kernel.git/tools/testing/selftests/bpf, branch linux-5.16.y

selftests/bpf: Fix u8 narrow load checks for bpf_sk_lookup remote_port

2022-04-13T18:03:24Z

commit 3c69611b8926f8e74fcf76bd97ae0e5dafbeb26a upstream. In commit 9a69e2b385f4 ("bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide") ->remote_port field changed from __u32 to __be16. However, narrow load tests which exercise 1-byte sized loads from offsetof(struct bpf_sk_lookup, remote_port) were not adopted to reflect the change. As a result, on little-endian we continue testing loads from addresses: - (__u8 *)&ctx->remote_port + 3 - (__u8 *)&ctx->remote_port + 4 which map to the zero padding following the remote_port field, and don't break the tests because there is no observable change. While on big-endian, we observe breakage because tests expect to see zeros for values loaded from: - (__u8 *)&ctx->remote_port - 1 - (__u8 *)&ctx->remote_port - 2 Above addresses map to ->remote_ip6 field, which precedes ->remote_port, and are populated during the bpf_sk_lookup IPv6 tests. Unsurprisingly, on s390x we observe: #136/38 sk_lookup/narrow access to ctx v4:OK #136/39 sk_lookup/narrow access to ctx v6:FAIL Fix it by removing the checks for 1-byte loads from offsets outside of the ->remote_port field. Fixes: 9a69e2b385f4 ("bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide") Suggested-by: Ilya Leoshkevich Signed-off-by: Jakub Sitnicki Signed-off-by: Alexei Starovoitov Acked-by: Martin KaFai Lau Link: https://lore.kernel.org/bpf/20220319183356.233666-3-jakub@cloudflare.com Signed-off-by: Greg Kroah-Hartman

selftests, xsk: Fix bpf_res cleanup test

2022-04-13T18:02:58Z

[ Upstream commit 3b22523bca02b0d5618c08b93d8fd1fb578e1cc3 ] After commit 710ad98c363a ("veth: Do not record rx queue hint in veth_xmit"), veth no longer receives traffic on the same queue as it was sent on. This breaks the bpf_res test for the AF_XDP selftests as the socket tied to queue 1 will not receive traffic anymore. Modify the test so that two sockets are tied to queue id 0 using a shared umem instead. When killing the first socket enter the second socket into the xskmap so that traffic will flow to it. This will still test that the resources are not cleaned up until after the second socket dies, without having to rely on veth supporting rx_queue hints. Reported-by: Maciej Fijalkowski Signed-off-by: Magnus Karlsson Signed-off-by: Daniel Borkmann Reviewed-by: Maciej Fijalkowski Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/20220125082945.26179-1-magnus.karlsson@gmail.com Signed-off-by: Sasha Levin

selftests/bpf/test_lirc_mode2.sh: Exit with proper code

2022-04-08T12:06:19Z

[ Upstream commit ec80906b0fbd7be11e3e960813b977b1ffe5f8fe ] When test_lirc_mode2_user exec failed, the test report failed but still exit with 0. Fix it by exiting with an error code. Another issue is for the LIRCDEV checking. With bash -n, we need to quote the variable, or it will always be true. So if test_lirc_mode2_user was not run, just exit with skip code. Fixes: 6bdd533cee9a ("bpf: add selftest for lirc_mode2 type program") Signed-off-by: Hangbin Liu Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20220321024149.157861-1-liuhangbin@gmail.com Signed-off-by: Sasha Levin

selftests/bpf: Fix error reporting from sock_fields programs

2022-04-08T12:06:18Z

[ Upstream commit a4c9fe0ed4a13e25e43fcd44d9f89bc19ba8fbb7 ] The helper macro that records an error in BPF programs that exercise sock fields access has been inadvertently broken by adaptation work that happened in commit b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to use skel and global variables"). BPF_NOEXIST flag cannot be used to update BPF_MAP_TYPE_ARRAY. The operation always fails with -EEXIST, which in turn means the error never gets recorded, and the checks for errors always pass. Revert the change in update flags. Fixes: b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to use skel and global variables") Signed-off-by: Jakub Sitnicki Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Link: https://lore.kernel.org/bpf/20220317113920.1068535-2-jakub@cloudflare.com Signed-off-by: Sasha Levin

selftests/bpf: Make test_lwt_ip_encap more stable and faster

2022-04-08T12:06:15Z

[ Upstream commit d23a8720327d33616f584d76c80824bfa4699be6 ] In test_lwt_ip_encap, the ingress IPv6 encap test failed from time to time. The failure occured when an IPv4 ping through the IPv6 GRE encapsulation did not receive a reply within the timeout. The IPv4 ping and the IPv6 ping in the test used different timeouts (1 sec for IPv4 and 6 sec for IPv6), probably taking into account that IPv6 might need longer to successfully complete. However, when IPv4 pings (with the short timeout) are encapsulated into the IPv6 tunnel, the delays of IPv6 apply. The actual reason for the long delays with IPv6 was that the IPv6 neighbor discovery sometimes did not complete in time. This was caused by the outgoing interface only having a tentative link local address, i.e., not having completed DAD for that lladdr. The ND was successfully retried after 1 sec but that was too late for the ping timeout. The IPv6 addresses for the test were already added with nodad. However, for the lladdrs, DAD was still performed. We now disable DAD in the test netns completely and just assume that the two lladdrs on each veth pair do not collide. This removes all the delays for IPv6 traffic in the test. Without the delays, we can now also reduce the delay of the IPv6 ping to 1 sec. This makes the whole test complete faster because we don't need to wait for the excessive timeout for each IPv6 ping that is supposed to fail. Fixes: 0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest") Signed-off-by: Felix Maurer Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/4987d549d48b4e316cd5b3936de69c8d4bc75a4f.1646305899.git.fmaurer@redhat.com Signed-off-by: Sasha Levin

selftests/bpf: Use "__se_" prefix on architectures without syscall wrapper

2022-04-08T12:06:04Z

[ Upstream commit 046b841ea7c528931e7d2e74d5e668aa6c94c1fc ] On architectures that don't use a syscall wrapper, sys_* function names are set as an alias of __se_sys_* functions. Due to this, there is no BTF associated with sys_* function names. This results in some of the test progs failing to load. Set the SYS_PREFIX to "__se_" to fix this issue. Fixes: 38261f369fb905 ("selftests/bpf: Fix probe_user test failure with clang build kernel") Signed-off-by: Naveen N. Rao Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/013d632aacd3e41290445c0025db6a7055ec6e18.1643973917.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Sasha Levin

selftests/bpf: Extract syscall wrapper

2022-04-08T12:06:04Z

[ Upstream commit 78a2054156dd6265619b230cc5372b74f9ba5233 ] Extract the helper to set up SYS_PREFIX for fentry and kprobe selftests that use __x86_sys_* attach functions. Suggested-by: Andrii Nakryiko Signed-off-by: Kenta Tada Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20220124141622.4378-2-Kenta.Tada@sony.com Signed-off-by: Sasha Levin

selftests/bpf/test_xdp_redirect_multi: use temp netns for testing

2022-04-08T12:05:59Z

[ Upstream commit cec74489a8dee93053340ec88ea938ff4008c3c0 ] Use temp netns instead of hard code name for testing in case the netns already exists. Remove the hard code interface index when creating the veth interfaces. Because when the system loads some virtual interface modules, e.g. tunnels. the ifindex of 2 will be used and the cmd will fail. As the netns has not created if checking environment failed. Trap the clean up function after checking env. Fixes: 8955c1a32987 ("selftests/bpf/xdp_redirect_multi: Limit the tests in netns") Signed-off-by: Hangbin Liu Acked-by: William Tu Link: https://lore.kernel.org/r/20220125081717.1260849-2-liuhangbin@gmail.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin

selftests, xsk: Fix rx_full stats test

2022-04-08T12:05:58Z

[ Upstream commit b4ec6a19231224f6b08dc54ea07da4c4090e8ee3 ] Fix the rx_full stats test so that it correctly reports pass even when the fill ring is not full of buffers. Fixes: 872a1184dbf2 ("selftests: xsk: Put the same buffer only once in the fill ring") Signed-off-by: Magnus Karlsson Signed-off-by: Daniel Borkmann Tested-by: Maciej Fijalkowski Acked-by: Maciej Fijalkowski Link: https://lore.kernel.org/bpf/20220121123508.12759-1-magnus.karlsson@gmail.com Signed-off-by: Sasha Levin

selftests: bpf: Fix bind on used port

2022-04-08T12:05:58Z

[ Upstream commit 8c0be0631d81e48f77d0ebf0534c86e32bef5f89 ] The bind_perm BPF selftest failed when port 111/tcp was already in use during the test. To fix this, the test now runs in its own network name space. To use unshare, it is necessary to reorder the includes. The style of the includes is adapted to be consistent with the other prog_tests. v2: Replace deprecated CHECK macro with ASSERT_OK Fixes: 8259fdeb30326 ("selftests/bpf: Verify that rebinding to port < 1024 from BPF works") Signed-off-by: Felix Maurer Signed-off-by: Andrii Nakryiko Reviewed-by: Jakub Sitnicki Link: https://lore.kernel.org/bpf/551ee65533bb987a43f93d88eaf2368b416ccd32.1642518457.git.fmaurer@redhat.com Signed-off-by: Sasha Levin