| Age | Commit message (Collapse) | Author |
|---|
|
When the test-pattern control gets set to 0 (Disabled) 0 should be written
to the test-pattern register, rather then doing nothing.
Fixes: 0827b58dabff ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
v4l2_subdev_state_get_format()
The 2 argument version of v4l2_subdev_state_get_format() takes the pad
as second argument, not the stream.
Fixes: bc0e8d91feec ("media: v4l: subdev: Switch to stream-aware state functions")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add missing v4l2_subdev_cleanup() calls to cleanup after
v4l2_subdev_init_finalize().
Fixes: 0827b58dabff ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
A analogue maximum gain of 0xffff / 65525 seems unlikely and testing
indeed shows that the gain control wraps-around at 16383, so set the
maximum gain to 0x3fff / 16383.
The minimum gain of 0x100 is correct. Setting bits 8-11 to 0x0 results
in the same gain values as setting these bits to 0x1, with bits 0-7
still increasing the gain when going from 0x000 - 0x0ff in the exact
same range as when going from 0x100 - 0x1ff.
Fixes: 0827b58dabff ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
[Sakari Ailus: mention analogue gain and update the limit from 4096.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
CSI lanes are double-clocked so with a single lane at 400MHZ the resulting
pixel-rate for 10-bits pixels is 400 MHz * 2 / 10 = 80 MHz, not 40 MHz.
This also matches with the observed frame-rate of 60 fps with the default
vblank setting: 80000000 / (1488 * 896) = 60.
Fixes: 0827b58dabff ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
During sensor calibration I noticed that with the hflip control set
to false/disabled the image was mirrored.
So it seems that the horizontal flip control is inverted and needs to
be set to 1 to not flip (just like the similar problem recently fixed
on the ov08x40 sensor).
Invert the hflip control to fix the sensor mirroring by default.
As the comment above the newly added OV01A10_MEDIA_BUS_FMT define explains
the control being inverted also means that the native Bayer-order of
the sensor actually is GBRG not BGGR, but so as to not break userspace
the Bayer-order is kept at BGGR.
Fixes: 0827b58dabff ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Implement internal buffer count and size calculations for AV1 decoder
for all the buffer types required by the AV1 decoder, including BIN,
COMV, PERSIST, LINE, and PARTIAL.
This ensures the hardware decoder has properly allocated memory for AV1
decoding operations, enabling correct AV1 video playback.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Defining platform specific capabilities specific to AV1 decoder.
Set and subscribe to manadatory properties to firmware for AV1.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Extend iris decoder driver to support format V4L2_PIX_FMT_AV1.
This change updates the format enumeration (VIDIOC_ENUM_FMT)
and allows setting AV1 format via VIDIOC_S_FMT for gen2 and beyond.
Gen1 iris hardware decoder does not support AV1 format.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add a descriptive string for the AV1 pixel format to v4l_fill_fmtdesc(),
enabling proper reporting of AV1 support via VIDIOC_ENUM_FMT.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Introduce a new pixel format, V4L2_PIX_FMT_AV1, to the
Video4Linux2(V4L2) API. This format is intended for AV1
bitstreams in stateful decoding/encoding workflows.
The fourcc code 'AV10' is used to distinguish
this format from the existing V4L2_PIX_FMT_AV1_FRAME,
which is used for stateless AV1 decoder implementation.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
This reverts commit 27ccc44a511b0cd76dc607e2a4893b876192ee1b.
A user has reported that the Zoom Video Conferencing tool is not capable
of handling invalid frames. Due to this, he has to continue using this
parameter.
We will keep working with Zoom so they can handle invalid frames
correctly, but for this cycle the safest option is to revert this
parameter drop.
Fixes: 27ccc44a511b ("media: uvcvideo: Remove nodrop parameter")
Reported-by: Ralf Jung <post@ralfj.de>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1121718
Closes: https://lore.kernel.org/linux-media/uboug5ectzm4s32yfgopjbcxq2uhsoc4kluaby7a4b7nzfjave@boco7oocnftr/
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add release_mem_region() if ioremap() fails to release the memory
region obtained by cx25821_get_resources().
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
tegra20_vip_soc is shared across translation units but is currently
declared via an extern in vip.c. Move the declaration to vip.h so users get
it via the header and we avoid extern declarations in .c files, matching
the pattern already used by tegra20_vi_soc and tegra210_vi_soc.
Suggested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Sparse warns that tegra210_csi_soc is not declared in tegra210.c.
The symbol is referenced from csi.c, so it must remain global. Move the
declaration to csi.h so users see it via the header and avoid extern
declarations in .c files.
SPARSE: drivers/staging/media/tegra-video/tegra210.c:1214:28: warning:
symbol 'tegra210_csi_soc' was not declared. Should it be static?
No functional change intended.
Suggested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In one of the error paths in tw9906_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path.
Cc: stable@vger.kernel.org
Fixes: a000e9a02b58 ("[media] tw9906: add Techwell tw9906 video decoder")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In one of the error paths in tw9903_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path.
Cc: stable@vger.kernel.org
Fixes: 0890ec19c65d ("[media] tw9903: add new tw9903 video decoder")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
When pvr2_send_request_ex() submits a write URB successfully but fails to
submit the read URB (e.g. returns -ENOMEM), it returns immediately without
waiting for the write URB to complete. Since the driver reuses the same
URB structure, a subsequent call to pvr2_send_request_ex() attempts to
submit the still-active write URB, triggering a 'URB submitted while
active' warning in usb_submit_urb().
Fix this by ensuring the write URB is unlinked and waited upon if the read
URB submission fails.
Reported-by: syzbot+405dcd13121ff75a9e16@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=405dcd13121ff75a9e16
Signed-off-by: Szymon Wilczek <szymonwilczek@gmx.com>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Use usleep_range instead of udelay to fix checkpatch warning.
Signed-off-by: Preyas Sharma <preyas17@zohomail.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: added commit message]
|
|
Use usleep_range instead of msleep to fix checkpatch warnings.
Signed-off-by: Preyas Sharma <preyas17@zohomail.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: added commit message]
|
|
Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type
(literal "1" is an "int") could end up being shifted beyond 32 bits,
so instrumentation was added (and due to the double is_tw286x() call
seen via inlining), Clang decides the second one must now be undefined
behavior and elides the rest of the function[1]. This is a known problem
with Clang (that is still being worked on), but we can avoid the entire
problem by actually checking the existing max chip ID, and now there is
no runtime instrumentation added at all since everything is known to be
within bounds.
Additionally use an unsigned value for the shift to remove the
instrumentation even without the explicit bounds checking.
Link: https://github.com/ClangBuiltLinux/linux/issues/2144 [1]
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix checkpatch warning for is_tw286x]
|
|
Downstream version of RK3588 U-Boot uses customized TF-A that remaps
HDMIRX hardware interrupt, routing it via firmware that isn't supported
by upstream driver.
Detect broken interrupt and print a clarifying error message about a need
to use open-source TF-A with this driver.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In error path, add cx25821_alsa_dma_unmap() to release the
resource acquired by cx25821_alsa_dma_map()
Fixes: 8d8e6d6005de ("[media] cx28521: drop videobuf abuse in cx25821-alsa")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In error path, add cx23885_alsa_dma_unmap() to release the
resource acquired by cx23885_alsa_dma_map().
Fixes: 9529a4b0cf49 ("[media] cx23885: drop videobuf abuse in cx23885-alsa")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In error path, add cx88_alsa_dma_unmap() to release
resource acquired by cx88_alsa_dma_map().
Fixes: b2c75abde0de ("[media] cx88: drop videobuf abuse in cx88-alsa")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix a memory leak in usb_keene_probe(). The v4l2 control handler is
initialized and controls are added, but if v4l2_device_register() or
video_register_device() fails afterward, the handler was never freed,
leaking memory.
Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure
the control handler is properly freed for all error paths after it is
initialized.
Reported-by: syzbot+a41b73dce23962a74c72@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a41b73dce23962a74c72
Fixes: 1bf20c3a0c61 ("[media] radio-keene: add a driver for the Keene FM Transmitter")
Cc: stable@vger.kernel.org
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The ADV7280-M may internally convert interlaced video input to
progressive video. If this mode is enabled, the ADV7280-M delivers
progressive video frames at the field rate of 50 fields per second (PAL)
or 60 fields per second (NTSC).
