kernel.git/sound/usb/stream.c, branch linux-6.9.y

ALSA: usb-audio: Stop parsing channels bits when all channels are found.

2024-03-13T13:29:22Z

If a usb audio device sets more bits than the amount of channels it could write outside of the map array. Signed-off-by: Johan Carlsson Fixes: 04324ccc75f9 ("ALSA: usb-audio: add channel map support") Message-ID: <20240313081509.9801-1-johan.carlsson@teenage.engineering> Signed-off-by: Takashi Iwai

ALSA: usb-audio: Fix init call orders for UAC1

2023-08-21T14:20:25Z

There have been reports of USB-audio driver spewing errors at the probe time on a few devices like Jabra and Logitech. The suggested fix there couldn't be applied as is, unfortunately, because it'll likely break other devices. But, the patch suggested an interesting point: looking at the current init code in stream.c, one may notice that it does initialize differently from the device setup in endpoint.c. Namely, for UAC1, we should call snd_usb_init_pitch() and snd_usb_init_sample_rate() after setting the interface, while the init sequence at parsing calls them before setting the interface blindly. This patch changes the init sequence at parsing for UAC1 (and other devices that need a similar behavior) to be aligned with the rest of the code, setting the interface at first. And, this fixes the long-standing problems on a few UAC1 devices like Jabra / Logitech, as reported, too. Reported-and-tested-by: Joakim Tjernlund Closes: https://lore.kernel.org/r/202bbbc0f51522e8545783c4c5577d12a8e2d56d.camel@infinera.com Cc: Link: https://lore.kernel.org/r/20230821111857.28926-1-tiwai@suse.de Signed-off-by: Takashi Iwai

Revert "ALSA: usb-audio: Drop superfluous interface setup at parsing"

2023-01-04T15:10:19Z

This reverts commit ac5e2fb425e1121ceef2b9d1b3ffccc195d55707. The commit caused a regression on Behringer UMC404HD (and likely others). As the change was meant only as a minor optimization, it's better to revert it to address the regression. Reported-and-tested-by: Michael Ralston Cc: Link: https://lore.kernel.org/r/CAC2975JXkS1A5Tj9b02G_sy25ZWN-ys+tc9wmkoS=qPgKCogSg@mail.gmail.com Link: https://lore.kernel.org/r/20230104150944.24918-1-tiwai@suse.de Signed-off-by: Takashi Iwai

Merge branch 'for-linus' into for-next

2022-09-06T09:04:15Z

Once again back-merge the 6.0-rc devel branch for further USB-audio and HD-audio developments. Signed-off-by: Takashi Iwai

ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()

2022-09-06T05:14:32Z

There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and the number of it's interfaces less than 4, an out-of-bounds read bug occurs when parsing the interface descriptor for this device. Fix this by checking the number of interfaces. Signed-off-by: Dongxiang Ke Link: https://lore.kernel.org/r/20220906024928.10951-1-kdx.glider@gmail.com Signed-off-by: Takashi Iwai

Merge branch 'for-linus' into for-next

2022-09-01T13:09:12Z

ALSA: usb-audio: Drop superfluous interface setup at parsing

2022-09-01T08:23:44Z

We reset each interface that is being parsed for each stream, but this is superfluous and even can lead to spurious errors. Since the interface is set up properly at opening the endpoint for each actual stream operation, let's drop the superfluous one. Link: https://lore.kernel.org/r/20220831130021.4762-1-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: usb-audio: Inform the delayed registration more properly

2022-09-01T08:23:03Z

The info message that was added in the commit a4aad5636c72 ("ALSA: usb-audio: Inform devices that need delayed registration") is actually useful to know the need for the delayed registration. However, it turned out that this doesn't catch the all cases; namely, this warned only when a PCM stream is attached onto the existing PCM instance, but it doesn't count for a newly created PCM instance. This made confusion as if there were no further delayed registration. This patch moves the check to the code path for either adding a stream or creating a PCM instance. Also, make it simpler by checking the card->registered flag instead of querying each snd_device state. Fixes: a4aad5636c72 ("ALSA: usb-audio: Inform devices that need delayed registration") Link: https://bugzilla.kernel.org/show_bug.cgi?id=216082 Link: https://lore.kernel.org/r/20220831125901.4660-1-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: usb-audio: Move tx_length quirk handling to quirk_flags

2021-08-02T07:05:57Z

There is another quirk for the transfer, and that's currently specific to Zoom R16/24, handled in create_standard_audio_quirk(). Let's move this also to the new quirk_flags. Link: https://lore.kernel.org/r/20210729073855.19043-5-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: usb-audio: Move txfr_quirk handling to quirk_flags

2021-08-02T07:05:56Z

The txfr_quirk field was meant for aligning the transfer, and it's set for certain devices in quirks-table.h. Now we can move that stuff also to the new quirk_flags gracefully, and reduce the quirks-table.h entries (that are exposed to module device table). As the quirks-table.h entries are also with the name string override, provide the corresponding entries to the usb_audio_names[] table, too. Link: https://lore.kernel.org/r/20210729073855.19043-4-tiwai@suse.de Signed-off-by: Takashi Iwai