices since the removal of
KVM_HOST_DATA_FLAG_HOST_SVE_ENABLED and
KVM_HOST_DATA_FLAG_HOST_SME_ENABLED in commits:
* 459f059be702 ("KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN")
* 407a99c4654e ("KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN")
Shuffle the indices to remove the gap, as Oliver requested at the time of
the removals:
https://lore.kernel.org/linux-arm-kernel/Z6qC4qn47ONfDCSH@linux.dev/
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260106173707.3292074-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The comment in fpsimd_lazy_switch_to_host() erroneously says guest traps
for FPSIMD/SVE/SME are disabled by fpsimd_lazy_switch_to_guest(). In
reality, the traps are disabled by __activate_cptr_traps(), and
fpsimd_lazy_switch_to_guest() only manipulates the SVE vector length.
This was mistake; I accidentally copy+pasted the wrong function name in
commit:
59419f10045b ("KVM: arm64: Eagerly switch ZCR_EL{1,2}")
Fix the comment.
Fixes: 59419f10045b ("KVM: arm64: Eagerly switch ZCR_EL{1,2}")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260106173707.3292074-2-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
It already have default for error case (A), no need to have
SND_SOC_DAIFMT_RIGHT_J for error (B). Remove it.
static int es8375_set_dai_fmt(...)
...
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_RIGHT_J:
(B) return -EINVAL;
...
default:
(A) return -EINVAL;
}
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87eco20zn3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If manipulating big-endian data, make the pointers be big-endian
instead of host-endian. This should stop the following sparse
warnigns about endian-conversion:
sound/soc/soc-ops.c:547:33: warning: invalid assignment: &=
sound/soc/soc-ops.c:547:33: left side has type unsigned short
sound/soc/soc-ops.c:547:33: right side has type restricted __be16
sound/soc/soc-ops.c:551:33: warning: invalid assignment: &=
sound/soc/soc-ops.c:551:33: left side has type unsigned int
sound/soc/soc-ops.c:551:33: right side has type restricted __be32
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://patch.msgid.link/20260106225846.83580-1-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
linux-next merge complains about build break with make htmldocs :
Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda:45: ERROR: Unexpected indentation. [docutils]
Closes: https://lkml.kernel.org/r/20260106114933.638b073f@canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jie Gan <jie.gan@oss.qualcomm.com>
Cc: Tao Zhang <tao.zhang@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
In order to enable the HDMI output support on Mediatek Genio 510-EVK,
700-EVK, and 1200-EVK boards, enable the driver for it in the default
configuration.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
It's a requirement that DT overlays be applied at build time in order to
validate them as overlays are not validated on their own.
Add missing target for mt8395-radxa hd panel overlay.
Fixes: 4c8ff61199a7 ("arm64: dts: mediatek: mt8395-radxa-nio-12l: Add Radxa 8 HD panel")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: AngeloGioacchino Del Regno <angelogiaocchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Build devicetree binaries for testing overlays and providing users
full dtb without using overlays for Bananapi R4 (pro) variants.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Build devicetree binaries for testing overlays and providing users
full dtb without using overlays.
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: a58c36806741 ("arm64: dts: mediatek: mt7988a-bpi-r4pro: Add mmc overlays")
Fixes: dec929e61a42 ("arm64: dts: mediatek: mt7988a-bpi-r4-pro: Add PCIe overlays")
Fixes: 714a80ced07a ("arm64: dts: mediatek: mt7988a-bpi-r4: Add dt overlays for sd + emmc")
Fixes: 312189ebb802 ("arm64: dts: mt7986: add overlay for SATA power socket on BPI-R3")
Fixes: 8e01fb15b815 ("arm64: dts: mt7986: add Bananapi R3")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
DTS coding style prefers hyphens instead of underscores in the node
names. Change should be safe, because node names are not considered an
ABI.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
We allocate memory for the GPIO lookup table at the top of
gpio_shared_add_proxy_lookup() but we don't use it until the very end.
Depending on the timing, we may return earlier. Move the allocation
towards the end.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20260106-gpio-shared-fixes-v2-3-c7091d2f7581@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
When matching the reset-gpio reference with the actual firmware node
consuming the GPIO, we also need to lock the structure associated with
the latter as it can change while we're doing it.
Due to triggering lockdep false-positives, we need to use a per-reference
lockdep class but accidentally, this also allows us to remove the
previous lockdep workaround for cleaner code.
Fixes: 49416483a953 ("gpio: shared: allow sharing a reset-gpios pin between reset-gpio and gpiolib")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/00107523-7737-4b92-a785-14ce4e93b8cb@samsung.com/
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20260106-gpio-shared-fixes-v2-2-c7091d2f7581@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
