kernel.git/tools/testing/selftests/net/forwarding, branch linux-5.5.y

selftests: forwarding: vxlan_bridge_1d: use more proper tos value

2020-03-12T06:18:29Z

[ Upstream commit 9b64208f74fbd0e920475ecfe9326f8443fdc3a5 ] 0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid that. 0x14 and 0x18 would be better and works as well. Reported-by: Petr Machata Fixes: 4e867c9a50ff ("selftests: forwarding: vxlan_bridge_1d: fix tos value") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: forwarding: vxlan_bridge_1d: fix tos value

2020-03-12T06:18:25Z

[ Upstream commit 4e867c9a50ff1a07ed0b86c3b1c8bc773933d728 ] After commit 71130f29979c ("vxlan: fix tos value before xmit") we start strict vxlan xmit tos value by RT_TOS(), which limits the tos value less than 0x1E. With current value 0x40 the test will failed with "v1: Expected to capture 10 packets, got 0". So let's choose a smaller tos value for testing. Fixes: d417ecf533fe ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: forwarding: use proto icmp for {gretap, ip6gretap}_mac testing

2020-03-12T06:18:25Z

[ Upstream commit e8023b030ce1748930e2dc76353a262fe47d4745 ] For tc ip_proto filter, when we extract the flow via __skb_flow_dissect() without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to the inner proto. So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP proto. For test mirror_gre.sh, it may make user confused if we capture ICMP message on $h3(since the flow is GRE message). So I move the capture dev to h3-gt{4,6}, and only capture ICMP message. Before the fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality After fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality Fixes: ba8d39871a10 ("selftests: forwarding: Add test for mirror to gretap") Signed-off-by: Hangbin Liu Reviewed-by: Petr Machata Tested-by: Petr Machata Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: loopback.sh: skip this test if the driver does not support

2020-01-03T20:23:34Z

The loopback feature is only supported on a few drivers like broadcom, mellanox, etc. The default veth driver has not supported it yet. To avoid returning failed and making the runner feel confused, let's just skip the test on drivers that not support loopback. Fixes: ad11340994d5 ("selftests: Add loopback test") Signed-off-by: Hangbin Liu Reviewed-by: Simon Horman Signed-off-by: David S. Miller

selftests: forwarding: Delete IPv6 address at the end

2019-12-09T18:19:45Z

When creating the second host in h2_create(), two addresses are assigned to the interface, but only one is deleted. When running the test twice in a row the following error is observed: $ ./router_bridge_vlan.sh TEST: ping [ OK ] TEST: ping6 [ OK ] TEST: vlan [ OK ] $ ./router_bridge_vlan.sh RTNETLINK answers: File exists TEST: ping [ OK ] TEST: ping6 [ OK ] TEST: vlan [ OK ] Fix this by deleting the address during cleanup. Fixes: 5b1e7f9ebd56 ("selftests: forwarding: Test routed bridge interface") Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

selftests: forwarding: fix race between packet receive and tc check

2019-11-30T20:23:27Z

It is possible that tc stats get checked before the packet we check for actually arrived into the interface and accounted for. Fix it by checking for the expected result in a loop until timeout is reached (by default 1 second). Fixes: 07e5c75184a1 ("selftests: forwarding: Introduce tc flower matching tests") Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

selftests: forwarding: Add speed and auto-negotiation test

2019-11-19T01:11:54Z

Check configurations and packets transference with different variations of autoneg and speed. Test plan: 1. Test force of same speed with autoneg off 2. Test force of different speeds with autoneg off (should fail) 3. One side is autoneg on and other side sets force of common speeds 4. One side is autoneg on and other side only advertises a subset of the common speeds (one speed of the subset) 5. One side is autoneg on and other side only advertises a subset of the common speeds. Check that highest speed is negotiated 6. Test autoneg on, but each side advertises different speeds (should fail) Signed-off-by: Amit Cohen Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

selftests: forwarding: lib.sh: Add wait for dev with timeout

2019-11-19T01:11:54Z

Add a function that waits for device with maximum number of iterations. It enables to limit the waiting and prevent infinite loop. This will be used by the subsequent patch which will set two ports to different speeds in order to make sure they cannot negotiate a link. Waiting for all the setup is limited with 10 minutes for each device. Signed-off-by: Amit Cohen Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

selftests: forwarding: Add ethtool_lib.sh

2019-11-19T01:11:54Z

Functions: 1. speeds_arr_get The function returns an array of speed values from /usr/include/linux/ethtool.h The array looks as follows: [10baseT/Half] = 0, [10baseT/Full] = 1, ... 2. ethtool_set: params: cmd The function runs ethtool by cmd (ethtool -s cmd) and checks if there was an error in configuration 3. dev_speeds_get: params: dev, with_mode (0 or 1), adver (0 or 1) return value: Array of supported/Advertised link modes with/without mode * Example 1: speeds_get swp1 0 0 return: 1000 10000 40000 * Example 2: speeds_get swp1 1 1 return: 1000baseKX/Full 10000baseKR/Full 40000baseCR4/Full 4. common_speeds_get: params: dev1, dev2, with_mode (0 or 1), adver (0 or 1) return value: Array of common speeds of dev1 and dev2 * Example: common_speeds_get swp1 swp2 0 0 return: 1000 10000 Assuming that swp1 supports 1000 10000 40000 and swp2 supports 1000 10000 Signed-off-by: Amit Cohen Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

selftests: forwarding: tc_common: Add hitting check

2019-11-08T03:51:40Z

Add an option to check that packets hit the tc filter without providing the exact number of packets that should hit it. It is useful while sending many packets in background and checking that at least one of them hit the tc filter. Signed-off-by: Amit Cohen Acked-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller