kernel.git/tools/perf/arch/arm/util, branch linux-5.13.y

perf tools: Fix various typos in comments

2021-03-23T20:13:43Z

Fix ~124 single-word typos and a few spelling errors in the perf tooling code, accumulated over the years. Signed-off-by: Ingo Molnar Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20210321113734.GA248990@gmail.com Link: http://lore.kernel.org/lkml/20210323160915.GA61903@gmail.com Signed-off-by: Arnaldo Carvalho de Melo

Merge remote-tracking branch 'torvalds/master' into perf/core

2021-03-08T13:11:33Z

To pick up the fixes sent for v5.12 and continue development based on v5.12-rc2, i.e. without the swap on file bug. This also gets a slightly newer and better tools/perf/arch/arm/util/cs-etm.c patch version, using the BIT() macro, that had already been slated to v5.13 but ended up going to v5.12-rc1 on an older version. Signed-off-by: Arnaldo Carvalho de Melo

perf cs-etm: Fix bitmap for option

2021-03-06T19:54:33Z

When set option with macros ETM_OPT_CTXTID and ETM_OPT_TS, it wrongly takes these two values (14 and 28 prespectively) as bit masks, but actually both are the offset for bits. But this doesn't lead to further failure due to the AND logic operation will be always true for ETM_OPT_CTXTID / ETM_OPT_TS. This patch defines new independent macros (rather than using the "config" bits) for requesting the "contextid" and "timestamp" for cs_etm_set_option(). Signed-off-by: Suzuki Poulouse Reviewed-by: Mike Leach Cc: Al Grant Cc: Daniel Kiss Cc: Denis Nikitin Cc: Jiri Olsa Cc: John Garry Cc: Jonathan Corbet Cc: Leo Yan Cc: Mark Rutland Cc: Mathieu Poirier Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Suzuki Poulouse Cc: Will Deacon Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-doc@vger.kernel.org Link: http://lore.kernel.org/lkml/20210206150833.42120-5-leo.yan@linaro.org [ Extract the change as a separate patch for easier review ] Signed-off-by: Leo Yan Signed-off-by: Arnaldo Carvalho de Melo

perf cs-etm: Support PID tracing in config

2021-03-02T12:48:22Z

If the kernel is running at EL2, the pid of a task is exposed via VMID instead of the CONTEXTID. Add support for this in the perf tool. This patch respects user setting if user has specified any configs from "contextid", "contextid1" or "contextid2"; otherwise, it dynamically sets config based on PMU format "contextid". Signed-off-by: Suzuki K Poulose Co-developed-by: Leo Yan Signed-off-by: Leo Yan Reviewed-by: Mike Leach Reviewed-by: Mathieu Poirier Cc: Al Grant Link: https://lore.kernel.org/r/20210213113220.292229-4-leo.yan@linaro.org Link: https://lore.kernel.org/r/20210224164835.3497311-5-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo

perf cs-etm: Fix bitmap for option

2021-03-02T12:47:41Z

When set option with macros ETM_OPT_CTXTID and ETM_OPT_TS, it wrongly takes these two values (14 and 28 prespectively) as bit masks, but actually both are the offset for bits. But this doesn't lead to further failure due to the AND logic operation will be always true for ETM_OPT_CTXTID / ETM_OPT_TS. This patch uses the BIT() macro for option bits, thus it can request the correct bitmaps for "contextid" and "timestamp" when calling cs_etm_set_option(). Signed-off-by: Suzuki K Poulose Reviewed-by: Mathieu Poirier Reviewed-by: Mike Leach Link: https://lore.kernel.org/r/20210213113220.292229-3-leo.yan@linaro.org Link: https://lore.kernel.org/r/20210224164835.3497311-4-mathieu.poirier@linaro.org [Extract the change as a separate patch for easier review] Signed-off-by: Leo Yan Signed-off-by: Arnaldo Carvalho de Melo

perf cs-etm: Update ETM metadata format

2021-03-02T12:46:28Z

The current fixed metadata version format (version 0), means that adding metadata parameter items renders files from a previous version of perf unreadable. Per CPU parameters appear in a fixed order, but there is no field to indicate the number of ETM parameters per CPU. This patch updates the per CPU parameter blocks to include a NR_PARAMs value which indicates the number of parameters in the block. The header version is incremented to 1. Fixed ordering is retained, new ETM parameters are added to the end of the list. The reader code is updated to be able to read current version 0 files, For version 1, the reader will read the number of parameters in the per CPU block. This allows the reader to process older or newer files that may have different numbers of parameters than in use at the time perf was built. Signed-off-by: Mike Leach Reviewed-by: Leo Yan Tested-by: Leo Yan Link: https://lore.kernel.org/r/20210202214040.32349-1-mike.leach@linaro.org Link: https://lore.kernel.org/r/20210224164835.3497311-2-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo

perf evlist: Use the right prefix for 'struct evlist' evsel list methods

2020-11-30T17:52:44Z

perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/, go on completing this split. Cc: Adrian Hunter Cc: Ian Rogers Cc: Jiri Olsa Cc: Namhyung Kim Signed-off-by: Arnaldo Carvalho de Melo

perf evlist: Use the right prefix for 'struct evlist' tracking event methods

2020-11-30T17:39:41Z

perf tools: No need to cache the PMUs in ARM SPE auxtrace init routine

2020-07-29T21:02:38Z

- auxtrace_record__init() is called only once, so there is no point in using a static variable to cache the results of find_all_arm_spe_pmus(), make it local and free the results after use. - Another reason is, even though SPE is micro-architecture dependent, but so far it only supports "statistical-profiling-extension-v1" and we have no chance to use multiple SPE's PMU events in Perf command. So remove the useless check code to make it clear. Signed-off-by: Wei Li Reviewed-by: Mathieu Poirier Cc: Alexander Shishkin Cc: Hanjun Guo Cc: Jiri Olsa Cc: Kim Phillips Cc: Leo Yan Cc: Mark Rutland Cc: Mike Leach Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Suzuki Poulouse Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20200724071111.35593-3-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Fix record failure when mixed with ARM SPE event

2020-07-29T21:02:38Z

When recording with cache-misses and arm_spe_x event, I found that it will just fail without showing any error info if i put cache-misses after 'arm_spe_x' event. [root@localhost 0620]# perf record -e cache-misses \ -e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.067 MB perf.data ] [root@localhost 0620]# [root@localhost 0620]# perf record -e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ \ -e cache-misses sleep 1 [root@localhost 0620]# The current code can only work if the only event to be traced is an 'arm_spe_x', or if it is the last event to be specified. Otherwise the last event type will be checked against all the arm_spe_pmus[i]->types, none will match and an out of bound 'i' index will be used in arm_spe_recording_init(). We don't support concurrent multiple arm_spe_x events currently, that is checked in arm_spe_recording_options(), and it will show the relevant info. So add the check and record of the first found 'arm_spe_pmu' to fix this issue here. Fixes: ffd3d18c20b8 ("perf tools: Add ARM Statistical Profiling Extensions (SPE) support") Signed-off-by: Wei Li Reviewed-by: Mathieu Poirier Tested-by-by: Leo Yan Cc: Alexander Shishkin Cc: Hanjun Guo Cc: Jiri Olsa Cc: Kim Phillips Cc: Mark Rutland Cc: Mike Leach Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Suzuki Poulouse Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20200724071111.35593-2-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo