kernel.git/virt/kvm/arm/arm.c, branch linux-5.3.y

Merge tag 'kvmarm-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

2019-08-09T14:53:50Z

KVM/arm fixes for 5.3, take #2 - Fix our system register reset so that we stop writing non-sensical values to them, and track which registers get reset instead. - Sync VMCR back from the GIC on WFI so that KVM has an exact vue of PMR. - Reevaluate state of HW-mapped, level triggered interrupts on enable.

Merge tag 'kvmarm-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

2019-08-09T14:53:39Z

KVM/arm fixes for 5.3 - A bunch of switch/case fall-through annotation, fixing one actual bug - Fix PMU reset bug - Add missing exception class debug strings

KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block

2019-08-05T14:36:46Z

Since commit commit 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or its GICv2 equivalent) loaded as long as we can, only syncing it back when we're scheduled out. There is a small snag with that though: kvm_vgic_vcpu_pending_irq(), which is indirectly called from kvm_vcpu_check_block(), needs to evaluate the guest's view of ICC_PMR_EL1. At the point were we call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever changes to PMR is not visible in memory until we do a vcpu_put(). Things go really south if the guest does the following: mov x0, #0 // or any small value masking interrupts msr ICC_PMR_EL1, x0 [vcpu preempted, then rescheduled, VMCR sampled] mov x0, #ff // allow all interrupts msr ICC_PMR_EL1, x0 wfi // traps to EL2, so samping of VMCR [interrupt arrives just after WFI] Here, the hypervisor's view of PMR is zero, while the guest has enabled its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no interrupts are pending (despite an interrupt being received) and we'll block for no reason. If the guest doesn't have a periodic interrupt firing once it has blocked, it will stay there forever. To avoid this unfortuante situation, let's resync VMCR from kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block() will observe the latest value of PMR. This has been found by booting an arm64 Linux guest with the pseudo NMI feature, and thus using interrupt priorities to mask interrupts instead of the usual PSTATE masking. Cc: stable@vger.kernel.org # 4.12 Fixes: 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put") Signed-off-by: Marc Zyngier

KVM: remove kvm_arch_has_vcpu_debugfs()

2019-08-05T10:55:48Z

There is no need for this function as all arches have to implement kvm_arch_create_vcpu_debugfs() no matter what. A #define symbol let us actually simplify the code. Signed-off-by: Paolo Bonzini

Documentation: move Documentation/virtual to Documentation/virt

2019-07-24T08:52:11Z

Renaming docs seems to be en vogue at the moment, so fix on of the grossly misnamed directories. We usually never use "virtual" as a shortcut for virtualization in the kernel, but always virt, as seen in the virt/ top-level directory. Fix up the documentation to match that. Fixes: ed16648eb5b8 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:") Signed-off-by: Christoph Hellwig Signed-off-by: Paolo Bonzini

KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index

2019-07-23T08:23:44Z

We use "pmc->idx" and the "chained" bitmap to determine if the pmc is chained, in kvm_pmu_pmc_is_chained(). But idx might be uninitialized (and random) when we doing this decision, through a KVM_ARM_VCPU_INIT ioctl -> kvm_pmu_vcpu_reset(). And the test_bit() against this random idx will potentially hit a KASAN BUG [1]. In general, idx is the static property of a PMU counter that is not expected to be modified across resets, as suggested by Julien. It looks more reasonable if we can setup the PMU counter idx for a vcpu in its creation time. Introduce a new function - kvm_pmu_vcpu_init() for this basic setup. Oh, and the KASAN BUG will get fixed this way. [1] https://www.spinics.net/lists/kvm-arm/msg36700.html Fixes: 80f393a23be6 ("KVM: arm/arm64: Support chained PMU counters") Suggested-by: Andrew Murray Suggested-by: Julien Thierry Acked-by: Julien Thierry Signed-off-by: Zenghui Yu Signed-off-by: Marc Zyngier

Merge tag 'kvm-arm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

2019-07-11T13:14:16Z

KVM/arm updates for 5.3 - Add support for chained PMU counters in guests - Improve SError handling - Handle Neoverse N1 erratum #1349291 - Allow side-channel mitigation status to be migrated - Standardise most AArch64 system register accesses to msr_s/mrs_s - Fix host MPIDR corruption on 32bit

KVM: arm/arm64: Initialise host's MPIDRs by reading the actual register

2019-07-08T15:29:48Z

As part of setting up the host context, we populate its MPIDR by using cpu_logical_map(). It turns out that contrary to arm64, cpu_logical_map() on 32bit ARM doesn't return the *full* MPIDR, but a truncated version. This leaves the host MPIDR slightly corrupted after the first run of a VM, since we won't correctly restore the MPIDR on exit. Oops. Since we cannot trust cpu_logical_map(), let's adopt a different strategy. We move the initialization of the host CPU context as part of the per-CPU initialization (which, in retrospect, makes a lot of sense), and directly read the MPIDR from the HW. This is guaranteed to work on both arm and arm64. Reported-by: Andre Przywara Tested-by: Andre Przywara Fixes: 32f139551954 ("arm/arm64: KVM: Statically configure the host's view of MPIDR") Signed-off-by: Marc Zyngier

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 266

2019-06-05T15:30:28Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 67 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141333.953658117@linutronix.de Signed-off-by: Greg Kroah-Hartman

KVM: Directly return result from kvm_arch_check_processor_compat()

2019-06-04T17:27:32Z

Add a wrapper to invoke kvm_arch_check_processor_compat() so that the boilerplate ugliness of checking virtualization support on all CPUs is hidden from the arch specific code. x86's implementation in particular is quite heinous, as it unnecessarily propagates the out-param pattern into kvm_x86_ops. While the x86 specific issue could be resolved solely by changing kvm_x86_ops, make the change for all architectures as returning a value directly is prettier and technically more robust, e.g. s390 doesn't set the out param, which could lead to subtle breakage in the (highly unlikely) scenario where the out-param was not pre-initialized by the caller. Opportunistically annotate svm_check_processor_compat() with __init. Signed-off-by: Sean Christopherson Reviewed-by: Cornelia Huck Signed-off-by: Paolo Bonzini