kernel.git/sound/soc/codecs/rt5514.c, branch linux-5.0.y

Merge remote-tracking branches 'regmap/topic/noinc' and 'regmap/topic/single-rw' into regmap-next

2018-10-21T11:07:26Z

regmap: split up regmap_config.use_single_rw

2018-09-07T12:03:55Z

Split regmap_config.use_single_rw into use_single_read and use_single_write. This change enables drivers of devices which only support bulk operations in one direction to use the regmap_bulk_*() functions for both directions and have their bulk operation split into single operations only when necessary. Update all struct regmap_config instances where use_single_rw==true to instead set both use_single_read and use_single_write. No attempt was made to evaluate whether it is possible to set only one of use_single_read or use_single_write. Signed-off-by: David Frey Signed-off-by: Mark Brown

ASoC: rt5514: Fix the issue of the delay volume applied again

2018-08-16T11:10:43Z

After our evaluation, we need to modify the default values to make sure the volume applied immediately. Signed-off-by: Oder Chiou Signed-off-by: Mark Brown

ASoC: rt5514: Fix the issue of the delay volume applied

2018-07-24T10:57:05Z

The patch fixes the issue of the delay volume applied. Signed-off-by: Oder Chiou Signed-off-by: Mark Brown

ASoC: rt5514: Add the missing register in the readable table

2018-04-16T16:54:59Z

The patch adds the missing register in the readable table. Signed-off-by: Oder Chiou Signed-off-by: Mark Brown

ASoC: rt5514: Fix uninitialized calibration value

2018-03-01T19:31:50Z

With gcc-4.1.2, if CONFIG_SND_SOC_RT5514_SPI is not set: sound/soc/codecs/rt5514.c: In function ‘rt5514_dsp_voice_wake_up_put’: sound/soc/codecs/rt5514.c:363: warning: ‘buf[0]’ is used uninitialized in this function sound/soc/codecs/rt5514.c:363: warning: ‘buf[1]’ is used uninitialized in this function sound/soc/codecs/rt5514.c:363: warning: ‘buf[2]’ is used uninitialized in this function sound/soc/codecs/rt5514.c:363: warning: ‘buf[3]’ is used uninitialized in this function Fix this by initializing the buffer with zeroes, to avoid random bits being written to the calibration register later. Fixes: fc9cab05837639ce ("ASoC: rt5514: The DSP clock can be calibrated by the other clock source") Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown

ASoC: rt5514: Fix rt5514_spi_burst_read() buffer passing

2018-03-01T19:31:49Z

rt5514_dsp_voice_wake_up_put() passes "(u8 *)&buf" to rt5514_spi_burst_read(), where the cast is needed to silence a compiler warning: sound/soc/codecs/rt5514.c: In function ‘rt5514_dsp_voice_wake_up_put’: sound/soc/codecs/rt5514.c:357: warning: passing argument 2 of ‘rt5514_spi_burst_read’ from incompatible pointer type However, as the variable is declared as an array ("u8 buf[8]"), the function should just pass "buf" instead. Fixes: fc9cab05837639ce ("ASoC: rt5514: The DSP clock can be calibrated by the other clock source") Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown

ASoC: rt5514: replace codec to component

2018-02-12T09:45:58Z

Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown

Merge remote-tracking branches 'asoc/topic/rl6231', 'asoc/topic/rt5514' and 'asoc/topic/rt5645' into asoc-next

2018-01-05T12:44:00Z

ASoC: rt5514: Make sure the DMIC delay will be happened after normal SUPPLY widgets power on

2017-11-24T12:47:58Z

The patch makes sure the DMIC delay will be happened after normal SUPPLY widgets power on. If there are some platforms that provide the MCLK using the SUPPLY widget, it will make sure the delay time is helpful. Signed-off-by: Oder Chiou Signed-off-by: Mark Brown