kernel.git/sound/soc/codecs/Makefile, branch master

ASoC: cs35l56-shared: KUnit tests for onchip speaker ID gpios

2026-02-05T16:58:12Z

Add KUnit testing of: cs35l56_check_and_save_onchip_spkid_gpios() cs35l56_configure_onchip_spkid_pads() cs35l56_read_onchip_spkid() The test consists of: - A mock regmap that simulates the pad and pin config registers. - Parameterization of the pin list, pulls list, a simulated value for each pin and the speaker ID value that this should produce. - A self-test of the simulated pin and GPIO registers. - A test that the value returned by cs35l56_read_onchip_spkid() is correct. - A test that the pin pull-up/down are set correctly by cs35l56_configure_onchip_spkid_pads() - A test that cs35l56_configure_onchip_spkid_pads() and cs35l56_read_onchip_spkid(0 return the expected values if cs35l56_base->num_onchip_spkid_gpios == 0. - A test that cs35l56_check_and_save_onchip_spkid_gpios() saves the configuration. - A test that cs35l56_check_and_save_onchip_spkid_gpios() rejects illegal GPIO numbers. - A test that cs35l56_check_and_save_onchip_spkid_gpios() rejects illegal pull types. Signed-off-by: Richard Fitzgerald Link: https://patch.msgid.link/20260205164838.1611295-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown

ASoC: codec: Remove ak4641/pxa2xx-ac97 and convert to

2026-01-28T00:37:49Z

Merge series from "Peng Fan (OSS)" : The main goal is to convert drivers to use GPIO descriptors. While reading the code, I think it is time to remove ak4641 and pxa2xx-ac97 driver, more info could be found in commit log of each patch. Then only need to convert sound/arm/pxa2xx-ac97-lib.c to use GPIO descriptors. Not have hardware to test the pxa2xx ac97.

ASoC: codec: Remove ak4641

2026-01-27T12:45:54Z

Since commit d6df7df7ae5a0 ("ARM: pxa: remove unused board files"), there has been no in-tree user of the AK4641 codec driver. The last user (HP iPAQ hx4700) was a non-DT PXA board file that instantiated the device via I2C board data; that code was removed as part of the PXA board-file purge. The AK4641 driver was introduced ~2011 and still probes only via the I2C device-ID table ('.id_table'), without an 'of_match_table', so there are no upstream Devicetree users to retain. With no in-tree users left, remove the driver. Signed-off-by: Peng Fan Reviewed-by: Bartosz Golaszewski Acked-by: Andy Shevchenko Link: https://patch.msgid.link/20260122-sound-cleanup-v1-1-0a91901609b8@nxp.com Signed-off-by: Mark Brown

ASoC: cs35l56: Add KUnit testing of cs35l56_set_fw_suffix()

2026-01-21T13:41:24Z

Add a new KUnit test for testing the creation of firmware name qualifiers in the cs35l56 driver. The initial set of test cases are for cs35l56_set_fw_suffix(). Signed-off-by: Richard Fitzgerald Link: https://patch.msgid.link/20260121132243.1256019-6-rf@opensource.cirrus.com Signed-off-by: Mark Brown

ASoC: rt5575: Add the codec driver for the ALC5575

2026-01-05T13:18:52Z

The ALC5575 integrates an audio DSP that typically loads its firmware from an external flash via its own SPI host interface. In certain hardware configurations, the firmware can alternatively be loaded through the SPI client interface. The driver provides basic mute and volume control functions. When the SPI client interface is enabled, firmware loading is handled by the SPI driver. Signed-off-by: Oder Chiou Link: https://patch.msgid.link/17c36d07af44ffb1d600977955da95852f8d60f3.1767148150.git.oder_chiou@realtek.com Signed-off-by: Mark Brown

ASoC: codecs: Modify awinic amplifier dsp read and write functions

2025-11-28T21:35:38Z

Modify the dsp read and write functions of the chip and normalize the dsp read and write functions of all awinic amplifier Signed-off-by: Weidong Wang Link: https://patch.msgid.link/20251128130323.628091-1-wangweidong.a@awinic.com Signed-off-by: Mark Brown

ASoC: nau8325: add missing build config

2025-11-26T12:30:22Z

This configuration was missing from the initial commit. Found by Jiri Benc Fixes: c0a3873b9938 ("ASoC: nau8325: new driver") Cc: Seven Lee Signed-off-by: Jaroslav Kysela Link: https://patch.msgid.link/20251126091759.2490019-3-perex@perex.cz Signed-off-by: Mark Brown

ASoC: cs530x: Add SPI bus support for cs530x parts

2025-10-27T11:10:34Z

Cirrus Logic cs530x device family has 2 control buses I2C and SPI. This patch adds SPI support. Signed-off-by: Vitaly Rodionov Link: https://patch.msgid.link/20251023090327.58275-13-vitalyr@opensource.cirrus.com Signed-off-by: Mark Brown

ASoc: tas2783A: Add soundwire based codec driver

2025-09-22T12:00:39Z

TAS2783 is mono digital input class-D Smart Amplifier based on MIPI Alliance Soundwire interface. The driver supports loading the algorithm coefficients for one or more tas2783 chips. Signed-off-by: Niranjan H Y Reviewed-by: Bard Liao Link: https://patch.msgid.link/20250912083624.804-2-niranjan.hy@ti.com Signed-off-by: Mark Brown

ASoC: codecs: wcd93xxx: remove code duplication

2025-09-19T13:27:28Z

Merge series from Srinivas Kandagatla : All the Qualcomm WCD codecs and WCD based codecs have lots of code in common, resulting in lot of duplicate code. This series is an attempt to clean some of this by moving the common code to wcd-common library or to soundwire helper functions. Currently I have done cleanups for 4 codecs wcd934x, wcd937x, wcd938x and wcd939x, however any new Qualcomm codecs can avoid this duplication by using the wcd-common library. I have also added two helpers of_sdw_find_device_by_node() and sdw_slave_get_current_bank() in soundwire layer for the codecs to use them, this series was already acked by Soundwire maintainer Vinod. As original cleanup series was depending on the new soundwire interfaces I have combined both the series as they are cleaning up code duplications. As am touching the same codec drivers, 2 bug fixes are also added at the start of the series. There is still lot of code that is duplicate, but this is just a starting point for such cleanups. I have tested this on T14s, any testing is appreciated.