kernel.git/tools/testing/selftests/drivers/net/hw, branch linux-6.16.y

selftests: drv-net: csum: fix interface name for remote host

2025-09-09T17:02:22Z

[ Upstream commit 49c2502b5946ebf454d7e16fd0189769a82b6117 ] Use cfg.remote_ifname for arguments of remote command. Without this UDP tests fail in NIPA where local interface is called enp1s0 and remote enp0s4. Fixes: 1d0dc857b5d8 ("selftests: drv-net: add checksum tests") Reviewed-by: Willem de Bruijn Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20250830183842.688935-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: drv-net: tso: fix non-tunneled tso6 test case name

2025-08-15T14:38:53Z

[ Upstream commit b25b44cd178cc54277f2dc0ff3b3d5a37ae4b26b ] The non-tunneled tso6 test case was showing up as: ok 8 tso.ipv4 This is because of the way test_builder() uses the inner_ipver arg in test naming, and how test_info is iterated over in main(). Given that some tunnels not supported yet, e.g. ipip or sit, only support ipv4 or ipv6 as the inner network protocol, I think the best fix here is to call test_builder() in separate branches for tunneled and non-tunneled tests, and to make supported inner l3 types an explicit attribute of tunnel test cases. # Detected qstat for LSO wire-packets TAP version 13 1..14 ok 1 tso.ipv4 # Testing with mangleid enabled ok 2 tso.vxlan4_ipv4 ok 3 tso.vxlan4_ipv6 # Testing with mangleid enabled ok 4 tso.vxlan_csum4_ipv4 ok 5 tso.vxlan_csum4_ipv6 # Testing with mangleid enabled ok 6 tso.gre4_ipv4 ok 7 tso.gre4_ipv6 ok 8 tso.ipv6 # Testing with mangleid enabled ok 9 tso.vxlan6_ipv4 ok 10 tso.vxlan6_ipv6 # Testing with mangleid enabled ok 11 tso.vxlan_csum6_ipv4 ok 12 tso.vxlan_csum6_ipv6 # Testing with mangleid enabled ok 13 tso.gre6_ipv4 ok 14 tso.gre6_ipv6 # Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0 Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Signed-off-by: Daniel Zahka Link: https://patch.msgid.link/20250723184740.4075410-4-daniel.zahka@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: drv-net: tso: fix vxlan tunnel flags to get correct gso_type

2025-08-15T14:38:53Z

[ Upstream commit 2cfbcc5d8af9199823151c21f740e476b223dd2e ] When vxlan is used with ipv6 as the outer network header, the correct ip link parameters for acheiving the SKB_GSO_UDP_TUNNEL gso type is "udp6zerocsumtx udp6zerocsumrx". Otherwise the gso type will be SKB_GSO_UDP_TUNNEL_CSUM. This bug was the reason for the second of the three possible invocations of run_one_stream() invocations, so that can be deleted as well. We only need to test with the feature off and on. Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Signed-off-by: Daniel Zahka Link: https://patch.msgid.link/20250723184740.4075410-3-daniel.zahka@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: drv-net: tso: enable test cases based on hw_features

2025-08-15T14:38:53Z

[ Upstream commit 266b835e5e84a0f8fec7fd988ee81925890e8d89 ] tso.py uses the active features at the time of test execution as the set of available gso features to test. This means if a gso feature is supported but toggled off at test start, the test will be skipped with a "Device does not support {feature}" message. Instead, we can enumerate the set of toggleable features by capturing the driver's hw_features bitmap. To avoid configuration side-effects from running the test, we also snapshot the wanted_features flag set before making any feature changes, and then attempt to restore the same set of wanted_features before test exit. Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Signed-off-by: Daniel Zahka Link: https://patch.msgid.link/20250723184740.4075410-2-daniel.zahka@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

netlink: specs: ethtool: replace underscores with dashes in names

2025-06-25T22:36:27Z

We're trying to add a strict regexp for the name format in the spec. Underscores will not be allowed, dashes should be used instead. This makes no difference to C (codegen replaces special chars in names) but gives more uniform naming in Python. Fixes: 13e59344fb9d ("net: ethtool: add support for symmetric-xor RSS hash") Fixes: 46fb3ba95b93 ("ethtool: Add an interface for flashing transceiver modules' firmware") Reviewed-by: Kory Maincent Reviewed-by: Donald Hunter Link: https://patch.msgid.link/20250624211002.3475021-4-kuba@kernel.org Signed-off-by: Jakub Kicinski

selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context

2025-06-12T15:15:35Z

Add test_rss_default_context_rule() to verify that ntuple rules can correctly direct traffic to the default RSS context (context 0). The test creates two ntuple rules with explicit location priorities: - A high-priority rule (loc 0) directing specific port traffic to context 0. - A low-priority rule (loc 1) directing all other TCP traffic to context 1. This validates that: 1. Rules targeting the default context function properly. 2. Traffic steering works as expected when mixing default and additional RSS contexts. The test was written by AI, and reviewed by humans. Reviewed-by: Nimrod Oren Signed-off-by: Gal Pressman Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com Signed-off-by: Jakub Kicinski

selftests: drv-net: tso: make bkg() wait for socat to quit

2025-06-05T15:01:00Z

Commit 846742f7e32f ("selftests: drv-net: add a warning for bkg + shell + terminate") added a warning for bkg() used with terminate=True. The tso test was missed as we didn't have it running anywhere in NIPA. Add exit_wait=True, to avoid: # Warning: combining shell and terminate is risky! # SIGTERM may not reach the child on zsh/ksh! getting printed twice for every variant. Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20250604012055.891431-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

selftests: drv-net: tso: fix the GRE device name

2025-06-05T15:00:55Z

The device type for IPv4 GRE is "gre" not "ipgre", unlike for IPv6 which uses "ip6gre". Not sure how I missed this when writing the test, perhaps because all HW I have access to is on an IPv6-only network. Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Reviewed-by: Simon Horman Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20250604012031.891242-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

selftests: drv-net: add configs for the TSO test

2025-06-05T15:00:50Z

Add missing config options for the tso.py test, specifically to make sure the kernel is built with vxlan and gre tunnels. I noticed this while adding a TSO-capable device QEMU to the CI. Previously we only run virtio tests and it doesn't report LSO stats on the QEMU we have. Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20250604001653.853008-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

net: devmem: ncdevmem: remove unused variable

2025-05-28T02:19:36Z

This variable is unused and can be removed. Signed-off-by: Mina Almasry Acked-by: Stanislav Fomichev Link: https://patch.msgid.link/20250523230524.1107879-9-almasrymina@google.com Signed-off-by: Jakub Kicinski