kernel.git/tools/testing/selftests/drivers, branch linux-5.12.y

selftests: Clean forgotten resources as part of cleanup()

2021-07-19T08:00:57Z

[ Upstream commit e67dfb8d15deb33c425d0b0ee22f2e5eef54c162 ] Several tests do not set some ports down as part of their cleanup(), resulting in IPv6 link-local addresses and associated routes not being deleted. These leaks were found using a BPF tool that monitors ASIC resources. Solve this by setting the ports down at the end of the tests. Signed-off-by: Amit Cohen Reviewed-by: Petr Machata Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: mlxsw: Fix mausezahn invocation in ERSPAN scale test

2021-05-19T08:56:20Z

[ Upstream commit 1233898ab758cbcf5f6fea10b8dd16a0b2c24fab ] The mirror_gre_scale test creates as many ERSPAN sessions as the underlying chip supports, and tests that they all work. In order to determine that it issues a stream of ICMP packets and checks if they are mirrored as expected. However, the mausezahn invocation missed the -6 flag to identify the use of IPv6 protocol, and was sending ICMP messages over IPv6, as opposed to ICMP6. It also didn't pass an explicit source IP address, which apparently worked at some point in the past, but does not anymore. To fix these issues, extend the function mirror_test() in mirror_lib by detecting the IPv6 protocol addresses, and using a different ICMP scheme. Fix __mirror_gre_test() in the selftest itself to pass a source IP address. Signed-off-by: Petr Machata Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: mlxsw: Increase the tolerance of backlog buildup

2021-05-19T08:56:19Z

[ Upstream commit dda7f4fa55839baeb72ae040aeaf9ccf89d3e416 ] The intention behind this test is to make sure that qdisc limit is correctly projected to the HW. However, first, due to rounding in the qdisc, and then in the driver, the number cannot actually be accurate. And second, the approach to testing this is to oversubscribe the port with traffic generated on the same switch. The actual backlog size therefore fluctuates. In practice, this test proved to be noisier than the rest, and spuriously fails every now and then. Increase the tolerance to 10 % to avoid these issues. Signed-off-by: Petr Machata Acked-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: mlxsw: Remove a redundant if statement in tc_flower_scale test

2021-05-14T08:53:03Z

[ Upstream commit 1f1c92139e36223b89d8140f2b72f75e79baf8bd ] Currently, the error return code of the failure condition is lost after using an if statement, so the test doesn't fail when it should. Remove the if statement that separates the condition and the error code check, so the test won't always pass. Fixes: abfce9e062021 ("selftests: mlxsw: Reduce running time using offload indication") Reported-by: Ido Schimmel Signed-off-by: Danielle Ratson Reviewed-by: Petr Machata Signed-off-by: Petr Machata Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: mlxsw: Remove a redundant if statement in port_scale test

2021-05-14T08:53:03Z

[ Upstream commit b6fc2f212108b3676f54d00a2c38e3bc36753980 ] Currently, the error return code of the failure condition is lost after using an if statement, so the test doesn't fail when it should. Remove the if statement that separates the condition and the error code check, so the test won't always pass. Fixes: 5154b1b826d9b ("selftests: mlxsw: Add a scale test for physical ports") Reported-by: Ido Schimmel Signed-off-by: Danielle Ratson Reviewed-by: Petr Machata Signed-off-by: Petr Machata Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: netdevsim: Test route offload failure notifications

2021-02-09T00:47:03Z

Add cases to verify that when debugfs variable "fail_route_offload" is set, notification with "rt_offload_failed" flag is received. Extend the existing cases to verify that when sysctl "fib_notify_on_flag_change" is set to 2, the kernel emits notifications only for failed route installation. $ ./fib_notifications.sh TEST: IPv4 route addition [ OK ] TEST: IPv4 route deletion [ OK ] TEST: IPv4 route replacement [ OK ] TEST: IPv4 route offload failed [ OK ] TEST: IPv6 route addition [ OK ] TEST: IPv6 route deletion [ OK ] TEST: IPv6 route replacement [ OK ] TEST: IPv6 route offload failed [ OK ] Signed-off-by: Amit Cohen Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

net: selftests: Add lanes setting test

2021-02-04T02:37:29Z

Test that setting lanes parameter is working. Set max speed and max lanes in the list of advertised link modes, and then try to set max speed with the lanes below max lanes if exists in the list. And then, test that setting number of lanes larger than max lanes fails. Do the above for both autoneg on and off. $ ./ethtool_lanes.sh TEST: 4 lanes is autonegotiated [ OK ] TEST: Lanes number larger than max width is not set [ OK ] TEST: Autoneg off, 4 lanes detected during force mode [ OK ] TEST: Lanes number larger than max width is not set [ OK ] Signed-off-by: Danielle Ratson Signed-off-by: Jakub Kicinski

selftests: netdevsim: Add fib_notifications test

2021-02-03T01:45:59Z

Add test to check fib notifications behavior. The test checks route addition, route deletion and route replacement for both IPv4 and IPv6. When fib_notify_on_flag_change=0, expect single notification for route addition/deletion/replacement. When fib_notify_on_flag_change=1, expect: - two notification for route addition/replacement, first without RTM_F_TRAP and second with RTM_F_TRAP. - single notification for route deletion. $ ./fib_notifications.sh TEST: IPv4 route addition [ OK ] TEST: IPv4 route deletion [ OK ] TEST: IPv4 route replacement [ OK ] TEST: IPv6 route addition [ OK ] TEST: IPv6 route deletion [ OK ] TEST: IPv6 route replacement [ OK ] Signed-off-by: Amit Cohen Signed-off-by: Ido Schimmel Reviewed-by: David Ahern Signed-off-by: Jakub Kicinski

selftests: Extend fib tests to run with and without flags notifications

2021-02-03T01:45:59Z

Run the test cases with both `fib_notify_on_flag_change` sysctls set to '1', and then with both sysctls set to '0' to verify there are no regressions in the test when notifications are added. Signed-off-by: Amit Cohen Signed-off-by: Ido Schimmel Signed-off-by: Jakub Kicinski

selftests: mlxsw: Add a scale test for physical ports

2021-01-23T04:42:13Z

Query the maximum number of supported physical ports using devlink-resource and test that this number can be reached by splitting each of the splittable ports to its width. Test that an error is returned in case the maximum number is exceeded. Signed-off-by: Danielle Ratson Signed-off-by: Ido Schimmel Signed-off-by: Jakub Kicinski