Fix the reported frame interval if progressive video is enabled.
Signed-off-by: Thorsten Schmelzer <tschmelzer@topcon.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The g_register and s_register callbacks are useful for debugging the
adv7180.
Implement the callbacks to expose the register debugging to userspace.
Signed-off-by: Thorsten Schmelzer <tschmelzer@topcon.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Depending on other devices on the i2c bus, using a non-default address
for the CSI and VPP devices may be necessary.
Replace calls to i2c_new_dummy_device with i2c_new_ancillary_device,
which can directly use an i2c address from the device tree.
Program the actual addresses of the sub-devices when configuring the
chip.
Signed-off-by: Thorsten Schmelzer <tschmelzer@topcon.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Different variants of the ADV7280 chip have up to three register maps.
The availability of the CSI and VPP register maps depends on the chip
variant. The address of the additional register maps depends on the
board design and other chips on the I2C but. They may be programmed via
registers in the main register map.
Allow to specify the addresses of the VPP and CSI register maps in the
device tree to solve I2C address conflicts on a board level.
The CSI and VPP register maps are always optional to allow backwards
compatibility with existing device trees which may rely on the default
address.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Dram hang could happen in the steps below:
1. start capture/compression
2. out-of-lock watchdog raise irq because of res-change.
3. aspeed_video_irq_res_change do clk-off
At step3, capture/compression could be not accomplished yet. If clk-off
in the middle of video operation, dram controller could hang at ast2500.
Use reset rather than clk-off/on to avoid this problem.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The state object allocated by __v4l2_subdev_state_alloc() must be freed
with __v4l2_subdev_state_free() when it is no longer needed.
In __tegra_channel_try_format(), two error paths return directly after
v4l2_subdev_call() fails, without freeing the allocated 'sd_state'
object. This violates the requirement and causes a memory leak.
Fix this by introducing a cleanup label and using goto statements in the
error paths to ensure that __v4l2_subdev_state_free() is always called
before the function returns.
Fixes: 56f64b82356b7 ("media: tegra-video: Use zero crop settings if subdev has no get_selection")
Fixes: 1ebaeb09830f3 ("media: tegra-video: Add support for external sensor capture")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Avoid 'strlen()'/'kmalloc()'/'snprintf()' sequence by using
the convenient 'kasprintf()' in 'v4l2_m2m_register_entity()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The existing 'dprintk' macro used an unwrapped 'if' statement which was
flagged by checkpatch, but instead of wrapping it, the debug handling
can be simplified.
This patch removes the 'dprintk' macro entirely and replaces all its
usages with v4l2_info() helper. The unused 'PREFIX' macro is also
removed.
Signed-off-by: Shrikant Raskar <raskar.shree97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Commit fbf97d6c1dd4 ("dt-bindings: media: Convert MediaTek mt8173-mdp
bindings to DT schema") renames mediatek-mdp.txt to
mediatek,mt8173-mdp.yaml as part of this dt-binding conversion, but misses
to adjust the file entry in MEDIATEK MDP DRIVER.
Adjust the file entry after the conversion.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Intra_only frame could be considered as a key frame so Instantaneous
Decoding Refresh (IDR) flag must be set of the both case and not only
for key frames.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reported-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Fixes: 727a400686a2c ("media: verisilicon: Add Rockchip AV1 decoder")
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Renesas RZ/T2H (R9A09G077) and Renesas RZ/N2H (R9A09G087) SoCs have
IRQ-capable pins handled by the ICU, which forwards them to the GIC.
The ICU supports 16 IRQ lines, the pins map to these lines arbitrarily,
and the mapping is not configurable.
Add a GPIO IRQ chip to the pin controller that can be used to configure
these pins as IRQ lines.
The pin controller places the requested pins into IRQ function,
disabling GPIO mode. A hierarchical IRQ domain is used to forward other
functionality to the parent IRQ domain, the ICU. The ICU does level
translation and then forwards other functionality to the GIC.
Wakeup capability is implemented by placing the entire pin controller on
the wakeup path if any pins are requested to be wakeup-capable.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260109143910.645628-2-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
desc_set_defaults() has a loop to clear the per-cpu counters kstats_irq.
This is only needed in free_desc(), which is used with non-sparse IRQs so
that the interrupt descriptor can be recycled. For newly allocated
descriptors, the memory comes from alloc_percpu() and is already zeroed
out.
Move the loop to free_desc() to avoid wasting time unnecessarily.
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260112083234.2665832-1-lrizzo@google.com
|
|
In blamed commit, I added a check against the temporary queue
built in __dev_xmit_skb(). Idea was to drop packets early,
before any spinlock was acquired.
if (unlikely(defer_count > READ_ONCE(q->limit))) {
kfree_skb_reason(skb, SKB_DROP_REASON_QDISC_DROP);
return NET_XMIT_DROP;
}
It turned out that HTB Qdisc has a zero q->limit.
HTB limits packets on a per-class basis.
Some of our tests became flaky.
Add a new sysctl : net.core.qdisc_max_burst to control
how many packets can be stored in the temporary lockless queue.
Also add a new QDISC_BURST_DROP drop reason to better diagnose
future issues.
Thanks Neal !
Fixes: 100dfa74cad9 ("net: dev_queue_xmit() llist adoption")
Reported-and-bisected-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260107104159.3669285-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The switch from devm_kzalloc() + drm_panel_init() to
devm_drm_panel_alloc() introduced a regression.
Several panel descriptors do not set connector_type. For those panels,
panel_simple_probe() used to compute a connector type (currently DPI as a
fallback) and pass that value to drm_panel_init(). After the conversion
to devm_drm_panel_alloc(), the call unconditionally used
desc->connector_type instead, ignoring the computed fallback and
potentially passing DRM_MODE_CONNECTOR_Unknown, which
drm_panel_bridge_add() does not allow.
Move the connector_type validation / fallback logic before the
devm_drm_panel_alloc() call and pass the computed connector_type to
devm_drm_panel_alloc(), so panels without an explicit connector_type
once again get the DPI default.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/stable/20251126-lcd_panel_connector_type_fix-v2-1-c15835d1f7cb%40microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251218-lcd_panel_connector_type_fix-v3-1-ddcea6d8d7ef@microchip.com
|
|
The connector type for the DataImage SCF0700C48GGU18 panel is missing and
devm_drm_panel_bridge_add() requires connector type to be set. This leads
to a warning and a backtrace in the kernel log and panel does not work:
"
WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8
"
The warning is triggered by a check for valid connector type in
devm_drm_panel_bridge_add(). If there is no valid connector type
set for a panel, the warning is printed and panel is not added.
Fill in the missing connector type to fix the warning and make
the panel operational once again.
Cc: stable@vger.kernel.org
Fixes: 97ceb1fb08b6 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260110152750.73848-1-marex@nabladev.com
|
|
For redirected interrupts, irq_chip_redirect_set_affinity() does not
update the effective affinity mask, which then triggers the warning in
irq_validate_effective_affinity(). Also, because the effective affinity
mask is empty, the cpumask_test_cpu(smp_processor_id(), m) condition in
demux_redirect_remote() is always false, and the interrupt is always
redirected, even if it's already running on the target CPU.
Set the effective affinity mask to be the same as the requested affinity
mask. It's worth noting that irq_do_set_affinity() filters out offline
CPUs before calling chip->irq_set_affinity() (unless `force` is set), so
the mask passed to irq_chip_redirect_set_affinity() is already filtered.
The solution is not ideal because it may lie about the effective
affinity of the demultiplexed ("child") interrupt. If the requested
affinity mask includes multiple CPUs, the effective affinity, in
reality, is the intersection between the requested mask and the
demultiplexing ("parent") interrupt's effective affinity mask, plus
the first CPU in the requested mask.
Accurately describing the effective affinity of the demultiplexed
interrupt is not trivial because it requires keeping track of the
demultiplexing interrupt's effective affinity. That is tricky in the
context of CPU hot(un)plugging, where interrupt migration ordering is
not guaranteed. The solution in the initial version of the fixed patch,
which stored the first CPU of the demultiplexing interrupt's effective
affinity in the `target_cpu` field, has its own drawbacks and
limitations.
Fixes: fcc1d0dabdb6 ("genirq: Add interrupt redirection infrastructure")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260112211402.2927336-1-rrendec@redhat.com
Closes: https://lore.kernel.org/all/44509520-f29b-4b8a-8986-5eae3e022eb7@nvidia.com/
|
|
Darrick J. Wong <djwong@kernel.org> says:
This patchset adds some generic helpers so that filesystems can report
errors to fsnotify in a standard way. Then it adapts iomap to use the
generic helpers so that any iomap-enabled filesystem can report I/O
errors through this mechanism as well. Finally, it makes XFS report
metadata errors through this mechanism in much the same way that ext4
does now.
These are a prerequisite for the XFS self-healing series which will
come at a later time.
* patches from https://patch.msgid.link/176826402528.3490369.2415315475116356277.stgit@frogsfrogsfrogs:
ext4: convert to new fserror helpers
xfs: translate fsdax media errors into file "data lost" errors when convenient
xfs: report fs metadata errors via fsnotify
iomap: report file I/O errors to the VFS
fs: report filesystem and file I/O errors to fsnotify
uapi: promote EFSCORRUPTED and EUCLEAN to errno.h
Link: https://patch.msgid.link/176826402528.3490369.2415315475116356277.stgit@frogsfrogsfrogs
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use the new fserror functions to report metadata errors to fsnotify.
Note that ext4 inconsistently passes around negative and positive error
numbers all over the codebase, so we force them all to negative for
consistency in what we report to fserror, and fserror ensures that only
positive error numbers are passed to fanotify, per the fanotify(7)
manpage.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/176826402693.3490369.5875002879192895558.stgit@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Translate fsdax persistent failure notifications into file data loss
events when it's convenient, aka when the inode is already incore.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/176826402673.3490369.1672039530408369208.stgit@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Report filesystem corruption problems to the fserror helpers so that
fsnotify can also convey metadata problems to userspace.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/176826402652.3490369.2609467634858507969.stgit@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Wire up iomap so that it reports all file read and write errors to the
VFS (and hence fsnotify) via the new fserror mechanism.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/176826402631.3490369.729008983502742314.stgit@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Create some wrapper code around struct super_block so that filesystems
have a standard way to queue filesystem metadata and file I/O error
reports to have them sent to fsnotify.
If a filesystem wants to provide an error number, it must supply only
negative error numbers. These are stored internally as negative
numbers, but they are converted to positive error numbers before being
passed to fanotify, per the fanotify(7) manpage. Implementations of
super_operations::report_error are passed the raw internal event data.
Note that we have to play some shenanigans with mempools and queue_work
so that the error handling doesn't happen outside of process context,
and the event handler functions (both ->report_error and fsnotify) can
handle file I/O error messages without having to worry about whatever
locks might be held. This asynchronicity requires that unmount wait for
pending events to clear.
Add a new callback to the superblock operations structure so that
filesystem drivers can themselves respond to file I/O errors if they so
desire. This will be used for an upcoming self-healing patchset for
XFS.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/176826402610.3490369.4378391061533403171.stgit@frogsfrogsfrogs
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Stop definining these privately and instead move them to the uapi
errno.h so that they become canonical instead of copy pasta.
Cc: linux-api@vger.kernel.org
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/176826402587.3490369.17659117524205214600.stgit@frogsfrogsfrogs
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
romfs_fill_super() ignores the return value of sb_set_blocksize(), which
can fail if the requested block size is incompatible with the block
device's configuration.
This can be triggered by setting a loop device's block size larger than
PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs
filesystem on that device.
When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the
device has logical_block_size=32768, bdev_validate_blocksize() fails
because the requested size is smaller than the device's logical block
size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and
continues mounting.
The superblock's block size remains at the device's logical block size
(32768). Later, when sb_bread() attempts I/O with this oversized block
size, it triggers a kernel BUG in folio_set_bh():
kernel BUG at fs/buffer.c:1582!
BUG_ON(size > PAGE_SIZE);
Fix by checking the return value of sb_set_blocksize() and failing the
mount with -EINVAL if it returns 0.
Reported-by: syzbot+9c4e33e12283d9437c25@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9c4e33e12283d9437c25
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://patch.msgid.link/20260113084037.1167887-1-kartikey406@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
