kernel.git/tools/perf/util/build-id.c, branch linux-3.3.y

perf tools: Rename perf_event_ops to perf_tool

2011-11-28T12:39:28Z

To better reflect that it became the base class for all tools, that must be in each tool struct and where common stuff will be put. Cc: David Ahern Cc: Frederic Weisbecker Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-qgpc4msetqlwr8y2k7537cxe@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Resolve machine earlier and pass it to perf_event_ops

2011-11-28T12:39:12Z

Reducing the exposure of perf_session further, so that we can use the classes in cases where no perf.data file is created. Cc: David Ahern Cc: Frederic Weisbecker Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-stua66dcscsezzrcdugvbmvd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Pass tool context in the the perf_event_ops functions

2011-11-28T12:38:56Z

So that we don't need to have that many globals. Next steps will remove the 'session' pointer, that in most cases is not needed. Then we can rename perf_event_ops to 'perf_tool' that better describes this class hierarchy. Cc: David Ahern Cc: Frederic Weisbecker Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-wp4djox7x6w1i2bab1pt4xxp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf session: Move threads to struct machine

2011-11-28T12:35:31Z

The 'machine' abstraction was introduced with 'perf kvm' where we could have samples for the host and multiple guests, but at the time we ended up keeping the list of all machines threads all in session->host_machine. Move the threads rb_tree to struct machine to separate the namespaces. Cc: David Ahern Cc: Frederic Weisbecker Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-mdg7sm6j3va09vtgj49gbsrp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf session: Pass evsel in event_ops->sample()

2011-03-23T22:28:58Z

Resolving the sample->id to an evsel since the most advanced tools, report and annotate, and the others will too when they evolve to properly support multi-event perf.data files. Good also because it does an extra validation, checking that the ID is valid when present. When that is not the case, the overhead is just a branch + function call (perf_evlist__id2evsel). Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Tom Zanussi LKML-Reference: Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Kill event_t typedef, use 'union perf_event' instead

2011-01-29T18:25:37Z

And move the event_t methods to the perf_event__ too. No code changes, just namespace consistency. Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Tom Zanussi LKML-Reference: Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Rename 'struct sample_data' to 'struct perf_sample'

2011-01-29T18:25:20Z

Making the namespace more uniform. Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Tom Zanussi LKML-Reference: Signed-off-by: Arnaldo Carvalho de Melo

perf session: Parse sample earlier

2010-12-05T01:05:19Z

At perf_session__process_event, so that we reduce the number of lines in eache tool sample processing routine that now receives a sample_data pointer already parsed. This will also be useful in the next patch, where we'll allow sample the identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu, timestamp) just after before every event. Also validate callchains in perf_session__process_event, i.e. as early as possible, and keep a counter of the number of events discarded due to invalid callchains, warning the user about it if it happens. There is an assumption that was kept that all events have the same sample_type, that will be dealt with in the future, when this preexisting limitation will be removed. Tested-by: Thomas Gleixner Reviewed-by: Thomas Gleixner Acked-by: Ian Munsie Acked-by: Thomas Gleixner Cc: Frédéric Weisbecker Cc: Ian Munsie Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Stephane Eranian LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Release thread resources on PERF_RECORD_EXIT

2010-07-30T21:28:42Z

For long running sessions with many threads with short lifetimes the amount of memory that the buildid process takes is too much. Since we don't have hist_entries that may be pointing to them, we can just release the resources associated with each thread when the exit (PERF_RECORD_EXIT) event is received. For normal processing we need to annotate maps with hits, and thus hist_entries pointing to it and drop the ones that had none. Will be done in a followup patch. Cc: David S. Miller Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Tom Zanussi LKML-Reference: Signed-off-by: Arnaldo Carvalho de Melo

perf buildid: add perfconfig option to specify buildid cache dir

2010-06-05T12:34:04Z

This patch adds the ability to specify an alternate directory to store the buildid cache (buildids, copy of binaries). By default, it is hardcoded to $HOME/.debug. This directory contains immutable data. The layout of the directory is such that no conflicts in filenames are possible. A modification in a file, yields a different buildid and thus a different location in the subdir hierarchy. You may want to put the buildid cache elsewhere because of disk space limitation or simply to share the cache between users. It is also useful for remote collect vs. local analysis of profiles. This patch adds a new config option to the perfconfig file. Under the tag 'buildid', there is a dir option. For instance, if you have: $ cat /etc/perfconfig [buildid] dir = /var/cache/perf-buildid All buildids and binaries are be saved in the directory specified. The perf record, buildid-list, buildid-cache, report, annotate, and archive commands will it to pull information out. The option can be set in the system-wide perfconfig file or in the $HOME/.perfconfig file. Cc: David S. Miller Cc: Frédéric Weisbecker Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Tom Zanussi LKML-Reference: <4c055fb7.df0ce30a.5f0d.ffffae52@mx.google.com> Signed-off-by: Stephane Eranian Signed-off-by: Arnaldo Carvalho de Melo