kernel.git/tools/testing/selftests/powerpc, branch linux-5.12.y

selftests/powerpc: Fix "no_handler" EBB selftest

2021-07-20T14:02:09Z

[ Upstream commit 45677c9aebe926192e59475b35a1ff35ff2d4217 ] The "no_handler_test" in ebb selftests attempts to read the PMU registers twice via helper function "dump_ebb_state". First dump is just before closing of event and the second invocation is done after closing of the event. The original intention of second dump_ebb_state was to dump the state of registers at the end of the test when the counters are frozen. But this will be achieved with the first call itself since sample period is set to low value and PMU will be frozen by then. Hence patch removes the dump which was done before closing of the event. Reported-by: Shirisha Ganta Signed-off-by: Athira Rajeev Tested-by: Nageswara R Sastry > Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1621950703-1532-2-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin

selftests/powerpc: Fix L1D flushing tests for Power10

2021-05-19T08:56:12Z

[ Upstream commit 3a72c94ebfb1f171eba0715998010678a09ec796 ] The rfi_flush and entry_flush selftests work by using the PM_LD_MISS_L1 perf event to count L1D misses. The value of this event has changed over time: - Power7 uses 0x400f0 - Power8 and Power9 use both 0x400f0 and 0x3e054 - Power10 uses only 0x3e054 Rather than relying on raw values, configure perf to count L1D read misses in the most explicit way available. This fixes the selftests to work on systems without 0x400f0 as PM_LD_MISS_L1, and should change no behaviour for systems that the tests already worked on. The only potential downside is that referring to a specific perf event requires PMU support implemented in the kernel for that platform. Signed-off-by: Russell Currey Acked-by: Daniel Axtens Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210223070227.2916871-1-ruscur@russell.cc Signed-off-by: Sasha Levin

Merge tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2021-02-22T22:34:00Z

Pull powerpc updates from Michael Ellerman: - A large series adding wrappers for our interrupt handlers, so that irq/nmi/user tracking can be isolated in the wrappers rather than spread in each handler. - Conversion of the 32-bit syscall handling into C. - A series from Nick to streamline our TLB flushing when using the Radix MMU. - Switch to using queued spinlocks by default for 64-bit server CPUs. - A rework of our PCI probing so that it happens later in boot, when more generic infrastructure is available. - Two small fixes to allow 32-bit little-endian processes to run on 64-bit kernels. - Other smaller features, fixes & cleanups. Thanks to: Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang Fan, Christophe Leroy, Christopher M. Riedl, Fabiano Rosas, Florian Fainelli, Frederic Barrat, Ganesh Goudar, Hari Bathini, Jiapeng Chong, Joseph J Allen, Kajol Jain, Markus Elfring, Michal Suchanek, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pingfan Liu, Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan Das, Stephen Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, and Zheng Yongjun. * tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (188 commits) powerpc/perf: Adds support for programming of Thresholding in P10 powerpc/pci: Remove unimplemented prototypes powerpc/uaccess: Merge raw_copy_to_user_allowed() into raw_copy_to_user() powerpc/uaccess: Merge __put_user_size_allowed() into __put_user_size() powerpc/uaccess: get rid of small constant size cases in raw_copy_{to,from}_user() powerpc/64: Fix stack trace not displaying final frame powerpc/time: Remove get_tbl() powerpc/time: Avoid using get_tbl() spi: mpc52xx: Avoid using get_tbl() powerpc/syscall: Avoid storing 'current' in another pointer powerpc/32: Handle bookE debugging in C in syscall entry/exit powerpc/syscall: Do not check unsupported scv vector on PPC32 powerpc/32: Remove the counter in global_dbcr0 powerpc/32: Remove verification of MSR_PR on syscall in the ASM entry powerpc/syscall: implement system call entry/exit logic in C for PPC32 powerpc/32: Always save non volatile GPRs at syscall entry powerpc/syscall: Change condition to check MSR_RI powerpc/syscall: Save r3 in regs->orig_r3 powerpc/syscall: Use is_compat_task() powerpc/syscall: Make interrupt.c buildable on PPC32 ...

selftests/powerpc: Add VF recovery tests

2021-01-31T11:35:47Z

The basic EEH test ignores VFs since we the way the eeh_dev_break debugfs interface works means that if multiple VFs are enabled we may cause errors on all them them. However, we can work around that by only enabling a single VF at a time. This patch adds some infrastructure for finding SR-IOV capable devices and enabling / disabling VFs so we can exercise the VF specific EEH recovery paths. Two new tests are added, one for testing EEH aware devices and one for EEH un-aware VFs. Signed-off-by: Oliver O'Halloran Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201103044503.917128-3-oohall@gmail.com

selftests/powerpc: Use stderr for debug messages in eeh-functions

2021-01-31T11:35:47Z

We want to use stdout to return lists of devices, etc so log debug / status messages to stderr rather than stdout. Signed-off-by: Oliver O'Halloran Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201103044503.917128-2-oohall@gmail.com

selftests/powerpc: Hoist helper code out of eeh-basic

2021-01-31T11:35:47Z

Hoist some of the useful test environment checking and prep code into eeh-functions.sh so they can be reused in other tests. Signed-off-by: Oliver O'Halloran Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201103044503.917128-1-oohall@gmail.com

selftests/powerpc: Only test lwm/stmw on big endian

2021-01-20T00:49:55Z

Newer binutils (>= 2.36) refuse to assemble lmw/stmw when building in little endian mode. That breaks compilation of our alignment handler test: /tmp/cco4l14N.s: Assembler messages: /tmp/cco4l14N.s:1440: Error: `lmw' invalid when little-endian /tmp/cco4l14N.s:1814: Error: `stmw' invalid when little-endian make[2]: *** [../../lib.mk:139: /output/kselftest/powerpc/alignment/alignment_handler] Error 1 These tests do pass on little endian machines, as the kernel will still emulate those instructions even when running little endian (which is arguably a kernel bug). But we don't really need to test that case, so ifdef those instructions out to get the alignment test building again. Reported-by: Libor Pechacek Signed-off-by: Michael Ellerman Tested-by: Libor Pechacek Link: https://lore.kernel.org/r/20210119041800.3093047-1-mpe@ellerman.id.au

selftests/powerpc: Fix exit status of pkey tests

2021-01-18T21:04:32Z

Since main() does not return a value explicitly, the return values from FAIL_IF() conditions are ignored and the tests can still pass irrespective of failures. This makes sure that we always explicitly return the correct test exit status. Fixes: 1addb6444791 ("selftests/powerpc: Add test for execute-disabled pkeys") Fixes: c27f2fd1705a ("selftests/powerpc: Add test for pkey siginfo verification") Reported-by: Eirik Fuller Signed-off-by: Sandipan Das Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210118093145.10134-1-sandipan@linux.ibm.com

selftests/powerpc: Make the test check in eeh-basic.sh posix compliant

2021-01-04T13:00:29Z

The == operand is a bash extension, thus this will fail on Ubuntu with: ./eeh-basic.sh: 89: test: 2: unexpected operator As the /bin/sh on Ubuntu is pointed to DASH. Use -eq to fix this posix compatibility issue. Fixes: 996f9e0f93f162 ("selftests/powerpc: Fix eeh-basic.sh exit codes") Signed-off-by: Po-Hsu Lin Reviewed-by: Frederic Barrat Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201228043459.14281-1-po-hsu.lin@canonical.com

selftests/powerpc: Fix uninitialized variable warning

2020-12-03T14:01:21Z

Patch fixes uninitialized variable warning in bad_accesses test which causes the selftests build to fail in older distibutions bad_accesses.c: In function ‘bad_access’: bad_accesses.c:52:9: error: ‘x’ may be used uninitialized in this function [-Werror=maybe-uninitialized] printf("Bad - no SEGV! (%c)\n", x); ^ cc1: all warnings being treated as errors Signed-off-by: Harish Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201201092403.238182-1-harish@linux.ibm.com