| Age | Commit message (Collapse) | Author |
|---|
|
This enables support for the Qualcomm-based Surface Pro 11.
Signed-off-by: Dale Whinham <daleyo@gmail.com>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251220-surface-sp11-for-next-v6-3-81f7451edb77@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Since telemetry events are enumerated on resctrl mount the RDT_RESOURCE_PERF_PKG
resource is not considered "monitoring capable" during early resctrl initialization.
This means that the domain list for RDT_RESOURCE_PERF_PKG is not built when the CPU
hotplug notifiers are registered and run for the first time right after resctrl
initialization.
Mark the RDT_RESOURCE_PERF_PKG as "monitoring capable" upon successful telemetry
event enumeration to ensure future CPU hotplug events include this resource and
initialize its domain list for CPUs that are already online.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
L3 monitor features are enumerated during resctrl initialization and
rmid_ptrs[] that tracks all RMIDs and depends on the number of supported
RMIDs is allocated during this time.
Telemetry monitor features are enumerated during first resctrl mount and
may support a different number of RMIDs compared to L3 monitor features.
Delay allocation and initialization of rmid_ptrs[] until first mount.
Since the number of RMIDs cannot change on later mounts, keep the same set of
rmid_ptrs[] until resctrl_exit(). This is required because the limbo handler
keeps running after resctrl is unmounted and needs to access rmid_ptrs[]
as it keeps tracking busy RMIDs after unmount.
Rename routines to match what they now do:
dom_data_init() -> setup_rmid_lru_list()
dom_data_exit() -> free_rmid_lru_list()
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
resctrl assumes that only the L3 resource supports monitor events, so it
simply takes the rdt_resource::num_rmid from RDT_RESOURCE_L3 as the system's
number of RMIDs.
The addition of telemetry events in a different resource breaks that
assumption.
Compute the number of available RMIDs as the minimum value across all
mon_capable resources (analogous to how the number of CLOSIDs is computed
across alloc_capable resources).
Note that mount time enumeration of the telemetry resource means that
this number can be reduced. If this happens, then some memory will
be wasted as the allocations for rdt_l3_mon_domain::mbm_states[] and
rdt_l3_mon_domain::rmid_busy_llc created during resctrl initialization will
be larger than needed.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
closid_num_dirty_rmid[] and rmid_ptrs[] are allocated together during resctrl
initialization and freed together during resctrl exit.
Telemetry events are enumerated on resctrl mount so only at resctrl mount will
the number of RMID supported by all monitoring resources and needed as size
for rmid_ptrs[] be known.
Separate closid_num_dirty_rmid[] and rmid_ptrs[] allocation and free in
preparation for rmid_ptrs[] to be allocated on resctrl mount.
Keep the rdtgroup_mutex protection around the allocation and free of
closid_num_dirty_rmid[] as ARM needs this to guarantee memory ordering.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
There are now three meanings for "number of RMIDs":
1) The number for legacy features enumerated by CPUID leaf 0xF. This is the
maximum number of distinct values that can be loaded into MSR_IA32_PQR_ASSOC.
Note that systems with Sub-NUMA Cluster mode enabled will force scaling down
the CPUID enumerated value by the number of SNC nodes per L3-cache.
2) The number of registers in MMIO space for each event. This is enumerated in
the XML files and is the value initialized into event_group::num_rmid.
3) The number of "hardware counters" (this isn't a strictly accurate
description of how things work, but serves as a useful analogy that does
describe the limitations) feeding to those MMIO registers. This is enumerated
in telemetry_region::num_rmids returned by intel_pmt_get_regions_by_feature().
Event groups with insufficient "hardware counters" to track all RMIDs are
difficult for users to use, since the system may reassign "hardware counters"
at any time. This means that users cannot reliably collect two consecutive
event counts to compute the rate at which events are occurring.
Disable such event groups by default. The user may override this with
a command line "rdt=" option. In this case limit an under-resourced event
group's number of possible monitor resource groups to the lowest number of
"hardware counters".
Scan all enabled event groups and assign the RDT_RESOURCE_PERF_PKG resource
"num_rmid" value to the smallest of these values as this value will be used
later to compare against the number of RMIDs supported by other resources to
determine how many monitoring resource groups are supported.
N.B. Change type of resctrl_mon::num_rmid to u32 to match its usage and the
type of event_group::num_rmid so that min(r->num_rmid, e->num_rmid) won't
complain about mixing signed and unsigned types.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Commit ddcadb297ce5 ("KVM: arm64: Ignore EAGAIN for walks outside of a
fault") introduced a new walker flag ('KVM_PGTABLE_WALK_HANDLE_FAULT')
to KVM's page-table code. When set, the walk logic maintains its
previous behaviour of terminating a walk as soon as the visitor callback
returns an error. However, when the flag is clear, the walk will
continue if the visitor returns -EAGAIN and the error is then suppressed
and returned as zero to the caller.
Clearing the flag is beneficial when write-protecting a range of IPAs
with kvm_pgtable_stage2_wrprotect() but is not useful in any other
cases, either because we are operating on a single page (e.g.
kvm_pgtable_stage2_mkyoung() or kvm_phys_addr_ioremap()) or because the
early termination is desirable (e.g. when mapping pages from a fault in
user_mem_abort()).
Subsequently, commit e912efed485a ("KVM: arm64: Introduce the EL1 pKVM
MMU") hooked up pKVM's hypercall interface to the MMU code at EL1 but
failed to propagate any of the walker flags. As a result, page-table
walks at EL2 fail to set KVM_PGTABLE_WALK_HANDLE_FAULT even when the
early termination semantics are desirable on the fault handling path.
Rather than complicate the pKVM hypercall interface, invert the flag so
that the whole thing can be simplified and only pass the new flag
('KVM_PGTABLE_WALK_IGNORE_EAGAIN') from the wrprotect code.
Cc: Fuad Tabba <tabba@google.com>
Cc: Quentin Perret <qperret@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Fixes: fce886a60207 ("KVM: arm64: Plumb the pKVM MMU in KVM")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Link: https://msgid.link/20260105154939.11041-2-will@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
alloc_irq_table() contains a conditional check for a NULL iommu pointer
when computing the NUMA node, but the function dereferences iommu
in multiple places afterwards.
All callers ensure that a valid iommu pointer is passed in, and a NULL
iommu is not expected by the current callers. Remove the incorrect
NULL check to make the assumptions consistent and address the Smatch
warning.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202512191724.meqJENXe-lkp@intel.com/
Signed-off-by: Rakuram Eswaran <rakuram.e96@gmail.com>
Reviewed-by: Ankit Soni <Ankit.Soni@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Use LIST_HEAD() to declare and initialize the 'mappings' list head in
iommu_create_device_direct_mappings() instead of separate declaration and
INIT_LIST_HEAD(). This simplifies the code by combining declaration and
initialization into a single idiomatic form, improving readability without
changing functionality.
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The QUICC Engine provides interrupts for a few I/O ports. This is
handled via a separate interrupt ID and managed via a triplet of
dedicated registers hosted by the SoC.
Implement an interrupt driver for it so that those IRQs can then
be linked to the related GPIOs.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/7708243d6cca21004de8b3da87369c06dbee3848.1767804922.git.chleroy@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
[moved from bindings/soc/fsl/cpm_qe/ to bindings/interrupt-controller/ while applying]
|
|
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled.
Signed-off-by: Ankit Soni <Ankit.Soni@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The QUICC Engine provides interrupts for a few I/O ports. This is
handled via a separate interrupt ID and managed via a triplet of
dedicated registers hosted by the SoC.
Implement an interrupt driver for it so that those IRQs can then
be linked to the related GPIOs.
Link: https://lore.kernel.org/r/63f19db21a91729d91b3df336a56a7eb4206e561.1767804922.git.chleroy@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Now, as the page_ext holds count of IOMMU mappings, we can use it to
assert that any page allocated/freed is indeed not in the IOMMU.
The sanitizer doesn’t protect against mapping/unmapping during this
period. However, that’s less harmful as the page is not used by the
kernel.
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Using the new calls, use an atomic refcount to track how many times
a page is mapped in any of the IOMMUs.
For unmap we need to use iova_to_phys() to get the physical address
of the pages.
We use the smallest supported page size as the granularity of tracking
per domain.
This is important as it is possible to map pages and unmap them with
larger sizes (as in map_sg()) cases.
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Add calls for the new iommu debug config IOMMU_DEBUG_PAGEALLOC:
- iommu_debug_init: Enable the debug mode if configured by the user.
- iommu_debug_map: Track iommu pages mapped, using physical address.
- iommu_debug_unmap_begin: Track start of iommu unmap operation, with
IOVA and size.
- iommu_debug_unmap_end: Track the end of unmap operation, passing the
actual unmapped size versus the tracked one at unmap_begin.
We have to do the unmap_begin/end as once pages are unmapped we lose
the information of the physical address.
This is racy, but the API is racy by construction as it uses refcounts
and doesn't attempt to lock/synchronize with the IOMMU API as that will
be costly, meaning that possibility of false negative exists.
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Add a new config IOMMU_DEBUG_PAGEALLOC, which registers new data to
page_ext.
This config will be used by the IOMMU API to track pages mapped in
the IOMMU to catch drivers trying to free kernel memory that they
still map in their domains, causing all types of memory corruption.
This behaviour is disabled by default and can be enabled using
kernel cmdline iommu.debug_pagealloc.
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
gcc 8.5 on powerpc does not automatically inline these functions even
though they evaluate to constants in key cases. Since the constant
propagation is essential for some code elimination and built-time checks
this causes a build failure:
ERROR: modpost: "__pt_no_sw_bit" [drivers/iommu/generic_pt/fmt/iommu_amdv1.ko] undefined!
Caused by this:
if (pts_feature(&pts, PT_FEAT_DMA_INCOHERENT) &&
!pt_test_sw_bit_acquire(&pts,
SW_BIT_CACHE_FLUSH_DONE))
flush_writes_item(&pts);
Where pts_feature() evaluates to a constant false. Mark them as
__always_inline to force it to evaluate to a constant and trigger the code
elimination.
Fixes: 7c5b184db714 ("genpt: Generic Page Table base API")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512230720.9y9DtWIo-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The selftest now depends on the AMDv1 page table, however the selftest
kconfig itself is just an sub-option of the main IOMMUFD module kconfig.
This means it cannot be modular and so kconfig allowed a modular
IOMMU_PT_AMDV1 with a built in IOMMUFD. This causes link failures:
ld: vmlinux.o: in function `mock_domain_alloc_pgtable.isra.0':
selftest.c:(.text+0x12e8ad3): undefined reference to `pt_iommu_amdv1_init'
ld: vmlinux.o: in function `BSWAP_SHUFB_CTL':
sha1-avx2-asm.o:(.rodata+0xaa36a8): undefined reference to `pt_iommu_amdv1_read_and_clear_dirty'
ld: sha1-avx2-asm.o:(.rodata+0xaa36f0): undefined reference to `pt_iommu_amdv1_map_pages'
ld: sha1-avx2-asm.o:(.rodata+0xaa36f8): undefined reference to `pt_iommu_amdv1_unmap_pages'
ld: sha1-avx2-asm.o:(.rodata+0xaa3720): undefined reference to `pt_iommu_amdv1_iova_to_phys'
Adjust the kconfig to disable IOMMUFD_TEST if IOMMU_PT_AMDV1 is incompatible.
Fixes: e93d5945ed5b ("iommufd: Change the selftest to use iommupt instead of xarray")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512210135.freQWpxa-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The test doesn't build without it, dma-buf.h does not provide stub
functions if it is not enabled. Compilation can fail with:
ERROR:root:ld: vmlinux.o: in function `iommufd_test':
(.text+0x3b1cdd): undefined reference to `dma_buf_get'
ld: (.text+0x3b1d08): undefined reference to `dma_buf_put'
ld: (.text+0x3b2105): undefined reference to `dma_buf_export'
ld: (.text+0x3b211f): undefined reference to `dma_buf_fd'
ld: (.text+0x3b2e47): undefined reference to `dma_buf_move_notify'
Add the missing select.
Fixes: d2041f1f11dd ("iommufd/selftest: Add some tests for the dmabuf flow")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The kunit doesn't work since the below commit made GENERIC_PT
unselectable:
$ make ARCH=x86_64 O=build_kunit_x86_64 olddefconfig
ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
This is probably due to unsatisfied dependencies.
Missing: CONFIG_DEBUG_GENERIC_PT=y, CONFIG_IOMMUFD_TEST=y,
CONFIG_IOMMU_PT_X86_64=y, CONFIG_GENERIC_PT=y, CONFIG_IOMMU_PT_AMDV1=y,
CONFIG_IOMMU_PT_VTDSS=y, CONFIG_IOMMU_PT=y, CONFIG_IOMMU_PT_KUNIT_TEST=y
Also remove the unneeded CONFIG_IOMMUFD_TEST reference as the iommupt kunit
doesn't interact with iommufd, and it doesn't currently build for the
kunit due problems with DMA_SHARED buffer either.
Fixes: 01569c216dde ("genpt: Make GENERIC_PT invisible")
Fixes: 1dd4187f53c3 ("iommupt: Add a kunit test for Generic Page Table")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Do not crash when a report has no fields.
Fake USB gadgets can send their own HID report descriptors and can define report
structures without valid fields. This can be used to crash the kernel over USB.
Cc: stable@vger.kernel.org
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, pm->input_ep82 stays
NULL, which leads to a crash later.
This does not happen with the real device, but can be provoked by imposing as
one.
Cc: stable@vger.kernel.org
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
PCIe permits a device to ignore ATS invalidation TLPs while processing a
reset. This creates a problem visible to the OS where an ATS invalidation
command will time out: e.g. an SVA domain will have no coordination with a
reset event and can racily issue ATS invalidations to a resetting device.
The PCIe r6.0, sec 10.3.1 IMPLEMENTATION NOTE recommends SW to disable and
block ATS before initiating a Function Level Reset. It also mentions that
other reset methods could have the same vulnerability as well.
The IOMMU subsystem provides pci_dev_reset_iommu_prepare/done() callback
helpers for this matter. Use them in all the existing reset functions.
This will attach the device to its iommu_group->blocking_domain during the
device reset, so as to allow IOMMU driver to:
- invoke pci_disable_ats() and pci_enable_ats(), if necessary
- wait for all ATS invalidations to complete
- stop issuing new ATS invalidations
- fence any incoming ATS queries
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
PCIe permits a device to ignore ATS invalidation TLPs while processing a
reset. This creates a problem visible to the OS where an ATS invalidation
command will time out. E.g. an SVA domain will have no coordination with a
reset event and can racily issue ATS invalidations to a resetting device.
The OS should do something to mitigate this as we do not want production
systems to be reporting critical ATS failures, especially in a hypervisor
environment. Broadly, OS could arrange to ignore the timeouts, block page
table mutations to prevent invalidations, or disable and block ATS.
The PCIe r6.0, sec 10.3.1 IMPLEMENTATION NOTE recommends SW to disable and
block ATS before initiating a Function Level Reset. It also mentions that
other reset methods could have the same vulnerability as well.
Provide a callback from the PCI subsystem that will enclose the reset and
have the iommu core temporarily change all the attached RID/PASID domains
group->blocking_domain so that the IOMMU hardware would fence any incoming
ATS queries. And IOMMU drivers should also synchronously stop issuing new
ATS invalidations and wait for all ATS invalidations to complete. This can
avoid any ATS invaliation timeouts.
However, if there is a domain attachment/replacement happening during an
ongoing reset, ATS routines may be re-activated between the two function
calls. So, introduce a new resetting_domain in the iommu_group structure
to reject any concurrent attach_dev/set_dev_pasid call during a reset for
a concern of compatibility failure. Since this changes the behavior of an
attach operation, update the uAPI accordingly.
Note that there are two corner cases:
1. Devices in the same iommu_group
Since an attachment is always per iommu_group, this means that any
sibling devices in the iommu_group cannot change domain, to prevent
race conditions.
2. An SR-IOV PF that is being reset while its VF is not
In such case, the VF itself is already broken. So, there is no point
in preventing PF from going through the iommu reset.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
There is a need to stage a resetting PCI device to temporarily the blocked
domain and then attach back to its previously attached domain after reset.
This can be simply done by keeping the "previously attached domain" in the
iommu_group->domain pointer while adding an iommu_group->resetting_domain,
which gives troubles to IOMMU drivers using the iommu_get_domain_for_dev()
for a device's physical domain in order to program IOMMU hardware.
And in such for-driver use cases, the iommu_group->mutex must be held, so
it doesn't fit in external callers that don't hold the iommu_group->mutex.
Introduce a new iommu_driver_get_domain_for_dev() helper, exclusively for
driver use cases that hold the iommu_group->mutex, to separate from those
external use cases.
Add a lockdep_assert_not_held to the existing iommu_get_domain_for_dev()
and highlight that in a kdoc.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This function can only be called on the default_domain. Trivally pass it
in. In all three existing cases, the default domain was just attached to
the device.
This avoids iommu_setup_dma_ops() calling iommu_get_domain_for_dev() that
will be used by external callers.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The iommu_deferred_attach() function invokes __iommu_attach_device(), but
doesn't hold the group->mutex like other __iommu_attach_device() callers.
Though there is no pratical bug being triggered so far, it would be better
to apply the same locking to this __iommu_attach_device(), since the IOMMU
drivers nowaday are more aware of the group->mutex -- some of them use the
iommu_group_mutex_assert() function that could be potentially in the path
of an attach_dev callback function invoked by the __iommu_attach_device().
Worth mentioning that the iommu_deferred_attach() will soon need to check
group->resetting_domain that must be locked also.
Thus, grab the mutex to guard __iommu_attach_device() like other callers.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, msc->input stays NULL,
leading to a crash at a later time.
Detect this condition in the input_configured() hook and reject the device.
This is not supposed to happen with actual magic mouse devices, but can be
provoked by imposing as a magic mouse USB device.
Cc: stable@vger.kernel.org
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This commit adds support for the PDP RiffMaster and the CRKD Gibson SG
in both their PS4 and PS5 modes.
These devices aren't mapped correctly without these changes, they also
lack support for their whammy and tilt functionality which this patch
adds support for by binding them to the left and right triggers.
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This patch implements support for the fn lock key on the 2025 Asus
ProArt P16. The implementation for this is based on how fn lock is
implemented in the hid-lenovo driver.
Signed-off-by: Connor Belli <connorbelli2003@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Errors in init must be reported back or we'll
follow a NULL pointer the first time FF is used.
Fixes: 20eb127906709 ("hid: force feedback driver for PantherLord USB/PS2 2in1 Adapter")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Some games (mainly observed with Kylotonn's WRC Serises) set trigger
button to a random value, or always the same one, out of range.
I observed 307 and other values but, for example, my Moza R9 only
exposes 128 buttons AND it's trigger button field is 8-bit. This causes
errors to appear in dmesg.
Only set the trigger button and trigger interval in the trigger button
is in range of the field.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Lenovo Yoga Book 9i is a dual-screen laptop, with a single composite
USB device providing both touch and tablet interfaces for both screens.
All inputs report through a single device, differentiated solely by report
numbers. As there is no way for udev to differentiate the inputs based on
USB vendor/product ID or interface numbers, custom naming is required to
match against for downstream configuration. A firmware bug also results
in an erroneous InRange message report being received after the stylus
leaves proximity, blocking later touch events. Add required quirks for
Gen 8 to Gen 10 models, including a new quirk providing for custom input
device naming and dropping erroneous InRange reports.
Signed-off-by: Brian Howard <blhoward2@gmail.com>
Tested-by: Brian Howard <blhoward2@gmail.com>
Tested-by: Kris Fredrick <linux.baguette800@slmail.me>
Reported-by: Andrei Shumailov <gentoo1993@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220386
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The ps_gamepad_create() function calls input_ff_create_memless()
without verifying its return value, which can lead to incorrect
behavior or potential crashes when FF effects are triggered.
Add a check for the return value of input_ff_create_memless().
Fixes: 51151098d7ab ("HID: playstation: add DualSense classic rumble support.")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The SoNiX KN85 keyboard identifies as the "Apple, Inc. Aluminium
Keyboard" and is not recognized as a non-apple keyboard. Adding "SoNiX
KN85 Keyboard" to the list of non-apple keyboards fixes the function
keys.
Signed-off-by: Joey Bednar <linux@joeybednar.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This patch adds support for handling the side buttons
on the RAPOO 0x2015 wireless mouse. These buttons were
previously not generating input events due to missing
driver logic.
The new code handles raw HID input report with Report
ID 1 and maps the side buttons to KEY_BACK and KEY_FORWARD
using the input subsystem.
Tested on a RAPOO mouse with USB ID 24AE:2015.
Signed-off-by: Nguyen Dinh Dang Duong <dangduong31205@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Rework the AMX test's #NM handling to use kvm_asm_safe() to verify an #NM
actually occurs. As is, a completely missing #NM could go unnoticed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The host is allowed to set FPU state that includes a disabled
xstate component. Check that this does not cause bad effects.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rework the guest=>host syncs in the AMX test to use named actions instead
of arbitrary, incrementing numbers. The "stage" of the test has no real
meaning, what matters is what action the test wants the host to perform.
The incrementing numbers are somewhat helpful for triaging failures, but
fully debugging failures almost always requires a much deeper dive into
the test (and KVM).
Using named actions not only makes it easier to extend the test without
having to shift all sync point numbers, it makes the code easier to read.
[Commit message by Sean Christopherson]
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When loading guest XSAVE state via KVM_SET_XSAVE, and when updating XFD in
response to a guest WRMSR, clear XFD-disabled features in the saved (or to
be restored) XSTATE_BV to ensure KVM doesn't attempt to load state for
features that are disabled via the guest's XFD. Because the kernel
executes XRSTOR with the guest's XFD, saving XSTATE_BV[i]=1 with XFD[i]=1
will cause XRSTOR to #NM and panic the kernel.
E.g. if fpu_update_guest_xfd() sets XFD without clearing XSTATE_BV:
------------[ cut here ]------------
WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#29: amx_test/848
Modules linked in: kvm_intel kvm irqbypass
CPU: 29 UID: 1000 PID: 848 Comm: amx_test Not tainted 6.19.0-rc2-ffa07f7fd437-x86_amx_nm_xfd_non_init-vm #171 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:exc_device_not_available+0x101/0x110
Call Trace:
<TASK>
asm_exc_device_not_available+0x1a/0x20
RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
switch_fpu_return+0x4a/0xb0
kvm_arch_vcpu_ioctl_run+0x1245/0x1e40 [kvm]
kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x62/0x940
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
This can happen if the guest executes WRMSR(MSR_IA32_XFD) to set XFD[18] = 1,
and a host IRQ triggers kernel_fpu_begin() prior to the vmexit handler's
call to fpu_update_guest_xfd().
and if userspace stuffs XSTATE_BV[i]=1 via KVM_SET_XSAVE:
------------[ cut here ]------------
WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#14: amx_test/867
Modules linked in: kvm_intel kvm irqbypass
CPU: 14 UID: 1000 PID: 867 Comm: amx_test Not tainted 6.19.0-rc2-2dace9faccd6-x86_amx_nm_xfd_non_init-vm #168 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:exc_device_not_available+0x101/0x110
Call Trace:
<TASK>
asm_exc_device_not_available+0x1a/0x20
RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
fpu_swap_kvm_fpstate+0x6b/0x120
kvm_load_guest_fpu+0x30/0x80 [kvm]
kvm_arch_vcpu_ioctl_run+0x85/0x1e40 [kvm]
kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x62/0x940
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
The new behavior is consistent with the AMX architecture. Per Intel's SDM,
XSAVE saves XSTATE_BV as '0' for components that are disabled via XFD
(and non-compacted XSAVE saves the initial configuration of the state
component):
If XSAVE, XSAVEC, XSAVEOPT, or XSAVES is saving the state component i,
the instruction does not generate #NM when XCR0[i] = IA32_XFD[i] = 1;
instead, it operates as if XINUSE[i] = 0 (and the state component was
in its initial state): it saves bit i of XSTATE_BV field of the XSAVE
header as 0; in addition, XSAVE saves the initial configuration of the
state component (the other instructions do not save state component i).
Alternatively, KVM could always do XRSTOR with XFD=0, e.g. by using
a constant XFD based on the set of enabled features when XSAVEing for
a struct fpu_guest. However, having XSTATE_BV[i]=1 for XFD-disabled
features can only happen in the above interrupt case, or in similar
scenarios involving preemption on preemptible kernels, because
fpu_swap_kvm_fpstate()'s call to save_fpregs_to_fpstate() saves the
outgoing FPU state with the current XFD; and that is (on all but the
first WRMSR to XFD) the guest XFD.
Therefore, XFD can only go out of sync with XSTATE_BV in the above
interrupt case, or in similar scenarios involving preemption on
preemptible kernels, and it we can consider it (de facto) part of KVM
ABI that KVM_GET_XSAVE returns XSTATE_BV[i]=0 for XFD-disabled features.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 820a6ee944e7 ("kvm: x86: Add emulation for IA32_XFD", 2022-01-14)
Signed-off-by: Sean Christopherson <seanjc@google.com>
[Move clearing of XSTATE_BV from fpu_copy_uabi_to_guest_fpstate
to kvm_vcpu_ioctl_x86_set_xsave. - Paolo]
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fix from Gao Xiang:
- Don't increase s_stack_depth which caused regressions in some
composefs mount setups (EROFS + ovl^2)
Instead just allow one extra unaccounted fs stacking level for
straightforward cases.
* tag 'erofs-for-6.19-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: don't bother with s_stack_depth increasing for now
|
|
Previously, commit d53cd891f0e4 ("erofs: limit the level of fs stacking
for file-backed mounts") bumped `s_stack_depth` by one to avoid kernel
stack overflow when stacking an unlimited number of EROFS on top of
each other.
This fix breaks composefs mounts, which need EROFS+ovl^2 sometimes
(and such setups are already used in production for quite a long time).
One way to fix this regression is to bump FILESYSTEM_MAX_STACK_DEPTH
from 2 to 3, but proving that this is safe in general is a high bar.
After a long discussion on GitHub issues [1] about possible solutions,
one conclusion is that there is no need to support nesting file-backed
EROFS mounts on stacked filesystems, because there is always the option
to use loopback devices as a fallback.
As a quick fix for the composefs regression for this cycle, instead of
bumping `s_stack_depth` for file backed EROFS mounts, we disallow
nesting file-backed EROFS over EROFS and over filesystems with
`s_stack_depth` > 0.
This works for all known file-backed mount use cases (composefs,
containerd, and Android APEX for some Android vendors), and the fix is
self-contained.
Essentially, we are allowing one extra unaccounted fs stacking level of
EROFS below stacking filesystems, but EROFS can only be used in the read
path (i.e. overlayfs lower layers), which typically has much lower stack
usage than the write path.
We can consider increasing FILESYSTEM_MAX_STACK_DEPTH later, after more
stack usage analysis or using alternative approaches, such as splitting
the `s_stack_depth` limitation according to different combinations of
stacking.
Fixes: d53cd891f0e4 ("erofs: limit the level of fs stacking for file-backed mounts")
Reported-and-tested-by: Dusty Mabe <dusty@dustymabe.com>
Reported-by: Timothée Ravier <tim@siosm.fr>
Closes: https://github.com/coreos/fedora-coreos-tracker/issues/2087 [1]
Reported-by: "Alekséi Naidénov" <an@digitaltide.io>
Closes: https://lore.kernel.org/r/CAFHtUiYv4+=+JP_-JjARWjo6OwcvBj1wtYN=z0QXwCpec9sXtg@mail.gmail.com
Acked-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Alexander Larsson <alexl@redhat.com>
Reviewed-and-tested-by: Sheng Yong <shengyong1@xiaomi.com>
Reviewed-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
While debugging a different issue [1], the following relocation was
noticed in the rust_binder.ko file:
R_AARCH64_CALL26 _RNvXNtNtNtCsdfZWD8DztAw_6kernel4sync4lock8spinlockNtB2_15SpinLockBackendNtB4_7Backend6unlock
This relocation (and a similar one for lock) occurred many times
throughout the module. That is not really useful because all this
function does is call spin_unlock(), so what we actually want here is
that a call to spin_unlock() dirctly is generated in favor of this
wrapper method.
Thus, mark these methods inline.
[boqun: Reword the commit message a bit]
Link: https://lore.kernel.org/p/20251111-binder-fix-list-remove-v1-0-8ed14a0da63d@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20251218-inline-lock-unlock-v2-1-fbadac8bd61b@google.com
|
|
Add RCU protection on (struct macvlan_source_entry)->vlan.
Whenever macvlan_hash_del_source() is called, we must clear
entry->vlan pointer before RCU grace period starts.
This allows macvlan_forward_source() to skip over
entries queued for freeing.
Note that macvlan_dev are already RCU protected, as they
are embedded in a standard netdev (netdev_priv(ndev)).
Fixes: 79cf79abce71 ("macvlan: add source mode")
Reported-by: syzbot+7182fbe91e58602ec1fe@syzkaller.appspotmail.com
https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260108133651.1130486-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing entries in netdev_lock_type[] and netdev_lock_name[] :
CAN, MCTP, RAWIP, CAIF, IP6GRE, 6LOWPAN, NETLINK, VSOCKMON,
IEEE802154_MONITOR.
Also add a WARN_ONCE() in netdev_lock_pos() to help future bug hunting
next time a protocol is added without updating these arrays.
Fixes: 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260108093244.830280-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Blamed commit did not take care of VLAN encapsulations
as spotted by syzbot [1].
Use skb_vlan_inet_prepare() instead of pskb_inet_may_pull().
[1]
BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321
__INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321
ip6ip6_dscp_ecn_decapsulate+0x16f/0x1b0 net/ipv6/ip6_tunnel.c:729
__ip6_tnl_rcv+0xed9/0x1b50 net/ipv6/ip6_tunnel.c:860
ip6_tnl_rcv+0xc3/0x100 net/ipv6/ip6_tunnel.c:903
gre_rcv+0x1529/0x1b90 net/ipv6/ip6_gre.c:-1
ip6_protocol_deliver_rcu+0x1c89/0x2c60 net/ipv6/ip6_input.c:438
ip6_input_finish+0x1f4/0x4a0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x9c/0x330 net/ipv6/ip6_input.c:500
ip6_mc_input+0x7ca/0xc10 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x958/0x990 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:318 [inline]
ipv6_rcv+0xf1/0x3c0 net/ipv6/ip6_input.c:311
__netif_receive_skb_one_core net/core/dev.c:6139 [inline]
__netif_receive_skb+0x1df/0xac0 net/core/dev.c:6252
netif_receive_skb_internal net/core/dev.c:6338 [inline]
netif_receive_skb+0x57/0x630 net/core/dev.c:6397
tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485
tun_get_user+0x5c0e/0x6c60 drivers/net/tun.c:1953
tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0xbe2/0x15d0 fs/read_write.c:686
ksys_write fs/read_write.c:738 [inline]
__do_sys_write fs/read_write.c:749 [inline]
__se_sys_write fs/read_write.c:746 [inline]
__x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746
x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4960 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_node_noprof+0x9e7/0x17a0 mm/slub.c:5315
kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:586
__alloc_skb+0x805/0x1040 net/core/skbuff.c:690
alloc_skb include/linux/skbuff.h:1383 [inline]
alloc_skb_with_frags+0xc5/0xa60 net/core/skbuff.c:6712
sock_alloc_send_pskb+0xacc/0xc60 net/core/sock.c:2995
tun_alloc_skb drivers/net/tun.c:1461 [inline]
tun_get_user+0x1142/0x6c60 drivers/net/tun.c:1794
tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0xbe2/0x15d0 fs/read_write.c:686
ksys_write fs/read_write.c:738 [inline]
__do_sys_write fs/read_write.c:749 [inline]
__se_sys_write fs/read_write.c:746 [inline]
__x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746
x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 6465 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(none)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Fixes: 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()")
Reported-by: syzbot+d4dda070f833dc5dc89a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/695e88b2.050a0220.1c677c.036d.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260107163109.4188620-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Motor Control PWM shares an interrupt line with TIMER4 on MIC interrupt
controller, the interrupt serves as period (timer limit), pulse-width (match)
and capture event interrupt.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
|
|
Motor Control PWM depends on its own supply clock, the clock gate control
is present in TIMCLK_CTRL1 register.
Fixes: b7d41c937ed7 ("ARM: LPC32xx: Add the motor PWM to base dts file")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Kill unlikely checks for blk-rq-qos. These checks are really
all-or-nothing, either the branch is taken all the time, or it's not.
Depending on the configuration, either one of those cases may be
true. Just remove the annotation
- Fix for merging bios with different app tags set
- Fix for a recently introduced slowdown due to RCU synchronization
- Fix for a status change on loop while it's in use, and then a later
fix for that fix
- Fix for the async partition scanning in ublk
* tag 'block-6.19-20260109' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
ublk: fix use-after-free in ublk_partition_scan_work
blk-mq: avoid stall during boot due to synchronize_rcu_expedited
loop: add missing bd_abort_claiming in loop_set_status
block: don't merge bios with different app_tags
blk-rq-qos: Remove unlikely() hints from QoS checks
loop: don't change loop device under exclusive opener in loop_set_status
|
|
The GMAC is coherent on RK3576, so allow the "dma-coherent" property.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260108225318.1325114-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
