kernel.git/tools/build/feature/Makefile, branch linux-5.17.y

perf build: Fix check for btf__load_from_kernel_by_id() in libbpf

2022-05-25T07:59:11Z

[ Upstream commit 0ae065a5d265bc5ada13e350015458e0c5e5c351 ] Avi Kivity reported a problem where the __weak btf__load_from_kernel_by_id() in tools/perf/util/bpf-event.c was being used and it called btf__get_from_id() in tools/lib/bpf/btf.c that in turn called back to btf__load_from_kernel_by_id(), resulting in an endless loop. Fix this by adding a feature test to check if btf__load_from_kernel_by_id() is available when building perf with LIBBPF_DYNAMIC=1, and if not then provide the fallback to the old btf__get_from_id(), that doesn't call back to btf__load_from_kernel_by_id() since at that time it didn't exist at all. Tested on Fedora 35 where we have libbpf-devel 0.4.0 with LIBBPF_DYNAMIC where we don't have btf__load_from_kernel_by_id() and thus its feature test fail, not defining HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID: $ cat /tmp/build/perf-urgent/feature/test-libbpf-btf__load_from_kernel_by_id.make.output test-libbpf-btf__load_from_kernel_by_id.c: In function ‘main’: test-libbpf-btf__load_from_kernel_by_id.c:6:16: error: implicit declaration of function ‘btf__load_from_kernel_by_id’ [-Werror=implicit-function-declaration] 6 | return btf__load_from_kernel_by_id(20151128, NULL); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors $ $ nm /tmp/build/perf-urgent/perf | grep btf__load_from_kernel_by_id 00000000005ba180 T btf__load_from_kernel_by_id $ $ objdump --disassemble=btf__load_from_kernel_by_id -S /tmp/build/perf-urgent/perf /tmp/build/perf-urgent/perf: file format elf64-x86-64 00000000005ba180 : #include "record.h" #include "util/synthetic-events.h" #ifndef HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID struct btf *btf__load_from_kernel_by_id(__u32 id) { 5ba180: 55 push %rbp 5ba181: 48 89 e5 mov %rsp,%rbp 5ba184: 48 83 ec 10 sub $0x10,%rsp 5ba188: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax 5ba18f: 00 00 5ba191: 48 89 45 f8 mov %rax,-0x8(%rbp) 5ba195: 31 c0 xor %eax,%eax struct btf *btf; #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wdeprecated-declarations" int err = btf__get_from_id(id, &btf); 5ba197: 48 8d 75 f0 lea -0x10(%rbp),%rsi 5ba19b: e8 a0 57 e5 ff call 40f940 5ba1a0: 89 c2 mov %eax,%edx #pragma GCC diagnostic pop return err ? ERR_PTR(err) : btf; 5ba1a2: 48 98 cltq 5ba1a4: 85 d2 test %edx,%edx 5ba1a6: 48 0f 44 45 f0 cmove -0x10(%rbp),%rax } Fixes: 218e7b775d368f38 ("perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions") Reported-by: Avi Kivity Link: https://lore.kernel.org/linux-perf-users/f0add43b-3de5-20c5-22c4-70aff4af959f@scylladb.com Cc: Adrian Hunter Cc: Ian Rogers Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lore.kernel.org/linux-perf-users/YobjjFOblY4Xvwo7@kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin

tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts

2022-04-13T17:27:41Z

commit 541f695cbcb6932c22638b06e0cbe1d56177e2e9 upstream. Just like its done for ldopts and for both in tools/perf/Makefile.config. Using `` to initialize PERL_EMBED_CCOPTS somehow precludes using: $(filter-out SOMETHING_TO_FILTER,$(PERL_EMBED_CCOPTS)) And we need to do it to allow for building with versions of clang where some gcc options selected by distros are not available. Tested-by: Sedat Dilek # Debian/Selfmade LLVM-14 (x86-64) Cc: Adrian Hunter Cc: Fangrui Song Cc: Florian Fainelli Cc: Ian Rogers Cc: Jiri Olsa Cc: John Keeping Cc: Leo Yan Cc: Michael Petlan Cc: Namhyung Kim Cc: Nathan Chancellor Cc: Nick Desaulniers Link: http://lore.kernel.org/lkml/YktYX2OnLtyobRYD@kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman

tools build: Filter out options and warnings not supported by clang

2022-04-13T17:27:41Z

commit 41caff459a5b956b3e23ba9ca759dd0629ad3dda upstream. These make the feature check fail when using clang, so remove them just like is done in tools/perf/Makefile.config to build perf itself. Adding -Wno-compound-token-split-by-macro to tools/perf/Makefile.config when building with clang is also necessary to avoid these warnings turned into errors (-Werror): CC /tmp/build/perf/util/scripting-engines/trace-event-perl.o In file included from util/scripting-engines/trace-event-perl.c:35: In file included from /usr/lib64/perl5/CORE/perl.h:4085: In file included from /usr/lib64/perl5/CORE/hv.h:659: In file included from /usr/lib64/perl5/CORE/hv_func.h:34: In file included from /usr/lib64/perl5/CORE/sbox32_hash.h:4: /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '(' and '{' tokens introducing statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro] ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:80:38: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' #define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \ ^~~~~~~~~~ /usr/lib64/perl5/CORE/perl.h:737:29: note: expanded from macro 'STMT_START' # define STMT_START (void)( /* gcc supports "({ STATEMENTS; })" */ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: '{' token is here ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:80:49: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' #define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro] ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:87:41: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' v ^= (v>>23); \ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: ')' token is here ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:88:3: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' } STMT_END ^~~~~~~~ /usr/lib64/perl5/CORE/perl.h:738:21: note: expanded from macro 'STMT_END' # define STMT_END ) ^ Please refer to the discussion on the Link: tag below, where Nathan clarifies the situation: acme> And then get to the problems at the end of this message, which seem acme> similar to the problem described here: acme> acme> From Nathan Chancellor <> acme> Subject [PATCH] mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO acme> acme> https://lkml.org/lkml/2020/9/1/135 acme> acme> So perhaps in this case its better to disable that acme> -Werror,-Wcompound-token-split-by-macro when building with clang? Yes, I think that is probably the best solution. As far as I can tell, at least in this file and context, the warning appears harmless, as the "create a GNU C statement expression from two different macros" is very much intentional, based on the presence of PERL_USE_GCC_BRACE_GROUPS. The warning is fixed in upstream Perl by just avoiding creating GNU C statement expressions using STMT_START and STMT_END: https://github.com/Perl/perl5/issues/18780 https://github.com/Perl/perl5/pull/18984 If I am reading the source code correctly, an alternative to disabling the warning would be specifying -DPERL_GCC_BRACE_GROUPS_FORBIDDEN but it seems like that might end up impacting more than just this site, according to the issue discussion above. Based-on-a-patch-by: Sedat Dilek Tested-by: Sedat Dilek # Debian/Selfmade LLVM-14 (x86-64) Cc: Adrian Hunter Cc: Fangrui Song Cc: Florian Fainelli Cc: Ian Rogers Cc: Jiri Olsa Cc: John Keeping Cc: Leo Yan Cc: Michael Petlan Cc: Namhyung Kim Cc: Nathan Chancellor Cc: Nick Desaulniers Link: http://lore.kernel.org/lkml/YkxWcYzph5pC1EK8@kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman

tools build: Remove needless libpython-version feature check that breaks test-all fast path

2021-12-07T00:57:53Z

Since 66dfdff03d196e51 ("perf tools: Add Python 3 support") we don't use the tools/build/feature/test-libpython-version.c version in any Makefile feature check: $ find tools/ -type f | xargs grep feature-libpython-version $ The only place where this was used was removed in 66dfdff03d196e51: - ifneq ($(feature-libpython-version), 1) - $(warning Python 3 is not yet supported; please set) - $(warning PYTHON and/or PYTHON_CONFIG appropriately.) - $(warning If you also have Python 2 installed, then) - $(warning try something like:) - $(warning $(and ,)) - $(warning $(and ,) make PYTHON=python2) - $(warning $(and ,)) - $(warning Otherwise, disable Python support entirely:) - $(warning $(and ,)) - $(warning $(and ,) make NO_LIBPYTHON=1) - $(warning $(and ,)) - $(error $(and ,)) - else - LDFLAGS += $(PYTHON_EMBED_LDFLAGS) - EXTLIBS += $(PYTHON_EMBED_LIBADD) - LANG_BINDINGS += $(obj-perf)python/perf.so - $(call detected,CONFIG_LIBPYTHON) - endif And nowadays we either build with PYTHON=python3 or just install the python3 devel packages and perf will build against it. But the leftover feature-libpython-version check made the fast path feature detection to break in all cases except when python2 devel files were installed: $ rpm -qa | grep python.*devel python3-devel-3.9.7-1.fc34.x86_64 $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC /tmp/build/perf/fixdep.o $ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:18: test-libpython-version.c:5:10: error: #error 5 | #error | ^~~~~ $ ldd ~/bin/perf | grep python libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007fda6dbcf000) $ As python3 is the norm these days, fix this by just removing the unused feature-libpython-version feature check, making the test-all fast path to work with the common case. With this: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ make -C tools/perf O=/tmp/build/perf install-bin |& head make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] $ ldd ~/bin/perf | grep python libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007f58800b0000) $ cat /tmp/build/perf/feature/test-all.make.output $ Reviewed-by: James Clark Fixes: 66dfdff03d196e51 ("perf tools: Add Python 3 support") Cc: Adrian Hunter Cc: Ian Rogers Cc: Jaroslav Škarvada Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lore.kernel.org/lkml/YaYmeeC6CS2b8OSz@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

tools: Bump minimum LLVM C++ std to GNU++14

2021-11-04T12:31:30Z

LLVM 9 (current release is LLVM 13) moved the minimum C++ version to GNU++14. Bump the version numbers in the feature test and perf build. Reviewed-by: Fangrui Song Signed-off-by: Ian Rogers Cc: Alexander Shishkin Cc: Daniel Borkmann Cc: Ingo Molnar Cc: Jiri Olsa Cc: Leo Yan Cc: Mark Rutland Cc: Michael Petlan Cc: Namhyung Kim Cc: Nathan Chancellor Cc: Nick Desaulniers Cc: Peter Zijlstra Cc: Sedat Dilek Cc: llvm@lists.linux.dev Link: https://lore.kernel.org/r/20211012021321.291635-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo

tools build: Drop needless slang include path in test-all

2021-10-26T14:24:18Z

Commit cbefd24f0aee3a5d ("tools build: Add test to check if slang.h is in /usr/include/slang/") added a proper test to check whether slang.h is in a subdirectory, and commit 1955c8cf5e26b1f7 ("perf tools: Don't hardcode host include path for libslang") removed the include path for test-libslang.bin but missed test-all.bin. Apply the same change to test-all.bin. Reviewed-by: Florian Fainelli Fixes: 1955c8cf5e26 ("perf tools: Don't hardcode host include path for libslang") Signed-off-by: John Keeping Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Nick Terrell Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20211025172314.3766032-1-john@metanate.com Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Enable libtracefs dynamic linking

2021-09-28T19:08:37Z

Currently libtracefs isn't used by perf, but there are potential improvements by using it as identified Steven Rostedt's e-mail: https://lore.kernel.org/lkml/20210610154759.1ef958f0@oasis.local.home/ This change is modelled on the dynamic libtraceevent patch by Michael Petlan: https://lore.kernel.org/linux-perf-users/20210428092023.4009-1-mpetlan@redhat.com/ v3. Adds file missed in v1 and v2 spotted by Jiri Olsa. Signed-off-by: Ian Rogers Acked-by: Jiri Olsa Cc: Alexander Shishkin Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Steven Rostedt (VMware) Cc: Tzvetomir Stoyanov (VMware) Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20210923001024.550263-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo

tools: Remove feature-sync-compare-and-swap feature detection

2021-08-09T20:02:02Z

Since the __sync functions have been removed from perf, it's needless for perf tool to test the feature sync-compare-and-swap. The feature test is not used by any other components, remove it. Signed-off-by: Leo Yan Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Alexei Starovoitov Cc: Andi Kleen Cc: Andrii Nakryiko Cc: Borislav Petkov Cc: Daniel Díaz Cc: Frank Ch. Eigler Cc: H. Peter Anvin Cc: Jiri Olsa Cc: Mark Rutland Cc: Mathieu Poirier Cc: Michael Petlan Cc: Mike Leach Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Sedat Dilek Cc: Song Liu Cc: Suzuki Poulouse Cc: Thomas Gleixner Cc: coresight@lists.linaro.org Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20210809111407.596077-10-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Enable libtraceevent dynamic linking

2021-04-29T13:31:00Z

Currently we support only static linking with kernel's libtraceevent (tools/lib/traceevent). This patch adds libtraceevent package detection and support to link perf with it dynamically. The libtraceevent package status is displayed with: $ make VF=1 LIBTRACEEVENT_DYNAMIC=1 ... ... libtraceevent: [ on ] Default behavior remains the same (static linking). Committer testing: $ make LIBTRACEEVENT_DYNAMIC=1 VF=1 O=/tmp/build/perf -C tools/perf install-bin |& grep traceevent Makefile.config:1090: *** Error: No libtraceevent devel library found, please install libtraceevent-devel. Stop. $ Signed-off-by: Michael Petlan Tested-by: Arnaldo Carvalho de Melo Cc: Jiri Olsa LPU-Reference: 20210428092023.4009-1-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo

tools: Factor Clang, LLC and LLVM utils definitions

2021-01-29T00:25:34Z

When dealing with BPF/BTF/pahole and DWARF v5 I wanted to build bpftool. While looking into the source code I found duplicate assignments in misc tools for the LLVM eco system, e.g. clang and llvm-objcopy. Move the Clang, LLC and/or LLVM utils definitions to tools/scripts/Makefile.include file and add missing includes where needed. Honestly, I was inspired by the commit c8a950d0d3b9 ("tools: Factor HOSTCC, HOSTLD, HOSTAR definitions"). I tested with bpftool and perf on Debian/testing AMD64 and LLVM/Clang v11.1.0-rc1. Build instructions: [ make and make-options ] MAKE="make V=1" MAKE_OPTS="HOSTCC=clang HOSTCXX=clang++ HOSTLD=ld.lld CC=clang LD=ld.lld LLVM=1 LLVM_IAS=1" MAKE_OPTS="$MAKE_OPTS PAHOLE=/opt/pahole/bin/pahole" [ clean-up ] $MAKE $MAKE_OPTS -C tools/ clean [ bpftool ] $MAKE $MAKE_OPTS -C tools/bpf/bpftool/ [ perf ] PYTHON=python3 $MAKE $MAKE_OPTS -C tools/perf/ I was careful with respecting the user's wish to override custom compiler, linker, GNU/binutils and/or LLVM utils settings. Signed-off-by: Sedat Dilek Signed-off-by: Daniel Borkmann Acked-by: Andrii Nakryiko Acked-by: Jiri Olsa # tools/build and tools/perf Link: https://lore.kernel.org/bpf/20210128015117.20515-1-sedat.dilek@gmail.com