| Age | Commit message (Collapse) | Author |
|---|
|
There are many registers in common between all the modes.
Pull those out into one common table.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
To make comparisons of the mode registers easier, put the registers
for the binned and VGA modes in the same order as the others.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver did expose V4L2_CID_HBLANK, but as a READ_ONLY control.
The sensor only uses the HTS register to control the line length,
so convert this control to read/write, with the appropriate ranges.
Adopt the old fixed values as the minimum values permitted in each
mode to avoid issues of it not streaming.
This should allow exposure times up to ~3 seconds (up from ~1sec).
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
v4l2_async_register_subdev doesn't bind in lens or flash drivers,
but v4l2_async_register_subdev_sensor does.
Switch to using v4l2_async_register_subdev_sensor.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add missing controls for horizontal and vertical flipping.
The sensor readout mirrors in the horizontal direction by default (if
0x3821[1] = 0) which can make things unnecessarily difficult for
applications. The register table prior to this commit was setting that
bit explicitly, to achieve a normally oriented image.
Now that we have userspace controls for HFLIP, we keep the convention
and report the non-mirrored image (with 0x3821[1] = 1) as
horizontal_flip=0, and vice versa.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Co-developed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Parse device properties and register controls for them using the V4L2
fwnode properties helpers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Allow properties from video-interface-devices. The change is identical to
commit 08fbd355be3d ("media: dt-bindings: sony,imx219: Allow props from
video-interface-devices")
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver supported using GPIOs to control the shutdown line,
but no regulator control.
Add regulator hooks.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The OV5647 camera sensor takes 3 voltage supplies. So define those in
the bindings as optional regulators, to not break existing users.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The pixel rate for VGA (640x480) mode is configured in the mode's table
to be 58.333 MPix/s instead of 55 MPix/s, so fix it.
Fixes: 911f4516ee2b ("media: ov5647: Support V4L2_CID_PIXEL_RATE")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/CAPY8ntA2TCf9FuB6Nk%2BOn%2By6N_PMuYPAOAr3Yx8YESwe4skWvw@mail.gmail.com/
Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
As this sensor captures RAW bayer frames, the colorspace should be
V4L2_COLORSPACE_RAW instead of SRGB.
Fixes: a8df5af695a1 ("media: ov5647: Add SGGBR10_1X10 modes")
Cc: stable@vger.kernel.org
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Trial and error reveals that the minimum vblank value appears to be 24
(the OV5647 data sheet does not give any clues). This fixes streaming
lock-ups in full resolution mode.
Fixes: 2512c06441e3 ("media: ov5647: Support V4L2_CID_VBLANK control")
Cc: stable@vger.kernel.org
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The top offset in the pixel array is actually 6 (see page 3-1 of the
OV5647 data sheet).
Fixes: 14f70a3232aa ("media: ov5647: Add support for get_selection()")
Cc: stable@vger.kernel.org
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In ov5647_init_controls() we call v4l2_get_subdevdata, but it is
initialized by v4l2_i2c_subdev_init() in the probe, which currently
happens after init_controls(). This can result in a segfault if the
error condition is hit, and we try to access i2c_client, so fix the
order.
Fixes: 4974c2f19fd8 ("media: ov5647: Support gain, exposure and AWB controls")
Cc: stable@vger.kernel.org
Suggested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
ccs_validate_csi_data_format() will soon be needed elsewhere, above its
current location. Move it up.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In preparation for upcoming changes in the function, rename the out label
as err_pm_put. The purpose of the label is changed to match its name in
the next patch.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Prepare for using ccs_pm_get_init from locations earlier than its the
current place.
Also add a missing newline while at it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Streaming will have been stopped before the sensor is powered off, and so
sensor->streaming is also false already. Do not set it as part of the
runtime suspend callback.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Return -ENXIO from routing configuration errors other than generic IOCTL
argument validation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Document that -ENXIO is returned when the user tries to set a routing
configuration not supported by the hardware (or rather the driver). The
documentation details the exact cases of this, besides -EINVAL that is
already documented for VIDIOC_SUBDEV_S_ROUTING.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The routing flag indicating an active route is called
V4L2_SUBDEV_ROUTE_FL_ACTIVE, not V4L2_SUBDEV_STREAM_FL_ACTIVE. Fix this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Remove DocBook (?) conversion leftovers from figure titles, including
obsolete numbering and highlighting. This aligns these titles with others.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Once an async connection is found to be matching with an fwnode, a
sub-device may be registered (in case it wasn't already), its bound
operation is called, ancillary links are created, the async connection
is added to the sub-device's list of connections and removed from the
global waiting connection list. Further on, the sub-device's possible own
notifier is searched for possible additional matches.
Fix these specific issues:
- If v4l2_async_match_notify() failed before the sub-notifier handling,
the async connection was unbound and its entry removed from the
sub-device's async connection list. The latter part was also done in
v4l2_async_match_notify().
- The async connection's sd field was only set after creating ancillary
links in v4l2_async_match_notify(). It was however dereferenced in
v4l2_async_unbind_subdev_one(), which was called on error path of
v4l2_async_match_notify() failure.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: "Yew, Chang Ching" <chang.ching.yew@intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Calculating maximum M for scaler configuration involves dividing by
MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably
non-zero, the driver was missing the check it in fact was. Fix this.
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Closes: https://lore.kernel.org/all/ahukd6b3wonye3zgtptvwzvrxldcruazs2exfvll6etjhmcxyj@vq3eh6pd375b/
Fixes: ccfc97bdb5ae ("[media] smiapp: Add driver")
Cc: stable@vger.kernel.org # for 5.15 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
v4l2_fwnode_endpoint_parse() and v4l2_fwnode_endpoint_alloc_parse() take
a fwnode as the first argument and leave it up to the caller to check a
valid fwnode has been obtained through various means. Instead, add a check
here so the callers won't need to do that anymore.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The vast majority of the callers of v4l2_ctrl_new_fwnode_properties() do
check the returned error code but the function does not set the control
handler's error on failure. This will make error handling more complicated
and prone for bugs.
Always assign the control handler's error field on error in
v4l2_ctrl_new_fwnode_properties().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251224110240.56803-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Correct copy-paste errors where remove_callback safety invariants
incorrectly referenced probe_callback().
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260110115159.2313116-1-alok.a.tiwari@oracle.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Correct copy-paste errors where remove_callback safety invariants
incorrectly referenced probe_callback().
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260110114817.2312828-1-alok.a.tiwari@oracle.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
'net-rds-rds-tcp-bug-fix-collection-subset-1-work-queue-scalability'
Allison Henderson says:
====================
net/rds: RDS-TCP bug fix collection, subset 1: Work queue scalability
This is subset 1 of the RDS-TCP bug fix collection series I posted last
Oct. The greater series aims to correct multiple rds-tcp bugs that
can cause dropped or out of sequence messages. The set was starting to
get a bit large, so I've broken it down into smaller sets to make
reviews more manageable.
In this subset, we focus on work queue scalability. Messages queues
are refactored to operate in parallel across multiple connections,
which improves response times and avoids timeouts.
The entire set can be viewed in the rfc here:
https://lore.kernel.org/netdev/20251022191715.157755-1-achender@kernel.org/
Questions, comments, flames appreciated!
====================
Link: https://patch.msgid.link/20260109224843.128076-1-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
RDS was written to require ordered workqueues for "cp->cp_wq":
Work is executed in the order scheduled, one item at a time.
If these workqueues are shared across connections,
then work executed on behalf of one connection blocks work
scheduled for a different and unrelated connection.
Luckily we don't need to share these workqueues.
While it obviously makes sense to limit the number of
workers (processes) that ought to be allocated on a system,
a workqueue that doesn't have a rescue worker attached,
has a tiny footprint compared to the connection as a whole:
A workqueue costs ~900 bytes, including the workqueue_struct,
pool_workqueue, workqueue_attrs, wq_node_nr_active and the
node_nr_active flex array. Each connection can have up to 8
(RDS_MPATH_WORKERS) paths for a worst case of ~7 KBytes per
connection. While an RDS/IB connection totals only ~5 MBytes.
So we're getting a signficant performance gain
(90% of connections fail over under 3 seconds vs. 40%)
for a less than 0.02% overhead.
RDS doesn't even benefit from the additional rescue workers:
of all the reasons that RDS blocks workers, allocation under
memory pressue is the least of our concerns. And even if RDS
was stalling due to the memory-reclaim process, the work
executed by the rescue workers are highly unlikely to free up
any memory. If anything, they might try to allocate even more.
By giving each connection path its own workqueues, we allow
RDS to better utilize the unbound workers that the system
has available.
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260109224843.128076-3-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch adds a per connection workqueue which can be initialized
and used independently of the globally shared rds_wq.
This patch is the first in a series that aims to address tcp ack
timeouts during the tcp socket shutdown sequence.
This initial refactoring lays the ground work needed to alleviate
queue congestion during heavy reads and writes. The independently
managed queues will allow shutdowns and reconnects respond more quickly
before the peer(s) timeout waiting for the proper acks.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260109224843.128076-2-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The callbacks .probe(), .remove() and .shutdown() for device_drivers
should go away. So migrate to bus methods. There are two differences
that need addressing:
- The bus remove callback returns void while the driver remove callback
returns int (the actual value is ignored by the core).
- The bus shutdown callback is also called for unbound devices, so an
additional check for dev->driver != NULL is needed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20 tegra-video
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/dd55d034c68953268ea416aa5c13e41b158fcbb4.1765355236.git.u.kleine-koenig@baylibre.com
|
|
ida_alloc_max() interprets its max argument as inclusive.
Using SDW_FW_MAX_DEVICES(16) therefore allows an ID of 16 to be
allocated, but the IRQ domain created for the bus is sized for IDs
0-15. If 16 is returned, irq_create_mapping() fails and the driver
ends up with an invalid IRQ mapping.
Limit the allocation to 0-15 by passing SDW_FW_MAX_DEVICES - 1.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202512240450.hlDH3nCs-lkp@intel.com/
Fixes: aab12022b076 ("soundwire: bus: Add internal slave ID and use for IRQs")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260110201959.2523024-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The return value of struct device_driver::remove is ignored by the core
(see device_remove() in drivers/base/dd.c). So it doesn't make sense to
let the host1x remove callback return an int just to ignore it later.
So make the callback return void. All current implementors return 0, so
they are easily converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20 tegra-video
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/d364fd4ec043d36ee12e46eaef98c57658884f63.1765355236.git.u.kleine-koenig@baylibre.com
|
|
Replace slab.h with device/devres.h as the devm_*() APIs are defined
in the latter.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
says:
====================
Multi-queue aware sch_cake
This series adds a multi-queue aware variant of the sch_cake scheduler,
called 'cake_mq'. Using this makes it possible to scale the rate shaper
of sch_cake across multiple CPUs, while still enforcing a single global
rate on the interface.
The approach taken in this patch series is to implement a separate qdisc
called 'cake_mq', which is based on the existing 'mq' qdisc, but differs
in a couple of aspects:
- It will always install a cake instance on each hardware queue (instead
of using the default qdisc for each queue like 'mq' does).
- The cake instances on the queues will share their configuration, which
can only be modified through the parent cake_mq instance.
Doing things this way simplifies user configuration by centralising
all configuration through the cake_mq qdisc (which also serves as an
obvious way of opting into the multi-queue aware behaviour). The cake_mq
qdisc takes all the same configuration parameters as the cake qdisc.
An earlier version of this work was presented at this year's Netdevconf:
https://netdevconf.info/0x19/sessions/talk/mq-cake-scaling-software-rate-limiting-across-cpu-cores.html
The patch series is structured as follows:
- Patch 1 exports the mq qdisc functions for reuse.
- Patch 2 factors out the sch_cake configuration variables into a
separate struct that can be shared between instances.
- Patch 3 adds the basic cake_mq qdisc, reusing the exported mq code
- Patch 4 adds configuration sharing across the cake instances installed
under cake_mq
- Patch 5 adds the shared shaper state that enables the multi-core rate
shaping
- Patch 6 adds selftests for cake_mq
A patch to iproute2 to make it aware of the cake_mq qdisc were submitted
separately with a previous patch version:
https://lore.kernel.org/r/20260105162902.1432940-1-toke@redhat.com
====================
Link: https://patch.msgid.link/20260109-mq-cake-sub-qdisc-v8-0-8d613fece5d8@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Test 684b: Create CAKE_MQ with default setting (4 queues)
Test 7ee8: Create CAKE_MQ with bandwidth limit (4 queues)
Test 1f87: Create CAKE_MQ with rtt time (4 queues)
Test e9cf: Create CAKE_MQ with besteffort flag (4 queues)
Test 7c05: Create CAKE_MQ with diffserv8 flag (4 queues)
Test 5a77: Create CAKE_MQ with diffserv4 flag (4 queues)
Test 8f7a: Create CAKE_MQ with flowblind flag (4 queues)
Test 7ef7: Create CAKE_MQ with dsthost and nat flag (4 queues)
Test 2e4d: Create CAKE_MQ with wash flag (4 queues)
Test b3e6: Create CAKE_MQ with flowblind and no-split-gso flag (4 queues)
Test 62cd: Create CAKE_MQ with dual-srchost and ack-filter flag (4 queues)
Test 0df3: Create CAKE_MQ with dual-dsthost and ack-filter-aggressive flag (4 queues)
Test 9a75: Create CAKE_MQ with memlimit and ptm flag (4 queues)
Test cdef: Create CAKE_MQ with fwmark and atm flag (4 queues)
Test 93dd: Create CAKE_MQ with overhead 0 and mpu (4 queues)
Test 1475: Create CAKE_MQ with conservative and ingress flag (4 queues)
Test 7bf1: Delete CAKE_MQ with conservative and ingress flag (4 queues)
Test ee55: Replace CAKE_MQ with mpu (4 queues)
Test 6df9: Change CAKE_MQ with mpu (4 queues)
Test 67e2: Show CAKE_MQ class (4 queues)
Test 2de4: Change bandwidth of CAKE_MQ (4 queues)
Test 5f62: Fail to create CAKE_MQ with autorate-ingress flag (4 queues)
Test 038e: Fail to change setting of sub-qdisc under CAKE_MQ
Test 7bdc: Fail to replace sub-qdisc under CAKE_MQ
Test 18e0: Fail to install CAKE_MQ on single queue device
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20260109-mq-cake-sub-qdisc-v8-6-8d613fece5d8@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This commit adds shared shaper state across the cake instances beneath a
cake_mq qdisc. It works by periodically tracking the number of active
instances, and scaling the configured rate by the number of active
queues.
The scan is lockless and simply reads the qlen and the last_active state
variable of each of the instances configured beneath the parent cake_mq
instance. Locking is not required since the values are only updated by
the owning instance, and eventual consistency is sufficient for the
purpose of estimating the number of active queues.
The interval for scanning the number of active queues is set to 200 us.
We found this to be a good tradeoff between overhead and response time.
For a detailed analysis of this aspect see the Netdevconf talk:
https://netdevconf.info/0x19/docs/netdev-0x19-paper16-talk-paper.pdf
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20260109-mq-cake-sub-qdisc-v8-5-8d613fece5d8@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds support for configuring the cake_mq instance directly, sharing
the config across the cake sub-qdiscs.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20260109-mq-cake-sub-qdisc-v8-4-8d613fece5d8@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a cake_mq qdisc which installs cake instances on each hardware
queue on a multi-queue device.
This is just a copy of sch_mq that installs cake instead of the default
qdisc on each queue. Subsequent commits will add sharing of the config
between cake instances, as well as a multi-queue aware shaper algorithm.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20260109-mq-cake-sub-qdisc-v8-3-8d613fece5d8@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Factor out all the user-configurable variables into a separate struct
and embed it into struct cake_sched_data. This is done in preparation
for sharing the configuration across multiple instances of cake in an mq
setup.
No functional change is intended with this patch.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20260109-mq-cake-sub-qdisc-v8-2-8d613fece5d8@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
To enable the cake_mq qdisc to reuse code from the mq qdisc, export a
bunch of functions from sch_mq. Split common functionality out from some
functions so it can be composed with other code, and export other
functions wholesale. To discourage wanton reuse, put the symbols into a
new NET_SCHED_INTERNAL namespace, and a sch_priv.h header file.
No functional change intended.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20260109-mq-cake-sub-qdisc-v8-1-8d613fece5d8@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for Telit LE910 module when operating in MBIM composition
with additional ttys. This USB product ID is used by the module
when AT#USBCFG is set to 7.
0x1252: MBIM + tty(NMEA) + tty(MODEM) + tty(MODEM) + SAP
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1252 Rev=03.18
S: Manufacturer=Android
S: Product=LE910C1-EU
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
Signed-off-by: Ulrich Mohr <u.mohr@semex-engcon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The tracepoints sched_entry, sched_exit and sched_set_need_resched
are not exported to tracefs as trace events, this allows only kernel
code to access them. Helper modules like [1] can be used to still have
the tracepoints available to ftrace for debugging purposes, but they do
rely on the tracepoints being exported.
Export the 3 not exported tracepoints.
Note that sched_set_state is already exported as the macro is called
from modules.
[1] - https://github.com/qais-yousef/sched_tp.git
Fixes: adcc3bfa8806 ("sched: Adapt sched tracepoints for RV task model")
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://patch.msgid.link/20251205131621.135513-9-gmonaco@redhat.com
|
|
The deadline server can currently stop due to idle although fair tasks
are runnable. This happens essentially when:
* the server is set to idle, a task wakes up, the server stops
* a task wakes up, the server sets itself to idle and stops right away
Address both cases by clearing the server idle flag whenever a fair task
wakes up and accounting also for pending tasks in the definition of idle.
Fixes: f5a538c07df2 ("sched/deadline: Fix dl_server stop condition")
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260113085159.114226-3-gmonaco@redhat.com
|
|
A fix for the dl_server 'requires' idle_cpu() usage, which made me
note that it and available_idle_cpu() are extern function calls.
And while idle_cpu() is used outside of kernel/sched/,
available_idle_cpu() is not.
This makes it hard to make idle_cpu() an inline helper, so provide
idle_rq() and implement idle_cpu() and available_idle_cpu() using
that.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Commit 59953303827e ("objtool: Disassemble code with libopcodes instead
of running objdump") added support for using libopcodes for disassembly.
However, the feature detection checks for libbfd availability but then
unconditionally links against libopcodes:
ifeq ($(feature-libbfd),1)
OBJTOOL_LDFLAGS += -lopcodes
endif
This causes build failures in environments where libbfd is installed but
libopcodes is not, since the test-libbfd.c feature test only links
against -lbfd and -ldl, not -lopcodes:
/usr/bin/ld: cannot find -lopcodes: No such file or directory
collect2: error: ld returned 1 exit status
make[4]: *** [Makefile:109: objtool] Error 1
Additionally, the shared feature framework uses $(CC) which is the
cross-compiler in cross-compilation builds. Since objtool is a host tool
that links with $(HOSTCC) against host libraries, the feature detection
can falsely report libopcodes as available when the cross-compiler's
sysroot has it but the host system doesn't.
Fix this by replacing the feature framework check with a direct inline
test that uses $(HOSTCC) to compile and link a test program against
libopcodes, similar to how xxhash availability is detected.
Fixes: 59953303827e ("objtool: Disassemble code with libopcodes instead of running objdump")
Assisted-by: claude-opus-4-5-20251101
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251223120357.2492008-1-sashal@kernel.org
|
|
The access rule for local_cpu_mask_dl requires it to be called on the
local CPU with preemption disabled. However, dl_add_task_root_domain()
currently violates this rule.
Without preemption disabled, the following race can occur:
1. ThreadA calls dl_add_task_root_domain() on CPU 0
2. Gets pointer to CPU 0's local_cpu_mask_dl
3. ThreadA is preempted and migrated to CPU 1
4. ThreadA continues using CPU 0's local_cpu_mask_dl
5. Meanwhile, the scheduler on CPU 0 calls find_later_rq() which also
uses local_cpu_mask_dl (with preemption properly disabled)
6. Both contexts now corrupt the same per-CPU buffer concurrently
Fix this by moving the local_cpu_mask_dl access to the preemption
disabled section.
Closes: https://lore.kernel.org/lkml/aSBjm3mN_uIy64nz@jlelli-thinkpadt14gen4.remote.csb
Fixes: 318e18ed22e8 ("sched/deadline: Walk up cpuset hierarchy to decide root domain when hot-unplug")
Reported-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://patch.msgid.link/20251125032630.8746-3-piliu@redhat.com
|
|
The comments above dl_get_task_effective_cpus() and
dl_add_task_root_domain() already explain how to fetch a valid
root domain and protect against races. There's no need to repeat
this inside dl_add_task_root_domain(). Remove the redundant comment
to keep the code clean.
No functional change.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://patch.msgid.link/20251125032630.8746-2-piliu@redhat.com
|
