kernel.git/tools/testing/selftests/Makefile, branch linux-4.20.y

fix dma-buf/udmabuf selftest

2019-02-12T19:02:19Z

[ Upstream commit 6edf2e3710f4ef2555ad7a2681dbeb4a69092b2d ] This patch fixes the udmabuf selftest. Currently the selftest is broken. I fixed the selftest by setting the F_SEAL_SHRINK seal on the memfd file descriptor which is required by udmabuf and added the test to the selftest Makefile. Signed-off-by: Tom Murphy Reviewed-by: Gerd Hoffmann Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

selftests: add script to stress-test nft packet path vs. control plane

2018-11-12T15:13:35Z

Start flood ping for each cpu while loading/flushing rulesets to make sure we do not access already-free'd rules from nf_tables evaluation loop. Also add this to TARGETS so 'make run_tests' in selftest dir runs it automatically. This would have caught the bug fixed in previous change ("netfilter: nf_tables: do not skip inactive chains during generation update") sooner. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso

Merge branch 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-06-10T17:17:09Z

Pull restartable sequence support from Thomas Gleixner: "The restartable sequences syscall (finally): After a lot of back and forth discussion and massive delays caused by the speculative distraction of maintainers, the core set of restartable sequences has finally reached a consensus. It comes with the basic non disputed core implementation along with support for arm, powerpc and x86 and a full set of selftests It was exposed to linux-next earlier this week, so it does not fully comply with the merge window requirements, but there is really no point to drag it out for yet another cycle" * 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq/selftests: Provide Makefile, scripts, gitignore rseq/selftests: Provide parametrized tests rseq/selftests: Provide basic percpu ops test rseq/selftests: Provide basic test rseq/selftests: Provide rseq library selftests/lib.mk: Introduce OVERRIDE_TARGETS powerpc: Wire up restartable sequences system call powerpc: Add syscall detection for restartable sequences powerpc: Add support for restartable sequences x86: Wire up restartable sequence system call x86: Add support for restartable sequences arm: Wire up restartable sequences system call arm: Add syscall detection for restartable sequences arm: Add restartable sequences support rseq: Introduce restartable sequences system call uapi/headers: Provide types_32_64.h

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc

2018-06-09T18:14:30Z

Pull sparc updates from David Miller: - a FPE signal fix that was also merged upstream - privileged ADI driver from Tom Hromatka * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: fix compat siginfo ABI regression selftests: sparc64: char: Selftest for privileged ADI driver char: sparc64: Add privileged ADI driver

rseq/selftests: Provide Makefile, scripts, gitignore

2018-06-06T09:58:35Z

A run_param_test.sh script runs many variants of the parametrizable tests. Wire up the rseq Makefile, add directory entry into MAINTAINERS file. Signed-off-by: Mathieu Desnoyers Signed-off-by: Thomas Gleixner Cc: Joel Fernandes Cc: Peter Zijlstra Cc: Catalin Marinas Cc: Dave Watson Cc: Will Deacon Cc: Shuah Khan Cc: Andi Kleen Cc: linux-kselftest@vger.kernel.org Cc: "H . Peter Anvin" Cc: Chris Lameter Cc: Russell King Cc: Andrew Hunter Cc: Michael Kerrisk Cc: "Paul E . McKenney" Cc: Paul Turner Cc: Boqun Feng Cc: Josh Triplett Cc: Steven Rostedt Cc: Ben Maurer Cc: linux-api@vger.kernel.org Cc: Andy Lutomirski Cc: Andrew Morton Cc: Linus Torvalds Link: https://lkml.kernel.org/r/20180602124408.8430-17-mathieu.desnoyers@efficios.com

selftests: sparc64: char: Selftest for privileged ADI driver

2018-06-05T18:24:55Z

Add a selftest for the sparc64 privileged ADI driver. These tests verify the read(), pread(), write(), pwrite(), and seek() functionality of the driver. The tests also report simple performance statistics: Syscall Call AvgTime AvgSize Count (ticks) (bytes) ------------------------------- read 3 119638 8133 pread 4 118164 6741 write 3 339442 8133 pwrite 4 280134 6741 seek 10 2919 0 Pass 8 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 Signed-off-by: Tom Hromatka Reviewed-by: Allen Pais Reviewed-by: Shuah Khan (Samsung OSG) Signed-off-by: David S. Miller

selftests: cgroup: add memory controller self-tests

2018-05-30T21:29:06Z

Cgroups are used for controlling the physical resource distribution (memory, CPU, io, etc) and often are used as basic building blocks for large distributed computing systems. Even small differences in the actual behavior may lead to significant incidents. The codebase is under the active development, which will unlikely stop at any time soon. Also it's scattered over different kernel subsystems, which makes regressions more probable. Given that, the lack of any tests is crying. This patch implements some basic tests for the memory controller, as well as a minimal required framework. It doesn't pretend for a very good coverage, but pretends to be a starting point. Hopefully, any following significant changes will include corresponding tests. Tests for CPU and io controllers, as well as cgroup core are next in the todo list. Signed-off-by: Roman Gushchin Cc: Tejun Heo Cc: Shuah Khan Cc: Johannes Weiner Cc: Michal Hocko Cc: Mike Rapoport Cc: kernel-team@fb.com Cc: linux-kselftest@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Tejun Heo Signed-off-by: Shuah Khan (Samsung OSG)

selftests: lib.mk: add SKIP handling and test suite name to EMIT_TESTS

2018-05-30T21:21:52Z

EMIT_TESTS which is the common function that implements run_tests target, treats all non-zero return codes from tests as failures. When tests are skipped with non-zero return code, because of unmet dependencies and/or unsupported configuration, it reports them as failed. This will lead to too many false negatives even on the tests that couldn't be run. EMIT_TESTS is changed to test for SKIP=4 return from tests to enable the framework for individual tests to return special SKIP code. Tests will be changed as needed to report SKIP instead FAIL/PASS when they get skipped. Currently just the test name is printed in the RUN_TESTS output. For example, when raw_skew sub-test from timers tests in run, the output shows just raw_skew. Include main test name when printing sub-test results. In addition, remove duplicate strings for printing common information with a new for the test header information. With this change run_kelftest.sh output for breakpoints test will be: TAP version 13 Running tests in breakpoints ======================================== selftests: breakpoints: step_after_suspend_test not ok 1..1 selftests: breakpoints: step_after_suspend_test [SKIP] selftests: breakpoints: breakpoint_test ok 1..2 selftests: breakpoints: breakpoint_test [PASS] Signed-off-by: Shuah Khan (Samsung OSG)

selftests: move RTC tests to rtc subfolder

2018-05-30T21:21:51Z

Move the RTC tests out of the timers folder as they are mostly unrelated. Keep rtcpie in timers as it only test hrtimers. Signed-off-by: Alexandre Belloni Signed-off-by: Shuah Khan (Samsung OSG)

proc: test /proc/self/wchan

2018-04-11T17:28:34Z

This patch starts testing /proc. Many more tests to come (I promise). Read from /proc/self/wchan should always return "0" as current is in TASK_RUNNING state while reading /proc/self/wchan. Link: http://lkml.kernel.org/r/20180226212006.GA742@avx2 Signed-off-by: Alexey Dobriyan Cc: Shuah Khan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds