kernel.git/tools/perf/util/evsel.c, branch linux-4.5.y

perf evlist: Add --trace-fields option to show trace fields

2016-01-08T17:23:02Z

To use dynamic sort keys, it might be good to add an option to see the list of field names. $ perf evlist -i perf.data.sched sched:sched_switch sched:sched_stat_wait sched:sched_stat_sleep sched:sched_stat_iowait sched:sched_stat_runtime sched:sched_process_fork sched:sched_wakeup sched:sched_wakeup_new sched:sched_migrate_task # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events $ perf evlist -i perf.data.sched --trace-fields sched:sched_switch: trace_fields: prev_comm,prev_pid,prev_prio,prev_state,next_comm,next_pid,next_prio sched:sched_stat_wait: trace_fields: comm,pid,delay sched:sched_stat_sleep: trace_fields: comm,pid,delay sched:sched_stat_iowait: trace_fields: comm,pid,delay sched:sched_stat_runtime: trace_fields: comm,pid,runtime,vruntime sched:sched_process_fork: trace_fields: parent_comm,parent_pid,child_comm,child_pid sched:sched_wakeup: trace_fields: comm,pid,prio,success,target_cpu sched:sched_wakeup_new: trace_fields: comm,pid,prio,success,target_cpu sched:sched_migrate_task: trace_fields: comm,pid,prio,orig_cpu,dest_cpu Committer notes: For another file, in verbose mode: # perf evlist -v --trace-fields sched:sched_switch: type: 2, size: 112, config: 0x10b, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, trace_fields: prev_comm,prev_pid,prev_prio,prev_state,next_comm,next_pid,next_prio # Signed-off-by: Namhyung Kim Cc: Andi Kleen Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Wang Nan Link: http://lkml.kernel.org/r/1452125549-1511-5-git-send-email-namhyung@kernel.org [ Replaced 'trace_fields=' with 'trace_fields: ' to make the output consistent in -v mode ] Signed-off-by: Arnaldo Carvalho de Melo

perf evsel: Disable branch flags/cycles for --callgraph lbr

2015-12-14T15:11:22Z

[The kernel patch needed for this is in tip now (b16a5b52eb9 perf/x86: Add option to disable ...) So this user tools patch to make use of it should be merged now] Automatically disable collecting branch flags and cycles with --call-graph lbr. This allows avoiding a bunch of extra MSR reads in the PMI on Skylake. When the kernel doesn't support the new flags they are automatically cleared in the fallback code. v2: Switch to use branch_sample_type instead of sample_type. Adjust description. Fix the fallback logic. Signed-off-by: Andi Kleen Acked-by: Jiri Olsa Link: http://lkml.kernel.org/r/1449879144-29074-1-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo

perf evsel: Introduce disable() method

2015-12-07T21:12:57Z

Adding perf_evsel__disable function to have complement for perf_evsel__enable function. Both will be used in following patch to factor perf_evlist__(enable|disable). Signed-off-by: Jiri Olsa Cc: Adrian Hunter Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1449133606-14429-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf evsel: Use event maps directly in perf_evsel__enable

2015-12-07T21:12:57Z

All events now share proper cpu and thread maps. There's no need to pass those maps from evlist, it's safe to use evsel maps for enabling event. Signed-off-by: Jiri Olsa Cc: Adrian Hunter Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1449133606-14429-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf evlist: Display WEIGHT sample type bit

2015-11-26T19:54:00Z

Adding WIEGHT bit_name call to display sample_type properly. $ perf evlist -v cpu/mem-loads/pp: ...SNIP... sample_type: IP|TID|TIME|ADDR|ID|CPU|DATA_SRC|WEIGHT ... Signed-off-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1448465815-27404-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf bpf: Attach eBPF filter to perf event

2015-10-29T20:16:22Z

This is the final patch which makes basic BPF filter work. After applying this patch, users are allowed to use BPF filter like: # perf record --event ./hello_world.o ls A bpf_fd field is appended to 'struct evsel', and setup during the callback function add_bpf_event() for each 'probe_trace_event'. PERF_EVENT_IOC_SET_BPF ioctl is used to attach eBPF program to a newly created perf event. The file descriptor of the eBPF program is passed to perf record using previous patches, and stored into evsel->bpf_fd. It is possible that different perf event are created for one kprobe events for different CPUs. In this case, when trying to call the ioctl, EEXIST will be return. This patch doesn't treat it as an error. Committer note: The bpf proggie used so far: __attribute__((section("fork=_do_fork"), used)) int fork(void *ctx) { return 0; } char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = 0x40300; failed to produce any samples, even with forks happening and it being running in system wide mode. That is because now the filter is being associated, and the code above always returns zero, meaning that all forks will be probed but filtered away ;-/ Change it to 'return 1;' instead and after that: # trace --no-syscalls --event /tmp/foo.o 0.000 perf_bpf_probe:fork:(ffffffff8109be30)) 2.333 perf_bpf_probe:fork:(ffffffff8109be30)) 3.725 perf_bpf_probe:fork:(ffffffff8109be30)) 4.550 perf_bpf_probe:fork:(ffffffff8109be30)) ^C# And it works with all tools, including 'perf trace'. Signed-off-by: Wang Nan Tested-by: Arnaldo Carvalho de Melo Cc: Alexei Starovoitov Cc: Brendan Gregg Cc: Daniel Borkmann Cc: David Ahern Cc: He Kuang Cc: Jiri Olsa Cc: Kaixu Xia Cc: Masami Hiramatsu Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Zefan Li Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-8-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Enable pre-event inherit setting by config terms

2015-10-28T14:19:16Z

This patch allows perf record setting event's attr.inherit bit by config terms like: # perf record -e cycles/no-inherit/ ... # perf record -e cycles/inherit/ ... So user can control inherit bit for each event separately. In following example, a.out fork()s in main then do some complex CPU intensive computations in both of its children. Basic result with and without inherit: # perf record -e cycles -e instructions ./a.out [ perf record: Woken up 9 times to write data ] [ perf record: Captured and wrote 2.205 MB perf.data (47920 samples) ] # perf report --stdio # ... # Samples: 23K of event 'cycles' # Event count (approx.): 23641752891 ... # Samples: 24K of event 'instructions' # Event count (approx.): 30428312415 # perf record -i -e cycles -e instructions ./a.out [ perf record: Woken up 5 times to write data ] [ perf record: Captured and wrote 1.111 MB perf.data (24019 samples) ] ... # Samples: 12K of event 'cycles' # Event count (approx.): 11699501775 ... # Samples: 12K of event 'instructions' # Event count (approx.): 15058023559 Cancel inherit for one event when globally enable: # perf record -e cycles/no-inherit/ -e instructions ./a.out [ perf record: Woken up 7 times to write data ] [ perf record: Captured and wrote 1.660 MB perf.data (36004 samples) ] ... # Samples: 12K of event 'cycles/no-inherit/' # Event count (approx.): 11895759282 ... # Samples: 24K of event 'instructions' # Event count (approx.): 30668000441 Enable inherit for one event when globally disable: # perf record -i -e cycles/inherit/ -e instructions ./a.out [ perf record: Woken up 7 times to write data ] [ perf record: Captured and wrote 1.654 MB perf.data (35868 samples) ] ... # Samples: 23K of event 'cycles/inherit/' # Event count (approx.): 23285400229 ... # Samples: 11K of event 'instructions' # Event count (approx.): 14969050259 Committer note: One can check if the bit was set, in addition to seeing the result in the perf.data file size as above by doing one of: # perf record -e cycles -e instructions -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.911 MB perf.data (63 samples) ] # perf evlist -v cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1 # So, the inherit bit was set in both, now, if we disable it globally using --no-inherit: # perf record --no-inherit -e cycles -e instructions -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.910 MB perf.data (56 samples) ] # perf evlist -v cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1 No inherit bit set, then disabling it and setting just on the cycles event: # perf record --no-inherit -e cycles/inherit/ -e instructions -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.909 MB perf.data (48 samples) ] # perf evlist -v cycles/inherit/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1 # We can see it as well in by using a more verbose level of debug messages in the tool that sets up the perf_event_attr, 'perf record' in this case: [root@zoo ~]# perf record -vv --no-inherit -e cycles/inherit/ -e instructions -a usleep 1 ------------------------------------------------------------ perf_event_attr: size 112 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|ID|CPU|PERIOD read_format ID disabled 1 inherit 1 mmap 1 comm 1 freq 1 task 1 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 ------------------------------------------------------------ perf_event_attr: size 112 config 0x1 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|ID|CPU|PERIOD read_format ID disabled 1 freq 1 sample_id_all 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 Signed-off-by: Wang Nan Acked-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: Alexei Starovoitov Cc: Brendan Gregg Cc: David S. Miller Cc: Li Zefan Cc: Peter Zijlstra Cc: Zefan Li Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446029705-199659-2-git-send-email-wangnan0@huawei.com [ s/u64/bool/ for the perf_evsel_config_term inherit field - jolsa] Signed-off-by: Arnaldo Carvalho de Melo

perf evsel: Print branch filter state with -vv

2015-10-21T21:12:29Z

Add a missing field to the perf_event_attr debug output. Signed-off-by: Andi Kleen Acked-by: Peter Zijlstra (Intel) Cc: Jiri Olsa Link: http://lkml.kernel.org/r/1445366797-30894-4-git-send-email-andi@firstfloor.org [ Print it between config2 and sample_regs_user (peterz)] Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Introduce 'P' modifier to request max precision

2015-10-05T19:21:11Z

The 'P' will cause the event to get maximum possible detected precise level. Following record: $ perf record -e cycles:P ... will detect maximum precise level for 'cycles' event and use it. Commiter note: Testing it: $ perf record -e cycles:P usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (9 samples) ] $ perf evlist cycles:P $ perf evlist -v cycles:P: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1, mmap2: 1, comm_exec: 1 $ Signed-off-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: David Ahern Cc: Don Zickus Cc: Kan Liang Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1444068369-20978-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf evlist: Display DATA_SRC sample type bit

2015-10-05T19:15:10Z

Adding DATA_SRC bit_name call to display sample_type properly. $ perf evlist -v cpu/mem-loads/pp: ...SNIP... sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|DATA_SRC, ... Signed-off-by: Jiri Olsa Cc: David Ahern Cc: Don Zickus Cc: Kan Liang Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1444068369-20978-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo