kernel.git/sound/soc/sh, branch linux-5.0.y

ASoC: rsnd: gen: fix SSI9 4/5/6/7 busif related register address

2019-05-08T05:22:56Z

commit 8af6c521cc236534093f9e744cfa004314bfe5ae upstream. Currently each SSI unit 's busif mode/adinr/dalign address is registered by: (in busif4 case) RSND_GEN_M_REG(SSI_BUSIF4_MODE, 0x500, 0x80) RSND_GEN_M_REG(SSI_BUSIF4_ADINR,0x504, 0x80) RSND_GEN_M_REG(SSI_BUSIF4_DALIGN, 0x508, 0x80) But according to user manual 41.1.4 Register Configuration ssi9 4/5/6/7 busif mode/adinr/dalign register address ( SSI9-[4/5/6/7]_BUSIF_[MODE/ADINR/DALIGN] ) are out of this rule. This patch registers ssi9 4/5/6/7 mode/adinr/dalign register as single register, and access these registers in case of SSI9 BUSIF 4/5/6/7. Fixes: commit 8c9d75033340 ("ASoC: rsnd: ssiu: Support BUSIF other than BUSIF0") Signed-off-by: Jiada Wang Signed-off-by: Timo Wischer Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: rsnd: ssiu: correct shift bit for ssiu9

2019-02-07T12:04:44Z

Currently "0xf << 36" is used to clear SSIU-9 internal buffer state, which overflows 32-bit value according to user reference manual, it is always bit4 ~ bit7 of SSI_SYS_STATUS[1,3,5,7] registers indicate SSIU-9's buffer state, so "0xf << 4" should be used. This patch fix incorrect shifting issue in SSIU-9 case Fixes: commit b7169ddea2f2 ("ASoC: rsnd: remove RSND_REG_ from rsnd_reg") Signed-off-by: Jiada Wang Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown

ASoC: rsnd: fixup rsnd_ssi_master_clk_start() user count check

2019-02-06T17:44:18Z

commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") added new rsnd_ssi_prepare() and moved rsnd_ssi_master_clk_start() to .prepare. But, ssi user count (= ssi->usrcnt) is incremented at .init (= rsnd_ssi_init()). Because of these timing exchange, ssi->usrcnt check at rsnd_ssi_master_clk_start() should be adjusted. Otherwise, 2nd master clock setup will be no check. This patch fixup this issue. Fixes: commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") Reported-by: Yusuke Goda Reported-by: Valentine Barshak Signed-off-by: Kuninori Morimoto Tested-by: Yusuke Goda Signed-off-by: Mark Brown

ASoC: rsnd: fixup MIX kctrl registration

2019-02-02T15:41:29Z

Renesas sound device has many IPs and many situations. If platform/board uses MIXer, situation will be more complex. To avoid duplicate DVC kctrl registration when MIXer was used, it had original flags. But it was issue when sound card was re-binded, because no one can't cleanup this flags then. To solve this issue, commit 9c698e8481a15237a ("ASoC: rsnd: tidyup registering method for rsnd_kctrl_new()") checks registered card->controls, because if card was re-binded, these were cleanuped automatically. This patch could solve re-binding issue. But, it start to avoid MIX kctrl. To solve these issues, we need below. To avoid card re-binding issue: check registered card->controls To avoid duplicate DVC registration: check registered rsnd_kctrl_cfg To allow multiple MIX registration: check registered rsnd_kctrl_cfg This patch do it. Fixes: 9c698e8481a15237a ("ASoC: rsnd: tidyup registering method for rsnd_kctrl_new()") Reported-by: Jiada Wang Signed-off-by: Kuninori Morimoto Tested-By: Jiada Wang Signed-off-by: Mark Brown

ASoC: dma-sh7760: cleanup a debug printk

2019-01-03T16:32:48Z

The intent was to print the address as a hexadecimal but there is an extra "u" in the "0x%08ulx" format specification so it is displayed as decimal. Fixes: aef3b06ac697 ("[ALSA] SH7760 ASoC support") Signed-off-by: Dan Carpenter Signed-off-by: Mark Brown

Merge branch 'for-4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-4.21 intel dep

2018-12-13T14:36:46Z

ASoC: rsnd: remove RSND_REG_ from rsnd_reg

2018-12-12T16:17:45Z

Current rsnd is using RSND_REG_xxx for register naming, and using RSND_REG_##f style macro for read/write. The biggest reason why it uses this style is that we can avoid non-existing register access. But, its demerit is sequential register access code will be very ugly. Current rsnd driver is well tested, so, let's remove RSND_REG_ from rsnd_reg, and cleanup sequential register access code. Signed-off-by: Kuninori Morimoto Tested-by: Hiroyuki Yokoyama Signed-off-by: Mark Brown

ASoC: rsnd: add missing TDM Split mode support for simple-card

2018-12-04T15:51:12Z

commit f69f452243e4e1 ("ASoC: rsnd: add TDM Split mode support") added TDM Split mode support for rsnd driver. But, it cares audio-graph-card style only. We can't use TDM Split mode on simple-card style now. This patch fixup this issue. Fixes: f69f452243e4e1 ("ASoC: rsnd: add TDM Split mode support") Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown

ASoC: rsnd: fixup mod ID for CTU regmap read/write

2018-12-04T15:50:56Z

commit c16015f36cc12824 ("ASoC: rsnd: add .get_id/.get_id_sub") add new .get_id/.get_id_sub to indicate module ID/subID. It is used for SSIU and CTU. In SSIU case, subID indicates BUSIF, but register settings is based on SSIU ID. OTOH, in CTU case, subID indicates CTU channel, and register settings is based on it. This means regmap read/write function needs to care it. This patch fixup this issue. It can't play MIXed sound without this patch. Fixes: c16015f36cc12824 ("ASoC: rsnd: add .get_id/.get_id_sub") Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown

ASoC: rsnd: indicates Channel and Mode for debug

2018-12-04T15:48:35Z

For TDM debug purpose, indicating Channel and Mode is very useful. This patch indicate it if it has #define DEBUG Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown