kernel.git/tools/testing/selftests/drivers/net/bonding, branch linux-6.8.y

selftests: bonding: set active slave to primary eth1 specifically

2024-02-19T09:11:35Z

In bond priority testing, we set the primary interface to eth1 and add eth0,1,2 to bond in serial. This is OK in normal times. But when in debug kernel, the bridge port that eth0,1,2 connected would start slowly (enter blocking, forwarding state), which caused the primary interface down for a while after enslaving and active slave changed. Here is a test log from Jakub's debug test[1]. [ 400.399070][ T50] br0: port 1(s0) entered disabled state [ 400.400168][ T50] br0: port 4(s2) entered disabled state [ 400.941504][ T2791] bond0: (slave eth0): making interface the new active one [ 400.942603][ T2791] bond0: (slave eth0): Enslaving as an active interface with an up link [ 400.943633][ T2766] br0: port 1(s0) entered blocking state [ 400.944119][ T2766] br0: port 1(s0) entered forwarding state [ 401.128792][ T2792] bond0: (slave eth1): making interface the new active one [ 401.130771][ T2792] bond0: (slave eth1): Enslaving as an active interface with an up link [ 401.131643][ T69] br0: port 2(s1) entered blocking state [ 401.132067][ T69] br0: port 2(s1) entered forwarding state [ 401.346201][ T2793] bond0: (slave eth2): Enslaving as a backup interface with an up link [ 401.348414][ T50] br0: port 4(s2) entered blocking state [ 401.348857][ T50] br0: port 4(s2) entered forwarding state [ 401.519669][ T250] bond0: (slave eth0): link status definitely down, disabling slave [ 401.526522][ T250] bond0: (slave eth1): link status definitely down, disabling slave [ 401.526986][ T250] bond0: (slave eth2): making interface the new active one [ 401.629470][ T250] bond0: (slave eth0): link status definitely up [ 401.630089][ T250] bond0: (slave eth1): link status definitely up [...] # TEST: prio (active-backup ns_ip6_target primary_reselect 1) [FAIL] # Current active slave is eth2 but not eth1 Fix it by setting active slave to primary slave specifically before testing. [1] https://netdev-3.bots.linux.dev/vmksft-bonding-dbg/results/464301/1-bond-options-sh/stdout Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller

selftests: bonding: Check initial state

2024-02-01T16:36:24Z

The purpose of the test_LAG_cleanup() function is to check that some hardware addresses are removed from underlying devices after they have been unenslaved. The test function simply checks that those addresses are not present at the end. However, if the addresses were never added to begin with due to some error in device setup, the test function currently passes. This is a false positive since in that situation the test did not actually exercise the intended functionality. Add a check that the expected addresses are indeed present after device setup. This makes the test function more robust. I noticed this problem when running the team/dev_addr_lists.sh test on a system without support for dummy and ipv6: tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh Error: Unknown device type. Error: Unknown device type. This program is not intended to be run as root. RTNETLINK answers: Operation not supported TEST: team cleanup mode lacp [ OK ] Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") Signed-off-by: Benjamin Poirier Link: https://lore.kernel.org/r/20240131140848.360618-3-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski

selftests: bonding: do not test arp/ns target with mode balance-alb/tlb

2024-01-25T08:50:54Z

The prio_arp/ns tests hard code the mode to active-backup. At the same time, The balance-alb/tlb modes do not support arp/ns target. So remove the prio_arp/ns tests from the loop and only test active-backup mode. Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests") Reported-by: Jay Vosburgh Closes: https://lore.kernel.org/netdev/17415.1705965957@famine/ Signed-off-by: Hangbin Liu Acked-by: Jay Vosburgh Link: https://lore.kernel.org/r/20240123075917.1576360-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni

selftests: bonding: Increase timeout to 1200s

2024-01-20T05:12:31Z

When tests are run by runner.sh, bond_options.sh gets killed before it can complete: make -C tools/testing/selftests run_tests TARGETS="drivers/net/bonding" [...] # timeout set to 120 # selftests: drivers/net/bonding: bond_options.sh # TEST: prio (active-backup miimon primary_reselect 0) [ OK ] # TEST: prio (active-backup miimon primary_reselect 1) [ OK ] # TEST: prio (active-backup miimon primary_reselect 2) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 0) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 1) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 2) [ OK ] # not ok 7 selftests: drivers/net/bonding: bond_options.sh # TIMEOUT 120 seconds This test includes many sleep statements, at least some of which are related to timers in the operation of the bonding driver itself. Increase the test timeout to allow the test to complete. I ran the test in slightly different VMs (including one without HW virtualization support) and got runtimes of 13m39.760s, 13m31.238s, and 13m2.956s. Use a ~1.5x "safety factor" and set the timeout to 1200s. Fixes: 42a8d4aaea84 ("selftests: bonding: add bonding prio option test") Reported-by: Jakub Kicinski Closes: https://lore.kernel.org/netdev/20240116104402.1203850a@kernel.org/#t Suggested-by: Jakub Kicinski Signed-off-by: Benjamin Poirier Reviewed-by: Hangbin Liu Link: https://lore.kernel.org/r/20240118001233.304759-1-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski

selftests: bonding: Add more missing config options

2024-01-18T10:59:26Z

As a followup to commit 03fb8565c880 ("selftests: bonding: add missing build configs"), add more networking-specific config options which are needed for bonding tests. For testing, I used the minimal config generated by virtme-ng and I added the options in the config file. All bonding tests passed. Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") # for ipv6 Fixes: 6cbe791c0f4e ("kselftest: bonding: add num_grat_arp test") # for tc options Fixes: 222c94ec0ad4 ("selftests: bonding: add tests for ether type changes") # for nlmon Suggested-by: Jakub Kicinski Signed-off-by: Benjamin Poirier Link: https://lore.kernel.org/r/20240116154926.202164-1-bpoirier@nvidia.com Signed-off-by: Paolo Abeni

selftests: bonding: add missing build configs

2024-01-16T14:58:53Z

bonding tests also try to create bridge, veth and dummy interfaces. These are not currently listed in config. Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") Fixes: c078290a2b76 ("selftests: include bonding tests into the kselftest infra") Acked-by: Muhammad Usama Anjum Link: https://lore.kernel.org/r/20240116020201.1883023-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

selftests: bonding: Change script interpreter

2024-01-16T08:06:15Z

The tests changed by this patch, as well as the scripts they source, use features which are not part of POSIX sh (ex. 'source' and 'local'). As a result, these tests fail when /bin/sh is dash such as on Debian. Change the interpreter to bash so that these tests can run successfully. Fixes: d43eff0b85ae ("selftests: bonding: up/down delay w/ slave link flapping") Tested-by: Hangbin Liu Reviewed-by: Hangbin Liu Reviewed-by: Petr Machata Signed-off-by: Benjamin Poirier Reviewed-by: Przemek Kitszel Signed-off-by: Paolo Abeni

selftests: bonding: do not set port down when adding to bond

2024-01-02T14:17:05Z

Similar to commit be809424659c ("selftests: bonding: do not set port down before adding to bond"). The bond-arp-interval-causes-panic test failed after commit a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up") as the kernel will set the port down _after_ adding to bond if setting port down specifically. Fix it by removing the link down operation when adding to bond. Fixes: 2ffd57327ff1 ("selftests: bonding: cause oops in bond_rr_gen_slave_id") Signed-off-by: Hangbin Liu Tested-by: Benjamin Poirier Signed-off-by: David S. Miller

selftests: bonding: create directly devices in the target namespaces

2023-08-28T09:24:08Z

If failed to set link1_1 to netns client, we should delete link1_1 in the cleanup path. But if set link1_1 to netns client successfully, delete link1_1 will report warning. So it will be safer creating directly the devices in the target namespaces. Reported-by: Hangbin Liu Closes: https://lore.kernel.org/all/ZNyJx1HtXaUzOkNA@Laptop-X1/ Signed-off-by: Zhengchao Shao Acked-by: Hangbin Liu Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-08-24T17:51:39Z

Cross-merge networking fixes after downstream PR. Conflicts: include/net/inet_sock.h f866fbc842de ("ipv4: fix data-races around inet->inet_id") c274af224269 ("inet: introduce inet->inet_flags") https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/ Adjacent changes: drivers/net/bonding/bond_alb.c e74216b8def3 ("bonding: fix macvlan over alb bond support") f11e5bd159b0 ("bonding: support balance-alb with openvswitch") drivers/net/ethernet/broadcom/bgmac.c d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()") 23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()") drivers/net/ethernet/broadcom/genet/bcmmii.c 32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()") acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()") net/sctp/socket.c f866fbc842de ("ipv4: fix data-races around inet->inet_id") b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags") Signed-off-by: Jakub Kicinski