kernel.git/sound/isa/wss, branch linux-3.7.y

ALSA: wss_lib: Fix resume on Yamaha OPL3-SAx

2012-07-16T09:24:05Z

Yamaha OPL3-SAx chips don't resume properly when playback is running - garbage is played after resume. Restoring the CS4231_PLAYBK_FORMAT register last fixes the problem. Signed-off-by: Ondrej Zary Signed-off-by: Takashi Iwai

ALSA: wss_lib: fix suspend/resume

2012-07-16T09:23:45Z

By setting SNDRV_PCM_INFO_RESUME, wss_lib claims that it can restore the card state fully on resume. But in fact, it can't as DMA is not restored so any playback/capture running during suspend will fail to continue after resume. Remove SNDRV_PCM_INFO_RESUME flag from pcm info field to fix the problem. Signed-off-by: Ondrej Zary Signed-off-by: Takashi Iwai

sound: Add module.h to the previously silent sound users

2011-10-31T23:31:21Z

Lots of sound drivers were getting module.h via the implicit presence of it in but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker

sound: irq: Remove IRQF_DISABLED

2011-09-22T09:19:20Z

Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang Acked-by: Peter Ujfalusi Acked-by: Mark Brown Signed-off-by: Takashi Iwai

Fix common misspellings

2011-03-31T14:26:23Z

Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi

ALSA: opti93x: move controls definitions to opti93x driver

2009-12-11T13:43:16Z

Move OPTi93x controls definitions to the opti93x driver from the common wss-lib library module. These controls are used only by the opti93x driver. Also, fix capture source names. They are the same as opl3sa2 names. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai

ALSA: cs4236: update control names

2009-11-18T06:23:16Z

Update control names to be more closer to their meaning. Change the "Mono" name to the "Beep" as this line is usually used to forward the PC beeper signal to sound card's output. Update names for both cs423x and wss. Clean up cs4235 controls according to the cs4235 doc. Rename some of the cs4235 controls to be consistent with the cs4236's ones. Also, delete one misnamed cs4231 register define. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai

ALSA: cs4236: detect chip in one pass

2009-11-05T17:10:25Z

The cs4236 was two step detection with call to the snd_wss_free() between two steps. The snd_wss_free() did not free a sound device created in the snd_wss_create(). This caused an OOPS during module removal as the same sound device was released twice. The same OOPS happened if the cs4236 module loading failed. Fix this by adapting the snd_cs4236_create() to correctly work with chips less capable then cs4236. The snd_cs4236_create() behaves the same as the snd_wss_create() if the chip is less capable than the cs4236. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai

ALSA: wss: reuse CS4231 controls for AD1848

2009-10-11T16:02:58Z

The C4231 control set is a superset of the AD1848 control set so reuse the CS4231 controls definitions for the AD1848. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai

ALSA: wss: convert CS4231 mixer to dB scale

2009-10-10T08:55:10Z

Convert CS4231 mixer to dB scale after AD1848 mixer. Also, add missing microphone boost control for the AD1848 and correct wrong bits for loopback volume on the AD1848. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai